Error in evaluations tab of a control

Hello Experts,
In the evaluations tab of a control, when we try to open activities Monitoring, Control Effectiveness (MO, CO) it is showing the error (as shown in screenshot).
But we are able to open activities related to control design and control self-assessment.
Could any one suggest what could be the issue.
Regards,
Ramakrishna Chaitanya

HI,
I am having dump.Please suggest me the note.

Similar Messages

  • Message no. DPR_FIN_GECCO024 Error occurred in accounting - see link controlling cockpit (cProjects)

    Hi, everyone
    I'm integrating PS( which is on IDES system ECC6 PH6) with cProjects( which is on DEV system ECC6 PH6 PPM 5.0). I've done customizing in DEV and IDES. The Controlling Method is Multilevel Controlling (Structure Element, Automatic).
    When I'm saving a project with status 'to be transferd', the warning message appeared and I'm failing to assign PS Project automaticlly. But manual assignment works fine.
    Error occurred in accounting - see link controlling cockpit (cProjects)
    Message no. DPR_FIN_GECCO024
    Diagnosis
    Errors occurred when transferring to accounting.
    System Response
    DPR_FIN_GECCO 024
    Procedure
    Choose the Controlling Cockpit (Project Management) link on the Accounting tab page. In the cockpit, you can create a variant with your Project Management project under Selection Variant Orders Project Management. The errors that occurred are then displayed. If no messages are displayed in the controlling cockpit, they have already been processed or deleted. If this is the case, trigger the transfer again.
    No more messages are displayed once the transfer has been carried out successfully (that is, no errors occurred).
    Here is the problem：
    In this Message, I was told to Choose the Controlling Cockpit (Project Management) link on the Accounting tab page. But actually, I can not find the Controlling Cockpit (Project Management) link on the Accounting tab page. It was missing.
    I don't konw what‘s the problem with the missing Controlling Cockpit and how to deal with this warning message getting automatic PS assignment done.
    By the way, I've done IDES test, cProjects and ERP system were integrated on the same system with RFC destination NONE. And that works fine on IDES, so I guess I've done the right customizing in the ERP system( IDES).
    Best Regards，Yemi

    Hi Yemi,
    Controlling cockpit is accessed to view the error details in the accounting integration. This can be accessed through two ways.
    1) In Project-->Accounting tab
    2) Through tcode - COCPCPR
    You can try the second method to view the error details.
    And coming back to your query on project profile config in PS, as Pramod said, by standard SAP delivers a standard profile in SAP PS for cProjects-->PS integration. You can find the same in the below SPRO path.
    Project System-->Structures-->Operative structure-->Work Breakdown structure(WBS)-->Create Project profile
    Project profile name : CPR0001
    This project profile is used when an automatic PS project is created through accounting integration.
    Hope this helps.
    Regards,
    Ravi

  • Web Report Viewer error - Unable to load client print control.

    Dear All,
    We have a problem with Report Viewer print funtionality. Getting the error "Unable to load client print control." on click of Print button.
    We tried all solutions posted in web - nothing resolves the issue.
    The print works fine when we open the report via a browser. But the same is not working through our application. We have the application installed on the Report server itself and the user has Admin previleges.
    Please find below the details
    Report control: ReportViewerWebControl.axd
    Version: 9.0.30729.4402
    SQL server version: SQL Server 2008 R2, 10.50.2500.0 (running on Windows Server 2008 R2 - 64 bit)
    Your help on this would be highly appreciated. Please let me know if you need any specific information.
    Thanks,
    Naga
    Nagaraja

    Hi, Larry,
    Thank you for your answer which remind me and lead me to the resolution. I have struggling on this SQL Server Report Server 2012/Client printing control for
    2 days.
    I just cannot figure out why it kept prompting non-admin XenApp users for SSRS installation. Thanks for your notes again.
    I have 2008 R2 server setup as XenApp server for the publish apps. We published the IE to user to access Web application with SQL 2012 reporting service in
    the backend.
    In the control environment, users do not have permission to install any software. This SSRS has to be installed as administrator under “Install mode” in XenApp
    server.
    Yes, 32bit IE works for me but 64bit IE works too.
    You just need to ensure which version of IE you’re using to install the SSRS. I’m not aware of using 32bit IE for SSRS installation in server but publish 64bit
    IE to client.  That’s my mistake.
    Thanks again. 
    JohnnyW2012

  • Error when opening document with ECL control: INVALID_DATA

    Hi Gurus,
    I've tried to search the net for this problem but could not find anything and I'm stuck now.
    Description:
    we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
    when we try to open this document, time-to-time we get following error:
    Error when opening document with ECL control: INVALID_DATA
    Message no. SDV004
    by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
    what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
    It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
    Thanks,
    David

    Hi Christoph,
    thanks for tip, unfortunately this was already flagged, currently settings are:
    for Display Settings:
    yes - include ECL control
    use HTML control
    empty - maximum viewer wait time
    (do you think that setting some value for this could help)
    yes - deactivate generic object services in viewer
    no - doc display as dialog box
    yes - deactivate data provider cache
    Storage Settings:
    yes - always copy document class from document type
    yes - permit multiple assignment
    Thanks,
    David

