Error in EWT certificate printing
Dear SAP Experts,
I have done J1inchln and j1inbank successfully but I am not able to take the printout of certificate through J1incert.
In J1incert it is giving error "No data selected for printing".
Please tell me know where I am wrong.
Thanks & Regards,
Reva.
Hi,
recently sap was released note no.1046758, this note relating to acknowledgement number in Form 16A as per the 2007 budget changes, but your problem is different, as per old certificate farmat you have to get the form 16A, after checking your configuration, better to post SAP service market place.
If you have missed any notes aply they will assist u, but before post gothrough your configuration.
cin related any query SAP is supporting very good even if its consulting issues also.
regards
sai krishna
Similar Messages
-
TDS Certificate printing Error
hi Experts
i have Run the TDS Cycle but when i am Executing J1INCERT Tcode for Tds certificate printing it showing Error the Error message is no data selected for printing. We are Implimenting sap in 4.6c only
Plz give me the suggestion where i need maintain the data its Urjent.
Thanks in advancePlease check whether certificates for the same are already generated.
U can check the same through table J_1IEWT_CERTIF_N
& WITH_ITEM
Rgds,
Saurabh -
Extended Withholding Tax Certificate Printing
hi,
i configured & checked upto withholding tax in invoice poting & payment posting
now i want to configure the things for certicate printing like number group, number range etc,,,
can any body help me out in sending sequence of configuration document from numger group maintanance to upto certificate printing what are the configurations step to be done
thanks in advance,
prakashplease follow the link, full configuration of EWT are there including number group, number ranges
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/withholding%20tax%20-%20country%20india%20version.pdf -
Withholding tax certificate printing
Dear All,
I have maintained the number ranges for certificate printing.
When i run the j1incert the certificate number is not printing on the certificate.
Please advise.me on how to solve this error.
Regards
KeshavMay be you have seen preview, if you see preview number will not be generated, if you give print out directly then number will be generated.
check and assign points -
TDS Certificate Printing Problem; Message no. TD427
Hello everybody,
While I was running the TDS certificate printing through j1INCERT, I am facing a problem related to the from attached to it, ie J_1IEWT_CERT.
The error is as follows:
"Element CHALLAN_SUMMARY window SMMARY2 is not defined for FORM J_1IEWT_CERT"
Message No. TD427
Diagnosis
A text element was entered which is not defined in the specified Form window.
System Response
The function was ignored
Procedure
Please specify a text element defined in the form window. You can determine the name of the text elements in the form window using the SAPscript form maintenance transaction.
N.B: ours is SAP ECC 5.0 version
Please help me to solve this problem.HI,
Please check in your system if you have the latest .sar file.
1.,,Note 1292837 contains the latest SAR file for Vendor/customer
certificate. Along with that, you will have to apply the note 1318263.
Also please ensure that the code plus the manual changes present in note
1429151 are applied in your system.
To check whether SAP script has the latest format,
>> Got to SE71. Put form name as J_1IEWT_CERT. Select Page Window and
click on display.
>>It will show 19 page windows.
>>MAIN , CHALLAN, CHAL_TCS, DUPNUM, DUPN_TCS,FOOTER,HEADER,HEAD_TCS,
INF1_TCS,INFO1,INFO2,INFO3,NUMBER,NUMB_TCS,TDET_TCS,TITLE ,TITLEDET
,TITL_TCS,VENDPAN.
>>If they have not applied the latest SAR files then CHAL_TCS,
DUPN_TCS, HEAD_TCS, NUMB_TCS and TITL_TCS will not appear and total page
windows will be less than 19.
Remember the fact that the .sar file needs to be applied in each client
OR they need to be copied from client 000.
Reg
Madhu M -
Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal MorciniecSame issue here, looking for more information !
-
TMG Error code 500 Certificate chain was issued by an authority that is not trusted
Hello colleagues
I have site https://site.domain.ru:9510/pmpsvc
In site work: http://imgur.com/2cQ6vlF
I publish this site through TMG 2010, but I have error:
500 Internal Server Error. The certificate chain was issued by an authority that is not trusted (-2146893019).
On TMG server via MMC I imported certificate to:
http://imgur.com/eYqjrQg and reboot TMG server, but problem is not solved.
