Error in Entourage (-17099 - Transaction Failed)

Hi,
Not sure if this is the right forum....apologies f it is not.
I am currently unable to send emails through
Entourage:mac. Each time I get the Transaction Failed Error -17099 message.
Receiving mail is fine.....
My ISP is AOL...
Sending/Receiving through AOL and Mail is fine - it's just Entourage that is the problem.
I'm trying to send mails to previous recipients in my Address Book and I'm not sending to large numbers of users - even 1 recipient fails.
I've done a Google search on this and there have been numerous questions raised in the past, but no resolution seems to be obvious.
Can anyone help please?
Cheers,
Paul

Question not answered...but problem resolved itself

Similar Messages

  • Deferred transaction fails due to a "ORA-01403: no data found" error

    I recently acticated replication between two Oracle instances.
    (one being the master definition site and the other one being
    a second master site).
    Everything was going well until two weeks ago, when i realized
    that some datas were different between the two Oracle instances.
    I tried to figure out why and found that some deferred transation
    failed to propagate due to a "ORA-01403: no data found" error.
    Not all transaction fail, only a few.
    All the errors are stored in the DEFERROR table of the second
    master site, the DEFERROR table is empty in the master definition
    site.
    For every error, the source is the master definition site and the
    destination is the second master site, which is OK because the
    second master site is supposed to be "read-only". But why are the
    errors stored in the DEFERROR table of the second master site
    (and not in the master definition site (the source)).
    Most errors occur on UPDATE statements but a few of them occur
    on DELETE statements. Given the fact that the record actually is
    in the second master site, how is it possible to get a
    "ORA-01403: no data found" error on a delete statement ???????
    I can't figure out what data cannot be found,
    Thanks for your help,
    Didier.

    What if i tell you the first transaction in error is an UPDATE
    statement on a record that actually is in the destination table
    in the second master site. So the data is there, it should be
    found ...
    I've tried an EXECUTE_ERROR on that very first transaction
    in error but it doesn't work. Here's the call (as repadmin) :
    begin
    DBMS_DEFER_SYS.EXECUTE_ERROR (
    DEFERRED_TRAN_ID => '6.42.271',
    DESTINATION => 'AMELIPI.SENAT.FR'
    end ;
    And here's the full message :
    ORA-01403: no data found
    ORA-06512: at "SYS.DBMS_DEFER_SYS_PART1" line 430
    ORA-06512: at "SYS.DBMS_DEFER_SYS" line 1632
    ORA-06512: at "SYS.DBMS_DEFER_SYS" line 1678
    ORA-06512: at line 2
    I thought it could be because the primary key constraint on the
    destination table wasn't activated but it was. Could it
    be a problem with the corresponding index ?
    Thanks for your help,
    Didier.

  • [SEND_REPLY(9)] [C4036]: A server error occurred. : transaction failed:

