Error in extracting data through function module

Hi All
         Need  ur help .I am extracting data from crm thru function module.I have copied RSAX_BIW_GET_DATA_SIMPLE and modified it by using code.I am getting an error while testing extraction
Structure I have created ztest_01
Data Source :zmgc_ds1.
There 3 crm tables from where data is picked crmd_orderadm_h,crmd_customer_h,crmd_order_index.
I am attaching the code,can any body help me in correctring the error.Tell me if tthe placing of the code in the template is correct.please give details.
Error which I got:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
  not caught in
procedure "RSA3_GET_DATA_SIMPLE" "(FUNCTION)", nor was it propagated by a
  RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLRSA3" contains the CALL FUNCTION statement.
The name of the function module to be called is "ZRSAX_BIW_GET_DATA_SIMPLE_01"
but "ZRSAX_BIW_GET_DATA_SIMPLE_01" cannot be found in its function group.
Possible reasons:
a) The function module "ZRSAX_BIW_GET_DATA_SIMPLE_01" has not been activated.
  Therefore,
    it cannot be found at runtime.
b) The Function Library contains an incorrect entry for
  "ZRSAX_BIW_GET_DATA_SIMPLE_01".
c) The function module contains no code, even FUNCTION ... ENDFUNCTION
    is missing.
You help would be appreciated.
Don't worry about points,.

Did you create your function module without problems...assigned the Z* function group? activate the function module? i assume that you copy the function module code and the variables definition on TOP include of RSAX_BIW_GET_DATA_SIMPLE
Regards
Message was edited by:
        Oscar Díaz

Similar Messages

  • Error while extracting data using function module

    Hello,
    I created one generic datasource and i want to extract data with the option "Extraction by Function Module".
    But when i specified function module name and was trying to save, it thrown a error message saying
    'The specified table does not exist'.
    What could be the reason?
    Please help me out.
    Thanks,
    Regards,
    Steve

    Hi Steve,
       Once you execute T.Code RSO2, you need to fill in the details and click Create, specify the Appl. Component and in Extraction by Function Module, give Function Module name and Extrct Structure in the given boxes.
    "This structure is used by a DataSource that was created using the transaction RSO2 (generic extraction) and selects data using a function module.
    The data must be transferred from this function module to an interface table E_T_DATA."
    I'll try to comeup with small piece of code to sort your issue.
    Hope it helps!!!!
    Amit

  • URGENT : Error: Please create data processing function module

    Hi
    I am getting the folloiwng error
    "Please create data processing function module" in table maintainence.
    It is working fine in dev environment but not in QA and production.
    Pleae help.
    Regards
    Kalpesh

    Hi Kalpesh,
       I see it is something to do with the naming convention used in the quality and production system. These must have been setup differently compared to ur development system. So check with different naming conventions.
    Reward points if helpful.
    Cheers
    Shafiq

  • Error : J_2IRG1BAL, Create data processing Function module

    Sap Experts,
    when i go to se11 in which have given table name: J_2IRG1BAL, than i gone menu bar click on utilities select the table contents
    click on create entries button.
    1) Error Message : Create data processing function module
    2) This table Relevant to RG1 Updation
    3) Due to this error I am not able to upload the opening stock of finished material manuaaly
    4) What are the actions need to be done to rectify the above error.
    Regards,
    Prabhakar

    Hi
    Ask your ABAPER to create the maintainence view of the table
    regards
    Sanil Bhandari