Maybe someone solved this problem?
Thanks.This is because your certificate is unable to reach CA to verify the certificate
Ensure your TMG can reach the certificate authority
Import Root CA certificate to Trusted Root certificate authority in CertMGR
If you are using intermediate CA then import the intermediate CA certificate to intermediate CA in certmgr
Thanks, but I use certificate "*.domain.ru" and another https sites without port 9510 works fine. Maybe problem with site on TMG because problem with certificate on web-server (about Certificate error) -
http://imgur.com/2cQ6vlF ?? -
Error in smartform when printing multiple pages
Hi,
I m using a smartform which have two pages in it,
i m able to save and activate it without any error message and when i run the function module generated to chk my smartform
it runs fine and diplays two pages i m using.
but as i m attaching this form with my driver program it is giving an error message while running . the error message is " No other output defined in main window."
Please help me out to resolve the issue.Re: error in smartform when printing multiple pages
dharani tadikonda
Thanks for this answer. It is absolutely correct. -
Dr Watson Error while trying to Print report
Hi,
I generated reports using Reports 6.0, however I'm getting Dr Watson error while tring to print the same. Any solutions to get it fixed will be appreciated.
SoumyaHi!
I am facing the same problem.
There is one more finer detail to this. When I print the report
in defualt mode it does not give the error. It is only when I
generate the report in character mode and print it. I get this
error.
I am working on this.
If Any one can help please write back.
Hi,>I generated reports using Reports 6.0, however I'm getting Dr Watson error while tring to print the same. Any solutions to
get it fixed will be appreciated.>Soumya -
Syntax error while trying to print webpages to my Lexmark C544dn printer
Out of the blue I am getting a syntax error when trying to print Safari webpage to my Lexmark C544dn laser printer. It has worked for 5 years until now? The printer works fine printing anything else. Same problem with Firefox.
Try downloading the offline installer [hope this link works|https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=jre-6u18-oth-JPR@CDS-CDS_Developer]
-
With holding tax error FZ379-"Error in WHT certificate numbering"-Thailand
Hi,
We are receiving an error "FZ379 - Error in WHT certificate numbering" while posting an outgoing payment for a vendor in Thailnd.
Here is the business process we follwed:
1. Posted Down payment request on vendor.
2. Paid down payment through F110.
3. Cleared down payment using F-54 and created a credit in vendor.
4. Posted an invoice to vendor.
5. Ran F110 to pay the net amount to the vendor, No errors in payment proposal but when the payment run is carried out it got cancelled with error message FBZ79.
As an alternative, we posted a credit memo replacing the down payment credit and then F110, To our surprise the payment run completed successfully.
Does it make sense to anyboy? Is this issue applies to only Thailand.
Thanks,
Mano.Hello Mano,
I would like to refer you to the following note :-
1090637 Thailand-Withholding tax certificate numbering, RFIDYYWT
which states :-
~~~~~
Solution
For release 470 onwards, certificate number generation at the time of
document posting is not supported by SAP. SAP recommends generating
certificate numbering at the time of reporting.
~~~~~
Can you kindly check the following customizing in IMG (Transaction
SPRO) :-
-> Financial Accounting
-> Financial Accouting Basic Settings
-> Withholding Tax
-> Extended Withholding Tax
-> Calculation
-> Withholding Tax Type
-> Define Withholding Tax Type for Payment Posting
-> Country Key TH
-> Wth.t.type 11
Inside the customizing, there is a tab 'Control Data'. Please select the
checkbox 'No Cert. Numbering'. ie certificate number should not be
generated during payment. It should be generated when you run RFIDYYWT.
hope this helps
Ray
Edited by: Lakshmipathi on Jan 25, 2011 2:53 PM
It is enough if you provide the OSS note number. Dont copy paste the solution since legally it is not allowed -
I have Windows 7 Operating system and an HP 6500 A Plus printer. My iPad no longer prints wirelessly. An error message says the printer is offline. Suggestions?
