Error in executing wilcard query, strange!!!
Select c1.docid from S3TSTPUBG.cmdoccontents c1,S3TSTPUBG.cmdocuments c2 where
(contains(CONTENTDATA, ' ( (%mad% WITHIN searchkeywords ) WITHIN en ) ', 1 ) > 0 )
gives 0 results ....(valid query)
whereas
Select c1.docid from S3TSTPUBG.cmdoccontents c1,S3TSTPUBG.cmdocuments c2 where (contains(CONTENTDATA, ' ( (%m% WITHIN searchkeywords ) WITHIN en ) ', 1 ) > 0 )
gives Intermedia error , wildcard query expansion resulted in........
Any idea ?
Paarently this is in 8.x series only as in 9.x an extra parameter WILDCARD_MAXTERMS has been included
Similar Messages
-
Error while executing BEX query via FM
Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikeshthe key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date -
Error while executing the query
Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit KhannaHi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy -
Serious system error while executing the query: java.lang.OutOfMemoryError
From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
<ns0:field1>1</ns0:field1>
<ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
<ns0:field1>2</ns0:field1>
<ns0:field10>test2</ns0:field10>
</ns0:createTemp>
</ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space -
ORA-27092 Error while executing any query from client
Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM -
Input Value long enough for date format ,Error in executing parallel query
Hi,
My Table: ANML( ID, STATUS,B_DATE,B_MONTH,B_YEAR, DEATH_DATE)
status 1 for alive and 2 for dead.
i wrote a view to get age.
as
create or relace view view1 as
select top."ID",top."STATUS",top."DOB",top."DEATH_DATE",top."ANML_AGE",top."DAYSDIFF",
CASE
WHEN anml_age < 1
THEN 'D'
ELSE 'M'
END age_unit,
CASE
WHEN anml_age < 1
THEN TO_CHAR (daysdiff || ' Day(s)')
WHEN anml_age < 12
THEN TO_CHAR (anml_age || ' Month(s)')
WHEN MOD (anml_age, 12) = 0
THEN TO_CHAR (ROUND (anml_age / 12, 0) || ' Year(s) '
ELSE TO_CHAR ( ROUND (anml_age / 12, 0)
|| ' Year(s) '
|| MOD (anml_age, 12)
|| ' Month(s)'
END age_string
from
(SELECT a.*,
CASE WHEN status IN ( 1)
THEN FLOOR(MONTHS_BETWEEN(TRUNC(SYSDATE),dob))
WHEN death_date IS NOT NULL AND status IN (2)
THEN FLOOR(MONTHS_BETWEEN(death_date,dob))
END anml_age,
CASE WHEN status IN (1)
THEN FLOOR(TRUNC(SYSDATE)-TRUNC(dob))
WHEN death_date IS NOT NULL AND status IN (2)
THEN FLOOR(TRUNC(death_date) - TRUNC(dob))
END daysdiff
from (
SELECTanml.id, status,
TO_DATE ( DECODE (b_date,
NULL, 1,
b_date
|| '-'
|| DECODE (b_month,
NULL, 1,
b_month
|| '-'
|| b_year,
'dd-mm-yyyy'
) DOB,
death_date
FROM anml
WHERE b_year IS NOT NULL
) a) top
when i tried to fetch all values from view its working fine.
But when i tried to fetch values based on condition like as follows,
select * from view1 where anml_age > 20 and anml_age<30
I am getting error like:
Input Value long enough for date format and Error in executing parallel query
Please tell me wht is wrong.Here is your formatted code
create or relace view view1 as
select top."ID",top."STATUS",top."DOB",top."DEATH_DATE",top."ANML_AGE",top."DAYSDIFF",
CASE
WHEN anml_age < 1
THEN 'D'
ELSE 'M'
END age_unit,
CASE
WHEN anml_age < 1
THEN TO_CHAR (daysdiff || ' Day(s)')
WHEN anml_age < 12
THEN TO_CHAR (anml_age || ' Month(s)')
WHEN MOD (anml_age, 12) = 0
THEN TO_CHAR (ROUND (anml_age / 12, 0) || ' Year(s) '
ELSE TO_CHAR ( ROUND (anml_age / 12, 0)
|| ' Year(s) '
|| MOD (anml_age, 12)
|| ' Month(s)'
END age_string
from
(SELECT a.*,
CASE WHEN status IN ( 1)
THEN FLOOR(MONTHS_BETWEEN(TRUNC(SYSDATE),dob))
WHEN death_date IS NOT NULL AND status IN (2)
THEN FLOOR(MONTHS_BETWEEN(death_date,dob))
END anml_age,
CASE WHEN status IN (1)
THEN FLOOR(TRUNC(SYSDATE)-TRUNC(dob))
WHEN death_date IS NOT NULL AND status IN (2)
THEN FLOOR(TRUNC(death_date) - TRUNC(dob))
END daysdiff
from (
SELECTanml.id, status,
TO_DATE ( DECODE (b_date,
NULL, 1,
b_date
|| '-'
|| DECODE (b_month,
NULL, 1,
b_month
|| '-'
|| b_year,
'dd-mm-yyyy'
) DOB,
death_date
FROM anml
WHERE b_year IS NOT NULL
) a) top -
Hi,
While executing a query in portal it is giving internal server error.
