Error in Executing Stock Reports in Prod after implementing notes

HI All,
We are getting below errors when we execute Stock Reports in production
EError in BW: VALID_RETIME_ISECT-4-
EError reading the data of InfoProvider ZIM_C113
EError while reading data; navigation is possible
I>> Row: 1785 Inc: RSDRC_NCUM_ROUTINES Prog: RSDRC_NCUM_ROUTINES
We had started implementing below Notes which could have caused the issue. By mistake we had not taken in to consideration the pre and post implementaion of the Notes. Hence we cancelled the transport of the Note in to Production. Post this activity we are getting these errors.
Note 1505587
Notes 1524269 Subsequent correction for Note 1505587and
1564948 Non-cumulatives: Subsequent corrections
to Note 1505587.
Now we have completed implementation of the Notes in Quality Env.
Please can someoone adivce it there could be another other impact of transport this notes to Production. Scenario is that we have done a limited testing of few reports in Quality Env and foresee a risk in transporting to Prod.
Please share if there is any experience on this scenario.
Regards,
Nitin

Thanks Rishi..Whether I need to check in ST02,program buffer for that??How to resolve this issue??
Program buffer                 PXA
abap/buffersize               300000     kB    Size of program buffer
abap/pxa                      shared           Program buffer mode.
This is the current size of our program buffer..

Similar Messages

Button on toolbar after executing the report i.e. after result display

Hi, after executing the report result is being displayed.Now at this stage I want a button on the application toolbar clicking on which will allow a perform to get triggered.
I tried in following manner:
SELECTION-SCREEN: FUNCTION KEY 1.
*INITIALIZATION.
TABLES: SSCRFIELDS.
*MOVE icon_mail TO sscrfields-functxt_01.
*form SEND_EMAIL .
IF sy-ucomm = 'FC01'.
     PERFORM SEND_MAIL_ASSET_STATUS.
ENDIF.
But it's not ok.The above way is not working.
Please note: I want button on toolbar only after executing the report i.e. after result display.
How can I do this?
Kindly guide.
Best regards.

hi
if you are using alv than just pass 3 values to function call
     I_CALLBACK_PROGRAM                = SY-REPID   " program name
     I_CALLBACK_PF_STATUS_SET          = 'STATUS' "PF-STATUS
     I_CALLBACK_USER_COMMAND           = 'UCOMMAND' " subroutine name
and check the value of UCOMM in subroutine

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Error while executing webi report

Hello Experts,
I created a universe using SAP BI query. Now I am using this query to create webi report. so while creating webi report i select 1 characteristics and 1 key figure from the universe and putting them on result objects pane.
After putting these object when I execute the report i get following error:
Database error: SOFA Driver : Catastrophic failure. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
Can anyone suggest me how to resolve this error?
Regards,
Nirav Shah

yes, underlying queries work perfectly fine. Universe are created without any issue. However,in WebI, when I drag the any TWO objects under any class or even combination of one object and one measurement key, as soon as I refresh query, the error pops up. If there is JUST ONE object, no issue at all. I can see the data.
Mean...if there is more than one object in any WebI report, the error is thrown by WebI report. And this happens only while running WebI against SAP BW/BI, query or against any InfoCube.
Thanks

REP-770 Error while executing the report.

Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: <br>REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
Aruna

Hi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet.

Error while executing a report : Time limit exceeded

Hello Experts,
i have executed a report and it took long time and finally throw an error saying that time limit is exceeded ,
please suggest how to resolve the problem
Thanks in Advance
Nitya

Hi Nitya H,
There are many resons behind Time out issue.
It is better to find where exaclty, our report is taking more time.
Below are the some of the bottle necks we need to monitor for time out issue:
1) OLAP query generation time.
2) F4 Search time.
3) Read Cache.
4) Write Cache.
Above features we can monitor @ RSRT transaction.
If OLAP query generation time is taking much time means ,pls regenerate the query @ RSRT.
For F4 search ,keep mater data as data retrival target.
For Read Cache and Write Cache increase the query memory @ RSRT.
Plse check the report and let me know if there is other bottle necks for query execution....
_Note:_ This is just a high level view but we can have many performance drills...like Free char ,complex calculated key fig...etc..
Hope this may helps you...
Cheers,
Maruthi

Error while executing a report from Planning

Hi,
I've got this error message when I execute a report from Hyperion Planning (web) :
"5200: Error executing query. [1106] Error : Class component property name invalid[DataType]"
Can you help me please ?
Thanks.
Virgile.

I am not sure about it. But i remember once running into a similar issue where i made some changes in the metadata or outline and few members were dropped from the hierarchy and it came up with this error at the time of running
the report as my report was still trying to query the dropped members. But u said you have already checked and all your members are valid on the report. Is this happening with all the reports or just one. If its all the reports i would
restart the BI+ reporting services and then try to run the reports!