  • Binding Data through function module in adobe to display charts

    Hello Gurus,
    This is the requirement :-
    Through function module output i have to display the chart.
    For ex:-In sales order transaction there is a field called status.For every order there is status (open, complete, inprocess). Display the chart based on the order status that how many open, complete and inprocess are there.
    Thanks,
    Karan

    post Adobe related questions to RIA forum at
    User Interface Technology

  • Delta extraction(date) with Function module problem

    Hi All,
    FUNCTION zrsax_biw_get_data_pr_d.
    *"*"Local Interface:
    *"  IMPORTING
    *"     VALUE(I_REQUNR) TYPE  SBIWA_S_INTERFACE-REQUNR
    *"     VALUE(I_ISOURCE) TYPE  SBIWA_S_INTERFACE-ISOURCE OPTIONAL
    *"     VALUE(I_MAXSIZE) TYPE  SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
    *"     VALUE(I_INITFLAG) TYPE  SBIWA_S_INTERFACE-INITFLAG OPTIONAL
    *"     VALUE(I_UPDMODE) TYPE  SBIWA_S_INTERFACE-UPDMODE OPTIONAL
    *"     VALUE(I_DATAPAKID) TYPE  SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
    *"     VALUE(I_PRIVATE_MODE) OPTIONAL
    *"     VALUE(I_CALLMODE) LIKE  ROARCHD200-CALLMODE OPTIONAL
    *"     VALUE(I_REMOTE_CALL) TYPE  SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
    *"  TABLES
    *"      I_T_SELECT TYPE  SBIWA_T_SELECT OPTIONAL
    *"      I_T_FIELDS TYPE  SBIWA_T_FIELDS OPTIONAL
    *"      E_T_DATA STRUCTURE  ZPR_ST OPTIONAL
    *"  EXCEPTIONS
    *"      NO_MORE_DATA
    *"      ERROR_PASSED_TO_MESS_HANDLER
    * The input parameter I_DATAPAKID is not supported yet !
    * Example: InfoSource containing TADIR objects
    *  TABLES: tadir.
    *DATA: BEGIN OF zpr_st_copy,
    *        banfn TYPE zpr_st-banfn,
    *        bnfpo TYPE zpr_st-bnfpo,
    *        zebkn TYPE zpr_st-zebkn,
    *        knttp TYPE zpr_st-knttp,
    *        vbeln TYPE zpr_st-vbeln,
    *        ps_psp_pnr TYPE zpr_st-ps_psp_pnr,
    *        gsber TYPE zpr_st-gsber,
    *        werks TYPE zpr_st-werks,
    *        statu TYPE zpr_st-statu,
    *        ekgrp TYPE zpr_st-ekgrp,
    *        menge TYPE zpr_st-menge,
    *        frgdt TYPE zpr_st-frgdt,
    *        meins TYPE zpr_st-meins,
    *         loekz TYPE zpr_st-loekz,
    *      END OF zpr_st_copy.
    * Auxiliary Selection criteria structure
      DATA: l_s_select TYPE sbiwa_s_select.
    * Maximum number of lines for DB table
      STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize.
    * Select ranges
    *  RANGES: l_r_pgmid  FOR tadir-pgmid,
    *          l_r_object FOR tadir-object,
        RANGES: PRNO for zpr_st-banfn,
                DATE1 FOR zpr_st-frgdt.
    * Parameter I_PRIVATE_MODE:
    * Some applications might want to use this function module for other
    * purposes as well (e.g. data supply for OLTP reporting tools). If the
    * processing logic has to be different in this case, use the optional
    * parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
    * between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
    * (I_PRIVATE_MODE = X).
    * If the message handling has to be different as well, define Your own
    * messaging macro which interprets parameter I_PRIVATE_MODE. When
    * called by BIW, it should use the LOG_WRITE macro, otherwise do what
    * You want.
    * Initialization mode (first call by SAPI) or data transfer mode
    * (following calls) ?
      IF i_initflag = sbiwa_c_flag_on.
    * Initialization: check input parameters
    *                 buffer input parameters
    *                 prepare data selection
    * The input parameter I_DATAPAKID is not supported yet !
    * Invalid second initialization call -> error exit
        IF NOT g_flag_interface_initialized IS INITIAL.
          IF 1 = 2. MESSAGE e008(r3). ENDIF.
          log_write 'E'                    "message type
                    'R3'                   "message class
                    '008'                  "message number
                    ' '                    "message variable 1
                    ' '.                   "message variable 2
          RAISE error_passed_to_mess_handler.
        ENDIF.
    * Check InfoSource validity
        CASE i_isource.
          WHEN 'ZPR_ST_DS_D' OR ''.
          WHEN OTHERS.
            IF 1 = 2. MESSAGE e009(r3). ENDIF.
            log_write 'E'                  "message type
                      'R3'                 "message class
                      '009'                "message number
                      i_isource            "message variable 1
                      ' '.                 "message variable 2
            RAISE error_passed_to_mess_handler.
        ENDCASE.
    * Check for supported update mode
        CASE i_updmode.
          WHEN 'F' OR ''.
          WHEN 'C'.
          WHEN 'R'.
          WHEN 'S'. " DELTA INITIALIZATION
          WHEN 'I'. "DELTA INITIALIZATION FOR NON CUMULATIVE
          WHEN 'D'. "DELTA
          WHEN OTHERS.
            IF 1 = 2. MESSAGE e011(r3). ENDIF.
            log_write 'E'                  "message type
                      'R3'                 "message class
                      '011'                "message number