    Anyone know why I'm getting this error? On the client side I'm getting the following exception:
    [SEND_REPLY(9)] [C4036]: A server error occurred. : transaction failed: Unexpected Broker
    Exception: [received message with Unknown Transaction ID -1: ignoring message] user=guest, broker=localhost:7676(3243)
    at com.sun.messaging.jmq.jmsclient.ProtocolHandler.throwServerErrorException(ProtocolHandler.java:3059)
    at com.sun.messaging.jmq.jmsclient.ProtocolHandler.writeJMSMessage(ProtocolHandler.java:1555)
    at com.sun.messaging.jmq.jmsclient.WriteChannel.sendWithFlowControl(WriteChannel.java:123)
    at com.sun.messaging.jmq.jmsclient.WriteChannel.writeJMSMessage(WriteChannel.java:76)
    at com.sun.messaging.jmq.jmsclient.Transaction.send(Transaction.java:128)
    at com.sun.messaging.jmq.jmsclient.SessionImpl.writeJMSMessage(SessionImpl.java:683)
    at com.sun.messaging.jmq.jmsclient.MessageProducerImpl.writeJMSMessage(MessageProducerImpl.java:155)
    at com.sun.messaging.jmq.jmsclient.MessageProducerImpl.writeJMSMessage(MessageProducerImpl.java:145)
    at com.sun.messaging.jmq.jmsclient.MessageProducerImpl.send(MessageProducerImpl.java:499)
    In the broker log, I'm getting this:
    [03/Nov/2005:11:13:24 PST] WARNING [B3100]: Unexpected Broker Internal Error : [transaction failed] :
    com.sun.messaging.jmq.jmsserver.util.BrokerException: Unexpected Broker Exception: [received message with Unknown Transaction ID -1: ignoring message]
         at com.sun.messaging.jmq.jmsserver.data.TransactionList.addMessage(TransactionList.java:216)
         at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.handle(DataHandler.java:141)
         at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.handle(DataHandler.java:59)
         at com.sun.messaging.jmq.jmsserver.data.PacketRouter.handleMessage(PacketRouter.java:146)
         at com.sun.messaging.jmq.jmsserver.service.imq.IMQConnection.readData(IMQConnection.java:1847)
         at com.sun.messaging.jmq.jmsserver.service.imq.IMQConnection.process(IMQConnection.java:816)
         at com.sun.messaging.jmq.jmsserver.service.imq.OperationRunnable.process(OperationRunnable.java:141)
         at com.sun.messaging.jmq.jmsserver.util.pool.BasicRunnable.run(BasicRunnable.java:459)
         at java.lang.Thread.run(Thread.java:595)
    [03/Nov/2005:11:13:24 PST] ERROR [B3100]: Unexpected Broker Internal Error : [Unknown transaction: -1(-1) broker will  not notify the client Ignoring ROLLBACK_TRANSACTION(48)
          Packet: ROLLBACK_TRANSACTION(48):117-192.168.0.2(e7:cb:48:e:43:5d)-4127-1131045204302
      Magic/Version: 469754818/301     Size: 112      Type: ROLLBACK_TRANSACTION(48)
         Expiration: 0                 Timestamp: 1131045204302
          Source IP: 192.168.0.2(e7:cb:48:e:43:5d)  Port: 4127     Sequence: 117
    Property Offset: 76               Property Size: 36
         Encryption: 0     Priority: 5
              Flags:                   consumerID: 0
         TransactionID: 0
           MessageID: 117-192.168.0.2(e7:cb:48:e:43:5d)-4127-1131045204302
         Properties: {JMQTransactionID=-1}
    Message Body: 0 bytes
    Internal Buffers (useDirect=false):
    Fixed Header Buffer:java.nio.HeapByteBuffer[pos=0 lim=72 cap=72]
    ]

    Please provide more information,
    . what is the version of MQ you are using ?
    (see top of the broker log)
    . are you using MQ cluster ?
    . describe your application
    amy

  • Unexpected Broker Internal Error : [transaction failed]:

    Currently running glassfish v2.1 with jms broker mode set as LOCAL and remote client message listeners fail to get messages and the following is logged by imqbroker:
    [23/Jun/2009:21:45:38 BST] WARNING [B3100]: Unexpected Broker Internal Error : [transaction failed]:
    com.sun.messaging.jmq.jmsserver.util.BrokerException: Unexpected Broker Exception: [received message with Unknown Transaction ID -1: ignoring message]
    at com.sun.messaging.jmq.jmsserver.data.TransactionList.addMessage(TransactionList.java:587)
    at com.sun.messaging.jmq.jmsserver.data.TransactionList.addMessage(TransactionList.java:571)
    at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.routeMessage(DataHandler.java:448)
    at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.handle(DataHandler.java:244)
    at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.handle(DataHandler.java:97)
    at com.sun.messaging.jmq.jmsserver.data.PacketRouter.handleMessage(PacketRouter.java:181)
    at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.readData(IMQIPConnection.java:1489)
    at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.process(IMQIPConnection.java:644)
    at com.sun.messaging.jmq.jmsserver.service.imq.OperationRunnable.process(OperationRunnable.java:170)
    at com.sun.messaging.jmq.jmsserver.util.pool.BasicRunnable.run(BasicRunnable.java:493)
    at java.lang.Thread.run(Thread.java:595)
    [23/Jun/2009:21:45:38 BST] WARNING [B2011]: Storing of JMS message from IMQConn[AUTHENTICATED,[email protected]:46541,jms:39771] failed:
    com.sun.messaging.jmq.jmsserver.util.BrokerException: transaction failed: Unexpected Broker Exception: [received message with Unknown Transaction ID -1: ignoring message]
    [23/Jun/2009:21:45:38 BST] WARNING [B2189]: Unknown transaction -1(-1), broker will not notify the client. Ignore ROLLBACK_TRANSACTION(48)
    Packet: ROLLBACK_TRANSACTION(48):587-10.201.1.142(99:9a:41:23:bb:b7)-46541-1245789938570
    Magic/Version: 469754818/301 Size: 112 Type: ROLLBACK_TRANSACTION(48)
    Expiration: 0 Timestamp: 1245789938570
    Source IP: 10.201.1.142(99:9a:41:23:bb:b7) Port: 46541 Sequence: 587
    Property Offset: 76 Property Size: 36
    Encryption: 0 Priority: 5
    Flags: consumerID: 0
    TransactionID: 0
    MessageID: 587-10.201.1.142(99:9a:41:23:bb:b7)-46541-1245789938570
    Properties: {JMQTransactionID=-1}
    Message Body: 0 bytes
    Internal Buffers (useDirect=false):
    Fixed Header Buffer:java.nio.HeapByteBuffer[pos=0 lim=72 cap=72]
    Any ideas? Clustering is turned off.

