Error in FAX output

Hi All,
I am getting following error when I send the output to fax.
Conversion from OTF to PS: Termination in C_RSPO_PROCESS_DIALOG, return code 128 Printjob not found
Conversion from OTF to PS: Termination in SX_OBJECT_CONVERT___S_PRT, return code 1
Message cannot be processed as it cannot be converted
Need to know if the issue is with ABAP or its related to FAX...
Need this urgently.
Regards,
Shahu

This was issue with the test system environment.. when the same fax output was fired in other test evironment it worked fine...
regards,
Shahu

Similar Messages

Error in Calling Smartforms-During FAX output

Hi experts
I am getting the following error while processing the FAX output type.....
Can you please advice how to proceed on this..
Error message
Error in Calling Smartforms
Processing log of the Output type
Object 0130001210
Output type: Delivery Note
Processing log for program RVADDN01 routine ENTRY
Error during reading T001G (Return code
Cannot process message, no route from userID to fax number
Advance thanks for your support
regards
Raja

Hi experts
I am getting the following error while processing the FAX output type.....
Can you please advice how to proceed on this..
Error message
Error in Calling Smartforms
Processing log of the Output type
Object 0130001210
Output type: Delivery Note
Processing log for program RVADDN01 routine ENTRY
Error during reading T001G (Return code
Cannot process message, no route from userID to fax number
Advance thanks for your support
regards
Raja

Pixma 330 fax output error check paper size

I received a fax on my Pixma 330. The document came through fine, but now I have "fax output error, check paper size and press OK". The paper size is correct, and when I press OK, it prints out the original document again, then gives me the same error message. If I turn off the machine, when I turn it back on, it again prints the document, then gives me the error message. The machine will not let me do anything except press OK. How can I get this to go away? Thanks.

Hi JWK,
Please make sure that the paper is loaded correctly and the settings are correct. To do this, please follow these steps:
1. Flatten the four corners of the paper before loading it.
Note
Align the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams.
If paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat. See Paper is curled..
To avoid curling, handle paper as follows.
- When you do not print, remove unused paper from the Rear Tray, put them back into the package, and keep it on a level surface.
- Take out only the necessary number of sheets from the package, just before printing.
2. Load the paper.
(1) Open the Paper Support, raise it, then tip it back.
(2) Open the Paper Output Tray gently, and open the Output Tray Extension.
(3) Slide the Paper Guides (A) to open them, and load the paper in the center of the Rear Tray WITH THE PRINT SIDE FACING YOU
Important
Always load paper in the portrait orientation (B). Loading paper in the landscape orientation (C) can cause paper jams.
(4) Slide the Paper Guides (A) to align them with both sides of the paper stack.
Do not slide the Paper Guides too hard. The paper may not be fed properly.
Note:
Do not load sheets of paper higher than the Load Limit Mark(D).
After loading paper
When using the machine to copy or print without a computer, select the size and type of the loaded paper in Page size and Media type of the settings screen in each mode.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Error in fax out

Hi All,
While processing purchase orders, the fax output is going into following error log.
SX_OBJECT_CONVERT_OTF_PRT conversion from OTF to PS: termination in
C_RSPO_PROCESS DIALOG, return code 1
SX_FORMAT_CONVERT conversion from OTF to PS: termination in SX_OBJECT_CONVERT----S_PRT, return code
SX_GENERATE_NDR message cannot be processed as it cannot be converted.
Is this issue with the printer or the paper that is being used. This is related to some settings.
Info regarding this will be really helpful.
Thanking in Advance.
Regards,
Shahu

This was issue with the test environment....

PO Fax output issue

Hi,
We have configured FAX output for PO. The fax output is being processed successfully.
We have issue in which if a user processes fax output and its sent successfully from ECC but there is error at the fax machine.
In this case, User might think he has sent the fax but actually it has not been sent successfully.
It was decided that in cases like this, email will be sent to the user who has processed fax indicating that there was error in fax and he needs to re-send PO again. The problem here is , this email which is sent from Fax machine, is not able to specify the PO number for which the error occured.
Is there any way that while calling the PO smart form, i have to pass PO number in specific parameter which can be picked up and send to the user in email so that user knows specific PO which went into error.
Please let me know incase any further information is required to answer this.
Regards,
Shahu

Hi Sudhir,
The solution in the thread are for SRM.
Do we have any solution for the POs in ECC6 R/3?
Thanks
Raju

