Error in enhancement..Cannot start wizard after that
Hello ,
Can you please help me with this..
1. There was an enhancement with customfield ( checkbox ). This was not selected for 'Search'...I wanted this in the 'Search' screen of CRM UI, hence ticked the 'Search' ( This I did by choosing ' Start Wizard' and then proceeding )...This resulted in a short dump..Details are as follows : Category ABAP Programming Error
Runtime Errors SAPSQL_WHERE_UNKNOWN_OPERATOR
Except. CX_SY_DYNAMIC_OSQL_SYNTAX
ABAP Program SAPLOXT_TASK_API
Application Component CA-GTF-EEW-SRV
After this, the enhancement is in a error state ...and 'Start Wizard' is disabled...
Can you suggest me as to how to proceed to rectify the error and get the 'Start Wizard' enabled...so that I can proceed with the field being available for 'Search' in CRM UI.
2. How do I compare different versions of enhancements?Because there is an option of going back to older version ( I would like to see whats in the older version )
Thanks in advance.
Regards,
Monica
Nikhil.
Did you ever solve this issue. I see the same issue?
Similar Messages
-
EEWB Enhancement in Red , error state...Cannot 'Start Wizard' after that..
Hello ,
Can you please help me with this..
1. There was an enhancement with customfield ( checkbox ). This was not selected for 'Search'...I wanted this in the 'Search' screen of CRM UI, hence ticked the 'Search' ( This I did by choosing ' Start Wizard' and then proceeding )...This resulted in a short dump..Details are as follows : Category ABAP Programming Error
Runtime Errors SAPSQL_WHERE_UNKNOWN_OPERATOR
Except. CX_SY_DYNAMIC_OSQL_SYNTAX
ABAP Program SAPLOXT_TASK_API
Application Component CA-GTF-EEW-SRV
After this, the enhancement is in a error state ...and 'Start Wizard' is disabled...
Can you suggest me as to how to proceed to rectify the error and get the 'Start Wizard' enabled...so that I can proceed with the field being available for 'Search' in CRM UI.
2. How do I compare different versions of enhancements?Because there is an option of going back to older version ( I would like to see whats in the older version )
Thanks in advance.
Regards,
MonicaYou can use following reports to check the custom field errors.
AXT_EXT_ANALYZE
AXT_EXT_GENERATE
AXT_EXT_RESET
AXT_EXT_ACTIVATE_LOCAL
AXT_EXT_CHANGE_PACKAGE -
Kded crashes on amarok quit in gnome, cannot start jack after
I'm running amarok in gnome and it works fine except that I'm getting the KDE crash handler telling me that kded has cashed just after I quit amarok. And amarok seems to keep holding onto hw:0, so I cannot start jack after. Which prosess could I kill to make jack start?
ThanksZestyTang:
If you import the modified folder you'll just end up with duplicates as the ratings and other metadata will be lost. It's starting over from scratch.
alexkess:
Since it works OK in the other account it might be a preference file other than iPhoto's. Try the following:
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
5 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
OT -
U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7
U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
Picture link (hosted on photobucket.com)
I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
I tried to uninstall this and let windows update install it again => not worked, same problem.
I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this threadWhat kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.
-
My Mac Book Pro started having issues. I tried to relaod the operating system and it worked for a moment. When I tried to do a time machine back up it failed.
Now itr Shuts down at startup attempt. Tried reloading OSX and will not start up after that.Dr.Conga,
did you try to do a Time Machine backup from your MacBook Pro, or a Time Machine restoration to it?
Are you trying to reload your current version of OS X (10.7.4, to judge from your signature), or are you trying to reload the version of Mac OS X that came on the grey installation DVDs that originally came with your MacBook Pro? -
I get an error that says that LR5 encountered a preview cache error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?
Go to the folder with you Lightroom Catalog (usually in Pictures) and delete the folder ending in .lrpreviews
This contains the previews for the files Lightroom has linked to. They will need to be rebuilt which can be done while working or selecting an amount you want to rebuild and accessing the rebuild command in the Library Dropdown menu... -
I purchased the August 2012 Edition of Consumer Reports and I get (Error During Download Cannot start the download because the file is missing of invalid)
Contact support and see if they cna give you a fresh copy. It's probably with the file..
-
In running the datalgr example, I get the error NIDAQ32.dll cannot start.... then program exits. Version of NI DAQ is 6.9.2, using MS C++.
Since this is a DAQ question more than a Measurement Studio for VC++ question, I'd recommend you repost it to the DAQ forum.
Cheers,
Azucena -
After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .
Hello Wilson@w,
The article linked below details the process of placing your device in recovery mode in order to complete the update.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Allen -
My IPad2 will not sync with my iMac anymore, keeps giving me an error of failure to start sync after it has tried for 2-3 minutes
Cenzon-
Are you syncing over WiFi or over the USB cable? Try doing the opposite.