  • ERROR Could not create DOM from control.xml

    Hi All,
    I am installaing 4.7EE on Sun Solaris 5.9 SPARC with Oracle and JDK version is 1.4.2_08. When i am running sapinst, sapinst GUI opens and after when i am selecting the Central installtion and i click on Next it giving error message that
    WARNING Could not read file control.xml. Please make sure that you called SAPinst with the correct control file (the control file is given to SAPinst as its first command line parameter or as value of the command line property SAPINST_CONTROL_URL)
    ERROR Could not create DOM from control.xml
    How to solve this error. I have searched in SDN but i am unable to get the solution.
    Mahesh C

    Hi Kiran,
    I have given all permissions to the control file. But these control files are in different places /SAPINST/UNIX/SUNOS_64/PATCOL640/WEBAS630 and ORA, DB2, DB6, IND, INF, ADA in these folders i can c the Control.xml files. But i have given all read write and execute permissions but still its getting the same error. I have downloaded the same IM for 3 times and tried.. But the result is the same.
    Is there any other way of work around for this...
    Thanks
    Mahesh C

  • Server error trying to log onto icloud control panel from pc

    server error trying to log onto icloud control panel from pc

    In your Internet Explorer browser, Click on the "Pages" drop down, then on "Compatibility display" and add icloud.com to the list.
    Actually I had the same initial error this morning even after adding icloud.com to the list as explained yesterday. So I tried  restarting my browser and I was able to log in. I don't get it. Let me know if adding icloud.com to the list works out for you..

  • Vendor evaluation tab not appearing in ML81N

    Hi,
    Vendor evaluation tab not appearing in ML81N.
    Please suggest

    Hello,
    Please maintain vendor evaluation for related purchasing organization. Afterwards, vendor evaluation tab will be appeared in ML81N.
    Thanks.
    Regards,

  • Additional sub criteria for Vendor Evaluation tab in SES (ML81N).

    Hi,
    I like to add two additional sub criteria for Vendor Evaluation tab in SES (ML81N). Based on which vendor evaluation will be calculated.
    1. Safety/Envt Upkeep
    2. Morale
    These two are added in SPRO->Purchasing->Vendor Evaluation ->Define Criteria. But not displayed in ML81N->Vendor Evaluation tab.
    Existing criteria. 1) Quality of Service and  2) Service Timeliness are already available.
    Thanks in advance.
    Chetan Shah

    Hello Chetan,
    have you checked note 79166 "MM-SRV Hint: Vendor evaluation for service"?
    Define an evaluation criterion for services in Customizing of the vendor evaluation to be able to use the vendor evaluation also for the services management.The main criterion must contain the determination methods 'C' (determination from the quality valuation of the service) and 'D' (determination from the timeliness rating of the service) in the sub-criteria.
    Kind Regards
    TomT

  • Change tabbing shortcut for controls

    Is there a way to change the tabbing shortcut to the Enter key, instead of using the Tab key? And is it possible to set the tabbing order for controls?  
    Thanks,
    Chris
    Solved!
    Go to Solution.

    I would advise against it as using the Tab key for navigation has been standardized for a long time.  But you could use the Key Down? filter event in an event stucture to modify a keys behaviour.  Specifically if someone hits the enter key pass 9 to Char and ASCII to VKey.  You could also use this to disable the tab key.

  • "error while evaluating Java script for the package"

    Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.

    Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.

  • Error viewing variables tab after running edit UI

    Hi,
    I have a problem that seems to be somewhat like this:
    http://forums.ni.com/t5/NI-TestStand/Error-viewing-variables-tab-in-Runtime-Operator-Interface/m-p/1...
    The VI I am trying to run is an edit substep of a step type. LabVIEW checks to see if the "Step.Setup.ReadMeasName" property exists, populates a listbox with it if it does. Another listbox with all the available measurement names also appears on the UI. The user has an Add and Remove button to remove measurements from the "ReadMeas" listbox or add them to it from the "MeasNames" listbox. Multiple names can be added/removed at once depending on whats selected when the buttons are pressed. Once "Done" is clicked the VI writes the"ItemNames" property of the "ReadMeas" listbox to "Step.Setup.ReadMeasName", using a Set Property Value node which is passed the TestStand Sequence Context. If the property doesn't exist it creates it.
    The only time I have any problem is when I try to remove items from the property after it is already initialized (i.e. not empty). In other words, if I run the VI from teststand, put several measurement names into "ReadMeas" click done, run the VI again (the names already added appear in the box when the UI comes up, LabVIEW reads "Step.Setup.ReadMeasName" ), and then remove some of the names. IF I had "ThisContext.Step.Setup.ReadMeasNames" opened in the step "Variables" tab when trying to remove the names this message appears in the Variables tab: "One or more errors have occurred. Please Save your work and restart the application." If I make sure not to have "ThisContext" expaded in the variables tab, but check the property before and after removing names from the list it does work properly and there is no error.
    This isn't a big deal becuase I doubt the end-user will be checking to see that the property actually got populated, but I still would like to fix the bug if possible. I've installed the patch for TestStand 2010, and the .Net framwork 4.0. Anyone have any idea what could be going on here?
    Thanks,
    -Josh
    Solved!
    Go to Solution.