    message broker log
    # 1245801254899 Do not modify this line
    [24/Jun/2009:00:54:14 BST]
    ================================================================================
    Open Message Queue 4.3
    Sun Microsystems, Inc.
    Version: 4.3 (Build 7-g)
    Compile: Fri Nov 7 18:14:54 PST 2008
    Copyright (c) 2007 Sun Microsystems, Inc. All rights reserved. Use is
    subject to license terms.
    ================================================================================
    Java Runtime: 1.5.0_12 Sun Microsystems Inc. /usr/lib/jdk1.5.0_12/jre
    [24/Jun/2009:00:54:14 BST] IMQ_HOME=/opt/our-server/glassfish/imq
    [24/Jun/2009:00:54:14 BST] IMQ_VARHOME=/opt/our-server/glassfish/domains/domain1/imq
    [24/Jun/2009:00:54:14 BST] Linux 2.6.16 i386 medusa.eng.dolby.net (4 cpu) root
    [24/Jun/2009:00:54:14 BST] Java Heap Size: max=193920k, current=193920k
    [24/Jun/2009:00:54:14 BST] Arguments: -javahome /usr/lib/jdk1.5.0_12/jre/.. -Dimq.cluster.nowaitForMasterBroker=true -varhome /opt/our-server/glassfish/domains/domain1/imq -startRmiRegistry -rmiRegistryPort 7776 -Dimq.imqcmd.user=admin -passfile /tmp/asmq23784.tmp -save -name imqbroker -port 7676 -bgnd -silent
    [24/Jun/2009:00:58:35 BST] [B1065]: Accepting: [email protected]:51368->jms:35424. Count: service=12 broker=13
    [24/Jun/2009:00:59:06 BST] WARNING [B3100]: Unexpected Broker Internal Error : [transaction failed]:
    com.sun.messaging.jmq.jmsserver.util.BrokerException: Unexpected Broker Exception: [received message with Unknown Transaction ID -1: ignoring message]
         at com.sun.messaging.jmq.jmsserver.data.TransactionList.addMessage(TransactionList.java:587)
         at com.sun.messaging.jmq.jmsserver.data.TransactionList.addMessage(TransactionList.java:571)
         at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.routeMessage(DataHandler.java:448)
         at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.handle(DataHandler.java:244)
         at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.handle(DataHandler.java:97)
         at com.sun.messaging.jmq.jmsserver.data.PacketRouter.handleMessage(PacketRouter.java:181)
         at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.readData(IMQIPConnection.java:1489)
         at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.process(IMQIPConnection.java:644)
         at com.sun.messaging.jmq.jmsserver.service.imq.OperationRunnable.process(OperationRunnable.java:170)
         at com.sun.messaging.jmq.jmsserver.util.pool.BasicRunnable.run(BasicRunnable.java:493)
         at java.lang.Thread.run(Thread.java:595)
    [24/Jun/2009:00:59:06 BST] WARNING [B2011]: Storing of JMS message from IMQConn[AUTHENTICATED,[email protected]:54965,jms:35424] failed:
    com.sun.messaging.jmq.jmsserver.util.BrokerException: transaction failed: Unexpected Broker Exception: [received message with Unknown Transaction ID -1: ignoring message]
    [24/Jun/2009:00:59:06 BST] WARNING [B2189]: Unknown transaction -1(-1), broker will not notify the client. Ignore ROLLBACK_TRANSACTION(48)
         Packet: ROLLBACK_TRANSACTION(48):113-10.201.1.142(b3:b1:70:67:8e:45)-54965-1245801546716
    Magic/Version: 469754818/301     Size: 112     Type: ROLLBACK_TRANSACTION(48)
    Expiration: 0          Timestamp: 1245801546716
    Source IP: 10.201.1.142(b3:b1:70:67:8e:45) Port: 54965     Sequence: 113
    Property Offset: 76               Property Size: 36
    Encryption: 0     Priority: 5
    Flags:                consumerID: 0
    TransactionID: 0
    MessageID: 113-10.201.1.142(b3:b1:70:67:8e:45)-54965-1245801546716
    Properties: {JMQTransactionID=-1}
    Message Body: 0 bytes
    Internal Buffers (useDirect=false):
    Fixed Header Buffer:java.nio.HeapByteBuffer[pos=0 lim=72 cap=72]