Also try a different USB port on the iMac.
Fred -
I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location “/var/folders/lK/lKbPbq2OF0aPCbMnDc erE TI/-Tmp-”
I've also been getting others errors about cannot create or modify temporary files when trying to install other programs. Also some of my documents on my computer will not open and crash.
Any help would be helpful.
I've tried doing this as read not sure if it helps:
ls -Odel $TMPD
This is what I had in response:
drwxr-xr-x 36 root admin - 1224 Dec 9 00:29 /var/folders/lK/lKbPbq2OF0aPCbMnDc+erE+++TI/-Tmp-/Which os version are you using?
What is Lighthouse?
Please describe in detail all you have attempted to do in order to resolve the issue. -
I have a desktop PC Win7 with MS Ofc 2010. I have iCloud on Macbook, Laptop Win 8 with MS Ofc 2013, iPhone synched. I cannot get iCloud to accept the Outlook, Calendar, Contacts, Tasks with checking the box and starting the upload.
Error Message: Setup cannot be started because of an unexpected error. Should I delete iCloud and reload and try again? What are suggestions from the community? Sent report to iCloud.Hi Clifford,
Take a look at the article below, it provides tips that should help you resolve the iCloud setup issue.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Symptoms
After installing or upgrading to iCloud Control Panel 3.0, iCloud setup cannot complete.
Resolution
You may see one of several messages. Your troubleshooting steps will differ depending upon the message:
“Your setup couldn't start because your username or password is incorrect. Go to the iCloud Control Panel, sign out, and sign back in.”
Click Cancel to close the message.
Click "Sign out" on the iCloud Control Panel.
Reenter your Apple ID and password, then click Sign in.
“Your setup couldn't be started because the iCloud server stopped responding.”
or “Your setup couldn't be started because the iCloud server couldn't be reached.”
Check the System Status page to make sure there aren't any issues affecting the settings you've chosen in iCloud Control Panel. If you are setting up iCloud for use with Outlook, check that there aren't any issues with Mail, Contacts, Calendars, or Reminders.
Make sure your computer is online. In a browser, attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud contacts, calendars and tasks cannot be added to Outlook. If you're using Windows 8, review the instructions for resolving network problems. If you're using Windows 7, review the instructions for troubleshooting internet connection issues.
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
-Jason -
Cannot start FIMSynchronizationService after applying ServicePack for SharePoint 2013 Server
Dear all,
Yesterday we have applied SP1 for SharePoint 2013 on our SharePoint Farm (1 one server + 1 db server). Unfortunately the FIMSynchronizationService (Forefront Identity Manager Synchronization Service) will not start anymore after applying the SP.
The SharePoint Services: User Profile Synchronisation Service and User Profile Service are started in Central Admin (can started /stopped without problems). Only the Windows Services FIMSynchronizationService cannot be started anymore.
What can be the cause of this problem?
The following application event is visible in the Event Viewer:
ID 6324
The server encountered an unexpected error and stopped.
"BAIL: MMS(1856): sql.cpp(8490): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): sql.cpp(8533): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): server.cpp(260): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): server.cpp(3860): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): service.cpp(1539): 0x80231334 (The sql connection string has unsupported values.)
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2145184972. This is retry number 0.
BAIL: MMS(1856): clrhost.cpp(283): 0x80131022
BAIL: MMS(1856): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(1856): server.cpp(251): 0x80131022
BAIL: MMS(1856): server.cpp(3860): 0x80131022
BAIL: MMS(1856): service.cpp(1539): 0x80131022
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 1.
BAIL: MMS(1856): clrhost.cpp(283): 0x80131022
BAIL: MMS(1856): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(1856): server.cpp(251): 0x80131022
BAIL: MMS(1856): server.cpp(3860): 0x80131022
BAIL: MMS(1856): service.cpp(1539): 0x80131022
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 2.
BAIL: MMS(1856): clrhost.cpp(283): 0x80131022
BAIL: MMS(1856): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(1856): server.cpp(251): 0x80131022
BAIL: MMS(1856): server.cpp(3860): 0x80131022
BAIL: MMS(1856): service.cpp(1539): 0x80131022
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 3.
BAIL: MMS(1856): service.cpp(1002): 0x80131022
Forefront Identity Manager 4.0.24501. Try to reboot server and run PSCONFIG wizard.
2. Check if permission of sync account has not changes (SPECIALLY Replicate directory change )permission on AD or local computer
3. what account are you logged in with.