                      i_updmode            "message variable 1
                      ' '.                 "message variable 2
            RAISE error_passed_to_mess_handler.
        ENDCASE.
    BREAK-POINT.
    * Check for obligatory selection criteria
    *    READ TABLE i_t_select INTO l_s_select WITH KEY fieldnm = 'ZPR_ST-FRGDT'.
    *    IF sy-subrc <> 0.
    *      IF 1 = 2. MESSAGE e010(r3). ENDIF.
    *      log_write 'E'                    "message type
    *                'R3'                   "message class
    *                '010'                  "message number
    *                'PGMID'                "message variable 1
    *                ' '.                   "message variable 2
    *      RAISE error_passed_to_mess_handler.
    *    ENDIF.
        APPEND LINES OF i_t_select TO g_t_select.
    * Fill parameter buffer for data extraction calls
        g_s_interface-requnr    = i_requnr.
        g_s_interface-isource   = i_isource.
        g_s_interface-maxsize   = i_maxsize.
        g_s_interface-initflag  = i_initflag.
        g_s_interface-updmode   = i_updmode.
        g_s_interface-datapakid = i_datapakid.
        g_flag_interface_initialized = sbiwa_c_flag_on.
    * Fill field list table for an optimized select statement
    * (in case that there is no 1:1 relation between InfoSource fields
    * and database table fields this may be far from beeing trivial)
        APPEND LINES OF i_t_fields TO g_t_segfields.
    *   Start tracing of extraction
    *    bice_trace_open g_r_tracer i_t_fields.
      ELSE.                 "Initialization mode or data extraction ?
    * Data transfer: First Call      OPEN CURSOR + FETCH
    *                Following Calls FETCH only
    * First data package -> OPEN CURSOR
        IF g_counter_datapakid = 0.
    * Fill range tables for fixed InfoSources. In the case of generated
    * InfoSources, the usage of a dynamical SELECT statement might be
    * more reasonable. BIW will only pass down simple selection criteria
    * of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
    *      LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'PGMID'.
    *        MOVE-CORRESPONDING l_s_select TO l_r_pgmid.
    *        APPEND l_r_pgmid.
    *      ENDLOOP.
    *      LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'OBJECT'.
    *        MOVE-CORRESPONDING l_s_select TO l_r_object.
    *        APPEND l_r_object.
    *      ENDLOOP.
    LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'ZPR_ST-FRGDT'.
                MOVE-CORRESPONDING l_s_select to DATE1.
                DATE1-sign = 'I'.
                DATE1-option = 'GE'.
                clear DATE1-high.
                APPEND DATE1.
          ENDLOOP.
    * Determine number of database records to be read per FETCH statement
    * from input parameter I_MAXSIZE. If there is a one to one relation
    * between InfoSource table lines and database entries, this is trivial.
    * In other cases, it may be impossible and some estimated value has to
    * be determined.
          l_maxsize = g_s_interface-maxsize.
          OPEN CURSOR WITH HOLD g_cursor FOR
    *      SELECT (g_t_fields) FROM tadir
    *                               WHERE pgmid  IN l_r_pgmid AND
    *                                     object IN l_r_object.    "#EC CI_GENBUFF
    *@ CODE FOR THE STRUCTURE TO FILL IN FROM EBAN AND EBKN@*
                SELECT a~banfn a~bnfpo k~zebkn a~knttp k~vbeln k~ps_psp_pnr k~gsber a~werks a~statu a~ekgrp a~menge a~menge a~frgdt a~meins
    * INTO CORRESPONDING FIELDS OF TABLE IT1
                FROM  eban AS a INNER JOIN ebkn AS k ON ( a~banfn = k~banfn AND a~bnfpo = k~bnfpo )
                WHERE a~banfn GE '2000000000' AND a~banfn LE '2999999999' and a~loekz eq ' ' and a~frgdt ge '20130401' and a~FRGKZ eq '2'.
    *BREAK-POINT.
        ENDIF.                             "First data package ?
    * Fetch records into interface table. There are two different options:
    * - fixed interface table structure for fixed InfoSources have to be
    *   named E_T_'Name of assigned source structure in table ROIS'.
    * - for generating applications like LIS and CO-PA, the generic table
    *   E_T_DATA has to be used.
    * Only one of these interface types should be implemented in one API !
        FETCH NEXT CURSOR g_cursor
                   APPENDING CORRESPONDING FIELDS
                   OF TABLE e_t_DATA
                   PACKAGE SIZE l_maxsize.
        IF sy-subrc <> 0.
          CLOSE CURSOR g_cursor.
    *      bice_trace_close g_r_tracer.
          RAISE no_more_data.
        ENDIF.
    *    bice_collect_table g_r_tracer e_t_data.
        g_counter_datapakid = g_counter_datapakid + 1.
      ENDIF.              "Initialization mode or data extraction ?
    ENDFUNCTION.
    in the above I_t_fields and I_T_select structures  are not getting data .....
    can any one pleasee let me know what mistake i hvae done with my code?
    and i m unbale to change data source value to F1 if i am trying to change my function module and extract structure are disappearing....
    i m not getting why it is happening .......
    thank you
    vijay

