Error in Event Viewer everytime a email is sent with a attactmant
Hi All,
I'm having a problem with my exchange server every time a email gets sent with a attachment under the size of 20MB it bounces back and when it bounces back I get this in the event viewer,
Cmdlet failed. Cmdlet Get-User, parameters {Identity=NT AUTHORITY\SYSTEM}.
I've checked all the setting and they are as they was set up in the first place nothing has changed.
Hope you get back soon
Regards
Matthew Carney
Regards Matthew Carney
Hi Belinda,
these are emails going outbound, this is the error we get when the email gets bounced back to us -
mx.google.com rejected your message to the following e-mail addresses:
*the email address*
mx.google.com gave this error: This message was blocked because its content presents a potential security issue. Please visit
http://support.google.com/mail/bin/answe r.py?answer=6590 to review our message content and attachment content guidelines. iy12si4764635wic.81 - gsmtp
Your message wasn't delivered because the recipient's e-mail provider rejected it.
Diagnostic information for administrators:
Generating server: ADMINSERVER.adminserv.local
mx.google.com #552-5.7.0 This message was blocked because its content presents a potential 552-5.7.0 security issue. Please visit
http://support.google.com/mail/bin/answe 552-5.7.0 r.py?answer=6590 to review our message content and attachment content 552 5.7.0 guidelines. iy12si4764635wic.81 - gsmtp ##
I am the network admin and the IT manager, this has confused me a bit because all the settings are as they were when I set it up and its only been like this that past month, the logs are full up with errors for this problem.
We can sent attachments internal fine and the fine i tried to sent in the email above was 15MB
Its not just google that we get bounced on its every email going outbound.
Regards Matthew Carney
Similar Messages
-
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Windows is Scanning and repairing drive... (- Errors in Event Viewer)
Long post, please be patient... :)
I have a fairly new (purchased 8/2013) Lenovo ThinkPad T431s with Windows 8.1 Pro 64-bit (updated from 8.0 -> 8.1). It has a very tricky error coming basically 8 / 10 boots:
Windows is Scanning and repairing drive...
Error details from Windows Event Viewer (a new similar error appears on every boot to event viewer):
A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference
number of the file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
What has been done 1st trying to fix that:
SSD disk has been changed (image from previous SSD copied back) ->
no solution, error remains
chkdsk /F /R -> no solution, error remains
SFC /scannow -> no solution, error remains
dism /online /cleanup-image /restorehealth -> no solution, error remains after a few boots
TRIED using Windows 8.1 "Update & Recovery -> Refresh Your PC without affecting your files" -> Inserted the Lenovo "Operating System Recovery Disk Windows 8 Pro (OEM Activation 3.0 Required)" BUT Windows did not accept
that DVD claiming "The media inserted is not valid"... ???
Ended up calling Lenovo Support and they instructed me to order the Recovery DVD from
Lenovorecovery.com -> Unfortunatelly Windows does not recognice the DVD(s)...
mountvol returns:
\\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3}\
(This is my C:\ drive where Windows installation resides)
\\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7}\
*** NO MOUNT POINTS ***
\\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\
*** NO MOUNT POINTS ***
\\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897}\
*** NO MOUNT POINTS ***
Then running fsutil dirty query on each returns:
Volume - \\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3} is NOT Dirty
Volume - \\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7} is NOT Dirty
Volume - \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} is Dirty
Volume - \\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897} is NOT Dirty
The chkdsk on the dirty volume
\\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\ returned:
The type of the file system is NTFS.
Insufficient storage available to create either the shadow copy storage file or
other shadow copy data.
A snapshot error occured while scanning this drive. Run an offline scan and fix.
Diskpart output on the same volume:
DISKPART> lis par
Partition ### Type Size Offset
Partition 1 Reserved 128 MB 17 KB
Partition 2 Recovery 1000 MB 129 MB
Partition 3 System 260 MB 1129 MB
Partition 4 Primary 146 GB 1389 MB
Partition 5 Recovery 350 MB 147 GB
Partition 6 Recovery 19 GB 148 GB
Questions:
1) Are my Partitions OK, haven't "touched" anything?
2) Excluded the dirty volume from boot checking with chkntfs /x
-> still the Error appears in Event viewer log (but Scanning is skipped/not shown anymore during the boot).
What is causing the error?