If possible provide ULS log details
If this helped you resolve your issue, please mark it Answered
Hello, thanks for your reply,
We have done the following:
1. rebooted server
2. run psconfig: Psconfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -c
installfeatures
3. result: complaining about webconfig.accsrv.xml (removed this and tried again, then complaining about other web.config file)
9/24/2014 19:05:14 9 ERR Task applicationcontent has failed with an unknown exception
09/24/2014 19:05:14 9 ERR Exception: System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML
heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ExceptionInfo for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ExceptionInfo is Er is een uitzondering van het type {0} opgetreden. Aanvullende informatie over de uitzondering:
{1}
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ExceptionInfo for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ExceptionInfo is Er is een uitzondering van het type {0} opgetreden. Aanvullende informatie over
de uitzondering: {1}
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 ERR Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie over de uitzondering: Het webconfiguratiebestand C:\Program
Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is
ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ExceptionInfo for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ExceptionInfo is Er is een uitzondering van het type {0} opgetreden. Aanvullende informatie over
de uitzondering: {1}
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 INF Entering function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key global
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found command global in collection
09/24/2014 19:05:14 9 INF Leaving function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key initialize
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found command initialize in collection
09/24/2014 19:05:14 9 INF Leaving function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function Command.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key SINGLESERVER
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found parameter SINGLESERVER in collection
09/24/2014 19:05:14 9 INF Leaving function Command.this[string key]
09/24/2014 19:05:14 9 INF Entering function Command.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key upgradesessionid
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found parameter upgradesessionid in collection
09/24/2014 19:05:14 9 INF Leaving function Command.this[string key]
09/24/2014 19:05:14 9 INF Releasing the farm upgrade lock in common exception handler.
09/24/2014 19:05:14 9 INF Entering function TaskBase.OnTaskStop
09/24/2014 19:05:14 9 INF Creating the OnTaskStop event for task applicationcontent
09/24/2014 19:05:14 9 ERR Task applicationcontent has failed
09/24/2014 19:05:14 9 INF friendlyMessage for task applicationcontent is Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie
over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
09/24/2014 19:05:14 9 INF debugMessage for task applicationcontent is Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie
over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is
ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 9 INF Entering function TaskBase.FireTaskStateChanged
09/24/2014 19:05:14 9 INF Firing the OnTaskStateChanged event for task applicationcontent
09/24/2014 19:05:14 9 INF Entering function TaskDriver.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ApplicationContentTaskDisplayName for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ApplicationContentTaskDisplayName is bestanden met inhoud voor toepassingen installeren
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Received an TaskStateEventHandler event. task:applicationcontent TaskBase.State:stopped
09/24/2014 19:05:14 9 INF Entering function TasksQueue.IncrementTaskFailed
09/24/2014 19:05:14 9 INF Incremented the number of tasks failed to 1
09/24/2014 19:05:14 9 INF Leaving function TasksQueue.IncrementTaskFailed
09/24/2014 19:05:14 9 INF Task applicationcontent has stopped and failed. Total failed is now 1
09/24/2014 19:05:14 9 INF Leaving function TaskDriver.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Entering function CommandLine.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Received an TaskStateEventHandler event. task:applicationcontent TaskBase.State:stopped
09/24/2014 19:05:14 9 INF Task applicationcontent has stopped and failed. Total failed is now 1
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ApplicationContentTaskFailConfigDisplayLabel for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ApplicationContentTaskFailConfigDisplayLabel is Kan de bestanden met inhoud voor toepassingen
niet installeren.
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Last message from task applicationcontent is Er is een uitzondering van het type System.IO.InvalidDataException opgetreden.
Aanvullende informatie over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of
dit element is ongeldig.
09/24/2014 19:05:14 9 INF Leaving function CommandLine.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Leaving function TaskBase.FireTaskStateChanged
09/24/2014 19:05:14 9 INF Leaving function TaskBase.OnTaskStop
09/24/2014 19:05:14 9 INF Leaving function TaskThread.ExecuteTask
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is ApplicationContentTaskDisplayName for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id ApplicationContentTaskDisplayName is bestanden met inhoud voor toepassingen installeren
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 ERR Task bestanden met inhoud voor toepassingen installeren failed, so stopping execution of the engine
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is ApplicationContentTaskFailConfigDisplayLabel for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id ApplicationContentTaskFailConfigDisplayLabel is Kan de bestanden met inhoud voor toepassingen niet installeren.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 ERR Kan de bestanden met inhoud voor toepassingen niet installeren.
Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft
geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is
ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 1 INF Entering function TaskDriver.NotifyTaskSummary
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is TotalTasksRan for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id TotalTasksRan is Totaal aantal uitgevoerde configuratie-instellingen: {0}
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalran, TaskDriverEventArgs.EventType.notify,
message: Totaal aantal uitgevoerde configuratie-instellingen: 4
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Totaal aantal uitgevoerde configuratie-instellingen: 4
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is TotalTasksSucceeded for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id TotalTasksSucceeded is Totaal aantal geslaagde configuratie-instellingen: {0}
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalsuccess, TaskDriverEventArgs.EventType.notify,
message: Totaal aantal geslaagde configuratie-instellingen: 3
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Totaal aantal geslaagde configuratie-instellingen: 3
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is TotalTasksFailed for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id TotalTasksFailed is Totaal aantal mislukte configuratie-instellingen: {0}
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalfail, TaskDriverEventArgs.EventType.notify,
message: Totaal aantal mislukte configuratie-instellingen: 2
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Totaal aantal mislukte configuratie-instellingen: 2
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.NotifyTaskSummary
09/24/2014 19:05:14 1 ERR One or more configuration tasks has failed or some tasks were not run
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is PostSetupConfigurationStoppingSucceeded for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id PostSetupConfigurationStoppingSucceeded is De configuratie van SharePoint-producten is gestopt.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverStopping
09/24/2014 19:05:14 1 INF Sending a task driver stopping event: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType.stopping, De configuratie van SharePoint-producten
is gestopt.
