Error in execution of process chains

Hi All,
when i am trying to excute a process chain, i am facing follwoing error:
1) My chains contains a ODS with its infopakage so data is flowing form infopakage to ods and get activated.
2) delete index is executed at cube level. and gets updated through DTP
Here is the errror message its thorughing
"Job BI_PROCESS_DROPINDEX could not be scheduled. Termination with returncode 8"
Please give me useful tips to execute the chain. Points will be awarded for the useful points,.
Thanks a lot
Narendra

Hi,
yes, the user should be set with type 'system'.
Just use the following path:
SU01-> USER(ALE REMOTE)->LOGON DATA->USER TYPE-> SYSTEM.
This user type may not execute or start any batch jobs, irrespective of the user authorizations.
Solution
Set the type of background user to
"Background" up to 4.6B
"System" as of 4.6C
This user type corresponds to the "Communication" type and may also perform background functions

Similar Messages

Email to be sent on execution of Process chain

Hi,
I have a requirement as follows.
On successful execution of process chain an email must be sent to a group of users.
I have made a distribution list using Tcode SO23 and included the message in the last step of process chain. But no messsge is being sent even on successful execution of process chain.
Can anyone throw light on this?
Regards,
Manisha

Hi Manisha,
You can create the Message alert for process chain as follows.
     1. Goto change mode of Process Chain
     2. Right click on the particular Process step/Process chain and choose Create Message.
     3. Choose the Actions (Sucessful / Failure/Always) for which you want to aler the users
     4. Choose the New variant and define the Variant Name and Message header and enter
     5. Create the message and the save the variant and activate the process chain.
Once you triggere the process chain, according the message typr, the users will be alerted.
Regards,
Gowrisankar Nk

Error while running the process chain

Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amit

hi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM

Error while collecting the process chain in a transport request

Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
Pallavi

Hi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas

RFC ERROR while running BI Process Chain

I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
Thanks

This looks like a BW problem. Do you get the same message when you submit it manually in SAP?

Sending an Alert e-mail on execution of process chain containing ATTACHMENT

Hi Experts,
Need your help on the following,
We have a scenario where system must send an e-mail to the recipients, on the exection of a Process in the Process Chain.
This mail should contain a specific text file from SAP-Directory(AL11) as ATTACHMENT or the content of file should be directly read in to the mail, anything will work.

To send an Alert e-mail when the process chain is executed
you need to create a message setting while creating the process chain.
Suppose you want to send a mail after execution of DTP
then just do the following
right click on the DTP process in the chain and you will get a option to create message.
you'll be asked when on what condition you want to send message 1Success 2 error 3always. select as per you r requirement
select that option and a new window will appear
in the new window press Reciepent button and add recipients of the mail as per you requiremnt
press back button and save, then press create message button
here you can enter the text you want to send, other then that message wil send the status and number od records added and transfered , by default.
hope this solves your problem ..:)

Error Messages when Transport Process Chain to Production

I am able to transport three related process chain to Q, but failed in Prodtion. Can anyone look at my error messages? Thank you!
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC
Version 'M' of chain USFCMD was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process TRIGGER START_USLDFORECT_MD in chain USFCMD:
Version 'M' of chain USLDFC was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process TRIGGER START_USLDFORECT in chain USLDFC:
Version 'M' of chain USLDFORECT was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
Results of check for process TRIGGER START_USLDFORECT_TD in chain USLDFORECT:

Try to transport the process chain by removing the process chain from schedule.
Go to Process chain select execution in menu..go for option "Remove from schedule"
It may help you.
Regards,
Srinivas.

Error while Activating a process chain

Hi,
I have just modified the existing process chain with the new info package for loading into ODS and then delta update into the Info Cube.
when i am clicking on the option schedule and activate.
Its giving error as :
"InfoPackage ZPAK_49RJW545FSO2MB3NF1MIZ9NJ9 is
generated; NOT able to be used as loading variant"
This is a IP, which is used for delta update from ODS to cube.
I have checked the IP, its fine like i can do the delta through this pacakge manually.
Please help, points will be rewarded....