3) Why do I have three (3) recovery partitions?What has happened in the past days:
A) Lenovo on-site-Support changed the motherboard -> had no impact on the error (which I expected).
B) I found
instructions how to manually create USB Flash stick with a booting Custom (OEM) Recovery Image.
C) Booted with USB and performed "Refresh your PC without affecting your files."
D) Windows was refreshed but...
-->>
Still the error remains (Windows scanning and repairing drive \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} on each and every boot.
1) Related Error in Event viewer (NTFS):
A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference number of the
file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
2) Related Error in Event viewer (NTFS - Microsoft Windows NTFS):
Volume \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5) needs to be taken offline to perform a Full Chkdsk. Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via
PowerShell.
-->>
Now Lenovo support is proposing a full re-install (to be performed by myself) of Windows as this is SW issue.
Summary:
- Refreshing my T431s with OEM Image does not help
- The error remains on \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5; Lenovo Recovery partition) OR at least Windows thinks so... -
Kereros error in event viewer logs.
Hi All,
We have configure Vintella SSO on XI3.1 previously and for some reasons now we have changed to NTLM SSO but still we are observing kerberos error in event viewer logs.
Error1 : Kerberos error was received on log on session , client time and server time etc.
Error 2: Kerberos client received KRB_AP_Error_Modified server host/fully qualified name .THis indicate that password encrypts the kerberos service ticket different than that on target server commonly this is due to identically named machine account in the target realm and the client releams.Please contact your adimistrator.
Please help.
THanks....That's a Microsoft Error coming from a Microsoft log, I can't be sure what's causing it, you need to consult Microsoft.
Usually in their errors the service account that generated it (if by a service account) is one of the details or in the error message. You may need to stop running something with a service account...
Regards,
Tim -
Rapidboot Error in Event Viewer
Folks - I am getting the following persistent error in Event Viewer on my brand new x220:
Faulting application name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
Faulting module name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
Exception code: 0xc0000005
Fault offset: 0x000000000000d248
Faulting process id: 0x35c
Faulting application start time: 0x01cc1678fdbedc11
Faulting application path: C:\Program Files\Lenovo\RapidBoot\HyperW7Svc64.exe
Faulting module path: C:\Program Files\Lenovo\RapidBoot\HyperW7Svc64.exe
Report Id: 41b6ea8b-826c-11e0-af33-f0def15ccf15
Would appreciate any thoughts. Thanks.
Solved!
Go to Solution.I was able to resolve this issue and the PHCORE (Rapidboot driver) error no longer appears upon boot in Event Viewer.
I noticed that when Rapidboot's executable file (HYPERW764) BSOD'ed, both Superfetch and VSS became disabled in the Services - a big no-no. After re-enabling Superfetch and VSS, I was able to successfully uninstall and reinstall Rapidboot.
I believe the root cause may have been one of my antivirus programs (MSE or Malwarebytes), and since uninstalling them and installing ESET, I have had no issues with Rapidboot. -
Hi Friends,
On SharePoint 2010 application server I can see this error on event viewer for every one hour it is repeating. Please look at the screenshot below. I restarted the SharePoint search service 14 and SharePoint foundation search v4. but it is not solved
the issue.
Please look at the error below and help me to fix this issue .
Thanks
valmeekeshwarTry this
https://sharemypoint.wordpress.com/2007/12/18/error-event-id-6398-and-6482-about-security-rights-of-osearch-service/
Stacy www.sharepointpapa.com -
UCCX 7.0 Errors on Event Viewer
Hi Team.
The customer was alerting us about errors that are showing in the Event Viewer UCCX 7.0 server (on Windows).
The errors in Event Viewer are:
Event Type: Error
Event Source: CSAgent
Event Category: Kernel Rule
Event ID: 256
Date: 3/13/2013
Time: 1:22:12 PM
User: N/A
Computer: UCCX02-SS-CRT1
Description:
The process 'C:\Program Files\Java\jre6\bin\jusched.exe' (as user UCCX02-SS-CRT1\Administrator) attempted to initiate a connection as a client on TCP port 80 to 137.254.16.112 using interface Wired\HP NC7782 Gigabit Server Adapter. The operation was denied.
