Error in entering a new characteristic value using input ready row in WAD

Hi Guys,
I have created input ready query with input ready row option to enter both characteristic and key figure values. I have created info object without master data tick in Master data/text tab to enter free text which inturn will create a new record in master data. It is working in Bex analyzer, here I can enter any value to create a new entry in the master data but where as in WAD I am getting error message reading invalid values. In WAD I am restricted to choose only available master data entries. Do I miss any settings in WAD. Your help will be highly appreciated.

Hi,
the feature you are requesting is called "Master Data Planning". Unfortunately it is not supported by SAP. Please use the term "master data planning " to search this forum and you will find some threads about this issue.
Hope this helps
Matthias Nutt
SAP Consulting Switzerland

Similar Messages

Error:-Please enter a company name to use within the iTunes Store

Hi ,
I have registered for iOS developer program (99$) one .
Now I am trying to block the app name which i will upload soon . When i go to itunes connect and create a new app and provide all the information needed, I get the error "Please enter a company name to use within the iTunes Store."
Can someone help me out on this ?

I have the same error, but I think we will get no solution for this problem.
You've get no answer here and the Apple support also doesn't send an answer how to solve the problem.
BTW I have also Windows 7 and the newest version of iTunes 64-bit.
Greetings Mike

Input-Ready row with characteristic in column

Hi,
I have several workbooks based on queries with the property of having an Input-Ready row (context of integrated planning).
These always worked fine, but after a bex upgrade only some of the queries continued to display the input-ready row at the bottom.
A reason why only sometimes it works, has been asked to SAP.
SAP refers to:
http://help.sap.com/saphelp_nw70/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm
which says:
You cannot use characteristics in the columns and can use one structure only.
My queries mostly contain 0fiscper and 0amount in the columns.
Following the above logic, the input-ready row never should appear since I display the amount over 12 months (=characteristic in column).
BEx:
Bi AddOn 7.X (based on 7.10)
Support Package 8, Patch 1
additional info:
- All queries were designed in 7.x.
- Same result in BEx Analyzer without using Workbook.
Question:
- What could be the reason that in some cases the input-ready row still appears, and in others not?
- Any suggestions for workaround?
Thx in advance!
Rgds, Sam

I beleive if you post it in "Business planing" queue you will get good response...
Business Planning

Is it possible to display default values in input ready query.

Hi Guys,
Is it possible to display default values in input ready query.

HI,
Select the particular Variable.....in the right hand side u will find the default values tab....in that u can give the values...and save...if u run the query then it will show the default values for that Variable.selection....
Thanks/Tarak

Error in Release strategy : Inconsistent Characteristic Value assignment

Hello Gurus ,
Good Day ...
Need your help in release strategy in purchase order .
Thanks in advance .......
Characteristics characteristics value
R2R_PURCH_ORD_TYPE NB
R2R_PURCH_GRP1 001
R2R_PURCH_ORD_VALUE 0,00 - 1000,00 USD
1001,00 - 2000,00 USD
2001,00 - 10000,00 USD
Class assigned char
Z_CLASS R2R_PURCH_ORD_TYPE
R2R_PURCH_GRP1
R2R_PURCH_ORD_VALUE
Rel grp assigned class
PH Z_CLASS
rel grp rel codes
PH 1 -director/VP
PH 2 - manager
PH 3 - buyer
rel grp rel strategy
PH A1
PH A2
PH A3
Now in SPRO -
> define Release Procedures for Purchase ORder -
> Release Strategies
PH A1 Release Strategy 1 (rel. prereq , rel statuses, classification , rel simulation ) working fine
PH A2 Release Strategy 2 (rel. prereq , rel statuses, classification , rel simulation )
ERROR MSG: INCONSISTENT CHARACTERISTIC VALUE ASSIGNMENT
DETAILS :
You want to change the value assigned to a characteristic. However, the change causes inconsistency, so the new value is not allowed.
The inconsistency may be for the following reasons:
A precondition or selection condition is violated.
The characteristic is a single-value characteristic, and different values have been set by constraints, actions, or procedures.
In classification, inconsistencies occur when you change the value set of a characteristic if objects or classes have already been classified with values from the previous value set.
Procedure
Choose Inconsistencies to see what triggered the inconsistency. You can also use the explanation facility for more information.
Delete the values that triggered the inconsistency.
You can only change or delete a value or value set that has already been used to classify objects if you delete the existing allocations.
PH A3 Release Strategy 3 -
> SAME AS ABOVE
regards,
ajay

