Error in ERP 6.0 Rapid Installer - "brconnect.exe - Entry Point Not Found"

Hi
I have the installer for ERP 6.0 + NW 7.0, but option "SAP System" was missing in installation menu.
Then I downloaded ERP 6.0 (Rapid Installer, Oracle) from market place
Followed the following steps
    - Install Oracle 10.2.0.1.0
    - Install downloaded ERP 6.0 (Rapid Installer)
    - But this stopped with an error
        brconnect.exe - Entry Point Not Found
            The procedure entry point longjmp could not be located in the dynamic link library orauts.dll.
orauts.dll is oracle' client dll
When I checked BRTool' version using command
    *************************************************************************************************************************C:\Documents and Settings\Administrator.CING4468>brtools -V
BR0651I BRTOOLS 7.00 (6)
Patch   Date     Info
release note               849483
kernel release             700
patch date                 2005-08-31
patch level                6
make platform              NTintel
make mode                  OCI_10103_SHARE
make date                  Sep 19 2005
Here make mode is "OCI_10103_SHARE"
Rapid installer guide as well as documentation shows that this setup supports Oracle 10.2 but BRTools version shows compatibility with 10.1.
Is it error because of database version mismatch?
Thanks !
Ruhi Hira

Check for the ora<sid> group and also check the env variable for ora<sid>. This should solve the issue.

Similar Messages

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

Error: iTunes.exe Entry Point Not Found

I recently upgraded my iTunes to the latest version and am now receiving the following error when I try to open it:
"iTunes.exe - Entry Point Not Found
The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll."
and when I click ok it then gives me this error message
"iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)"
I have tried the following several times:
reinstalled/repaired iTunes
reinstalled/repaired QuickTime
reinstalled/repaired Apple Software Update
reinstalled/repaired Apple Application Support
none of which have worked. I get the error each time i try to open iTunes and then it just shuts down.
I have also tried to open iTunes in safe mode - per a recommended solution on another thread - which does not work. And I changed my control panel/quicktime/audio settings to safe mode - per a recommended solution on another thread - which does not work.
I have not added any other new software
I am on an old lenovo T61 laptop with Windows XP
Any and all suggestions would be greatly appreciated.
Thanks in advance!
Charles

This thread has a solved star:
http://discussions.apple.com/thread.jspa?messageID=3918542

I'm getting the following error message: AppleSyncNotifier.exe - Entry Point Not Found. What do I do?

I recently upgraded the o/s to 4.3.5 but now get the following error message, what do I do?
AppleSyncNotifier.exe - Entry Point Not Found
The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Hi Molly - I can tell you're frustrated and I will do my best
Can you tell me whether you have a 32bit or 64bit system. You can find out in the following way
Windows Vista or Windows 7
If you have Windows Vista or Windows 7, there are two methods to determine whether you are running a 32-bit or a 64-bit version. If one does not work, try the other.
Method 1: View System window in Control Panel
Click Start, type system in the Start Search box, and then click system in the Programs list.
The operating system is displayed as follows:
For a 64-bit version operating system: 64-bit Operating System appears for the System typeunder System.
For a 32-bit version operating system: 32-bit Operating System appears for the System typeunder System.
Method 2: View System Information window
Click Start, type system in the Start Search box, and then click System Information in thePrograms list.
When System Summary is selected in the navigation pane, the operating system is displayed as follows:
For a 64-bit version operating system: x64-based PC appears for the System type under Item.
For a 32-bit version operating system: x86-based PC appears for the System type under Item.
If you have a different OS (operating system) let me know which one and I'll tell you how to find that out.
Once I know I should be able to give you the fix.
Cheers

Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                           OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36

I started up and plugged in my iPad and then the following message came up:
       iTunes
❗️This iPad cannot be used because the required software is not
    Installed. Run the iTunes installer to remove iTunes, then install
    the 64-bit version of iTunes.
                                                                                         OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
      Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
    failed to start. Verify that you have sufficient
    Privileges to start system services.
   Abort.               Retry.                Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
      iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
      Your computer. Try reinstalling the program to fix the problem.
                                                                                       OK
Press OK and then the next message:
       iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
      Error 7 (Windows error 126)
                                                                                       OK
Any suggestions?

TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

Error: Javaw.exe - Entry point not found

Hi,
I've stuck in a problem during following the OWB runtime repositiory Assitant
i got a error message
javaw.exe - entry point not found
The procedure entry point OCIconnectionpoolcreate could not be located in the dyanimic link library OCI.dll
Plz help
Edited by: Nitesh Bhagat on Mar 18, 2009 8:29 AM
Edited by: Nitesh Bhagat on Mar 19, 2009 7:02 AM

Hi Nitesh.
Is there any other error message or details?
Wich version are you using? What are you trying to do in the assistant (create rep, drop rep, ...)? Did this software ever worked or is this a new installation?
Usually, this is related to the PATH variable and a new installation of other oracle products.
If this persists, try deinstall a install OWB again.
Good luck!
Marcos

Error: EdgeInspect.exe - Entry Point Not Found

I'm getting the following error message when launching the Adobe Edge Inspect:
---------------------------EdgeInspect.exe - Entry Point Not Found---------------------------The procedure entry point SetGestureConfig could not be located in the dynamic link library USER32.dll. ---------------------------OK   ---------------------------
Followed by another dialog mentioning C:\Program Files (x86)\Adobe\Adobe Edge Inspect\EdgeInspect.exe Edge Inspect has stopped working
More details:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          EdgeInspect.exe
Application Version:          1.0.372.4762
Application Timestamp:          51098b6d
Fault Module Name:          USER32.dll!SetGestureConfig
Fault Module Version:          6.0.6002.18541
Fault Module Timestamp:          4ec3e39f
Exception Code:          c0000139
Exception Offset:          0006f52f
OS Version:          6.0.6002.2.2.0.256.6
Locale ID:          1033
Additional Information 1:          9d13
Additional Information 2:          1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3:          9d13
Additional Information 4:          1abee00edb3fc1158f9ad6f44f0f6be8
I tried googling but I haven't found any solutions, so I thought I'd ask for help here.

No, there is no timeline like that. Vista support for any product will vary from team to team depending on a huge variety of factors.
For us, we're not even sure why it no longers works on Vista. As I said above, it could be a recent change we made or a change in one of the libraries we use with the desktop application. The solution is nowhere near as simple as posting the older version of the desktop application. Edge Inspect is a system of multiple pieces that all have to work together and be able to communicate with each other. Even if we posted the older version of the desktop piece, it's likely that you'd find Edge Inspect features that didn't work because the other pieces no longer spoke to it correctly. It would get progressively worse with each release until it stopped working entirely. And we simply don't have the resources to support a Vista version of the desktop application and keep it up to date with all the other pieces of the application.
We never devoted any of our limited dev or testing resources to testing on Vista and can't start doing that now. In our original FAQ we noted that it was not supported but that we didn't know of any issues with Edge Inspect running on Vista. That's now changed. I've updated the FAQ, and we'll be modifying the installer to reflect the new situation.
I'm sorry, but the final word from engineering and product management is in, Edge Inspect does not support Vista.

When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."

When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."

Are you really using Windows ME?<br />
Your More system details list shows an IE8 user agent
You need to do a clean reinstall and remove the Firefox program folder before installing a newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

After upgrading to 10.5 itunes.exe entry point not found. tried reinstalling 3 times gives error 7, tells me to reinstall. help please!

After upgrading to itunes 10.5 itunes.exe - entry point not found message appears. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll (this mesage appeared) Reinstalled 3 times then I get message itones not installed correctly error 7. I give up. Help!

I started up and plugged in my iPad and then the following message came up:
       iTunes
❗️This iPad cannot be used because the required software is not
    Installed. Run the iTunes installer to remove iTunes, then install
    the 64-bit version of iTunes.
                                                                                         OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
      Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
    failed to start. Verify that you have sufficient
    Privileges to start system services.
   Abort.               Retry.                Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
      iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
      Your computer. Try reinstalling the program to fix the problem.
                                                                                       OK
Press OK and then the next message:
       iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
      Error 7 (Windows error 126)
                                                                                       OK
Any suggestions?

Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.

Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
Arun

Please try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta

When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

I see a AppleSyncNotifier.exe - Entry Point Not Found error when my PC starts.

when booting up my computer, even before I try to bring up itunes, I get the following error message:
AppleSyncNotifier.exe - Entry Point Not Found
the procedure entry point ___cfconstantstringclassreference could not be located in the dynamic link library core foundation.dll
But once I click off the message, everything seems to work fine.
how can I correct this problem?
2 IPod 5.1.1
1 IPad 2 wifi
Windows Vista 32

Try here > http://www.pchelpforum.com/xf/threads/applesyncnotifier-exe-entry-point-not-foun d.124298/

My iTunes won't open on Windows XP. iTunes.exe - Entry point not found, Error 7 (Windows Error 127)

When I open iTunes, I get a message saying under iTunes.exe - Entry Point Not Found, it says, The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. And I'm not talking about the AppleSyncNotifier.exe. Along with that, I get the message saying, "iTunes was not installed correctly. Please reinstall i Tunes." Error 7 (Windows Error 127). That's why I'm unable to open iTunes. I sure hope to see a solution to those problems soon.
I know I've mentioned this before, but I've now given a little more info to make my explanation more clear.

Try this one from Article TS3074
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074

Error in ERP 6.0 Rapid Installer - "brconnect.exe - Entry Point Not Found"

Similar Messages

Maybe you are looking for