Error while executing a report

Hi ,
I have a problem while executing a report to brower as ..
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRI2 and form REP_QUELL_MOVE_01-01-
The same query is execting in DEV, but it is not working in QA, it is showing the above message. Can you please send me some idea, how to solve this problem.
In my reporting i am using 2 keyfigures, 2 formulae, 2 time char and 1 char.
Thanks and Regards
Rajesh

Hello,
Open the query in query designer and check the query and see wht detailed error message you get.
Regds,
Shashank

SSRS 2008 R2 rendering error when executing a report

The value '1' is invalid. Valid values are between '0' and '1'. (rrRenderingError)
I am receiving the above error when running the report in SSRS 2008 R2. It has run find in the 2005 version. After research, I read that this issue caused by tablix split on a new page or something. However, I have not found anything to be the resolution. I
installed the latest hotfix that I thought addressed this issue but still not working. Any suggestions outside of touching the report?Sonya

The value '1' is invalid. Valid values are between '0' and '1'. (rrRenderingError)
I am receiving the above error when running the report in SSRS 2008 R2. It has run find in the 2005 version. After research, I read that this issue caused by tablix split on a new page or something. However, I have not found anything to be the resolution. I
installed the latest hotfix that I thought addressed this issue but still not working. Any suggestions outside of touching the report?
Sonya
We too are encountering this problem with reports migrated from 2005 to 2008. We are getting the rendering error only when trying to use the paging controls to navigate forward through the report. This is on SSRS 2008 R2 running SharePoint Integration. When
the result set is empty we get the tablix errors mentioned instead. The reports ran fine prior to migration to SSRS2008.

Error when executing a report in Bex analyzer"

Hi all ,
when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this.
thanks
Rao

Hi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet

SSRS Error while executing the report

Hi,
dataextension!WindowsService_0!7d4!03/09/2015-11:21:04:: e ERROR: Throwing Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: , Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: Failed to execute web request for the specified
URL.
Internal Server Error: The remote server returned an error: (500) Internal Server Error. ---> System.Exception: The remote server returned an error: (500) Internal Server Error.
i can see the above log in reporting services log files, does anyone having the idea about this?
Thanks
Veera
Thanks
Veera

Hi Veera,
According to your description, when you run the report, you get XMLDPException and 500 error.
In your scenario, I would like to know if you are running report in report server or SharePoint site. Does the error only occur when executing this report? Based on my research, the same issue occurs when using SSRS 2008. And the reason the IIS 7 defaults
to Kernel auth mode. So if that is a case, please disable Kernal Auth mode for IIS and registering the SPN on the APPool account.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

TSV_TNEW_PAGE_ALLOC_FAILED error while executing the report

Hi all,
. We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
Now when I provide the key date as 30.06.2011 and Company code =XYZ.
I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
Variables:
1. Key Date: Is a Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from u201C00000000u201D to u201C30.06.2011u201D.
2.Company code: Is a Manual Entry /Default variable.
I also have shot dump.Please find the error analysis of dump below:
The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
ABIX[1]-GTABIX" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 4
Number of rows: 1503307
Allocated rows: 1503307
Newly requested rows: 2048 (in 1 blocks)
can any one help me .......
Regards
Laxman

Hi,
Just check following things
1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
2. See whether any back up process is happening and it has consumed the main memory.
3. Are you getting this error regularly
4. See any transport went and compression/aggregation got removed.
5. Check whether there are many dumps in ST22 same time when you execute report
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
7. Check whether Infoprovifder got removed from BIA
8. Query removed from BIA post transport
9. Run RSRT and regenerate the report.
Thanks and regards
Kiran

Dataset error on CUIC stock reports

Hi,
Am getting "Dataset failed Database Failure" for some of the stocks reports not all reports (getting error for Agent not ready, agent team his all fields, agent SG historical all fields). But the reports which we customized is working fine also the reports which we save as from UCCE folders is giving an error.
The Data Source connectivity is fine
Value list status if fine
We have changed the DB password (its same).
I heard from some of my friends that restarting Intelligence Center Reporting service will fix this issue but I don't see any such things on cisco . Please let me know the steps to bring it back,
Also it would be great if you explain what this Intelligence Center Reporting service responsible for as I don't see any documents related services in CUIC.
Thanks in advance.

The error message shows that the transaction log for tempdb is full. This is an issue on your AW/HDS database, not an issue with CUIC. "tempdb" is a system database used by SQL server.
From your AWHDS system, in SQL Server Management Studio, try this:
Run this SQL query:DBCC SQLPERF('logspace')
If the "Log Space Used (%)" is high on tempdb, you can use the CHECKPOINT command on the tempdb database to clear up some space.
Other options would be to restart SQL Server Service on the AWHDS, or perhaps allocate more space to the tempdb log file.
-Jameson

Error in Executing Stock Reports in Prod after implementing notes

Similar Messages

Maybe you are looking for