===================================================================================
Event Type: Warning
Event Source: Storage Agents
Event Category: Events
Event ID: 1210
Date: 3/13/2013
Time: 1:17:32 PM
User: N/A
Computer: UCCX02-SS-CRT1
Description:
Drive Array Tape Drive Cleaning Required. The tape drive in Slot 0, SCSI bus 2, SCSI target 5 requires cleaning.
[SNMP TRAP: 3044 in CPQIDA.MIB]
===================================================================================
===================================================================================
Event Type: Error
Event Source: CTIStorageServer
Event Category: None
Event ID: 4
Date: 3/21/2013
Time: 3:20:58 PM
User: N/A
Computer: UCCX01-SS-CRT1
Description:
FCCC2005 Network communication error (TRANSIENT).
===================================================================================
Event Type: Error
Event Source: CTIStorageServer
Event Category: None
Event ID: 4
Date: 3/21/2013
Time: 3:20:58 PM
User: N/A
Computer: UCCX01-SS-CRT1
Description:
FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
===================================================================================
Event Type: Error
Event Source: CTIStorageServer
Event Category: None
Event ID: 4
Date: 3/21/2013
Time: 3:21:08 PM
User: N/A
Computer: UCCX01-SS-CRT1
Description:
FCCC2005 Network communication error (TRANSIENT).
===================================================================================
Event Type: Error
Event Source: CTIStorageServer
Event Category: None
Event ID: 4
Date: 3/21/2013
Time: 3:21:08 PM
User: N/A
Computer: UCCX01-SS-CRT1
Description:
FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
===================================================================================
These last four errors were shown and generated intermittent communication between the telephony server (CallManager) and the IPCC because all active calls were interrupted.
I searched online documentation but can not get anything to tell me the meaning of these errors, their causes and some plan of action.
I appreciate your support to understand why these errors and explain to the customer the cause of these.
Thanks.
Best Regards.
Ernesto GonzalezHi,
1. CSA denying the Java periodical update process from contacting its server. This can be safely ignored (Java is the platform of UCCX but is updated with a UCCX update, updating Java separately is not necessary, and in fact, not recommended. However, Java contains this periodic update check and - as far as I know - it cannot be turned off programmatically).
2. Tape cleaning required - is there a tape drive attached to the server?
3-7. Temporary network communication issue.
G. -
Has anyone had a problem with Draft Emails getting sent with Mac OS 10.8.2? It just happened to me and sent a few drafts out to a potential employer I planned on sending out tomorrow.
Hi, one question & one suggestion...
What possible things are connected at home but not at the store, inlude every cable, etc.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
Hi,while sending email i got this error in Event viewer
The description for Event ID 62 from source SBOMail cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Failed to send the mail message, please make sure that all mail addresses are valid.
The specified resource type cannot be found in the image file
Please help to solve this error.Hi,
Please check this thread:
http://scn.sap.com/thread/3416702
Thanks & Regards,
Nagarajan -
Error in Event viewer - COM Server application security Issue
Dear All,
I am installing one software on windows cluster environment. But while installing I am getting continuous error in System in Event Viewer as 'The application-specific permission settings do not grant Local Activation permission for the COM Server application
with CLSID {xxxxxxxxxxxxx} and APPID {xxxxxxxxxxxxx} to the user NT SERVICE\SQL Server Distributed Replay Client SID (S-1-5-80-3249811479-4343554-65656-65665) from address LocalHost (Using LRPC). The security permission can be modified using the Component
Services administrative tool.'
I have seen in component services, that app ID I am getting for DReplayController service. On security tab if I want to give permission to that particular user then to which user I want to add in 'Launch and Activate permissions'. I am not getting 'SQL Server
Distributed Replay Controller' user in list.
So, please help me.
Thanks in advance.Hi,
Please try to add this account: NT AUTHORITY\SYSTEM.
More information for you:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID 2012
https://social.technet.microsoft.com/forums/systemcenter/en-US/cd8a2c95-70db-4df6-b7f5-eedcc5d898c7/the-applicationspecific-permission-settings-do-not-grant-local-activation-permission-for-the-com
Event ID 10016 issue in SQL Cluster Server
https://social.technet.microsoft.com/Forums/sqlserver/en-US/c5a27692-05c0-4ee4-b97f-1ea438b4e5f7/event-id-10016-issue-in-sql-cluster-server?forum=sqldisasterrecovery
In addition, if there are any further requirements regarding SQL, here are some SQL forums below for you:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
ACPIEC Embedded Controller error in Event Viewer on XP Partition
So, when in my XP (SP2) partittion I recently started to get hangs when I try to put the system to stand by/hybernation at the blue "preparing to go into Stand by..." screen. It just sits there, locks up and I end up having to reboot. In the XP's Event Viewer I see this ACPIEC error and that seems to be related to the BIOS. But, as we know, I am on a Mac so there is no "BIOS".
