Error in/error out

Hello. I want to learn to manage the cluster error in/out. Attached there is the VI that I have created.
As you can see I think that I can handle properly the error out (I can modify the status/the string etc etc)...what I want to do (but I don't know how to) is modify the error in.
I mean if i get as input -1 I saw the message in error out but i want that also the error in change his status (boolean/string/code).
Can you tell me how to do it?
Thank you
Attachments:
Exercise3.vi ‏13 KB

Which error do you want in the Error In terminal.
If you want the Error Out String in Error In (where i dont find any logic) you will need to put the local variable of the Error In Control and connect it to the Error Out terminal.
=========================================
Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
Mangesh D.
CLAD | Project Engineer
==
VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....

Similar Messages

I am trying to update the iPhone 3GS to IOS5. At download i get an error - network timed out. Repeated tried several times. Is there an issue with the Apple Update Server or too much rush ? How do i update my phone using iTunes?

I am using iPhone 3GS. It is currently updated to IOS4.3. I am trying to update the OS to IOS5 on iTunes. It downloads the software, but it gives an error - network timed out. I have tried this multiple times. But, the end result is same.
Please help & advise as how I can upgrade the iPhone to IOS5.

Temporarily turn off or disable your firewall and anti-virus software and try the download again.
Stedman

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

How to resolve this Error ORA-04030: out of process memory when trying to a

Hi
I am connecting as a sysdba and trying to execute a query on the V$Logmnr_contents but getting the following Error
ORA-04030: out of process memory when trying to allocate 408 bytes (T-LCR
structs,krvuinl_InitNewLcr)
Can anyone guide me how to resolve this issue.
Thanks

Hi,
As root user, edit the /etc/sysconfigtab file, and try to set the udp_recvspace parameter to 262144 and reboot the machine :
inet:
udp_recvspace = 262144
Metalink note 297030.1 Ora-04030 During Execution Of LogMiner Query
Nicolas.

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when it is not. How can I fix this issue?

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when iall other programs are closed. How can I fix this issue?

Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

"Multi-level error propagation carried out" in SCM 5.0

When I use the SNP PPM Generation With Lot Size Margin function in SCM 5.0, I got the following error:
Multi-level error propagation carried out
Message no. /SAPAPO/OM242
Could you please give me this help?
Thanks,
Lian

Hi,
Thank you for the information, but the problem is still there though I de-activated all user-exits...
I also saw the following error:
Invalid planning version
Message no. /SAPAPO/OM015
Thanks,
Lian

Multi-level error propagation carried out Error in APO

Dear Experts,
We had developed a custom program that is same as /sapapo/rrp3 report, but the issue is when we use planning version other then 000 the custom program is giving the error ""Multi-level error propagation carried out"" but the RRP3 report works fine with all the planning versions.
Please help to find the cause and to solve the issue.
Thanks.
Regards
Abhinav Nallani.

Dear Arek,
The problem is not yet resolved . we have raised an OSS note for the same.
as the relevant notes are already implemented in our case.
regards
Kiran

Error "Multi-level error propagation carried out" when I run a report

Hi All,
When I run the report /SAPAPO/CDPS_REPT - Order and Resource Reporting with the below criteria I getting error "Multi-level error propagation carried out"
Planning Version - Simulation Version XXX
Evaluation Start - 05/03/2011
Evaluation End - 12/31/2013
Evaluation List - Extended Operation List
I do not get error when I run the report with selection as Active version 000 and Evaluation List as Order List, Operation List.
I have tried by ruuning Live cache consistancy check, but the issue is not fixed
Please help me to resolve this issue
Thanks & Regards,
Rajkumar

Hi Jack,
Please do post the server log file here so that we can try and find a solution for the problem you are facing.
I had a problem a while ago with the app server too. While trying to run an application, after a few times, it would give me an error message saying the Application Server cannot be started. I rebooted my machine and thankfully it worked again. Just try this too and see if it works.
If it doesnt we can go through the server log and try to identify the cause of the problem.
Cheers :-)

CIF error-Multi-level error propagation carried out

Dear ALL,
When i am trying activate the integration model for Material transfer it generates queue with status SYSFAIL with message "Multi-level error propagation carried out".
and the integration model is not activated.
please help
regards
Kiran

Dear Arek,
The problem is not yet resolved . we have raised an OSS note for the same.
as the relevant notes are already implemented in our case.
regards
Kiran