    [24/Jun/2009:01:09:52 BST] [B1066]: Closing: [email protected]:3031->jms:35424 because "java.net.SocketException: Connection reset". Count: service=0 broker=11
    [24/Jun/2009:01:09:52 BST] [B1066]: Closing: [email protected]:3033->jms:35424 because "java.net.SocketException: Connection reset". Count: service=0 broker=10
    [24/Jun/2009:01:09:54 BST] [B1066]: Closing: [email protected]:2930->jms:35424 because "java.net.SocketException: Connection reset". Count: service=0 broker=9
    [24/Jun/2009:01:11:52 BST] [B1130]: Destroying auto-created destination workorderStatusTopic [Topic] inactive for 120 seconds
    [24/Jun/2009:01:11:52 BST] [B1159]: Destination workorderStatusTopic [Topic] has been destroyed
    [24/Jun/2009:01:11:52 BST] [B1130]: Destroying auto-created destination wfProfileStatusTopic [Topic] inactive for 120 seconds
    [24/Jun/2009:01:11:52 BST] [B1159]: Destination wfProfileStatusTopic [Topic] has been destroyed
    [24/Jun/2009:01:11:52 BST] [B1130]: Destroying auto-created destination sysMonitorTopic [Topic] inactive for 120 seconds
    [24/Jun/2009:01:11:52 BST] [B1159]: Destination sysMonitorTopic [Topic] has been destroyed
    [24/Jun/2009:01:11:52 BST] [B1130]: Destroying auto-created destination reportStatusTopic [Topic] inactive for 120 seconds
    [24/Jun/2009:01:11:52 BST] [B1159]: Destination reportStatusTopic [Topic] has been destroyed
    [24/Jun/2009:01:14:22 BST] [B1066]: Closing: [email protected]:37062->jms:35424 because "[B0059]: Client closed the connection". Count: service=0 broker=8
    [24/Jun/2009:01:14:22 BST] [B1066]: Closing: [email protected]:55527->jms:35424 because "[B0059]: Client closed the connection". Count: service=0 broker=7
    [24/Jun/2009:01:19:22 BST] [B1066]: Closing: [email protected]:36246->jms:35424 because "[B0059]: Client closed the connection". Count: service=0 broker=6
    [24/Jun/2009:01:19:22 BST] [B1066]: Closing: [email protected]:54965->jms:35424 because "[B0059]: Client closed the connection". Count: service=0 broker=5
    [24/Jun/2009:01:19:22 BST] [B1065]: Accepting: [email protected]:59844->jms:35424. Count: service=5 broker=6
    glassfish server log snippets
    [#|2009-06-24T00:59:13.547+0100|FINER|sun-appserver2.1|javax.resourceadapter.mqjmsra.outbound.connection|_ThreadID=14;_ThreadName=p: thread-pool-1; w: 8;ClassName=com.sun.messaging.jms.ra.SessionAdapter;MethodName=constructor();com.sun.messaging.jms.ra.ConnectionAdapter@171e8ba;BrokerAddress=localhost:7676(35424), ConnectionID=1429085906906648832, ReconnectEnabled: false, IsConnectedToHABroker: false;ConnectionID=1429085906906648832, SessionID=1429085906980997632;_RequestID=a8911f36-6814-472b-9d49-a7bac8f6b2d8;|ENTRY com.sun.messaging.jms.ra.ConnectionAdapter@171e8ba BrokerAddress=localhost:7676(35424), ConnectionID=1429085906906648832, ReconnectEnabled: false, IsConnectedToHABroker: false ConnectionID=1429085906906648832, SessionID=1429085906980997632|#]
    [#|2009-06-24T00:59:13.598+0100|FINER|sun-appserver2.1|javax.resourceadapter.mqjmsra.outbound.connection|_ThreadID=14;_ThreadName=p: thread-pool-1; w: 8;ClassName=com.sun.messaging.jms.ra.SessionAdapter;MethodName=constructor();com.sun.messaging.jms.ra.ConnectionAdapter@171e8ba;BrokerAddress=localhost:7676(35424), ConnectionID=1429085906906648832, ReconnectEnabled: false, IsConnectedToHABroker: false;ConnectionID=1429085906906648832, SessionID=1429085906981010432;_RequestID=a8911f36-6814-472b-9d49-a7bac8f6b2d8;|ENTRY com.sun.messaging.jms.ra.ConnectionAdapter@171e8ba BrokerAddress=localhost:7676(35424), ConnectionID=1429085906906648832, ReconnectEnabled: false, IsConnectedToHABroker: false ConnectionID=1429085906906648832, SessionID=1429085906981010432|#]
    .............