It says "The embedded controller (EC) hardware didn't respond within the timeout period. This may indicate an error in the EC hardware or firmware, or possibly a poorly designed BIOS which accesses the EC in an unsafe manner. The EC driver will retry the failed transaction if possible."
So, that is the only error I consistently see in the Event Viewer so I assume it is related, but if I am on a Mac and have no "BIOS" or "EC" how can I source this issue out in XP given it is a partition on my Mac?Hi,
Please try to add this account: NT AUTHORITY\SYSTEM.
More information for you:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID 2012
https://social.technet.microsoft.com/forums/systemcenter/en-US/cd8a2c95-70db-4df6-b7f5-eedcc5d898c7/the-applicationspecific-permission-settings-do-not-grant-local-activation-permission-for-the-com
Event ID 10016 issue in SQL Cluster Server
https://social.technet.microsoft.com/Forums/sqlserver/en-US/c5a27692-05c0-4ee4-b97f-1ea438b4e5f7/event-id-10016-issue-in-sql-cluster-server?forum=sqldisasterrecovery
In addition, if there are any further requirements regarding SQL, here are some SQL forums below for you:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
About once a week i get this error message to Windows 7 Event Viewer:
The description for Event ID 0 from source Creative Labs SC cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: 98-63
At the same time i found in my temp folder file named Creative_Audio_Engine_Cleanup.000. I had SB Titanium Sound Card, but i had remove it because it does not work properly. About every 3-8 days souncard lost sounds, analog outputs disppears and spdif went mute. Only way to fix issue was driver re-install, after uninstall and registry cleanup. Creative Customer Support was pretty much helpless, they?send links to latest drivers and blame me mostly.
Does anybody have an idea how to get rid of this error message? I have tried to clean my computer all creative stuff, but this error message still haunts me.Hi,
Please try to add this account: NT AUTHORITY\SYSTEM.
More information for you:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID 2012
https://social.technet.microsoft.com/forums/systemcenter/en-US/cd8a2c95-70db-4df6-b7f5-eedcc5d898c7/the-applicationspecific-permission-settings-do-not-grant-local-activation-permission-for-the-com
Event ID 10016 issue in SQL Cluster Server
https://social.technet.microsoft.com/Forums/sqlserver/en-US/c5a27692-05c0-4ee4-b97f-1ea438b4e5f7/event-id-10016-issue-in-sql-cluster-server?forum=sqldisasterrecovery
In addition, if there are any further requirements regarding SQL, here are some SQL forums below for you:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com -
Hello All,
Seem to be having a problem recently. Whenever I attach any external drive to my Desktop I receive the following error in Even Viewer. I never encrypted any of the drives in question with bitlocker.
Encrypted volume check: Volume information on \\?\Volume{7cc70383-5d6b-11e0-855c-001c25a5a540} cannot be read.
Event ID: 24620
And I cannot access my drive information. At first i thought it may be an issue with one of the drives I have partially encrypted with TrueCrypt but I tried several other unencrypted drives and I receive the same error and I cannot access the
data on my drives.
I tried to access the Bit Locker Recovery tool program (downloaded the VISTA Version since there was no Windows 7 Version that I could find), but it did not allow me to install the recovery tool to attempt some kind of fixing.
The strange thing is that I do not have Windows 7 Ultimate installed (which from what I understand is the only way to have Bitlocker). I have windows 7 professional and I never encrypted my drives with bitlocker, 1 out of the 3 drives is partially
encrypted with TrueCrypt, the other 2 are not encrypted with anything.
The stranger thing is that I can plug the external drives to another laptop and I can access the data fine with no problem or errors. I searched the forum for simliar problems, but did not see any responses with fixes to this issue.