Hi,
Inconsistency due to different "VALUE" in the Release Strategy & "VALUE" present in the Release Characteristics . Check details with value assignment with designed Strategies.
Also keep following VALUE Release Characteristics for value
<=1000,00.00 USD
1000,00.01 USD- 2000,00 .00USD
2000,00 .01- 10000,00.00 USD
instead of (0,00 - 1000,00 USD,1001,00 - 2000,00 USD,2001,00 - 10000,00 USD )
Regards,
Biju K

Error at sales order: Inconsistent characteristic value assignment

Hi SAPians
There is a problem in variant configuration. I have configurable materials at sales order level with BOMs and super BOMs. When I am executing the scenario, not able to process further after selecting characteristic values for a configurable material. The error saying " Inconsistent characteristic value assignment". I checked all the relevant master data, every thing is okay. But I am not able to proceed further. Can any one provide some valuable inputs for this.
Raksha.

Hi
Did u create variant table (CU61) if not plz and try to make it by tick mark of Decision table..
u can check assignmebt consitance thru CU60 ..if there again blank plz maintain it manually..
basically wt happened during creation of Characteristics and assignment of value in value tab .. there is indicator ..which influence assignment consistance..
hope u may get clue.
correct me if i went wrong..
thanks
mk

Error in Partials for new dimension values

Hello everyone,
I was trying out partial update for the first time on our index. ADDS, UPDATES, DELETES everything works out fine. The only error we are seeing is when an ADD or UPDATE has a new dimension value in it, the following error shows up:
*DGRAPH {dgraph,update} Record change references unknown dimension value id 4294428511 [recspec=`P_RECORD_SPEC:GS1001B101508E']*
This is what I observe:
~ data/state/autogen_dimensions.xml has the entries for this dimension after partial forge is completed
~ the forge output files SomeName--sgmt0.records.xml has the entries for this dimension
My thinking is the new dimensions collected in autogen-dimensions.xml during the partial are not available to the dgraph when the update is run. Am I missing any steps? Can you please point me the right direction. Please let me know if you need additional information on my setup.
[Product: Endeca Information Access Platform version 6.1.4.530518 (analytics enabled)]
Regards.
Pankaj.

Can you share your XML record manipulator where you tag each record with the update action? This would be a place where you would see:
<EXPRNODE NAME="ACTION" VALUE="ADD_OR_REPLACE"/>
The missing piece might be: <EXPRNODE NAME="DIM_ACTION" VALUE="ADD"/>
The latest documentation has a good, dedicated partial update guide.
[MDEX 6.3.0 Partial Update Guide|http://docs.oracle.com/cd/E35825_01/MDEX.630/pdf/PartialUpdatesGuide.pdf]

Update item characteristic values using BAPI_SALESORDER_CHANGE

Hi Experts,
Could anyone give me sample code on how to update the characteristic values of a sales order item? Points will be awarded... Thanks!
Regards,
LM

Just checked on OSS note 549563 regarding this. This is resolved. Thanks

Problem when Entering Decimal Values at Input Ready Query

Hi Everyone,
I have created Input ready query but when I am going to enter decimal values in input cell it takes as a round of value.
Example:- If I enter 1.234 value at input cell it takes as a 1 or if I enter 1.789 value then it takes as a 2 at cell.
The technical properties of Key Figure at Info object level is,
Radio Button :- Decimal
Drop Down :- FLTP (Floating Point)
But we want to whatever value will enter at input cell, the same value will save at real time info cube level.
Requirement :- If I enter 1.234 value at input cell it needs to take as a 1.234
Please suggest your comments/views.
Thanks
Kind Regards
Anukul

Hi Giradkar,
Check the setting of the UOM you are using in table 'T006' there are 2 fields that indicate how to display and how to store the values with respective UOM.
Regards,
Eitan.

How to allow users to record new lines in an input ready query?

Dear All,
I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
Is it possible to create an input ready qurey in such a way?
Thanks in Advance,
Dezso

Hi Dezso,
Yes,
If you want the query to work like a "from transaction data" layout. Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values" Then only lines with posted values will appear.
M.