    Hi yasemin,
       I m bit confused here with the line below
                                     IF i_initflag = sbiwa_c_flag_on.(if we pass 'X' then it will enter loop and checks for F or D and then assigns values to I_T_SELECT and I_T_Fields structure)
          accordfing to my code i feel it will work for any one not both(F or D).
    one more doubt rsax_biw_get_data extraction method is F2 few of them are asking to change to F1.
    so tried running a code then in RSO2 extact structure and FM both dissapeared i did not get why it happened ?
    can you please let me know why it happend
    thanks
    vijay

  • Error in Extracting Using Generic-Function Module

    Hi All,
    I have Created a function module and tried extracting data.
    But its giving Error that "<b>The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject</b> "
    Please Help.

    Hi,
    check out the statement
        CASE I_DSOURCE.
          WHEN ......
    may be you are checking another datasource name.
    regards
    Siggi

  • Error  while reading data using Function Module /sapapo/msdp_data_read

    In my report, function module /sapapo/msdp_data_read  is called to get the data from a planning area.
    The problem is that, the values returned by this FM are not correct.means its returning wrong Key_figure values.
    On checking it was observed that , in the import parameter is_read_options ,
    the field flg_aggregate = 'X'.
    In Debug mode i cleared this field and called the FM and it returned the correct values.
    Can anybody plz tell me what is the relevance of this field flg_aggregate .
    Kindly guide.
    Thnk you in advance.
    Regards ,
    Pranali