Realignment showing multilevel error propagation carried out and

While executing realignment table it is showing following :-
Realignment showing multilevel error propagation carried out
Realignment of live cache time series aborted
Have seen all consistency checks and everything is fine no alerts received.
Please suggest
vikas

Hi Vikas,
I am assuming that you have maintained the Realignment table properly meaning you have only the necessary entries and removed all unwanted entries. Having assumed that the other reason why this error can come up is when you try to realign more than 1 Characteristic Value in the same table entry.
For Example.
Let us you have 3 Characterstics viz, product, location,customer.
If for Product P1, you are trying to change the location from L1 to L2 and customer from C1 to C2 then there is a possibility such an error might occure.
In such cases we need to create 2 entries as follows
1) P1 L1 C1 to P1 L2 C1
2) P1 L2 C1 to P1 L2 C2.
It is better to avoid Multiple characteristic changes in a single step.
Hope this helps.
Thanks
Mani

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Officejet Pro 8600 Premium won't print cardstock - error message of "out of paper" appears

My printer won't print cardstock, the error message says "out of Paper". I have tried 3 different types of cardstock and it won't accept any of them. It will print on plain paper. Is this machine defective? HELP...URGENT
I must be able to print cardstock. The computer was just set up today...it is brand new and purchased directly from HP.

After trying a lot of different things, for some God-only-knows reason, this is the trick that worked for me. This is really more of a hack than a true fix, but I'm not picky when it's 2 AM and I don't have any other options:
(1) In the paper tray, alternate one sheet of the cardstock paper with one sheet regular plain paper. Make sure the tray is full, but not over-full. (This HP help article says not to do that but... whatever.)
(2) In the Print dialogue box (however you can get to it) select the "Plain Paper" preset (not "thick paper" or "cardstock"). I had it on "Best" as you can see it the screen shot, but I don't think this is important.
(3) I only had a single-page document, which I needed to print 30 copies of, so I inserted a blank page as a second page in the document file (a pdf).
(4) I then made sure "Collate" was selected in my print settings.
If you have a multi-page document, maybe you will need to insert a blank page every other page... which sounds like a pain, and I feel for you.
Note: You'll need to monitor the printing closely - if ever the printer pulls two pages through instead of one, you'll need to pull the paper tray out and add a piece of paper so it's alternating correctly.
With this, I was able to print multiple copies without ever stopping. After a full day of fighting with the printer (which may or may not have included sacrifices of limbs under a full moon to the printer gods... just kidding) this was like magic.
Hope this works for you - or other people who read this thread. This is a really frustrating situation.
PS. Before I did this, I also did a full reset of the printer, which included:
1. Turning off the printer and unplugging it for a full minute
2. Printing 100 blank pages
I have no idea if this helps, but if this hack isn't working for you, this "reset" is worth a try.

Error ORA-04030: out of process memory when trying to allocate 8512 bytes

Good Afternoon estimated
I want to see if anyone has the following problem occurred while there are about 70 concurrent connections to the Oracle instance. if anyone has any solution.
is grateful for the help in advance:
Dump file d:\oracle\data\admin\ppmdb\bdump\ppmdb_mmon_5032.trc
Thu Aug 11 09:23:40 2011
ORACLE V10.2.0.4.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 8 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5642M/8181M, Ph+PgF:17775M/20246M, VA:9M/2047M
Instance name: DBMM
Redo thread mounted by this instance: 1
Oracle process number: 11
Windows thread id: 5032, image: ORACLE.EXE (MMON)
*** 2011-08-11 09:23:40.429
*** SERVICE NAME:(SYS$BACKGROUND) 2011-08-11 09:23:40.413
*** SESSION ID:(161.1) 2011-08-11 09:23:40.413
*** KEWROCISTMTEXEC - encountered error: (ORA-04030: out of process memory when trying to allocate 8512 bytes (pga heap,kgh stack)
*** SQLSTR: total-len=267, dump-len=240,
STR={insert into wrh$_sysmetric_history (snap_id, dbid, instance_number, begin_time, end_time, intsize, group_id, metric_id, value) select :snap_id, :dbid, :instance_number, begtime, endtime, intsize_csec, groupid, metri}
===============
Note: This allows us to continue to connect more users and the only way to make new connections is restarting the instance
I Have Configurate: pga_aggregate_target integer 379584512
Total System Global Area 1577058304 bytes
Fixed Size 1299216 bytes
Variable Size 729812208 bytes
Database Buffers 838860800 bytes
Redo Buffers 7086080 bytes
Thank you for your possible help
Claudio T.