1. Turn off router, printer and iPad
2. Turn on router and wait 30 seconds
3. Turn on printer and wait 30 seconds
4. Turn on iPad and test printing -
On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?
Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.
-
HP Laserjet 1120 error filter failed when printing
Printer is installed when I plug it in to usb, and erverything seems ok.
Get an error when i try printing "filter failed"
Tried to to add manually the printer and selects it, but an error pops up and says the software has been incorrectly uninstalled and contact the manufacturer.
Mac os x 10.8.2
Has updated everything regarding drivers.
I have searced the communty and tried everything i could try regarding the error Filter failed.
Please advise
ipp://localhost/jobs/1) from localhost
E [20/Feb/2013:15:44:57 +0100] [Job 2] Job stopped due to filter errors; please consult the error_log file for details.
D [20/Feb/2013:15:44:57 +0100] [Job 2] The following messages were recorded from 15:44:49 to 15:44:57
D [20/Feb/2013:15:44:57 +0100] [Job 2] Adding start banner page "none".
D [20/Feb/2013:15:44:57 +0100] [Job 2] Queued on "HP_LaserJet_M1120_MFP" by "hannechristoffersen".
D [20/Feb/2013:15:44:57 +0100] [Job 2] Auto-typing file...
D [20/Feb/2013:15:44:57 +0100] [Job 2] Request file type is application/vnd.cups-banner.
D [20/Feb/2013:15:44:57 +0100] [Job 2] File of type application/vnd.cups-banner queued by "hannechristoffersen".
D [20/Feb/2013:15:44:57 +0100] [Job 2] Adding end banner page "none".
D [20/Feb/2013:15:44:57 +0100] [Job 2] time-at-processing=1361371489
D [20/Feb/2013:15:44:57 +0100] [Job 2] job-sheets=none,none
D [20/Feb/2013:15:44:57 +0100] [Job 2] argv[0]="HP_LaserJet_M1120_MFP"
D [20/Feb/2013:15:44:57 +0100] [Job 2] argv[1]="2"
D [20/Feb/2013:15:44:57 +0100] [Job 2] argv[2]="hannechristoffersen"
D [20/Feb/2013:15:44:57 +0100] [Job 2] argv[3]="testprint"
D [20/Feb/2013:15:44:57 +0100] [Job 2] argv[4]="1"
D [20/Feb/2013:15:44:57 +0100] [Job 2] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=17998 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=A4 pserrorhandler-requested=standard job-uuid=urn:uuid:d712541e-6c3d-32b2-4a17-995e1d9a2c53 job-originating-host-name=localhost time-at-creation=1361371489 time-at-processing=1361371489 PageSize=A4"
D [20/Feb/2013:15:44:57 +0100] [Job 2] argv[6]="/private/var/spool/cups/d00002-001"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[0]="<CFProcessPath>"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[9]="HOME=/private/var/spool/cups/tmp"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[11]="[email protected]"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[12]="SOFTWARE=CUPS/1.6svn"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[14]="USER=root"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[15]="CUPS_MAX_MESSAGE=2047"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[18]="IPP_PORT=631"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[19]="CHARSET=utf-8"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[20]="LANG=da.UTF-8"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[21]="APPLE_LANGUAGE=da"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[22]="PPD=/private/etc/cups/ppd/HP_LaserJet_M1120_MFP.ppd"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[23]="RIP_MAX_CACHE=128m"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[24]="CONTENT_TYPE=application/vnd.cups-banner"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[25]="DEVICE_URI=usb://Hewlett-Packard/HP%20LaserJet%20M1120%20MFP?serial=M F10TRN"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[26]="PRINTER_INFO=HP LaserJet M1120"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[27]="PRINTER_LOCATION=Hannes MacBook Pro"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[28]="PRINTER=HP_LaserJet_M1120_MFP"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[29]="PRINTER_STATE_REASONS=none"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[30]="CUPS_FILETYPE=document"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[31]="FINAL_CONTENT_TYPE=printer/HP_LaserJet_M1120_MFP"
D [20/Feb/2013:15:44:57 +0100] [Job 2] envp[32]="AUTH_I****"
D [20/Feb/2013:15:44:57 +0100] [Job 2] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 379)
D [20/Feb/2013:15:44:57 +0100] [Job 2] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 380)
D [20/Feb/2013:15:44:57 +0100] [Job 2] Started filter /Library/Printers/hp/laserjet/hplaserjetzjs.bundle/Contents/MacOS/rasterToHPZJS (PID 381)
D [20/Feb/2013:15:44:57 +0100] [Job 2] Started backend /usr/libexec/cups/backend/usb (PID 382)
D [20/Feb/2013:15:44:57 +0100] [Job 2] execv failed: Permission denied
D [20/Feb/2013:15:44:57 +0100] [Job 2] PID 381 (/Library/Printers/hp/laserjet/hplaserjetzjs.bundle/Contents/MacOS/rasterToHPZJ S) stopped with status 1.
