Error in extracting records for Loan Management
Hi
I am trying to extract records for Loan Management(CFM and CML), but I
am getting Error .
During the extraction phase an error occurred for the extractor. An exception, 'error_passed_to_mess_handler' was triggered.
Following are the extractors I am trying
0CFM_INIT_POSITIONS
0CFM_DELTA_POSITIONS
0CML_CASHFLOW
0CML_INIT_BUDAT
0CML_INIT_DFAEL
0CML_DELTA_CAP
We faced similar problem in Development then change the settings like in customization
" Define InfoSources for Position Initialization " inside BW/CML
customizing. changed the date there to 31.12.2006
and activated the change pointers and transported the chages to R/3
Production ,
but in production it is not working
Pl let me know If some additional settings are required
Hi,
if you run the extractors in the cml-system via rsa3, check out the log. What is the exact message? Is it just tho one you already gave or is there some more information? If you run them in cml, don't forget to specify the target system.
regards
Siggi
Similar Messages
-
What BP Role is used for Loans Management in ECC6?
Hi guys,
Can someone help with the BP role to use for Loans Management in ECC6? The system shows that the old role TR0100 is now obsolete, so in ECC6, what is the role name for FS-CML? Is it FS0000 or something else?
Any documentation on Loans Management in ECC6 will help.
Regards
Fisayo.Hi,
You have to use BP Role TR0100 only. Please check which BP Role Category is assigned to BP Rle TR0100 in spro. There is no change in ECC6 as well. The role name should be "Main Loan Partner"
Regards
Prasad AV -
Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR
Hi, Experts:
I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
I have done the following in client 200:
- Activated datasources for for PM 2LIS_17_I3HDR in RSA5.
- Made selection in RSA6.
- Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
- I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
No extraction structure for event I3: Messages active
Message no. MCEX106
Diagnosis
You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
System Response
Data for event I3 is not transferred to the BW interface.
Procedure
First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
- I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
- I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
Would anyone please help me with what to do to fix this?
Thanks,
Jenny
Edited by: Jenny Chen on Oct 29, 2009 6:38 AMHi, thanks for the reply!
Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
Thanks,
Jenny -
Error while "Enabling Security for Oracle Management Service"
Hi,
I have installed OEM 10GR1 on Solaris 9. I am using 9.2.0 database for repository.
My first installation of OEM and agent went smoothly, and everything was working fine.
Then, I tried to follow configurating security for Grid Control Framework. I got following error:
/oracle/app/oracle/product/10gEM>cd bin
/oracle/app/oracle/product/10gEM/bin>./emctl secure oms
Oracle Enterprise Manager 10g Release 10.1.0.3.0.
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root Password :
Enter Agent Registration password :
Enter a Hostname for this OMS :
Checking Repository... Done.
Checking Repository for an existing Enterprise Manager Root Key... Done.
Generating Enterprise Manager Root Key (this takes a minute)... Done.
Fetching Root Certificate from the Repository... Done.
Generating Registration Password Verifier in the Repository... Done.
Generating Oracle Wallet Password for Enterprise Manager OMS... Done.
Generating Oracle Wallet for Enterprise Manager OMS...Missing /oracle/app/oracle/product/10gEM/sysman/wallets/oms.uxtora1/ewallet.p12
:/oracle/app/oracle/product/10gEM/bin>
Please help.Thanks for response. I had temp space full issue with repository database. After bouncing database, the temp tablespace became empty, and the secure operation went smooth.
-
ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS
Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeemHi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok -
Message no. R3009 - error in extraction program for the DSO
Dear All,
I get the following error, when I execute the data source object, when I select monitor button in the window the process is in Red. So I couldn't get the report at the ODS. Please help me to clear the following error :
The extraction program does not support object ZSHIPTRACKND
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZSHIPTRACKND.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
with Regards,
JeraldWhat release are you at?
Have you searched SAP Notes and the SDN forums for this. A quick search indicates 9 SAP Notes and 15 SDN posts regarding this error message. Unless we know what release level you are at we are unable to offer viable solutions. -
Postings in SAP HR for creating delta records for Time Management
Hi Experts,
I am trying to test delta load for SAP HR Time Management Datasources. I am fairly new to SAP HR and need some help.
