Error in executing scenario File to Idoc

Hi,
I did File to Idoc scenario.
In that I got error in status record at r/3 system...
status record code is 51....Error is <i>Application document not posted</i>
regards,
pavani

Hi Ravi,
i mapped some of the data fields. Control fields i disabled them....
Can you giv me wat are the importent fields for Cremas04...
I did all the field that are indicated in red color..
still i m getting error
Message was edited by:
Pavani Kumari Kokkiragedda

Similar Messages

Error while doing a File to IDOC scenario

Hi Experts,
I have created a File to IDOC scenario where in i have sent a file which has to pass data to ABSEN1 IDOC.I could see the IDOC reaching R/3 ,but with the status 56: "EDI: Partner profile inbound not available"
I have checked with all the configurations and couldnt find where it went wrong.
Kindly help me in this regard.
Thanks.

Hi
Check the inbound parameter and the process code.
To find Process code for IDoc use Tcode WE42.
ALE idoc trouble shooting use
Troubleshooting of ALE Process
look also this configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34

Scenario:file to idoc

dear experts
here my scenario is file to idoc
message is sent successfully from sender but which is not received in receiver i.e,in r/3.
the error which i found id
error category:idoc_adopter
error code:attribute_inv_rcv_serv.
plz any one can help me?????????
regards
somesh

hi
Receiver service cannot be converted into an ALE logical system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
In Business System(R/3) 'Adapter specific identifiers' chooset 'Compare System Landscap Directory' refersh cache and activate objetcs
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

IDX2 Metadata Error Message no.000 File to Idoc senario

Hello Experts,
I am trying to load metadata in IDX2 manually. But it fails and comes out with message Message no.000
I have crossed checked my RFC Destination (SM59) the connection test is successful. The port on IDX1 is created
Similarly the RFC Destination on CRM system is created too. Why is it that my metadata load is giving this message?
Also I created and end to end scenario in XI system for File to Idoc. The file is scheduled in queue for process. The receiver determination has hot started in pipe line process.
To check these when i went to idx2 there is not metadata. hence i tried to load the meta data ... am i searching in right direction?

Yet again like the post in this thread
IDX2 Meta data import fails. I::000 error.
I have been stupid not to check the user on R/3 i spelled the user wrong
Thanks for your support guys

Oracle error while executing VBscript file

I have a Connection.vbs file with following contents:
Dim strCon
strCon = "Driver={Microsoft ODBC for Oracle}; " & _
"CONNECTSTRING=(DESCRIPTION=" & _
"(ADDRESS=(PROTOCOL=TCP)" & _
"(HOST= TRISHUL)(PORT=1525))" & _
"(CONNECT_DATA=(SERVICE_NAME=BTFLVAS))); uid=odb;pwd=odb;"
Dim ocon1:set ocon1=CreateObject("ADODB.Connection")
ocon1.open strCon
Getting this error as a pop up message while executing this file :
Script: D:\Connection.vbs
Line: 10
Char: 1
Error: [Microsoft][ODBC driver for Oracle][Oracle]
Code: 80004005
Source: Microsoft OLE DB Provider for ODBC Drivers
Please help!
Shruti

You are using an ODBC driver to connect to Oracle. The error you get is not an Oracle server error. (so ignore the silly request for an alert log)
The error is from your client Oracle driver. It gets a TNS connection string (or alias) from the ODBC driver. This tells it how to establish a network connection to the Oracle Listener on the Oracle server platform.
The Oracle driver then runs into a problem and says:
12560, 00000, "TNS:protocol adapter error"
// *Cause: A generic protocol adapter error occurred.
// *Action: Check addresses used for proper protocol specification. Before
// reporting this error, look at the error stack and check for lower level
// transport errors. For further details, turn on tracing and reexecute the
// operation. Turn off tracing when the operation is complete.
Basic terms - your Oracle client driver ran into a network error when attempting to make the requested connection.
This could be caused by a number of problems on your PC. Suggest you first check your TNS connection string to make sure it is valid. You can use tnsping (Oracle util in %ORACLE_HOME%\bin), e.g.
C:\> tnsping "DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST= TRISHUL)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=BTFLVAS)))"
See if this works.

Error in executing JSP files

hi there,
I have a problem when a I execute JSP files. This is the message that I encounter everytime I executing JSP files:
" Java System Application Server Execution Note: make sure that the j2ee module or application has been deployed before using execution."
It seems that Application Server can not be started and I don't khow what I must do.
Best Regards.
Zolfaghar

hi friend
u just restart the application or deploy again on server.
i hope u won't get any error.
[email protected]

Class not found error while executing jar file

I have written a java code in which i am connecting to database....when i run the class file using......java class_filename it works........
but when i run the jar file using .......java -jar jar_name ...yi gives me the error as 'Class not found'......
can anybody help me please......
Thanks and Regards,
Siddhesh

that class is part of jar file.....in classpath i have included zip files for jdbc ...to get databse connection.....and the jar being executed ................still it gives the error ClassDefnotfound which i think is due to database connection problem.....the exception is raised while.....
Class.ForName("Driver_name").newInstance();/ This driver is present in zip files that i have added in classpath....
above statement doesn,t giv error while i execute the class file............but exception while executing jar file only..
Thnaks and regards,
siddhesh

Scenario: File To Idoc & Idoc To File

Hi,
Can any body explain file to idoc and idoc to file scenario's with screen shots which incluses setting at R/3 side and XI side. Starting from SLD to ID.
Thanks in advance.
Regards,
Prems.S

Also u can follow the settings on Xi and R/3 side
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.