    Dear Pranali,
    FLG_AGGREGATE has following importance:
    if FLG_AGGREGATE = 'X' and the table ct_cols is empty then key figures for the time period defined through IS_PERIOD will be red aggrerated.
    I hope this helps.
    Regards,
    Tibor

  • Extracting data through fn module to smartforms

    i am writing a select statement to extract the data from a table and that table i have to export to the smart form

    See the following ex:
    REPORT  zfi_credit_note  MESSAGE-ID       00.
    *--- Table declaration
    TABLES: bseg,
            t001,
            bkpf.
    TYPES: BEGIN OF TY_DOC.
            INCLUDE STRUCTURE ZFI_CREDIT_NOTE.
    TYPES: END OF TY_DOC.
    *--- Data declaration
    DATA: t_ssfcrescl TYPE ssfcrescl,
          t_ssfctrlop TYPE ssfctrlop,
          g_subrc     LIKE sy-subrc,
          fname       TYPE rs38l_fnam.
    DATA: IT_DOC TYPE STANDARD TABLE OF TY_DOC WITH HEADER LINE.
    SELECTION-SCREEN
    SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: p_bukrs LIKE bkpf-bukrs OBLIGATORY.
    SELECT-OPTIONS: S_belnr FOR bkpf-belnr OBLIGATORY MATCHCODE OBJECT fmcj_fi_reference_debi.
    PARAMETERS: p_gjahr LIKE bkpf-gjahr OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b1.
    AT SELECTION-SCREEN
    Validate Company code
    AT SELECTION-SCREEN ON p_bukrs.
      SELECT SINGLE * FROM t001 INTO t001
              WHERE bukrs EQ p_bukrs.
      IF sy-subrc NE 0.
        MESSAGE e368 WITH text-003.
      ENDIF.
    Validate Document number
    AT SELECTION-SCREEN ON S_belnr.
      SELECT SINGLE * FROM BKPF INTO BKPF
              WHERE bukrs EQ p_bukrs
                AND belnr IN S_belnr
                AND ( BLART = 'DG' or
                      BLART = 'ZN' ).
      IF sy-subrc NE 0.
        MESSAGE e368 WITH S_belnr ' ' text-002.
      ENDIF.
    Validate Fiscal year
    AT SELECTION-SCREEN ON p_gjahr.
      SELECT SINGLE * FROM bseg INTO bseg
              WHERE gjahr EQ p_gjahr.
      IF sy-subrc NE 0.
        MESSAGE e368 WITH text-004.
      ENDIF.
    START-OF-SELECTION
    START-OF-SELECTION.
      SELECT BELNR FROM BKPF INTO CORRESPONDING FIELDS OF TABLE IT_DOC WHERE BELNR IN S_BELNR.
    Call Smart form
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = 'ZCREDIT_NOTE'
        IMPORTING
          fm_name            = fname
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
        MOVE sy-subrc TO g_subrc.
        CASE g_subrc.
          WHEN 1.
            MESSAGE e368 WITH 'No form exist'.
          WHEN 2.
            MESSAGE e368 WITH 'No Function Module'.
          WHEN OTHERS.
            " Do nothing.
        ENDCASE.
        EXIT.
      ENDIF.
      CALL FUNCTION fname
        EXPORTING
        ARCHIVE_INDEX              =
        ARCHIVE_INDEX_TAB          =
        ARCHIVE_PARAMETERS         =
         CONTROL_PARAMETERS         = t_ssfctrlop
        MAIL_APPL_OBJ              =
        MAIL_RECIPIENT             =
        MAIL_SENDER                =
        OUTPUT_OPTIONS             =
        USER_SETTINGS              = 'X'
          G_BUKRS                    = P_BUKRS
          G_GJAHR                    = P_GJAHR
      IMPORTING
        DOCUMENT_OUTPUT_INFO       =
         JOB_OUTPUT_INFO            = t_ssfcrescl
        JOB_OUTPUT_OPTIONS         =
        TABLES
          IT_DOC                     = IT_DOC
       EXCEPTIONS
         FORMATTING_ERROR           = 1
         INTERNAL_ERROR             = 2
         SEND_ERROR                 = 3
         USER_CANCELED              = 4
         OTHERS                     = 5
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