09/24/2014 19:05:14 1 INF Entering function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Acquiring the writer lock to change the state
09/24/2014 19:05:14 1 INF Current state of the task driver is neverrun. You want to change it to stoppingrun
09/24/2014 19:05:14 1 INF Changed state of the task driver to neverrun
09/24/2014 19:05:14 1 INF Released the writer lock to change the state
09/24/2014 19:05:14 1 INF Leaving function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType stopping, message
De configuratie van SharePoint-producten is gestopt.
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverStopping
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.ExecuteTasks
09/24/2014 19:05:14 1 ERR One or more configuration tasks has failed to execute
09/24/2014 19:05:14 1 INF Entering function TaskDriver.Stop
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id PostSetupConfigurationFailedEventLog is De configuratie van SharePoint-producten is mislukt. Voor een goede werking moet u de configuratie
opnieuw uitvoeren. Als u een juiste diagnose wilt stellen van dit probleem, kunt u de gedetailleerde foutinformatie op {0} raadplegen, het probleem oplossen en de configuratiewizard opnieuw uitvoeren.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 ERR De configuratie van SharePoint-producten is mislukt. Voor een goede werking moet u de configuratie opnieuw uitvoeren. Als u een juiste diagnose wilt stellen van dit
probleem, kunt u de gedetailleerde foutinformatie op C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_24_2014_19_4_25_376_763845942.log raadplegen, het probleem oplossen en de configuratiewizard opnieuw uitvoeren.
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is PostSetupConfigurationFailedUserMessage for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id PostSetupConfigurationFailedUserMessage is De configuratie van SharePoint-producten is mislukt. U moet de configuratie opnieuw uitvoeren
voordat u de SharePoint-producten kunt gebruiken. Zie het diagnostisch logboek op {0} en het gebeurtenislogboek van de toepassing voor meer informatie.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverStop
09/24/2014 19:05:14 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop, De configuratie van SharePoint-producten
is mislukt. U moet de configuratie opnieuw uitvoeren voordat u de SharePoint-producten kunt gebruiken. Zie het diagnostisch logboek op C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_24_2014_19_4_25_376_763845942.log
en het gebeurtenislogboek van de toepassing voor meer informatie.
09/24/2014 19:05:14 1 INF Entering function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Acquiring the writer lock to change the state
09/24/2014 19:05:14 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
09/24/2014 19:05:14 1 INF Changed state of the task driver to neverrun
09/24/2014 19:05:14 1 INF Released the writer lock to change the state
09/24/2014 19:05:14 1 INF Leaving function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message De
configuratie van SharePoint-producten is mislukt. U moet de configuratie opnieuw uitvoeren voordat u de SharePoint-producten kunt gebruiken. Zie het diagnostisch logboek op C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_24_2014_19_4_25_376_763845942.log
en het gebeurtenislogboek van de toepassing voor meer informatie.
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverStop
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.Stop
09/24/2014 19:05:14 1 INF UnLocking the task driver for exclusive use while we ran tasks
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.Run
09/24/2014 19:05:14 1 ERR Post setup configuration was not run successfully when using the command line task driver module
09/24/2014 19:05:14 1 INF Leaving function PsconfigCommandLineMain.Main
No idea what to do? -
Recovery session canceled due to errors. Can't start DB after kernel panic.
Hi all,
I have a cluster Oracle 10 DB that was incorrectly shutdown (node 1 got a kernel panic when I disconnected the cluster interconnect and after a while node 2 also had a panic).
Now the DB doesn't start and I already tried an endless loop of solutions that don't work and lead me right to the start. I was hoping someone could help me fix this bloody thing please. This DB was running in archive log mode.
/export/home/oracle
oracle@dbsce066/1 - TSP/(CLIENT_10.2.0)/SERVER_10.2.0/(CRS_10.2.0)
sqlplus '/ as sysdba'SQL*Plus: Release 10.2.0.3.0 - Production on Mon Jul 18 23:18:24 2011
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 9680453632 bytes
Fixed Size 2162704 bytes
Variable Size 1570701296 bytes
Database Buffers 7969177600 bytes
Redo Buffers 138412032 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> shutdown
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 9680453632 bytes
Fixed Size 2162704 bytes
Variable Size 1553924080 bytes
Database Buffers 7985954816 bytes
Redo Buffers 138412032 bytes
Database mounted.