Dear himanshu arora ,
Go and check whether the Info Package exist ,
You can check in Rsa1 and give IP name and find it.
If your IP is not there please create it,
If tehre please check the all parameter associated with it.
Also go through these
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Process chain creation - step by step
/people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
Data Load errors and Process chains
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
ope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope it helps
Regards
Bala

Error while creating a process chain

Hello BI Gurus,
I have activated the Business Content Scenario in Plant Maintenance for Infocube 0PM_C08(Measurement Results).
It provides a datasource -> infocube flow,through DSO with transfer and update rules.(3.X scenario)
I have two questions -
1.When I am trying to create a process chain for this scenario for regular delta loads(Loading from the datasource - > DSO - > infocube),
Start - >Execute InfoPackage->Activate DSO Data ->
Then when i insert the Execute Infopackage for the load step from DSO to Infocube in the process chain and check it, it is giving an error saying "InfoPackage ZPAK_D50AJ26831X6L4IIOTZTSXWAE is generated; NOT able to be used as loading variant ".
I got this infopackage by right clicking on the context menu and going to Additional Functions -> Update 3.x data to Data targets.
Why am I getting this error and how to resolve it, bcos when i load it manually it is working fine?
2.If the error is because I did not use a infopack created by me, then how to create a infopack for loading to the infocube from DSO in BI7, because when i select from the Context Menu for creating infopack, it is taking me to the already generated IP ?
Also instead of using the 3.X mechanisms, if I decide to create a DTP, will the transformation created with it automatically map all the rules in the "Update Rules" for all fields?
Waiting for your guidance.
With Warm Regards,
Vineeth
Edited by: VINEETH SUBRAMANIAN.B on Jan 31, 2009 12:11 PM

Hi,
Check in SDN
Problem with process chain
Re: Updating Data from ODS to IC using Process chains
Indirect Spend Analysis
Thanks
Reddy

Error while copying a process chain.

Hi All,
I get an error message while copying the process chain in Production environment.It says "SAP System has status 'not modifiable'".Choose display object or Cancel.I hope this is because of the config. that there is no option to create anything .
Please confirm.
Regards,
Shailja.

Hi Shailja,
That means that you can not change that type of object on Quality or Productive server.
Go to Administrator Workbench, sub menu Transport Connection, there you will find a button called Object Changeability (with a truck). Click on that and change the types of the concerned objects to 'Every changeable' in your case.
Beware that you must change the status not with a double click but with a right click
also refer the following thread you can find your solution
Error message after process chain transport
Hope this helps
Regards
Karthik
<3rd Reminder for points removed>
Message was edited by:
Moderator

Error on step in process chain

Hello All,
I have just scheduled a process chain immediately and it is running. One step (A full update) has gone red with error "Object requested is currently locked by user DCKIBUUK" - DCKIBUUK is my username. 11 out of 26 Data Packages have processesed OK. Data Package number 12 is where the error occured. Please advise on what to do.
Thank you and kind regards,
Keith

The first thing is to unlock the node of the process chain which has been locked by you. So you need to come out of the infopackage in question.
Now, right-click on the node that failed and use the "Repeat" option. If the repeat does not exist , you have 2 options :
1. manually run the remaining steps
2. Manually make the system believe that the failed node went in successfully by forcing the status of the step to "G".
Hope this helps .

Syntax error when executing a process chain.

Hi gurus,
This is a weird problem that we have been facing since yesterday. In the transaction RSPC, we had created a process chain in Feb 09. It ran smoothly till yesterday. However when I try to schedule the process chain now, it gives me a dump stating Syntax error in program "CL_RSDMD_IOBJ_U_TPL===========CP ".
This same dump is generated whenever I try to display variant of one of the nodes of Process Chain.
I tried checking the corresponding programs but in vain. I have no Idea why am I receiving the error.
If anyone has faced this problem please post the same.
The following is brief overview of the dump.
Information on where terminated Termination occurred in the ABAP program
"CL_RSBK_DTP_DATABASE==========CP" - in "COPY_FROM_DB". The main program was
"RSPC_MAINTAIN ".
In the source code you have the termination point in line 166
of the (Include) program "CL_RSBK_DTP_DATABASE==========CM003".
Any help would be appreciated.
Regards,
Sree.