  • How to calculate system date through function module date

    Hi friends!!
    i declare a variable "date like sy-datum".
    now i want to add 15 days to the system date,
    please give me the function module name which can do it.
    xample.
    date = sytem date. -> date= 13/08/2010
    i want                          date= 28/08/2010.
    please help.
    Edited by: sandeep08 on Aug 13, 2010 1:53 PM
    Moderator message: date calculation questions = FAQ, please search before posting.
    locked by: Thomas Zloch on Aug 13, 2010 2:03 PM

    Hi,
    You can directly add 15 to the date. It will give you appropriate results.
    Regards,
    Aparna Alashe.

  • Generic Extraction business Requirement, through function module,

    Generic Extraction business Requirement, specifically through function module and source code in function module.

    Dear Karthik,
    Go to transaction SBIW -> Generic Datasource -> Maintain Generic Datasources -> Choose Master/Transaction Data -> Maintain proper entries (Application Component, Descriptions) -> Extraction by FM if you want to extract using FM.
    Maintaining Generic DataSources - Independently of application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any kinds of transparent tables, database views, InfoSets of the SAP query or using a function module. As a result, you can make use of the generic extraction of data.
    Creating a Generic DataSource
           1.      Select the DataSource type and give it a technical name.
           2.      Choose Create. The creating a generic DataSource screen appears.
           3.      Choose an application component to which the DataSource is to be assigned.
           4.      Enter the descriptive texts. You can choose any text.
           5.      Choose from which datasets the generic DataSource is to be filled.
                                a.      Choose Extraction from View, if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
    After generation, you get a DataSource whose extract structure is congruent with the database view or the transparent table view.
    For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
                                b.      Choose Extraction from Query, if you want to use a SAP query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
    After generation, you now have a DataSource whose extract structure matches the InfoSet.
    For more information about maintaining the InfoSet, see the System Administration documentation.
                                c.      Choose Extraction using FM, if you want to extract data using a function module. Enter the function module and extract structure.
    The data must be transferred by the function module in an interface table E_T_DATA.
    For information about the function library, see the ABAP Workbench: Tools documentation.
                                d.      With texts, you also have the option of extraction from domain fixed values.
    Maintain the settings for delta transfer where appropriate.
           7.      Choose Save.
    Note when extracting from a transparent table or view:
    If the extract structure contains a key figure field, that references to a unit of measure or currency unit field, this unit field must appear in the same extract structure as the key figure field.
    A screen appears in which you can edit the fields of the extract structure.
           8.      Editing the DataSource:
           Selection
    When scheduling a data  request in the BW Scheduler, you can enter the selection criteria for the data transfer. For example, you may want to determine that data requests are only to apply to data from the previous month.
    If you set the Selection indicator for a field within the extract structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
           Hide field
    You should set this indicator to exclude an extract structure field from the data transfer. As a result of your action, the field is no longer made available in BW when setting the transfer rules and generating the transfer structure.
           Inversion
    Reverse postings are possible for customer-defined key figures. For this reason, inversion is only possible for certain transaction data DataSources. These include DataSources that have a field that is indicated as an inversion field, for example, the field update mode in the DataSource 0FI_AP_3. If this field has a value, then the data records are interpreted as reverse records in BW.
    Set the Inversion indicator if you want to carry out a reverse posting for a customer-defined field (key figure). The value of the key figure is then transferred in inverted form (multiplied by –1) into BW.
           Field only known in exit
    You can enhance data by extending the extract structure for a DataSource using fields in append structures.
    The indicator Field only known in Exit is set for fields of an append structure. In other words, by default these fields are not passed onto the extractor from the field list and selection table.
    Deselect the indicator Field Only Known in Exit to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list as well as in the selection table.
    9. Choose DataSource -> Generate.
    The DataSource is now saved in the source system.
    Maintaining Generic DataSources
    ·        Change the DataSource
    To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
    You can change the assignment of a DataSource to an application component as well as the texts of a DataSource. Double-clicking on the name of the table, view, InfoSet or extract structure takes you to the appropriate maintenance screen. Here you can make changes required to add new fields. You can fully swap transparent tables and database views, but not InfoSets. If you return to the DataSource maintenance and choose Create, the screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource  -> Generate.
    If you want to test extraction in the source system independently of a BW system, choose DataSource  ->  Test Extraction.
    ·        Delta DataSource
    In the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the associated query. If you want to delete a DataSource, this must not be connected to a BW system.
    Also visit :[Data Extraction from SAP Source System | http://help.sap.com/saphelp_nw04/helpdata/en/28/4c553c42360a40e10000000a114084/content.htm]
    Regards,
    Naveen.