    Josh -
    It looks like you're running into a Known Issue 193751, which is documented in the TestStand 2010 and 2010 SP1 Known Issues List. This is an issue that we intend to fix in a future version of TestStand.
    I hope this helps and am sorry for any inconvenience this issue may be causing you.
    Manooch H.
    National Instruments

  • INTERNAL ERROR IN SAP OLE DOCUMENT CONTAINER CONTROL. in transaction PBWW

    Well while running a transaction PBWW when we click on create button it opens the word document with the
    text in it but suddenly the text is gone and it is showing a error which is INTERNAL ERROR IN SAP OLE DOCUMENT CONTAINER CONTROL.
    how can it be resolved????
    Thanks And regards
    Amit

    Friend,
    See this line from OSS#427615:
    Note:
    This note is a continuation of the correction from Note 402195 (Stabilization of the Word interface). Thus, the correction from Note 402195 is an absolutely necessary prerequisite for this note.
    i'm about to sure that if you implement first 402195 than 427615 problem would be solved.
    Both OSS are made in continuation.

  • Tab Order under Control Properties - Display Tab not working

    At present I'm trying to order a couple of Input-Fields and Checkboxes for the Tab-Key. Therefor I tried to use the "Tab Order" Property in the Control Properties - Display Tab - Section: Layout - Tab Order.
    In the SAP Library this property is described that way:
    When user tabs through the controls of the component in runtime, the number indicating what place this control has in the tab order. Note that -1 removes the control from the tab order entirely and 0 indicates that it is highlighted according to its appearance in the component
    Source: [Help.sap|http://help.sap.com/saphelp_nw70/helpdata/en/42/c2ba7f545e3116e10000000a1553f7/frameset.htm]
    The problem now is that VC is completely ignoring this property and just using the tab order in the way the (Input-) fields where created.
    At present I don't see any opportunity to give my "Form view" any logical tab order.
    Is there any workaround? Is it a bug? Is there something I'm doing wrong?
    Thanks for your help in advance.

    Hi,
    It seems that this tab order works only for few of the controls like pushbutton, radio button, checkbox, toggle button...
    i too tried this in my model but it was not working for the input fields of other types.
    regarding -1 -2 ... these values work normally as per their values here -1 -2 order functions just like 2 1.
    hope this helps you.
    Regards,
    Rk.

  • Error in Analyse Tab

    Hi
    I have received following error after analyse tab from db13
    SAPDBA: Error - in analyzing index SAPR3.DSYAD~0
            of table DSYAD!
    30.12.06 09:50     ORA-08100: index is not valid - see trace file for
                       diagnostics
    Please suggest a solution.
    Regards
    Pankaj

    Pankaj
    This Error is very strange error, Have a look on trace file which is generated at user_dump_dest and alert<sid>.log file.
    Reasons may be index might be corrupted or invalidated.Or may be due to block corruption.And there are some bugs on specific platforms for this error.
    Try to drop and recreate index and analyze or better contact customer support with trace file.
    Regards
    Vinod

  • Error formatting Cross-Tab table

    Hello!
    My CR2008 reports include many cross-tab tables and till now, everything went smoothly.
    ...till I got the message "Error formatting Cross-Tab table" while viewing the print preview.
    Technically the error comes up while clicking one of the groups itemized on the left.
    The database hasn't changed. Besides it happened with two different reports associated with two different data bases.
    Any idea ?
    Any help would be appreciated as I've been lost for a while.
    Thib'

    Before I received your answer (thanks a million by the way), I have been installing/un-installing subreports in the main report 'til the 'Error formatting Cross-Tab table' stops.
    The Error stopped occurring when I added a small Group Footer in the subreport : apparently the Error had begun when I had put it to a zero-height.
    Having said that, an hour later and many changes here and there, I have just put a zero-height again and no Error anymore...
    > Check in the main report design tab to see if the width of the subreport fits within the page of the main report.
    > If it doesn't try shrinking the subreport to fit.
    Within 'an hour later and many changes here and there', I did the opposite : I widened a subreport which did not fit in the main report. And the Error isn't raised anymore.
    > What happens if you drill into the subreport?
    You mean if I double-click the subreport to edit it ?
    If that is your question, no Error has ever been raised in the subreport : always in the Preview tab of the Main Report.
    Sorry for describing such an irrational behavior.
    I will categorize my question as answered but if you have any idea, I'd be delighted : I feel like this can happen again and I'd be less under stress to know what detail/ 'parameter' makes CR raise this Error. But your hint about the subreport fitting or not within the main report might be a clue.
    Thank you again
    Thib'

Maybe you are looking for