D [20/Feb/2013:15:44:57 +0100] [Job 2] Hint: Try setting the LogLevel to "debug" to find out more.
D [20/Feb/2013:15:44:57 +0100] [Job 2] usb: AppleLanguages="da"
D [20/Feb/2013:15:44:57 +0100] [Job 2] STATE: +connecting-to-device
D [20/Feb/2013:15:44:57 +0100] [Job 2] Looking for 'Hewlett-Packard HP LaserJet M1120 MFP'
D [20/Feb/2013:15:44:57 +0100] [Job 2] Tilladelser til biblioteket “/System/Library/Printers/Libraries/USBGenericPrintingClass.plugin” er OK (040755/uid=0/gid=0).
D [20/Feb/2013:15:44:57 +0100] [Job 2] load_banner(filename="/private/var/spool/cups/d00002-001")
D [20/Feb/2013:15:44:57 +0100] [Job 2] load_classdriver(/System/Library/Printers/Libraries/USBGenericPrintingClass.plu gin) (kr:0x00000000)
D [20/Feb/2013:15:44:57 +0100] [Job 2] Opening connection
D [20/Feb/2013:15:44:57 +0100] [Job 2] Tilladelser til biblioteket “/System/Library/Printers/Libraries/USBGenericPrintingClass.plugin” er OK (040755/uid=0/gid=0).
D [20/Feb/2013:15:44:57 +0100] [Job 2] load_classdriver(/System/Library/Printers/Libraries/USBGenericPrintingClass.plu gin) (kr:0x00000000)
D [20/Feb/2013:15:44:57 +0100] [Job 2] STATE: -connecting-to-device
D [20/Feb/2013:15:44:57 +0100] [Job 2] Sender data til printer.
D [20/Feb/2013:15:44:57 +0100] [Job 2] Sent 0 bytes...
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: copying to temp print file "/private/var/spool/cups/tmp/0017c512c2b60"
D [20/Feb/2013:15:44:57 +0100] [Job 2] Page = 595x842; 18,14 to 577,828
D [20/Feb/2013:15:44:57 +0100] [Job 2] align for banner 1.
D [20/Feb/2013:15:44:57 +0100] [Job 2] PID 379 (/usr/libexec/cups/filter/cgbannertopdf) exited with no errors.
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: “/private/var/spool/cups/tmp/0017c512c2b60” has 1 pages.
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: opened PPD file "/private/etc/cups/ppd/HP_LaserJet_M1120_MFP.ppd"...
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: size->width = 595, size->length = 842, size->top = 827.6, size->bottom = 14.4, size->left = 18, size->right = 577
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: PreferredRotation = 90
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 595, mediaBox.size.height = 842
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: colorspace = 3, bitsPerColor = 8
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: skipBytesPerRow = 14
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: band width = 4658, bytesPerRow = 4672, band height = 2244, height = 6777
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: context width = 4658, height = 2244, bitsPerComponent = 8, bitsPerPixel = 8, bytesPerRow = 4672, bitmapInfo = 0, resolution = (600.000000, 600.000000)
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: rasterWriteHeader: (null)
D [20/Feb/2013:15:44:57 +0100] [Job 2] cgpdftoraster: bytes written for side 1 = 0
D [20/Feb/2013:15:44:57 +0100] [Job 2] PID 380 (/usr/libexec/cups/filter/cgpdftoraster) exited with no errors.