Hi Rayapa,
There is no Long text as such, however, there is a short text which I have mentioned in my question itself.
And there is a What Happened
which is as follows
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSDMD_IOBJ_U_TPL===========CP " in include
"CL_RSDMD_IOBJ_U_TPL===========CM00E " in
line 4:
"Field "P_BOOKMODE" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
The include has been created and last changed by:
Created by: "SAP"
Last changed by: "<My SAP user>"
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
thnkz n regards,
Sree.
Edited by: Sree Nair on Apr 3, 2009 12:10 PM

Error while designing the Process Chains

Hi All,
I have a issue on Process Chains.
In my Project there are 2 ODS.
ODS 1 : Status Header ODS (ZODS)
ODS 2 : Service Order Header. (0CRM_PROH)
In CRM, if any Service Order is created, it is available in delta Queue(RSA7) immediately.
While loading the data to ODS 2(Service Order),it is checking the data from status ODS 1(Status ODS)
For Example, I am loading the data of service Order 80001 to ODS 2(0CRM_PROH). Before loading to ODS 2, i am checking whether this service Order Number(80001) is available in ODS 1.
If the service Order 80001 is there in ODS 1, it will update the data to ODS 2.
If the service order 80001 is not there in ODS 1, it will not Update the data to ODS 2.
Problem i am facing :
1. First i am loading the data to ODS 1 (Status ODS). Early Morning 2.30AM and it completes the data load at 2.40AM. And document posting is happening on 2.37AM and ODS 1 doesnt pull the data of document posted.
2. Once the ODS 1 is completed, by 2.41AM, the data loading will happen for ODS 2 (Service Order Header).It brings all the data including the document posted on 2.37AM.
3.While loading all the data is available, and while loading to ODS 2, it is checking the status ODS. And it is checking for the document posted on 2.37AM and this document is not there in Status ODS 1 and the data(posted on 2.37AM) will not update in ODS 2.
Because of this, some records are missing in ODS 2. And while loading, we cant stop the document posting also.
How can i achieve this using the process Chain.
Design i have tried in Process Chain :
1. Start Variant.
2. Load Infopackage to PSA only for ODS 2.
3. Load Infopackage to PSA and activate ODS for ODS 1 (Status ODS)
4. Read PSA (of ODS 2) to Load data to ODS 2.
5. Activate the ODS.
I tried, but i got a error message while designing the process Chains.
No type "Activate DataStore Object Data" process can be in front of process "Read PSA and Update Data Target" variable PSA_SERVICE_ORDER in the chain
Pls suggest how to recify this according to my design.
Thanks & Regards,
Ram.

Hi,
You can try this..
.......................................... Start ...................................................
Load data to PSA (ODS 2) ..................................... Load data to PSA (ODS 1)
..................................................................................Load data to ODS 1
...................................................................................Activate ODS 1
........................................... AND ..........................................................
........................................ Load data to ODS 2 .............................................
.......................................... Activate ODS 2 ...........................................
Regards,
Anup.
Edited by: Anup ShankarBS on Sep 3, 2009 4:56 PM

Error when scheduling the Process Chain

Hi Everybody,
I have created a process chain and executed in background then job in SM37 says it is canceled but when i check the logs in SM37 it gives"ERROR READING JOB LOG" at the status bar. Any suggestions
Thanks
Raju

Dear Raju,
Have you checked SM21? Maybe you have a problem with your TemSe object. If this is the case a basis guy should know how to handle it.
Greetings,
Stefan

Runtime error during opening a process chain in rspcm

Hello,
i created a process chain just a simple one which loads Data from the DataSource into a DSO and then into a InfoCube.
I executed this processchain without activiating my Initial-Request in the DSO.
So i got a hanging Request there, i deleted all Requests from all objects in this processchain. Still had this hanging Request, so i deleted this one Request from the RSEQDONE. Now my processchain is working, but it takes very long to open it when i am in the RSPCM or i even get a runtime error.
Any suggestions?

Regarding RSPCM you better to check the oss notes which are shared by Michael devine.
Coming to your issue, if you have loading huge data then better to increase your wait time of your info pack load.
go to your info pack --> menu scheduler-->Time out time, increase as you need.
if your doing full loads, please use proper selections and split your load as small chunks.
increase packet sizes and parallel settings to speed up your load.

Error in execution of process chains

Similar Messages

Maybe you are looking for