The only thing I can think of is that my Desktop downloaded and installed a bunch of Windows Updates within the last 4-5 days.
heres is the update list
http://farm6.static.flickr.com/5304/5890096650_431b0f3627_b.jpg
Any assistance in attempting to figure this out would be appreciated.Hi,
According to the error message, it should use
BitLocker Repair Tool to fix it, refer:
http://technet.microsoft.com/en-us/library/cc734057(WS.10).aspx
What error message did you receive when you use BitLocker repair Tool?
I notice one drive is encrypted with TrueCrypt, please use that program to unencrypt the drive for test.
If it doesn’t work, since the issue didn’t appear before, you can try to perform a system restore to see the result.
Hope that helps.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
BI 4.1 Multiple Errors on Event Viewer
Hi
My client uses BI Platform 4.1 Support Pack 1 Patch 1. During the past 2 days, there have been several errors logged on the Event Viewer on the BO server. Now, the infoview platform is unresponsive and just hangs for all the users. On having a look at the Services in CMC, the WebI Processing Server status was "STARTING" though nobody had manually tried to stop/start it. So, when I checked the event viewer fr any further errors, there were several repetitive errors which were logged:
1) Log Name: Application
Source: Server Intelligence Agent
Date: 22/07/2014 20:04:44
Task Category: Error
Level: Error
Description:
Server Intelligence Agent: server BO.WebIntelligenceProcessingServer is being recycled.
2) Log Name: Application
Source: BusinessObjects_cms
Date: 23/07/2014 06:29:57
Task Category: Database
Level: Warning
Description:
Database access error. Reason [Microsoft][SQL Server Native Client 10.0][SQL Server]Transaction (Process ID 60) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.. (FWB 00090)
(This warning is recorded multiple times)
3) Log Name: Application
Source: BusinessObjects_cms
Date: 23/07/2014 09:47:38
Task Category: OSCA_Services
Level: Error
Description:
CMS Server Watcher: server named 'W2K8R2_BO.WebIntelligenceProcessingServer' is being marked as down because it is unresponsive
(This error is recorded multiple times within 20 minutes). IT restarted the server and BO is now working fine.
I could not locate any other errors which would give me some more insight to the root cause of these errors. Could someone share some useful posts/links about similar kinds of errors? I tried to search on the forum, and i see suggestions stating that it could be related to network or connectivity. I'm not quite sure though.
Many Thanks
DEThanks Sebastian
We had to restart the SIA and the deadlock issues stopped appearing. For a couple of hours everything was running fine, until we noticed the following errors.
Log Name: Application
Source: Application Error
Date: 23/07/2014 13:04:16
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Description:
Faulting application name: WIReportServer.exe, version: 14.1.1.1072, time stamp: 0x52310a77
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x1b68
Faulting application start time: 0x01cfa65efeb52f5b
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\WIReportServer.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d95bdba2-1269-11e4-x3x3ds-6c3be5befa0c
Log Name: Application
Source: Server Intelligence Agent
Date: 23/07/2014 13:04:22
Event ID: 4096
Task Category: Error
Level: Error
Keywords: Classic
User: N/A
Description:
[Node Name:BO]
[User Name: BO$]
Server Intelligence Agent: server BO.WebIntelligenceProcessingServer stopped unexpectedly.
The WIPS restarted itself. Is there a definite root cause for this issue?
Many thanks
DE
Maybe you are looking for
-
Reinstallation issues with recovery cd on a Satellite A100
I have tried to reinstall OS in my computer. When I run a recovery cd I get a Recovery Utility. I did it and the hard disk drive was formated. But now I have only one partition-disk C and everything is on it. I do not understand what is happened, but
-
HT1657 Can I watch a rented movie (rented in itunes) on my TV using an HDMI cable?
Can I watch a movie rented in iTunes on my TV using an HDMI cable?
-
JDBC/SQLJ Team - Please respond - invalid column type error
Hi, I have posted several messages regarding problems using SQL/J to call out a stored packaged function that returns a ref cursor, but haven't gotten one response. I have yet a new problem with it. JDBC team, please acknowledge! I change the way I o
-
JDeveloper 11g & ADF: supported version of svn server/client question
Hi all, I would like to setup a repository for our dev team, we are coming from jdev 10g with svn server 1.3.2 and tortise svn 1.4.8. After reading through John Stegeman's ADF Development Essentials documents, I noticed this article was published bac
-
One form, multiple unrelated workflows?
Can you have two separaate, unrelated, unlinked processes, both of which use the same form for input? If so, when you submit the form, how would it know which process to execute?