D [20/Feb/2013:15:44:57 +0100] [Job 2] Waiting for read thread to exit...
D [20/Feb/2013:15:44:57 +0100] [Job 2] Read thread still active, aborting the pending read...
D [20/Feb/2013:15:44:57 +0100] [Job 2] Got USB return aborted during read
D [20/Feb/2013:15:44:57 +0100] [Job 2] PID 382 (/usr/libexec/cups/backend/usb) exited with no errors.
D [20/Feb/2013:15:44:57 +0100] [Job 2] End of messages
D [20/Feb/2013:15:44:57 +0100] [Job 2] printer-state=3(idle)
D [20/Feb/2013:15:44:57 +0100] [Job 2] printer-state-message="Sender data til printer."
D [20/Feb/2013:15:44:57 +0100] [Job 2] printer-state-reasons=none
StefanThanks sig.
I have already tried this one.
It did not help
Whats there to do?
Is it simply to wait it out, or face the reality and buy a new printer?
Regards -
Spool Error - Errors occurred processing this print request
Hi,
I have a problem printing documents through spool.
1. I run a form from Form Builder, execute and select to print from spool
2. In SP02, I select the spool request created and Select Direct Printing.
Spool request Status is changed to error and following is the error log.
I get this for all print requests from spool. When I print these documents directly, I have no problem. I understand there is some problem with the spool server but do not know what it is.
I also observed that when the spool access method is G - I have no problems in printing.
Printer: HP HP laserJet PS (2430)
Host Spool Access Method: L: Print Locally Using LP/LPR.
Device Class: Standard Printer.
SAP NW 2004s SP14
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Message from host spool:
D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9 is currently being printed
End of message
Command used: print /d:
bs107.platinumdb.com\HP01 D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 16151
Request name PBFORM HP01 SMULLAPUDI
Client 800
Owner SMULLAPUDI
Request attributes
Time created 2008050118454600
Remaining life +00007235918
Dispo 1 (Go/Hold) H
Dispo 2 (Keep/Delete) K
Dispo 3 (Indirect/Direct) D
Default output device HP01
Default no. copies 1
Format G_RAW
Main print request characteristics
Spool request number 16151
Print request number 1
Print request attributes
Time created 2008050118471500
Output device HP01
Format G_RAW
Character converter active when first problem occurred
No information available
I am working on this since 4 days with no solution. Kindly help.
Thank you,
Vasu
Edited by: subbu M on May 2, 2008 11:37 PMHi Sri,
Try to setup the printer at OS LEVEL.
then,
If on Windows---use method C.
if not,
use method U and map to your printer queue at OS level.
Hope this resloves this issue.
Reward Pts if useful
Regards,
Malti
Maybe you are looking for
-
Best Practice for SCVMM2012 setup in 3 data centers
We are currently setting up SCVMM for our 2012 Hyper-V clusters. We have 3 data center each with one 2012 Hyper-V two node cluster. The data center are separated by a 10MB up and 50MB down pipe. There are three campuses. We plan to use SQL 2012 to ho
-
20" iMac but things appear small on screen
I'm using a 20" Intel iMac and my display resolution is set at 1680 x 1050. If i reduce the screen resolution things do get bigger, but the text appears blurry. Is there another way of making things bigger? I know Safari allows this in the View menu,
-
Hi CCBU Can you provide the next CCE version supporting UCM 9.1 and timelines? We are currently holding a project due to this. Thanks Isidro
-
From HD error to HD disappearance
I have a 12" G4 PowerBook (DVI) which recently reported an invalid thread count to Disk Utility, which couldn't repair it. I backed up my files and attempted to re-install from the Tiger Install disk. The re-installation seemed to progress well and f
-
Websites don't load...
https://productforums.google.com/forum/#!newtopic/chrome I am having an error with my browsers (FF & Chrome). I keep getting "No Data Received" errors on websites I visit all of the time. This just started after someone ran over and stole our interne