Error when executing JAR file

I am trying to execute a JAR file, via the command line, when I get the following error:
Exception in thread "main" java.util.zip.ZipException: The system cannot find th
e file specified
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(Unknown Source)
at java.util.jar.JarFile.<init>(Unknown Source)
at java.util.jar.JarFile.<init>(Unknown Source)
Any suggestions?

I am trying to execute a JAR file, via the command
line, when I get the following error:
Any suggestions?How are you trying to execute the file?
some suggestions
create a manifest.mf file with the following content
Main-Class:TheNameOfTheClassWithMainMethod
and hit return
jar this file with any other .class files folders etc like this
java -jar manifest.mf nameUwantToGive.jar *.class
run by double click or by with the following
java -jar nameUwantToGive.jar
Hope this helps
AA

Runtime Error: How to Reprocess File-XI-IDoc scenario

Hi All,
I'm working a file adapter to XI to IDoc scenario. My XI message has about 2,000 records in it and one of those records contains an error (due to an invalid character in a description). My question is in a production environment would it be somehow possible for me to reprocess this erred message and post the remaining 1,999 records that do not have an invalid character? What are my options to progress?

Thanks Bhavesh,
Not sure what additional details you need but I'll give it a go. I've got an input file that contains lets say 100,000 rows of data and each row is a separate record. I use sender file adapter using file content conversion with fixed length definition. I send that through a simple mapping program that will generate 100,000 IDocs. I'll get 50 XI messages each containing 2,000 records (recordsets per message)
Because of an invalid character in the source file (an "escape" character) in SXMB_MONI I get a red flag. The error message is essentially "com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x1b".
Since the XI message errors none of the IDocs for the 2,000 records in that message gets created even though 1,999 of them are OK.
So my question is basically is there a way for me to restart this message via SXMB_MONI (or another way) so the other 1,999 records will process OK leaving me with the error to deal with later?
Thanks again!

Error while executing a JDBC to Idoc scenario : No standard agreement found

Hello SAP PI Gurus,
I am having a JDBC to idoc Scenario .And the interface is running at 10 min of duration.
<SAP:AdditionalText>No standard agreement found for ,
BS_EXT_CTBSREPDB, , BS_ERPQAS_QE1_320, http://XYZ.com/FI/FI_FI_01/Charges, FIDCC2</SAP:AdditionalText>.
While i test the configuration...i get an error in reciever agreement as mentioned above.
Can you pls help me in resolving this issue.
Regards,
Ravi

Hi,
I think the problem is with namespace....for IDOC the namespace will be "urn:sap-com:document:sap:idoc:messages"...but in your case it is different.....i.e http:....etc.....please check whether you 've used the same IDOC withe above mentioned namespace in all the configuration objects like interface determination, receiveragreement etc.....
Thanks
Priyanka

Error in executing SCENARIO in CMD mode

Hi,
I am new to ODI. I am trying to execute a scenario in CMD mode. But, its not exexcuting. The following error is thrown. Any help would be appreciated. I am using ODI 10.1.3.4.0, WinXP SP3.
*\OraHome_1\oracledi\bin>startcmd.bat OdiStartScen "-SCEN_NAME=SALES_ADMIN" "-S*
*CEN_VERSION=001" "-LOG_LEVEL=5"*
A JDK is required to execute Web Services with OracleDI. You are currently using a JRE.
OracleDI: Starting Command OdiStartScen "-SCEN_NAME=SALES_ADMIN" "-SCEN_VERSION=001" "-LOG_LEVEL=5"
java.lang.NullPointerException
at com.sunopsis.dwg.cmd.DwgCommandScenario.k(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenar
io.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.prepare(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.t(e.java)
at com.sunopsis.dwg.cmd.g.E(g.java)
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute
(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.tools.StartScen.main(StartScen.java)
at com.sunopsis.dwg.tools.OdiStartScen.main(OdiStartScen.java)
java.lang.NullPointerException
at com.sunopsis.dwg.cmd.DwgCommandScenario.k(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenar
io.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.prepare(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.t(e.java)
at com.sunopsis.dwg.cmd.g.E(g.java)
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute
(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.tools.StartScen.main(StartScen.java)
at com.sunopsis.dwg.tools.OdiStartScen.main(OdiStartScen.java)