  • Error: failed to commit transaction (failed to retrieve some files)

    Hello, I am trying to get a fresh install of arch linux going, but,
    When I exectute pacstrap -i /mnt base base-devel, I get an error:
    warning: failed to retrieve some files
    error: failed to commit transaction (failed to retrieve some files)
    Errors occured, no packages were updraded
    ==> EDDOR: Failed to install packages to new root
    I have no clue what is wrong, I tried changing my nameserver, updating the keyrings, and updating the system. How can I fix this?
    Thanks!
    Last edited by Whiskertoes (2015-02-03 02:46:53)

    Yeah, right before this it gives the same error multiple times:
    error: could not open file /mnt/var/cache/pacman/pkg/vi-1:05325-4-x86-64.pkg.tar.xz.part: Invalid argument
    This error fills the entire screen, I am relatively new to arch, please help

  • In App Purchase Error, ( Transaction Failed Cannot connect to iTunes Store)

    O.k. on my iPhone when I'm in an app I tried to purchase something and it won't let me by saying, Transaction Failed, Cannot Connect to iTunes Store.. But I'm able to use the same app on my iPod touch and I can purchase what I needed.... So can somebody help me figure out what the reason is behind it? Both the iPhone and the Ipod has the same account information and both uses the same computer to connect to iTunes.... So why does one work and the other doesn't? Also its an iPhone 3Gs...

    Although you may be using the same iTunes Account, things can get a little strange if you have different AppleID's for each device. On your device, check settings ==> Store. The AppleID for that device is listed there. It can be confusing because syncing to the same iTunes account is not the same as managing App and purchases through the iTunes Store Account.
    On your iTunes window the uppe right corner shows which AppleStore ID is logged in. If it turns out they are different, simply log out of the store on iTunes, and log in with the other account. Download the updates. Log out and then back in to the other account.
    As an alternative, download the updates on the device they were purchased. Sync to iTunes, and the updated download be transferred back to iTunes and available to the other devices syncing with iTunes.
    Or....... if your iPhone is Airplane Mode, turn that Airplane mode off and ignore everything from above.

  • Error while comitting a transaction in oSB. The following is the error stack

    Error while comitting a transaction in OSB. The following is the error stack
    <Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
            java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
            java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
            at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
            at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
            at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
            at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
            at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
            at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
            at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
            at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
            at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
            at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
            at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Hi,
    Have you tried Cancelling the release before adding the version?
    Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
    Please let me know if it worked!
    Vijay

  • Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?

    Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?
    Thanks.

    The system is set up to backup files to the iCloud at the end of the day. This has ot happen for sometime now and the mesaage I get is the back up error.

  • ORA-20998: Transaction Failed on Headstart Utilities 6.5 installation

    Hello,
    I am having problem when running insthsu.sql script to install
    Headstart utilities 6.5. We are doing client/server approach. The
    server is Sun 450 - Oracle 8.1.7.0.0
    Designer 6i Release 4 repository was installed on the server.
    How far was the installation:
    1. Installed HST65 --> No problem found
    2. Installed HDEMO65 --> No problem found
    3. Failed on the following statement on insthsu.sql script:
    ... installing Quality Check utilities
    execute hsu_qa_app.install;
    error message:
    hsu65@devl> execute hsu_qa_app.install
    BEGIN hsu_qa_app.install; END;
    ERROR at line 1:
    ORA-20998: Transaction Failed
    ORA-06512: at "HST65.QMS$ERRORS", line 128
    ORA-06512: at "HST65.QMS_TRANSACTION_MGT", line 814
    ORA-06512: at "HSU65.CG$AIS_HSU_UTILITIES", line 39
    ORA-04088: error during execution of
    trigger 'HSU65.CG$AIS_HSU_UTILITIES'
    ORA-06512: at "HSU65.HSU_INSTALL", line 132
    ORA-06512: at "HSU65.HSU_QA_APP", line 40
    ORA-06512: at line 1
    Any idea or direction where should I go from here?
    Thanks,
    Sanny Subowo

    Ali,
    You are running into a bug in the install form. It sees the tables that you imported manually (like the message told you to do), and then complains about them. The best thing to do is change the code in the hsdinst.fmb where the check for existing objects is performed in program units CHECK_USERS:
    function hsu_objects_exist
    return boolean
    is
    cursor c_chk
    is
    select 'x'
    from user_objects
    where object_name like 'BL_%'
    -- or object_name like 'HSU_%'
    -- or object_name like 'OMR_%'
    So comment out the two lines as indicated above and recreate the fmx.
    Kind regards,
    Peter

  • Getting error after enabling the Transaction in SSIS package in Windows Server 2008 R2 Standard machine

    Hi,
    I created a package with "Execute SQL Task and Data Flow Task". I am able to execute successfully in my server having
    "Windows Server 2008 R2 Standard" Operating System.
    But after enabling the Transaction in my SSIS Package I am not able to execute it. It is giving error. The same package is running in my local machine with Transaction enabled on
    Windows 7 Operation System.
    The error which I got in my server after enabling the Transaction is
    "The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D025 
    "The partner transaction manager has disabled its support for remote/network transactions.".  End Error "
    I search with this error message in google and found some solutions in the following links
    http://social.msdn.microsoft.com/Forums/en-US/7172223f-acbe-4472-8cdf-feec80fd2e64/the-partner-transaction-manager-has-disabled-its-support-for-remotenetwork-transactions
    http://technet.microsoft.com/en-us/library/cc753510(WS.10).aspx
    http://support.microsoft.com/kb/817064
    But none of the above solution is not working. Kindly help me to resolve this issue.
    Thanks in Advance.
    Sridhar

    Hi Sridhar,
    Please compare the DTS settings on the Windows 7 computer and the Windows Server 2008 R2 computer and make sure they are identical.  Make sure the “Allow Inbound” and “Allow Outbound” options are check, and pay attention to the authentication mode as
    well.
    Besides, make sure both Distributed Transaction Coordinator (TCP-In) and Distributed Transaction Coordinator (TCP-Out) rules in Firewall are enabled.
    If the issue persists and there are any security/anti-virus software, temporarily disable the security/anti-virus software and check the issue again.
    Regards,
    Mike Yin
    TechNet Community Support

  • MSCA-Receiving PO items from Scanners- *Online transaction fail*

    Hi,
    While receiving PO's from scanners,getting the following error - "Online transaction fail"..issue is only with one OU..i can receive in another OU in same instance...also issue is specific to one instance.
    Has any one encountered such issue?
    Rgds,AP