SQL> recover database using backup controlfile until cancel;
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 87: '/export/home/oracle/dev/DX/dx_index10_logging3'
ORA-01110: data file 86: '/export/home/oracle/dev/DX/dx_index10_logging2'
ORA-00372: file 86 cannot be modified at this time
ORA-01110: data file 86: '/export/home/oracle/dev/DX/dx_index10_logging2'
SQL> select name,status,file# from v$datafile where name like '%index10_logging%';
NAME
STATUS FILE#
/export/home/oracle/dev/DX/dx_index10_logging1
ONLINE 85
/export/home/oracle/dev/DX/dx_index10_logging2
RECOVER 86
/export/home/oracle/dev/DX/dx_index10_logging3
ONLINE 87
SQL> ALTER DATABASE OPEN resetlogs ;
ALTER DATABASE OPEN resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/export/home/oracle/dev/DX/dx_system'
SQL>
I also saw the "_allow_resetlogs_corruption". But I would like to leave this as last resort.
Thanks in advanceThank you everyone for the advices. I used this tutorial to implement the allow reset logs corruption, but still it didn't allow me to startup the DB normally without errors or recover the datafile 86.
@@ How to use "_allow_resetlogs_corruption"
@@ http://dba-oracle.fr/dba/content/view/14/9/
vi /export/home/oracle/products/10.2.0/dbs/initDX1.ora
"/export/home/oracle/products/10.2.0/dbs/initDX1.ora" 94 lines, 4520 characters
DX1.undo_tablespace=dx_undo1
DX1.log_archive_dest_1= 'LOCATION=/export/home/oracle/dev/DX/archivelog1 REOPEN=10'
DX1.local_listener="(address=(protocol=tcp)(HOST=localhost)(PORT=1531))"
### cluster specific parameters
*.cluster_database = true
*.cluster_database_instances = 2
allowresetlogs_corruption=TRUE
"/export/home/oracle/products/10.2.0/dbs/initDX1.ora" 95 lines, 4553 characters
SQL> STARTUP MOUNT
ORACLE instance started.
Total System Global Area 9680453632 bytes
Fixed Size 2162704 bytes
Variable Size 1570701296 bytes
Database Buffers 7969177600 bytes
Redo Buffers 138412032 bytes
Database mounted.
SQL> ALTER DATABASE OPEN RESETLOGS;
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01110: data file 86: '/export/home/oracle/dev/DX/dx_index10_logging2'
ORA-00372: file 86 cannot be modified at this time
ORA-01110: data file 86: '/export/home/oracle/dev/DX/dx_index10_logging2'
SQL> SELECT 'alter database datafile /export/home/oracle/dev/DX/dx_index10_logging2 END BACKUP;' from v$datafile;
'ALTERDATABASEDATAFILE/EXPO
alter database datafile /export/home/oracle/dev/DX/dx_index10_logging2 END BACKUP;
alter database datafile /export/home/oracle/dev/DX/dx_index10_logging2 END BACKUP;
alter database datafile /export/home/oracle/dev/DX/dx_index10_logging2 END BACKUP;
SQL> recover database until cancel using backup controlfile;
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 87: '/export/home/oracle/dev/DX/dx_index10_logging3'
ORA-01110: data file 86: '/export/home/oracle/dev/DX/dx_index10_logging2'
ORA-00372: file 86 cannot be modified at this time
ORA-01110: data file 86: '/export/home/oracle/dev/DX/dx_index10_logging2'
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> shut
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
root@dbsce066> ls -l /export/home/oracle/dev/DX/
total 450
lrwxrwxrwx 1 root other 29 Apr 13 2010 dx_index10_logging1 -> /dev/md/oraindex1dg/rdsk/d651
lrwxrwxrwx 1 root other 29 Apr 13 2010 dx_index10_logging10 -> /dev/md/oraindex1dg/rdsk/d660
lrwxrwxrwx 1 root other 29 Apr 13 2010 dx_index10_logging2 -> /dev/md/oraindex1dg/rdsk/d652
I can access the file and it is readable:
root@dbsce066> ls -ltr /export/home/oracle/dev/DX/dx_index10_logging2
lrwxrwxrwx 1 root other 29 Apr 13 2010 /export/home/oracle/dev/DX/dx_index10_logging2 -> /dev/md/oraindex1dg/rdsk/d652