  • Errors occurred during call of function module BUPR_EMPLO_DELETE

    when distributing employee data from (HCM) to (CRM) there is an error that appears in relation with the settings for the Business Parner:
    "Errors occurred during call of function module BUPR_EMPLO_DELETE
    Message no. R11335
    Diagnosis
    The business partner BAPIs were called up incorrectly. The indicator IV_X_SAVE was given differing settings when the modules were called.
    Within a LUW, the indicator must be consistently set or not set.
    System Response
    The indicator IV_X_SAVE should be set or not set once off. Up to COMMIT WORK the content of the field may not be changed, as problems will otherwise occur with the internal memory, thus leading to runtime errors."
    This prevents CRM to be updated with the changes. Kindly help me on the same.

    Hi Sai,
    This is too late to reply this post, but to let everyone know about the issue I am posting here.
    Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
    I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
    You can try the same. Please post the alternate solution if you find it.
    Best Regards,
    Rahul Koshti

  • I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

    i am trying to generate purchase order and i create a BAPI also which is active.
    But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

    Hi,
    Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
    This is my CODE-
    FUNCTION ZBAPIPOTV2.
    *"*"Local Interface:
    *"  IMPORTING
    *"     VALUE(POHD) TYPE  ZPOHD OPTIONAL
    *"     VALUE(POITEM) TYPE  ZPOITEM OPTIONAL
    *"  TABLES
    *"      RETURN STRUCTURE  BAPIRET1 OPTIONAL
    data: ls_pohd type bapimepoheader,
             ls_pohdx TYPE bapimepoheaderx,
             lt_poit TYPE TABLE OF bapimepoitem,
             lt_poitx TYPE TABLE OF bapimepoitemx,
             ls_poit TYPE bapimepoitem,
             ls_poitx TYPE bapimepoitemx.
       MOVE-CORRESPONDING pohd to ls_pohd.
       MOVE-CORRESPONDING poitem to ls_poit.
       ls_pohdx-comp_code = 'x'.
       ls_pohdx-doc_type = 'x'.
       ls_pohdx-vendor = 'x'.
       ls_pohdx-purch_org = 'x'.
       ls_pohdx-pur_group = 'x'.
       ls_poit-po_item = '00010'.
       APPEND ls_poit to lt_poit.
       ls_poitx-po_item = '00010'.
       ls_poitx-po_itemx = 'x'.
       ls_poitx-material = 'x'.
       ls_poitx-plant = 'x'.
       ls_poitx-quantity = 'x'.
       APPEND ls_poitx to lt_poitx.
    CALL FUNCTION 'BAPI_PO_CREATE1'
       EXPORTING
         POHEADER                     = ls_pohd
        POHEADERX                    =  ls_pohdx
    *   POADDRVENDOR                 =
    *   TESTRUN                      =
    *   MEMORY_UNCOMPLETE            =
    *   MEMORY_COMPLETE              =
    *   POEXPIMPHEADER               =
    *   POEXPIMPHEADERX              =
    *   VERSIONS                     =
    *   NO_MESSAGING                 =
    *   NO_MESSAGE_REQ               =
    *   NO_AUTHORITY                 =
    *   NO_PRICE_FROM_PO             =
    *   PARK_COMPLETE                =
    *   PARK_UNCOMPLETE              =
    * IMPORTING
    *   EXPPURCHASEORDER             =
    *   EXPHEADER                    =
    *   EXPPOEXPIMPHEADER            =
      TABLES
        RETURN                       = return
        POITEM                       = lt_poit
        POITEMX                      = lt_poitx
    *   POADDRDELIVERY               =
    *   POSCHEDULE                   =
    *   POSCHEDULEX                  =
    *   POACCOUNT                    =
    *   POACCOUNTPROFITSEGMENT       =
    *   POACCOUNTX                   =