Where do we create postings in SAP HR for creating delta records which can be imported to BW. This is for the data sources 0HR_PT_1 and 0HR_PT_2.
Any help is appreciated. Will assign full points
Regards
Sunil Kumar.Hi,
In order to test the above data sources you need to have some employee enter his time details or change the entered time details. That will create some delta records for the planned or actual times. CAT2 transaction should help entering the time details in SAP.
Hope it helps. -
Help with data migration- Balances from legacy system for Loans Management
Hi all,
Can someone please help with this. I need help in how to go about migrating legacy data and balances for loans to SAP FS-CML.
Which flow types to use, and to do the migration.
Thanks.
Fisayo.Hi Fisayo,
good documentation you can find in the transaction KCLJ
=> Help => Application help.
You also can find some documentation in the IMG:
=> Loans Management
=> Tools
=> External Data Transfer
=> Transfer Categories
=> Loans Master Data and Conditions
=> Loans Flow Data
You could use transaction KCLJ to upload the existing flows. For this you need a sender file with the flows you want to upload. This file you can create manually or by a report in the old/legacy system that writes the file in your file system.
The sender structure must be defined in transaction KCLL and you could use transaction KCLT to create or change a file to test the upload program.
You will also find some information in the online documentation.
Please be aware that the upload of flows must be tested very exactly. Iif you take over 'wrong' flows, this could cause serious problems in the future when you work with the contracts.
Best regards,
Tomislav -
Error: A Master Record for 412000/4400PM only exists in 2007
Hi Gurus,
I was using the timesheet (CAT2) and while plugging in the data, i got this message: A Master Record for 412000/4400PM only exists in 2007. When I clicked the log, the diagnosis is: you want to use cost center 412000 together with activity type 4400PM. For this combination, however only one master data record was created in fiscal year 2007. the record is defined in CCA during activity type planning.
Thanks in advance!
Paulextend activity type validity..ask help from FI/CO consultant
-
Error while result recording for test equipment
Dear Gurus
My scenario is to do unplanned maintenance for test equipment and recording the result.
For that I have done the following steps
1) Created Notification for the test equipment (customized notification type TE).
2) For that notification I created order. (customized order type TE01).
3) Attached General maintenance task list for that order. Task list has inspection point 300.
4) Released the order and saved. Inspection Lot is created.
5) In QE51N / QA32 when I tried to do results recording, it shows the following error.
"Equipment VERN01 do not exist in the object list for order 4001214"
Please help me to correct this error.
Regards
Babu RHi
I applied oss and today I got reply. When 1278254 notes is implemented it is solved.
I have one more question, now in QE51N, I did result recording and when saved it is asking for order confirmation, I have given all data and came back to the same screen. There is one more option for Valuate Inspection Point. In that I have selected Can be used option and saved. Now if I goto maintenance order and TECO the order, it is saying that A usage decision has stll to be made.
Whether I want to take UD once again in QA32 ?
Also is there any settings to TECO the notification automatically when the maintenance order is TECO'ed. Now the notification is not TECO'ed when order is TECO'ed.
Babu R -
Error With Uploading Images for Content Manager
Hi Guys
I have tried to upload an image into Content Manager..... and on the concurrent request i get a failed error..+---------------------------------------------------------------------------+
Content Manager: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
BULKUPLOADCP module: OCM BulkUpload Process
Current system time is 04-AUG-2006 11:47:46
java.lang.NullPointerException
at oracle.apps.jtf.util.ErrorStackUtil.getErrorStack(ErrorStackUtil.java:82)
at oracle.apps.jtf.util.ErrorStackUtil.fillDBErrorStack(ErrorStackUtil.java:163)
at oracle.apps.jtf.util.ErrorStackUtil.fillDBErrorStack(ErrorStackUtil.java:151)
at oracle.apps.ibc.admin.ContentItemManager.upsertContentItem(ContentItemManager.java:1776)
at oracle.apps.ibc.admin.contentitems.server.BulkUploadCP.getItemsFromXMLFile(BulkUploadCP.java:518)
at oracle.apps.ibc.admin.contentitems.server.BulkUploadCP.createItemsFolders(BulkUploadCP.java:269)
at oracle.apps.ibc.admin.contentitems.server.BulkUploadCP.runProgram(BulkUploadCP.java:172)
at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 04-AUG-2006 11:47:50
this ist hte logBumb thread. Please follow-up here: http://forums.adobe.com/message/4851765
-
Document management system for loan Module
Is DMS (Document management system ) available for loans management?