root@dbsce066> ls -ltr /dev/md/oraindex1dg/rdsk/d652
lrwxrwxrwx 1 root root 44 Aug 2 17:59 /dev/md/oraindex1dg/rdsk/d652 -> ../../../../../devices/pseudo/md@0:3,652,raw
root@dbsce066> dd if=/dev/md/oraindex1dg/rdsk/d652 of=/dev/null
^C18564+0 records in
18564+0 records out
root@dbsce066>
SQL> select * from v$datafile where FILE#=86;
FILE# CREATION_CHANGE# CREATION_TIME TS# RFILE# STATUS
ENABLED CHECKPOINT_CHANGE# CHECKPOINT_TIME UNRECOVERABLE_CHANGE#
UNRECOVERABLE_TIME LAST_CHANGE# LAST_TIME OFFLINE_CHANGE#
ONLINE_CHANGE# ONLINE_TIME BYTES BLOCKS CREATE_BYTES BLOCK_SIZE
NAME
PLUGGED_IN BLOCK1_OFFSET
AUX_NAME
FIRST_NONLOGGED_SCN FIRST_NONLOGGED_TIM
86 184062 2010-04-13:17:18:24 62 86 RECOVER
READ ONLY 498989920 2011-07-18:15:28:29 0
485512497
496226794 2011-07-16:00:01:53 660602880 80640 660602880 8192
/export/home/oracle/dev/DX/dx_index10_logging2
0 8192
NONE
0
select STATUS,ENABLED,NAME from v$datafile where FILE#=86
STATUS ENABLED NAME
RECOVER READ ONLY /export/home/oracle/dev/DX/dx_index10_logging2
SQL> select name from v$tablespace where TS#=62;
NAME
DX_INDEX10_LOGGING2
SQL> alter tablespace DX_INDEX10_LOGGING2 read write;
alter tablespace DX_INDEX10_LOGGING2 read write
ERROR at line 1:
ORA-01109: database not open
SQL> ALTER DATABASE DATAFILE 86 ONLINE;
Database altered.
SQL> select STATUS,ENABLED,NAME from v$datafile where FILE#=86;
STATUS ENABLED
NAME
RECOVER READ ONLY
/export/home/oracle/dev/DX/dx_index10_logging2
SQL>
SQL> alter tablespace DX_INDEX10_LOGGING2 end backup;
alter tablespace DX_INDEX10_LOGGING2 end backup
ERROR at line 1:
ORA-01235: END BACKUP failed for 1 file(s) and succeeded for 0
ORA-01199: file 86 is not in online backup mode
ORA-01110: data file 86: '/export/home/oracle/dev/DX/dx_index10_logging2'
SQL> select log_mode from v$database;
LOG_MODE
ARCHIVELOG
SQL> SELECT FILE#, ERROR, ONLINE_STATUS, CHANGE#, TIME FROM V$RECOVER_FILE;
FILE# ERROR ONLINE_ CHANGE# TIME
86 ONLINE 498989920 2011-07-18:15:28:29
SQL> recover database until cancel using backup controlfile;
ORA-00279: change 497920329 generated at 07/18/2011 12:53:10 needed for thread 2
ORA-00289: suggestion : /export/home/oracle/dev/DX/archivelog1/LOG_DX_8574_2_716223168.ARC
ORA-00280: change 497920329 for thread 2 is in sequence #8574
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00308: cannot open archived log '/export/home/oracle/dev/DX/archivelog1/LOG_DX_8574_2_716223168.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/export/home/oracle/dev/DX/dx_system'
@@ Attempt to start DB without that datafile:
SQL> ALTER DATABASE DATAFILE '/export/home/oracle/dev/DX/dx_index10_logging2' OFFLINE DROP;
Database altered.
SQL> SHUTDOWN IMMEDIATE;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> SQL> startup
ORACLE instance started.
Total System Global Area 9680453632 bytes
Fixed Size 2162704 bytes
Variable Size 1570701296 bytes
Database Buffers 7969177600 bytes
Redo Buffers 138412032 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> ALTER DATABASE OPEN NORESETLOGS;
ALTER DATABASE OPEN NORESETLOGS
ERROR at line 1:
ORA-01588: must use RESETLOGS option for database open
SQL> ALTER DATABASE OPEN RESETLOGS;
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01245: offline file 76 will be lost if RESETLOGS is done
ORA-01110: data file 76: '/export/home/oracle/dev/DX/dx_data10_logging2'
SQL>
@@ Nothing works. I can't even start the DB without that datafile. So I give up of this recovery scenario. Re-install from scratch. -
[SOLVED] Cannot start mysqld after switching to MariaDB
Hey guys,
I just switched to MariaDB as recommended.