In the input screen help, we are searchign using wild card characters.I.e " 141",its giving internal server error,
If we are giving the one value/no value the report is executing correctly.
The input variable is a heirarchy variable. We tried to give it in the heirarchy format also. Still its not working.
Could anybody help on this.
Thanksu might be using "select * from <table name>", instead try this
"select slno as slnod,title as titled.."
http://www.javagalaxy.com -
Error in executing Std query - Incorrect FRANGE row in FORM/DIM?FAC
Hi,
NOTE: We are on BI 7.0 Spport Pack 12 (SAPKW70012)...
When I try to execute a query(one of the standard queries in HR - 0PA_C01_Q021), I got the following error messages:
ABEND: Incorrect FRANGE row in FORM/DIM?FAC for InfoObject 0AGE
ABEND: Incorrect FRANGE row in FORM/DIM?FAC for InfoObject 0ORGUNIT
ABEND: Program error in class SAPMSSY1 method: UNCAUGHT EXCEPTION
I searched the OSS and found a note 1001621 which said apply support package: SAP_BW_VIRTUAL_COMP - Rel 700 - Pkg name SAPK70012NVCBWTECH
But, our basis guys came back with the reply that the solution suggested in OSS note is for SAPKW70011, but our system is already on SAPKW70012. So, this note cannot be applied.
Is there any hidden solution out there? Please respond asap.
ThanksHi Raj and Sunny,
Actually solution is very simple. You have to open this query in Query Designer and redefine the corresponding selection. The problem is that OLAP in BW 7.x is much more strict to query definition than in BW 3.x. Therefore queries from BW 3.x are not accepted quite often. This error is just one example. So try to touch the corresponding selection using hierarchy and save a query once again. For sure this will help. If not, create a message, we will look at the problem directly in your system.
Best regards,
Maxim -
Internal Error while executing a query with varaints in BEX
HI All,
I am executing a query which has 4 variants. when I use the first 3 variants the query is working fine.....but when I try to execute the same query for the 4th variant....the system is giving an error message called Internal Error.....
when I executed the same query with same variant...in RSRT transaction code...I was able to see the results....
The error messages that I am getting as follows...
<Internal Error> receiving from the BW Server Failed. BW server raised exception SYSTEM_FAILURE. DO you want to see more information...
when I selected YES....I got the following message
Error in a ABAP statement when processing an Internal Table.table.
Error Group
RFC_ERROR_SYSTEM_FAILURE
when clicked on the OK button the following message is displayed....
<Internal Error> Can not determine text elements for the current query.
Can any one explain me what went wrong...is there any thing that I need to do in the BEX settings...are there any patches that needs to be installed...or any OSS notes available for this sort of errors...?
Advance in thanks
Dilse...
HashHi Harish,
Execute the query in RSRT and check whether you have any short dump is in ST22. This would give a clear idea at what might have gone wrong.
Another thing is to check whether the code for the variable is fine in the user exit.
Hope this helps.
Bye
Dinesh -
0ADHOC error while executing the query from Report Designer
Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVRHi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine -
Getting error while executing the query in query generator
Hi all
I need to execute on query where I set perameter ''delivery doc date'' but when I execute its giving me error
Please help
Error is :- 1) .[Microsoft][SQLSERVER NATIVE CLINT 10.0][SQL SERVER] MUST SPECIFY TABLE TO SELECT FROM ,2 [Microsoft][SQLSERVER NATIVE CLINT 10.0][SQL SERVER] STATMENT 'BLANKET AGREEMENT'(OOAT) (s) COULD NOT BE PREPARED .HELP
SELECT ELECT T0.[CardName] PartyName, T1.[Dscription] as 'Item description', T0.[NumAtCard] as 'Customer Ref No',
T1.[ShipDate] as 'Del Date', T0.[DocNum] as 'SO No', T0.[DocDate] as 'SO Date', T1.[Quantity],
T1.[Price],T1.[Quantity]*T1.[Price] as 'Line total without tax', ISNULL( T1.[DelivrdQty],0) As DelivrdQty,
ISNULL( T1.[DelivrdQty]*T1.[Price],0) as 'Delivered amount', T1.[OpenQty] as 'pending qty',
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0) as WIP,
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0)*T1.Price as Value
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry join OCRD T3 on t3.CardCode=t0.CardCode
where T1.ShipDate between [%0]and [%1] and t3.groupCode in('115','116') ORDER BY T1.ShipDatehi
you need to use parameters.