BI Publisher - PO_DISPATCH Error generating report output

Hi everyone,
Sorry for my bad english... having said that...
I need to modify the Purchase Order print. First, I wanted to see the standard version to get an idea of how much different it was. Well, I don't know because it doesn't work.
Error:
Error generating report output: (235,2309)
Error occurred during the process of generating the output file from template file, XML data file, and translation XLIFF file.
I know there are several topics on the web, but all of them are about new or custom reports, this is a standard one. When I preview the report on the report definition it works fine, so I assume there's a problem with the XML file generated. When I preview the report specifying an alternative XML I get the same error. The XML file I choose was the one generated by PeopleSoft when trying to view the printable version of the PO online.
So, I start cutting portions of the XML File. I started leaving only de Header Data and it works OK, when I add the Lines it failed. I add the Line Fields one by one to detect what was the problem... And finally it failed when I add AMT_LINE_MAX. Why? No idea, is it because its value is '0,000' instead of '0.000'? I don't think that should be the problem since there are other numeric fields on the header, all with ',' as a decimal separator...
Am I missing some configuration?
Thanks in advance.
Regards,
Veronica.

Have a look at the following doc:
"Error generating report output. (235,2309)" When Running the "PO XMLP Dispatch" XML Publisher Report (PO_DISPATCH) for a Purchase Order with a Ship To Location with Special Characters in the Address [ID 1299876.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=1299876.1
Stating this happens for example when there is a location with special characters.

ST22 Short Dump DATASET_WRITE_ERROR Error text: "Input/output error" Error

Dear All,
Please kindly help. I have the following error. Is it possibility due to disk full?
DATASET_WRITE_ERROR
An error occurred when writing to the file
"/capps/AP0/edi/CCM/565500_001105200_00126_20080715_042803.tmp".
Error text: "Input/output error"
Error code: 5
Many thanks in advance,
Yan

Hi,
Check the return code of the OPEN DATASET. May be autorizations for writing might not be there.
If the file is written partially it would be due to memory problem.
Also check the OPEN DATASET Parameters if they are correct.
Hope this helps.

Error flushing the output stream in Sun One server

Hi All,
I was running my servlet code in iPlanet 6.0 version and it was working fine. I upgraded my web server to new Sun One server (Oracle-iPlanet-Web-Server-7.0.9). With the new web server almost 90% of my application works fine, but there is a features in my application to download an Excel sheet by clicking a button. This feature is failing in new Sun One web server.
Below are my piece of code and the error log I m getting. Can anyone tell me how I can fix this error, I mean is there any web server specific change or configuration parameter need to be set.
Please ask for any information regarding my server configuration settings if needed for finding a solution for this
Code:
byte abyte0[] = new byte[1024];
BufferedInputStream bufferedinputstream=null;
BufferedOutputStream bufferedoutputstream=null;
java.io.InputStream inputstream = httpurlconnection.getInputStream();
bufferedinputstream = new BufferedInputStream(inputstream);
bufferedoutputstream = new BufferedOutputStream(httpservletresponse.getOutputStream());
int j;
long byteCount=0;
while((j = bufferedinputstream.read(abyte0, 0, 1024)) != -1)
byteCount=byteCount+j;
if(logger != null && logger.traceOn())
logger.log("total"+byteCount);
logger.log("Read bytes:"+j);
bufferedoutputstream.write(abyte0, 0, j);
if(logger != null && logger.traceOn())
logger.log("Wrote bytes:"+j);
bufferedoutputstream.flush(); // <<<<<< ERROR POINT >>>>>>
Error Log :
ClientAbortException: java.io.IOException: WEB8004: Error flushing the output stream
at org.apache.coyote.tomcat5.OutputBuffer.doFlush(OutputBuffer.java:343)
at org.apache.coyote.tomcat5.OutputBuffer.flush(OutputBuffer.java:313)
at org.apache.coyote.tomcat5.CoyoteOutputStream.flush(CoyoteOutputStream.java:147)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:124)
at com.reuters.bdec.as.ASRequestHandler.processResponse(ASRequestHandler.java:285)
at com.reuters.bdec.as.ASRequestHandler.initiateGetRequest(ASRequestHandler.java:89)
at com.reuters.bdec.as.ASRequestHandler.proceedToDestination(ASRequestHandler.java:220)
at com.reuters.bdec.as.ASExtension.authorisationCheck(ASExtension.java:84)
at com.reuters.bdec.as.ASExtension.doGet(ASExtension.java:114)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:794)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:915)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:398)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:277)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:255)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:188)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:586)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:556)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:187)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:586)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:556)
at com.sun.webserver.connector.nsapi.NSAPIProcessor.service(NSAPIProcessor.java:160)
Caused by: java.io.IOException: WEB8004: Error flushing the output stream
at com.sun.webserver.connector.nsapi.NSAPIProcessor.action(NSAPIProcessor.java:243)
at org.apache.coyote.Response.action(Response.java:197)
at org.apache.coyote.tomcat5.OutputBuffer.doFlush(OutputBuffer.java:339)
... 20 more

Don't flush it yourself. The servlet container will automatically flush for you once its send buffer is full. You can change the size of the send buffer though.