After installing MariaDB and running
systemctl start mysqld
, I get this error message:
Job for mysqld.service failed.
journal:
systemd[1]: Starting MariaDB database server...
mysqld[9358]: 130326 0:27:17 InnoDB: The InnoDB memory heap is disabled
mysqld[9358]: 130326 0:27:17 InnoDB: Mutexes and rw_locks use GCC atomic builtins
mysqld[9358]: 130326 0:27:17 InnoDB: Compressed tables use zlib 1.2.7
mysqld[9358]: 130326 0:27:17 InnoDB: Initializing buffer pool, size = 128.0M
mysqld[9358]: 130326 0:27:17 InnoDB: Completed initialization of buffer pool
mysqld[9358]: 130326 0:27:17 InnoDB: highest supported file format is Barracuda.
mysqld[9358]: 130326 0:27:17 InnoDB: Waiting for the background threads to start
mysqld[9358]: 130326 0:27:18 Percona XtraDB (http://www.percona.com) 5.5.30-MariaDB-30.1 started; log sequence number 46580545
mysqld[9358]: 130326 0:27:18 [ERROR] mysqld: Got error 'Size of control file is smaller than expected' when trying to use aria control file '/var/lib/mysql/aria_log_control'
mysqld[9358]: 130326 0:27:18 [ERROR] Plugin 'Aria' init function returned error.
mysqld[9358]: 130326 0:27:18 [ERROR] Plugin 'Aria' registration as a STORAGE ENGINE failed.
mysqld[9358]: 130326 0:27:18 [ERROR] Aria engine is not enabled or did not start. The Aria engine must be enabled to continue as mysqld was configured with --with-aria-tmp-tables
mysqld[9358]: 130326 0:27:18 [ERROR] Aborting
mysqld[9358]: 130326 0:27:18 InnoDB: Starting shutdown...
mysqld[9358]: 130326 0:27:19 InnoDB: Shutdown completed; log sequence number 46580545
mysqld[9358]: 130326 0:27:19 [Note] /usr/bin/mysqld: Shutdown complete
systemd[1]: mysqld.service: main process exited, code=exited, status=1/FAILURE
Last edited by lonaowna (2013-03-26 01:23:20)Hi ! I come here because I have a trouble since the last update of Mysqld :
I cannot start the daemon with
sudo systemctl start mysqld
I have these problems when i look in journalctl -xn :
mars 26 00:22:14 server mysqld[11593]: InnoDB: Error: log file ./ib_logfile0 is of different size 0 3174400 bytes
mars 26 00:22:14 server mysqld[11593]: InnoDB: than specified in the .cnf file 0 5242880 bytes!
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Plugin 'InnoDB' init function returned error.
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Unknown/unsupported storage engine: InnoDB
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Aborting
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [Note] /usr/bin/mysqld: Shutdown complete
mars 26 00:22:14 server systemd[1]: mysqld.service: main process exited, code=exited, status=1/FAILURE
When I try with mysqld, I have
130326 0:23:21 [Warning] Can't create test file /var/lib/mysql/server.lower-test
130326 0:23:21 [Warning] Can't create test file /var/lib/mysql/server.lower-test
mysqld: Can't change dir to '/var/lib/mysql/' (Errcode: 13)
130326 0:23:21 [ERROR] Aborting
130326 0:23:21 [Note] mysqld: Shutdown complete
And when I look in /var/lib/mysql/server.err I have these lines
130207 23:32:56 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
130322 00:25:27 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
130322 0:25:27 InnoDB: The InnoDB memory heap is disabled
130322 0:25:27 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130322 0:25:27 InnoDB: Compressed tables use zlib 1.2.7
130322 0:25:27 InnoDB: Initializing buffer pool, size = 128.0M
130322 0:25:27 InnoDB: Completed initialization of buffer pool
130322 0:25:27 InnoDB: highest supported file format is Barracuda.
InnoDB: Error: tried to read 65536 bytes at offset 0 3173376.
InnoDB: Was only able to read 1024.
InnoDB: Fatal error: cannot read from file. OS error number 17.
130322 0:25:30 InnoDB: Assertion failure in thread 139785666135872 in file os0file.c line 2538
InnoDB: We intentionally generate a memory trap.
InnoDB: Submit a detailed bug report to http://bugs.mysql.com.
InnoDB: If you get repeated assertion failures or crashes, even
InnoDB: immediately after the mysqld startup, there may be
InnoDB: corruption in the InnoDB tablespace. Please refer to
InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html
InnoDB: about forcing recovery.
23:25:30 UTC - mysqld got signal 6 ;
This could be because you hit a bug. It is also possible that this binary
or one of the libraries it was linked against is corrupt, improperly built,
or misconfigured. This error can also be caused by malfunctioning hardware.
We will try our best to scrape up some info that will hopefully help
diagnose the problem, but since we have already crashed,
something is definitely wrong and this may fail.
key_buffer_size=16777216
read_buffer_size=262144
max_used_connections=0
max_threads=151
thread_count=0
connection_count=0
It is possible that mysqld could use up to
key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 134074 K bytes of memory
Hope that's ok; if not, decrease some variables in the equation.