Convert to Formula using input ready queries

Hi,
Has anyone used converting to formula for input ready queries? When I use this for some reason all the values disappear in the rows and columns (including characteristic and key figure values). I would be interested to know if anyone has used this approach successfully.
Many thanks,

Also I want to convert this update routine 3.5 to work in 7
fill the internal table "MONITOR", to make monitor entries
IF COMM_STRUCTURE-costelmnt+2(1) = '7'.
    IF COMM_STRUCTURE-costelmnt+2(3) BETWEEN '700' AND '774'.
      RESULT = '70'.
    ELSEIF COMM_STRUCTURE-costelmnt+2(3) BETWEEN '775' AND '789'.
      RESULT = '75'.
    ELSEIF COMM_STRUCTURE-costelmnt+2(3) BETWEEN '790' AND '799'.
      RESULT = '79'.
    ENDIF.
ELSE.
    CASE COMM_STRUCTURE-costelmnt+2(1).
      WHEN '1'.
        RESULT = '10'.
      WHEN '2'.
        RESULT = '20'.
      WHEN '3'.
        RESULT = '30'.
      WHEN '4'.
        RESULT = '40'.
      WHEN '5'.
        RESULT = '50'.
      WHEN '6'.
        RESULT = '60'.
      WHEN '8'.
        RESULT = '80'.
      WHEN OTHERS.
        RESULT = '00'.
    ENDCASE.
ENDIF.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
The source is KSTAR(costelement)

How to get Input-Ready Cell Value of Input Ready Query?

Hi,
How to get input ready cell value in fox formula?
for example :
In Input-Ready Query,
C_Code Month Psale(input ready)
1000 05.2012 800
now i want Psale 800 in fox formua before value save in cube,
is it possible?
Thanks
Ravi

Hi,
as I understand your requirement: you want to execute a planning function before 'save'. This possible, cf. note 1356805
for more details.
Regards,
Gregor

Error while creating a new DAC connection using connection type MSSQL

Hi,
I am trying to create a new DAC connection i.e. a new DAC repository in the SQL Server 2008 database.
DAC version : 10.1.3.4.1
Database : SQL Server 2008
I have downloaded the sqljdbc4.jar file from the below link and placed it in the D:\orahome\10gR3_1\bifoundation\dac\lib folder.
[http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=11774 ]
I have entered all the details correctly for database name, database host, database port. I created a new Authentication file.
I get the below error when I try to test the connection.
MESSAGE:::MSSQL driver not available!
EXCEPTION CLASS::: java.lang.IllegalArgumentException
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:512)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::com.microsoft.sqlserver.jdbc.SQLServerDriver
EXCEPTION CLASS::: java.lang.ClassNotFoundException
java.net.URLClassLoader$1.run(URLClassLoader.java:200)
java.security.AccessController.doPrivileged(Native Method)
java.net.URLClassLoader.findClass(URLClassLoader.java:188)
java.lang.ClassLoader.loadClass(ClassLoader.java:306)
sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
java.lang.ClassLoader.loadClass(ClassLoader.java:251)
java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
java.lang.Class.forName0(Native Method)
java.lang.Class.forName(Class.java:169)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:510)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
The error seems to be a connectivity issue with SQL Server. Am I using the correct jar file?
Please help me out in resolving this issue. Appreciate the help provided on this forum earlier.
Thank You

Add
.\lib\sqljdbc4.jar
at end of the line starting with SQLSERVERLIB in config.bat file
Pls mark correct

Error in entering header level conditional value - toomany line items to PO

Hi experts
I have an issue while processing a PO. While entering condition values like Freight, Customs duty etc in header level where the order contains more than 1000 line items, i am getting an error " too many line items, msg no.899". Can somebody, guide on this how this can be resolved.
rgds
Raghu

HI Raghu,
The only possible way is to create two diffrent PO's.
As you have maintain various conditions, this will lead to updation of many FI documents at the time of GRN.
This is SAP Limitation.
Regards,
Amit
njoy SAP..
njou Life....

Error Message on ITunes (New PC is using Vista... Yuck)

Has anyone seen this message using iTunes 7.1.1.5 on a Windows Vista machine?
"The iTunes library cannot be saved. You do not have enough access privilegesfor this operation".
I am logged in as administrator and just installed the latest iTunes download on a new Vista based laptop.
Any ideas please?
Thanks, Eddie

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Error in entering a new characteristic value using input ready row in WAD

Similar Messages

Maybe you are looking for