We are entering loans in General loan. We want the documents related to
loans like agreement, Interest advices, etc to be uploaded in the SAP
and should be accessed in that particular loan itself. Is there any
system available to attach the documents uploaded (through cv01n) in
SAP to loan? Is standard object for loans is available for this purpose? Object is to
be maintained in Document types in DMS in configuration.
Please help.
Regards
Gaurav GuptaI got the configuration
-
Error in PA40: missing secondary record for infotype 0001
Hi Experts,
while changing the job code of employee i am getting below error in the PA40 transaction for IT0001 .
Error : missing secondary record for infotype 0001 Key
could you please tell me why this message is coming.
Advance thanks,
Regards
RamHi,
Please check out whether any user exits are maintained.
Check ZXPADU01/ZXPADU02 includes.
Please also check out whether there are dynamic actions configured for IT0000 and IT0001 via V_T588Z.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Dec 16, 2009 3:19 PM -
Getting error " Incomplete update due to error in single records"
Dear All,
We are loading data from DSO to Cube using full load and the load is failing giving an error message Collection in the source system ended and when checked the error message button it is showing as " Incomplete update due to error in single records" . and also one more message "Messages (type E) for data records with record number 0
Message no. RSM2714". Can any one tell us the reason for the failure of this load ? and how to resolve it ?.
When we click on the help button of the error message it is displaying the message as below
Incomplete update due to errors in single records --> Long text
Message no. RSM2712
Diagnosis
In the update rules, one InfoSource record was used to create several records in the data target. These records must be handled in the same way to enable tracking into the PSA and the treatment of errors in individual records.
In the previous case, one record was updated in this kind of group generated by update rules, whereas other records in the same group were rejected. If you updated the PSA data record again, the records that were already updated would be updated again. Duplicate records would appear in the data target and the data target would thus be inconsistent.
System Response
The data record with errors was highlighted in the PSA. However, no error request was generated.
Procedure
Delete the request in the data target and, after removing the error, update all records for the request to the data target again.
Regards,
JayaKrishnahi,
Can you please check out the PSA error record and check this out in Source DSO as this load is for DSO -> Cube....
Please correct it in PSA if this is not correct as per DSO ....prior correcting data in PSA pls delete the request from Cube.....then it will allow to correct or delete record in PSA and then further push data from PSA to Target Cube...
If its correct as per DSO then run load in DSO sometime few records wrongly updated by end user and they correct it by evening for Submission....So u will get the corrected record and then run manually further load to Cube...
Hope this will help....
Regards,
Mahesh -
Acct determination for Materials management small differences with keys
Dear all,
While posting a document in MIRO, it throws error as 'Acct determination for Materials management small differences with keys not defined in ch/acts'.
Please advise a solution to rectify this error.
Regards,
VijayHi,
It seems due to small differences between debit and credit side you are not able to post the document price differences). Check all the data to create an entry first and Check the data format. Can you check in OBYC is there a way to have a transaction DIF (Materials management small differences) post to different GL accounts based on valaution class (plant)?
Maybe you are looking for
-
Consider the use case: A performance report needs to be prepared...which would display...the resources provisioned successfully to a user...and the resources failed to provisioned....say if some error occured(for ex. target resource unavailable) or b
-
Error with "rmiregistry" in command prompt
Hello everybody. I am experiencing something really strange. I am doing the exercices on http://java.sun.com/developer/onlineTraining/rmi/RMI.html#RMIArchitectureGoals and now am trying the second one. When I type in "rmiregistry" in command prompt a
-
Again I ask why can I not play video using Firefox?
Firefox will not allow me to play any kind of video. It just won't play since I did the last update. I'm not a good computer fixer upper. So I need simple, easy to follow instructions.
-
I am trying to install CS6 Design & Web premium on my new pc. I have my serial #
I have upgraded my pc, I have the serial # for Adobe Creative Suite 6 Design & Web premium how do I download the programs to the new computer.
-
How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?
How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?