    Helios,
    Many thanks for quick answer..not sure this note would help me..as mentioned earlier issue is only with one particular OU..in the same instance..other OU's are working..in another test instance even this OU is also working..not sure how to debug.
    Any support is much appreciated.
    -AP

  • Transaction Processor Error in View Pending Transactions

    Dear All,
    I am getting the Error: "Transaction Processor Error" in View Pending Transactions.
    How can I identify due to what reason, this error had occured
    because of this I am not able to close the inventory period for these transaction months..
    and also I am having the following Error msg for another item in view Pending Transactions..,
    How can I clear this ..?
    Please update...
    Many Thanks in advance....
    Edited by: santark on Nov 10, 2009 6:46 PM

    Hi,
    This is not really and error. Oracle processes transaction in a batch. If one record will fail because of some error, other records/transaction in the batch fails with this error. For this error you really need to get the ERROR_EXPLANATION to find out the exact message as to why it is possibly failing. These can usually have their three flags reset and re-submitted as this error is usually attached to those records in a group where one of the records has been erred with one of the more severe errors.
    I believe you can resubmit the transactions which are failed with the below script
    Update mtl_material_transactions_temp
    set      process_flag = ‘Y’,
         lock_flag = 'N',
         transaction_mode = 3,
    error_code = NULL
    Where organization_id = &org_id
    Thanks,
    Raghav

  • Authorization of credit card transaction failed. Failure in Authorization

    Hello All,
    I am getting the below error while doing Auto-Receipts in R12.1.3.
    Authorization of credit card transaction failed. Failure in Authorization
    Please guide me to identify the issue.
    Thanks and Regards,
    Muthu

    Hi,
    Thank you very much for your support.
    But still i'm getting the same error. I read in one site the below step(Marked as Bold), This could be the reason why the error is occurring..
    But I don't know how to check, If any one know about the below step, let me know.
    Depending upon the function security options set up by your system administrator, you might be able to create, format, and approve Automatic receipt batches in one step.
    Thanks and Regards,
    Muthu

  • *** ERROR = BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.

    Hello All,
    In our development system,  we are able to perform all the transactions normally(SAP level) and there is no performance issues..
    We have checked from OS level in work directory file dev_disp..
    We are getting below error.
    Can you please suggest us on this..............
    =========================================================
    ERROR => DpRqCheck: T72 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
    -IN-- sender_id DISPATCHER        tid  72    wp_ca_blk   -1      wp_id -1
    -IN-- action    SEND_TO_WP        uid  8012   appc_ca_blk -1      type  DIA
    -IN-- new_stat  NO_CHANGE         mode 0     len         -1      rq_id 53650
    -IN-- req_info  MS_ERROR
    ERROR => DpRqCheck: T73 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
    -IN-- sender_id DISPATCHER        tid  73    wp_ca_blk   -1      wp_id -1
    -IN-- action    SEND_TO_WP        uid  8013   appc_ca_blk -1      type  DIA
    -IN-- new_stat  NO_CHANGE         mode 0     len         -1      rq_id 53651
    -IN-- req_info  MS_ERROR
    ERROR => DpRqCheck: T74 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
    -IN-- sender_id DISPATCHER        tid  74    wp_ca_blk   -1      wp_id -1
    -IN-- action    SEND_TO_WP        uid  8014   appc_ca_blk -1      type  DIA
    -IN-- new_stat  NO_CHANGE         mode 0     len         -1      rq_id 53652
    -IN-- req_info  MS_ERROR
    ERROR => DpRqCheck: T77 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
    -IN-- sender_id DISPATCHER        tid  77    wp_ca_blk   -1      wp_id -1
    -IN-- action    SEND_TO_WP        uid  8019   appc_ca_blk -1      type  DIA
    -IN-- new_stat  NO_CHANGE         mode 0     len         -1      rq_id 53653
    -IN-- req_info  MS_ERROR
    Wed Apr  7 08:55:32 2010
    ***LOG Q0K=> DpMsAttach, mscon ( ussapdir00) [dpxxdisp.c   10127]
    Wed Apr  7 08:55:33 2010
    use SAPLOCALHOST=<ussapdir00> as internal hostname
    NiPAccept: accept failed (socket=7;errno=72)
    ***LOG Q0I=> NiPRead: recv (73: Connection reset by peer) [niuxi.c 928]
    SoftCancel request for T45 U8133 M0 received from REMOTE_TERMINAL
    Network error of client T46, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T46 is 10.228.250.65(10.228.250.65)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (8135 MKK27890 46 BREWL07D4359) [dpxxdisp.c   9830]
    RM-T46, U8135, 620     MKK27890, BREWL07D43598, 08:43:19, M0, W4,     , 2/0
    Network error of client T45, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T45 is 10.228.250.65(10.228.250.65)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (8133 RR606033 45 BREWL07D4359) [dpxxdisp.c   9830]
    RM-T45, U8133, 600     RR606033, BREWL07D43598, 08:38:22, M0, W0, SPRO, 2/3
    Release check o.K.
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    MBUF state ACTIVE
    Wed Apr  7 08:55:39 2010
    ERROR => DpRqCheck: T45 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
    -IN-- sender_id DISPATCHER        tid  45    wp_ca_blk   -1      wp_id -1
    -IN-- action    SEND_TO_WP        uid  8133   appc_ca_blk -1      type  DIA
    -IN-- new_stat  NO_CHANGE         mode 0     len         -1      rq_id 53678
    -IN-- req_info  LOGOFF CANCELMODE
    Wed Apr  7 08:55:44 2010
    ERROR => DpRqCheck: T46 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
    -IN-- sender_id DISPATCHER        tid  46    wp_ca_blk   -1      wp_id -1
    -IN-- action    SEND_TO_WP        uid  8135   appc_ca_blk -1      type  DIA
    -IN-- new_stat  NO_CHANGE         mode 0     len         -1      rq_id 53676
    -IN-- req_info  LOGOFF CANCELMODE
    ======================================================================
    Thanks in advance..
    Best Regards,
    Kiran