Thread pointer: 0x0
Attempting backtrace. You can use the following information to find out
where mysqld died. If you see no messages after this, something went
terribly wrong...
stack_bottom = 0 thread_stack 0x40000
/usr/bin/mysqld(my_print_stacktrace+0x29)[0x78ae99]
/usr/bin/mysqld(handle_fatal_signal+0x471)[0x67ad71]
/usr/lib/libpthread.so.0(+0xf1e0)[0x7f226299a1e0]
/usr/lib/libc.so.6(gsignal+0x35)[0x7f22615612c5]
/usr/lib/libc.so.6(abort+0x148)[0x7f2261562748]
/usr/bin/mysqld[0x8f2ac0]
/usr/bin/mysqld[0x8af1a0]
/usr/bin/mysqld[0x8e187c]
/usr/bin/mysqld[0x8e75ef]
/usr/bin/mysqld[0x834204]
/usr/bin/mysqld[0x7fe61f]
/usr/bin/mysqld(_Z24ha_initialize_handlertonP13st_plugin_int+0x41)[0x67ccf1]
/usr/bin/mysqld[0x59ad94]
/usr/bin/mysqld(_Z11plugin_initPiPPci+0xa42)[0x59f342]
/usr/bin/mysqld[0x524328]
/usr/bin/mysqld(_Z11mysqld_mainiPPc+0x447)[0x529187]
/usr/lib/libc.so.6(__libc_start_main+0xf5)[0x7f226154da15]
/usr/bin/mysqld[0x51ff89]
The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains
information that should help you find out what is causing the crash.
130322 00:25:30 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
130326 00:24:58 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
130326 0:24:58 InnoDB: The InnoDB memory heap is disabled
130326 0:24:58 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130326 0:24:58 InnoDB: Compressed tables use zlib 1.2.7
130326 0:24:58 InnoDB: Initializing buffer pool, size = 128.0M
130326 0:24:58 InnoDB: Completed initialization of buffer pool
InnoDB: Error: log file ./ib_logfile0 is of different size 0 3174400 bytes
InnoDB: than specified in the .cnf file 0 5242880 bytes!
130326 0:24:58 [ERROR] Plugin 'InnoDB' init function returned error.
130326 0:24:58 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
130326 0:24:58 [ERROR] Unknown/unsupported storage engine: InnoDB
130326 0:24:58 [ERROR] Aborting
130326 0:24:58 [Note] /usr/bin/mysqld: Shutdown complete
130326 00:24:58 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
130326 00:25:33 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql/
130326 0:25:33 InnoDB: The InnoDB memory heap is disabled
130326 0:25:33 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130326 0:25:33 InnoDB: Compressed tables use zlib 1.2.7
130326 0:25:33 InnoDB: Initializing buffer pool, size = 128.0M
130326 0:25:33 InnoDB: Completed initialization of buffer pool
InnoDB: Error: log file ./ib_logfile0 is of different size 0 3174400 bytes
InnoDB: than specified in the .cnf file 0 5242880 bytes!
130326 0:25:33 [ERROR] Plugin 'InnoDB' init function returned error.
130326 0:25:33 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
130326 0:25:33 [ERROR] Unknown/unsupported storage engine: InnoDB
130326 0:25:33 [ERROR] Aborting
130326 0:25:33 [Note] /usr/bin/mysqld: Shutdown complete
130326 00:25:33 mysqld_safe mysqld from pid file /var/lib/mysql//server.pid ended
When I try mysqld_safe, here is what I get
130326 00:24:58 mysqld_safe Logging to '/var/lib/mysql/server.err'.
130326 00:24:58 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
130326 00:24:58 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
Resolution
===== It's a good thing to make a post :
It allows me to order my ideas and I find the solution here http://serverfault.com/questions/104014 … erent-size
I juste deleted the files /var/lib/mysqld/ib_logfile0 and /var/lib/mysql/ib_logfile1
First, I had a problem about the file who is in the future (WTF ?:p) But after, it worked !
Thanks Anyway !
Last edited by shox (2013-03-25 23:51:43)
Maybe you are looking for
-
Why does Bridge open raw files (ndg) in Raw window even though the 'Open in Photoshop' option is...
I don't understand why in Bridge there are 2 choices, -1- Open raw and -2- Open in Photoshop and yet both choices give you the same result--The raw window opens with PS below it. After having worked on my raw NEF files I save it to dng. My thinking
-
Not able to install photoshop elements 11 on MacBook Pro OS 10.7.4
spent last two days downloading photoshop elements 11 onto MacBook Pro OS 10.7.4 multiple times with no luck opening and installing popup reads: no default application specified to open the document PhotoshopElements _11_LS15-2.7z other download read
-
I said to heck with it and did away with my Samsung Fascinate. I found out alot of the issues and problems I was having with the phone was in the phone itself. For example, I was having issues with charging the phone in my car with the car charger.
-
Sync ipod classic with itune library
Why won't my ipod classic sync with my entire library on my MacBook Pro?
-
How do you take a blemish off someone's face in PSE 7?
How do you take a blemish off someone's face in PSE 7? Is there a video tutorial out there for this or is there an easy explanation? I appreciate anyone's help on this. Thank you!