804135 wrote:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
Windows NT Version V5.2 Service Pack 2
Memory (Avail/Total): Ph:5642M/8181M, Ph+PgF:17775M/20246M, VA:9M/2047M
I Have Configurate: pga_aggregate_target integer 379584512
Total System Global Area 1577058304 bytesHave a search on this forum (or google) for the error code, there should be lots of previous discussion on this one.
From no sign of 64-bit in the product banner plus VA (address space) 2 GB (close enough), it looks like the server is running as 32-bit process.
With SGA + PGA (target) adding up to nearly 1900 MB, my guess is you are hitting the 2 GB per process limit.
Lower SGA, it should help in the very short term. For longer term: lower resource demands or start planning for migration to 64-bit.

Error: ORA-04030: out of process memory when trying to allocate 639232 byte

I had encountered a problem while i'm trying to compile a package. The error is : Error: ORA-04030: out of process memory when trying to allocate 639232 byte. Pls advice what can i do?
Thanks

OK, it looks like there's something else that's hogging your memory on that server. What do you see when you go into Task Manager, then select Processes, and then 'Mem Usage'?
Edit:
Although this would appear to be high: Max PGA Allocated:1.66GB
What are your settings for pga_aggregate_target, and workarea_size_policy?

ERROR : ORA-04030 -out of process memory when trying to allocate 16396 byte

hi,
i have written a procedure that insert as well as update few table.
But when i am trying to execute the procedure then it throws error:
ORA-04030: out of process memory when trying to allocate 16396 bytes something like that.
I don't know why it is?
I am using cursor with bulk collect and forall block to insert and update.

The error message says that you ran out of PGA memory. You are bulk collecting into a variable that resides in PGA memory. So likely you fetched everything from the query into the collection variable at once. You would need at least (number of rows of result set * average number of bytes per row) bytes. And you don't have that amount of bytes apparently.
A solution is to use the limit clause while bulk collecting and set it to a reasonable amount of rows, say 100 or 1000 at most. And use an extra loop while exiting when <collection variable>.count = 0.
Regards,
Rob.
Message was edited by:
Rob van Wijk
Way too slow ...

Nokia Internet Radio Error: Connection Timed Out. ...

Hi,
I'm having an issue with the Nokia Internet Radio application on the Nokia N95. The app launches ok but if I try and browse the station directory or perform a search I get the error 'Connection Timed Out. Try Again' This happens almost instantly i.e. it doesn't look like it's even trying to connect. If I go to the shoutcast site and click on the 'Tune In' button next to a station the Internet radio app launches and I get an error saying 'General: System Error' and the application closes then goes back to the browser and a message saying 'Web: No Gateway Reply' The application worked fine up until recently. I upgraded to FW V 21.0.016 and hasn't worked since so it may be that this has caused the problem. I've removed and re-downloaded \ re-installed the software but still get the same issue. Web browsing works fine, so I know my internet settings are fine, and the old open-source version of the radio player even works so it's just an issue with this app. Any advice on how to fix it would be much appreciated. Thanks.

I had the same problem and I fixed it. For me, it was because I am on the Rogers network in Canada. Regardless of where you are many cellular neworks use firewalls and something called NAT (Network Address Translation). Nokia should really make people aware of this because probably 50% of people around the world have this problem. The solution for me was to use Rogers VPN or Public IP to access the internet. Rogers blocks access to this internet connection so you have to add the service to your account for $10 per month but I have heard that other carriers like FIDO have not blocked access to it.
On the Nokia n79 this requires creating a new access point under TOOLS>SETTINGS>CONNECTIONS>DESTINATIONS. Add a new access point with the following settings:
Connection Name: Rogers VPN (or whatever you want to call it)
Data Bearer: Packet Data
Access Point Name: vpn.com
User Name: wapuser1
Prompt Password: No
Password: wapuser
Authenticaiton: Normal
Homepage: None
Use Access Point: After Confirmation (or change if you want something else)
That's it. When you load the internet radio Application and it lists your options select "Rogers VPN". If you don't see it in the list, press the soft button for Options then "Select Access Point" and you will see the full list. If you want the VPN to be the first thing you see you can change the priority under destination settings. Just select the VPN and press "Organize" then "Change priority".

Error in/error out

Similar Messages

Maybe you are looking for