    Hi Kiran,
    It's not a problem or error, it's just a message and hence can be ignored. However you can check out SAP note 1111154 once, it will fix the issue probably if it's happening due to HTTP problem. Else you can very well ignore it.
    Regards
    Sourabh Majumdar

  • "Error occurs when loading transaction data from other model" - BW loading into BPC

    Hi Experts,
    I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
    If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
    Task name CONVERT:
    No 1 Round:
    Error occurs when loading transaction data from other model
    model: AIACONS. Package status: ERROR
    As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
    Has anyone encountered similar or have any ideas as to the problem?
    Best,
    Chris

    Hi Vadim,
    It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
    We get a warning when we try and validate the transformation file:
    "Error occurs when loading transaction data from other model".
    This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself.  The validation log says:
    Validate  and Process Transformation File Log
    Log creation time
    3/7/2014 16:09
    The result of validation of the
      conversion file
    SUCCESS
    The result of validation of the
      conversion file with the data file
    FAIL
    Validation Result
    Validation Option
    ValidateRecords = NO
    Message
    Error occurs when loading transaction data from other model
    Reject List
    I can't find any errors anywhere else.
    Best,
    Chris

Maybe you are looking for

  • I can't get itunes to open on additional computer

    I have itunes loaded on one computer and just loaded on new laptop with Windows 7.  When I try to log in to itunes store on new computer, it only loads 1/2 way and then stops.  Still works fine on old computer.

  • Baseline Date of terms of payment

    HI, I need some help with something, how i can enter the baseline date of term of payment manually? I see in the OBB8, that appear 4 option of baseline date, but not manually. Is there any configuration in SD that prompts this action? please give me

  • Adobe ANE stageAd is not working in App Store

    I am using com.adobe.ane.stageAd package with starling game I made (GravityEscape - it is an iPad game approved and released in store). Here is my problem, I am trying to show banner ads but they will not work. a) In development test ads DID show. I

  • How to register for class while using ActiveX

    Hi I am trying to use ActiveX to send an email with Microsoft Outlook. I have found an example Vi. but i was getting an error with code "-2147221164" (Class not registered in Outlook_Mail-1.vi). How to register for that class and what are the files r

  • Have Both 11.3 and 11.4 plugins installed.

    After seeing 11.4 came out, i tried to update my plugins. When that did not update it, i just manually downloaded 11.4.402.265. But even after restarting i still have 11.3.300.271. Is there any way to fix this? i currentlly have 11.3 "disabled" incas