try this:
/*select from [dbo].[RDR1] T1*/
DECLARE @FromDate datetime
/*where*/
set @FromDate =/* T2.ShipDate */N'[%0]'
/*select from [dbo].[RDR1] T1*/
DECLARE @ToDate datetime
/*where*/
set @ToDate =/* T2.ShipDate */N'[%0]'
SELECT T0.[CardName] PartyName, T1.[Dscription] as 'Item description', T0.[NumAtCard] as 'Customer Ref No',
T1.[ShipDate] as 'Del Date', T0.[DocNum] as 'SO No', T0.[DocDate] as 'SO Date', T1.[Quantity],
T1.[Price],T1.[Quantity]*T1.[Price] as 'Line total without tax', ISNULL( T1.[DelivrdQty],0) As DelivrdQty,
ISNULL( T1.[DelivrdQty]*T1.[Price],0) as 'Delivered amount', T1.[OpenQty] as 'pending qty'
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0) as WIP,
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0)*T1.Price as Value
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry join OCRD T3 on t3.CardCode=t0.CardCode
where T1.ShipDate between @FromDate and @ToDate and t3.groupCode in('115','116') ORDER BY T1.ShipDate -
Error when executing a query on upgraded system
Hi All,
We are in the process of upgrading our BI system. Currently we are on Quality system and its a copy of existing production system. I have executed a query on the production system (3.5 system) successfully.
But the same query when I'm trying to execute on the upgraded quality system (BI 7.0), I get an error " warning info provider was changed or activated at runtime. The query cannot be opened". The same message doesn't pop up on the current 3.5 BI system.
Can anyone help me how I can correct this error?
regards,
SumanHi All,
I activated the Infoset and I could eliminate the error. Now the issue is solved.
Thanks -
Error when executing a query on master data
Hi Friends,
When I execute a query fon Master Data Characteristic infoObject ( 0BPARTNER ) from BEx Analyzer I got the below error. 0BPARTNER contains 15 attributes. I am getting the below error only for this query. Rest all other queries are working good with the same BEx Analyzer.
<b>An error occured in the communication with the BW Server.
Due to this connection has to be closed.</b>
<b>Detailed Description:
The system is configured incorrectly.</b>
Please tell me what could be the problem? How to overcome this?
Thanks,
SasiHi Arun,
Before the execution of query I did that. And it was ' Query is Correct'.
Any more ideas?
Thanks,
Sasi. -
Error while executing the query in RSRT
Hi to all,
I am executing the query in client development system in RSRT.
Error coming (Query could not open Genun id is invalid)
I shall be thankfull to you for this.
Regards
Pavneet RanaHi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP -
Error while executing the query-VIMP
Dear alll
I am executing the query in production i am getting this below error message
BRAIN 629 Specify a value for variable companycode(single values,entry,mandatory)
BRAIN 629 specify a values for variables Simulkation ID1Individal values,requireed entry)
RSBOL 000 Program error in class SAPMSSY1 Method UNCAUGHT_EXCEPTION
BRAIN 633 varibale contain invalid values
It have been worked untill yesterday
Please suggest me in futhuru its very very imp to deliver the reportsHi,
Try one of these
1. Take of the infoobject from the query definition and see if the query is working.
2. Try saving this Query as another one and try executing it.
REgards
Govind
Maybe you are looking for
-
AVCHD in Ae CS5 is a sad joke.
Ok! AVCHD footage is playing perfectly in Premiere cs5 due to Mercury. But no Mercury in AE C5 makes scrubbing the CTI such a difficult task! And don't think my 8 core workstation is to blame. The strange thing is that RAM preview is reeealy fast!
-
Adding a GeForce 7300 GT to my Mac Pro
I currently run two displays, a 24" Dell and a 30" Apple but want to add a Cintiq 12WX tablet. Hence, I am adding a GeForce 7300 GT video card to my Mac Pro's 7300 existing card to gain an extra connection. (Because my primary usage is for editing im
-
Help needed with Illustrator texture swatches imported into Flash
Hey, so I basically scanned a texture into illustrator and added it into the swatches. After drawing a character in illustrator I used the colour of the swatch I had added to colour in my character and by using the tilde button I could move the text
-
IPhone 4 stuck on loading screen after trying to download iOS 5
All the iTunes updated, then my phone was stuck with just the apple icon and loading bar, which was empty. I tried disconnecting it from my laptop, switching it off etc, now I have switched it back on and it's showing the same thing I only got it yes
-
I want to backup my 4S. Last was in November and I have things since that I don't want to lose (text messages, notes, appointments and contacts). I have tried every. single. thing. apple. suggests. Scoured net looking for other suggestions. They don'