    *   POCONDHEADER                 =
    *   POCONDHEADERX                =
    *   POCOND                       =
    *   POCONDX                      =
    *   POLIMITS                     =
    *   POCONTRACTLIMITS             =
    *   POSERVICES                   =
    *   POSRVACCESSVALUES            =
    *   POSERVICESTEXT               =
    *   EXTENSIONIN                  =
    *   EXTENSIONOUT                 =
    *   POEXPIMPITEM                 =
    *   POEXPIMPITEMX                =
    *   POTEXTHEADER                 =
    *   POTEXTITEM                   =
    *   ALLVERSIONS                  =
    *   POPARTNER                    =
    *   POCOMPONENTS                 =
    *   POCOMPONENTSX                =
    *   POSHIPPING                   =
    *   POSHIPPINGX                  =
    *   POSHIPPINGEXP                =
    *   SERIALNUMBER                 =
    *   SERIALNUMBERX                =
    *   INVPLANHEADER                =
    *   INVPLANHEADERX               =
    *   INVPLANITEM                  =
    *   INVPLANITEMX                 =
    ENDFUNCTION.
    i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". 

  • Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

    Hi experts!
    Got an error when extracting data with extractor 2lis_04_matnr.
    System says (short dump):
    DUMP TEXT START----
    Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
    Exception:   CX_SY_IMPORT_MISMATCH_ERROR
    Error when attempting to import object "MC04P_0MAT_TAB".
    The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
    An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure  "MCEX_BW_LO_API" "(FUNCTION)".                                                                             
    Since the caller of the procedure could not have expected this exception      
    to occur, the running program was terminated.                                
    The reason for the exception is:  When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
    DUMP TEXT END----
    Please, can someone explain me how to solve it? 
    Really need help ASAP!
    Thanks in advance,
    Jaume
    Message was edited by:
            Jaume Saumell
    Message was edited by:
            Jaume Saumell

    Hi,
    Check this note: 328181
    So you need to delete entries in SM13/LBWQ for application and also detup table content.
    And then refill teh set up table.
    If you are in production clear the entries by running collective run no of times for this application 04.
    With rgds,
    Anil Kumar Sharma .P

  • Printing ALV Report output through Function Modules

    Hi All,
    I want to print my ALV Grid output through function modules/statement (not through print option in menu).
    This is because, i am generating a PDF from spool when user clicks on a button. If any changes happened in the ALV output layout, they will be captured in spool through printing it.
    So can you please tell me how to print the ALV Output through FMs or sending the ALV output to spool.
    Thanks & Regards,
    Senthil.
    Edited by: senthil nathan on May 17, 2010 2:49 PM

    Hi Dev,
    Thanks for the reply.
    I want to print the ALV when the user clicks on a button in toolbar. Lets say the user has made some changes to the layout, (E.g hiding a field) and when i print that output it should use the changed layout, If i use the FM suggested by you, i cant acheive this.
    If you try to print this manually, the system uses the changed layout and not the original. Thats why i want to know FMs/statement to print.
    Regards,
    Senthil.

Maybe you are looking for