Hi,
Please try this,
startcmd.bat OdiStartScen "-SCEN_NAME=SALES_ADMIN" "-SCEN_VERSION=001" "-LOG_LEVEL=5" "-CONTEXT=GLOBAL"
or
startscen.bat SALES_ADMIN 001 GLOBAL "-v=5"
Also, make sure your odiparam is updated with the connection details like this,
set ODI_SECU_DRIVER=oracle.jdbc.driver.OracleDriver
set ODI_SECU_URL=jdbc:oracle:thin:@localhost:1521:orcl
set ODI_SECU_USER=ODIM
set ODI_SECU_ENCODED_PASS=d1yX,esDEvjoNkC4LYnAO8vy
set ODI_SECU_WORK_REP=WORKREP
set ODI_USER=SUPERVISOR
set ODI_ENCODED_PASS=LELKIELGLJMDLKMGHEHJDBGBGFDGGH
Thanks,
G

Error when executing scenario use command prompt - startscen

Hi All,
Anyone know how to solve this error? I get this error message when I execute command prompt: startscen scenarioName version001 contextDevelopment "-v=2"
The error message is:
java.lang.NullPointerException
at com.sunopsis.g.a.f.b(f.java)
at com.sunopsis.tools.core.SnpsStringTools.a(SnpsStringTools.java)
at com.sunopsis.dwg.DwgObject.snpsDecypher(DwgObject.java)
at com.sunopsis.dwg.DwgJv.treatCmd(DwgJv.java)
at com.sunopsis.dwg.DwgJv.main(DwgJv.java)
at oracle.odi.Agent.main(Agent.java)
I use JDK version 1.4.
Thanks in advance.
Regards,
Sumardi

Hi Sumardi,
Trying to help you,
Please cross check the repository configuration information in ODIPARAM.BAT file.
Thanks,
G

Error while Executing Jar File

i created three java files.
One.java
Two.java
Three.java
after that i comiled three files.
i want to compree these files into a jar file.after that i have to execute the jar file.
for that i created a manifest file called mainClass.txt
step1: javac *.java
stpe2: jar cf example.jar
step3:i created a mainfest called mainClass.txt in that i mentioned name of the class that contains main method .
in the above Three.java having main().
Main-Class:Three
and i saved .(only ons statement in the manifest file)
step 4: I then run the jar utility with the following command
jar cmf mainClass.txt example.jar *.class
but i am getting the following Error.
please help me.
java.io.IOException: invalid header field
at java.util.jar.Attributes.read(Attributes.java:387)
at java.util.jar.Manifest.read(Manifest.java:167)
at java.util.jar.Manifest.<init>(Manifest.java:52)
at sun.tools.jar.Main.run(Main.java:124)
at sun.tools.jar.Main.main(Main.java:904)

hi guys
i created three java files.
One.java
Two.java
Three.java
after that i comiled three files.
i want to compree these files into a jar file.after that i have to execute the jar file.
for that i created a manifest file called mainClass.txt
step1: javac *.java
stpe2: jar cf example.jar
step3:i created a mainfest called mainClass.txt in that i mentioned name of the class that contains main method .
in the above Three.java having main().
Main-Class:Three
and i saved .(only ons statement in the manifest file)
step 4: I then run the jar utility with the following command
jar cmf mainClass.txt example.jar *.class
but i am getting the following Error.
java.io.IOException: invalid header field
at java.util.jar.Attributes.read(Attributes.java:387)
at java.util.jar.Manifest.read(Manifest.java:167)
at java.util.jar.Manifest.<init>(Manifest.java:52)
at sun.tools.jar.Main.run(Main.java:124)
at sun.tools.jar.Main.main(Main.java:904)
Thnks in Advance.

Error in IDOC2File scenario(While Importing IDOC to XI)

Hi everyone,
When i am importing the any IDOC in the Integration directory, i am getting the following error.
<b>+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: The function module "DD_DOMA_GET" not released for 'remote' calls.
Import failed with 1 error
</b>
For this i have activated the DD_DOMA_GET module in SE37 (in my R/3 system).
But still i am getting the same error.
Can anyone provide a solution for this?

confirm on the following;
1. do you have the right authorization?
Authorization IDOC (To import into SWCV/Send Idoc from R3)
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e1000000
0a11405a/content.htm
From Note: 837595
Authorization object S_RFC
Field name RFC_TYPE value FUGR
Field name RFC_NAME value EDIMEXT, SDTX
Field name ACTVT    value 16
Authorization object S_IDOCDEFT
Field name ACTVT   value 03
Field name EDI_CIM value ' '
Field name EDI_DOC value TXTRAW01
Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
Field name ACTVT      value 03
Field name DICBERCLS value
2. is the idoc segments activated, released?

Error in executing scenario File to Idoc

Similar Messages

Maybe you are looking for