CS5 Error with Animation Output

Running CS5 on a Mac 10.6.4
Every time I render, it gives the following error message:
An output module failed. The file may be damaged or corrupted. (-1610153464)
I've tested the files on a different machine and they open and render out fine.
I did some searches and for some it was the dreaded Optical Flares plugin from Video CoPilot causing this same problem.
I'm having these issues and I don't have any plugins installed.
Re-Installed everything 3 times, trashed preferences, removed plugins from the Application support and still no luck.
The only thing that works for me is outputting to a PNG or JPEG sequence.
If I try to render using the Animation preset, It gives the error message.
I also have been getting a weird "MooV" error message when I try to import certain types of quicktime files. Not all just a few random ones.
All of this leads me to believe it may be an issue with 32 bit Quicktime.
Any suggests on how I can get the Animation preset working again?
Thanks.
It gives an error message

Sure, I had the exact problem posted at the top of this thread. Spent two days reading all the posts regarding anything that had to do with this Output Module error. I finally came upon a post of someone who was having a similar issue as I with the hang at start up. However, the post was replied to by a guy who said "Repeat the hang with only AE running, then go to the Activity Monitor and select the QT32 Server process. Then press the "Sample Process" button at the top of the window...It looks like both of you are having a similar problem with a third party AVI codec. Please remove or uninstall any third party AVI codecs such as DivX, XVid, etc. from your system and try AE again."
"You can also temporarily disable these components by closing any QT related apps and then dragging components out of the Library/QuickTime folder on your boot drive. If that works, try adding them back one by one until it fails again. That is the problem codec."
So I removed AviImporter.component from Library/Quicktime on the boot drive and these two problems were solved.
Here is the link to the post where I found this info.
http://forums.adobe.com/thread/634237?start=0&tstart=0

Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/char.bin Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/dicrc Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/matrix.bin Open error 5: "Input/outp

Please can any one help.
All sound has disappeared from my imac, it just 2 years old, I've run disk warrior and disk repair/verify and this is what come up.
ARe there any solutions?
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/char.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/dicrc
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/matrix.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/sys.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/unk.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/sc/BE/matrix.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/sc/BE/sys.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/sc/BE/unk.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/char.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/dicrc
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/matrix.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/sys.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/unk.dic
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeDirectory
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeRequirements
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeResources
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeSignature
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/_CodeSignature/CodeRequirem ents
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/PlugIns/AppleSM56KU SBModemFamily.kext/Contents/_CodeSignature/CodeRequirements
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/Resources/English.l proj
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/Resources/English.l proj/InfoPlist.strings
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/_CodeSignature/Code Requirements

Whew, generally those errors would indicate a serious Hard Drive problem, but possibly RAM or Logic Board... any other drives connected?
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029

Java.sql.SQLException: File input/output error: File input/output error: re

Hi,
We are using JCAPS 512. We use oracle eway to connect to Oracle 10g database. But sometimes we are getting the following exception
and suddenly all jcds stop processing. If we restart the server again job continue processing, otherwise server hangs and nothing get processed.
Exception is as follows
java.sql.SQLException: File input/output error: File input/output error: reading: java.io.EOFException in statement [SET TABLE EVENT_STORE INDEX '11183416 55935']
     at org.hsqldb.Trace.getError(Unknown Source)
     at org.hsqldb.Log.runScript(Unknown Source)
     at org.hsqldb.Log.open(Unknown Source)
     at org.hsqldb.Database$Logger.openLog(Unknown Source)
     at org.hsqldb.Database.open(Unknown Source)
     at org.hsqldb.Database.<init>(Unknown Source)
     at org.hsqldb.jdbcConnection.openStandalone(Unknown Source)
     at org.hsqldb.jdbcConnection.<init>(Unknown Source)
     at org.hsqldb.jdbcDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(DriverManager.java:525)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.addNewConnection(DBEventStore.java:359)
     at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.getConnection(DBEventStore.java:444)
     at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.executeParameterizedQuery(DBEventStore.java:777)
     at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.access$000(DBEventStore.java:250)
     at com.stc.eventmanagement.impl.DBEventStore.getEventIDsList(DBEventStore.java:133)
     at com.stc.eventmanagement.impl.DBEventStore.getEventIDsList(DBEventStore.java:115)
     at com.stc.eventmanagement.impl.EventForwarderMBean.cachePersistedEvents(EventForwarderMBean.java:728)
     at com.stc.eventmanagement.impl.EventForwarderMBean.setup(EventForwarderMBean.java:334)
     at com.stc.eventmanagement.impl.EventForwarderMBean.invoke(EventForwarderMBean.java:565)
     at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
     at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
     at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
     at com.stc.eventmanagement.impl.EventManagementService.setupEventForwarderMbean(EventManagementService.java:270)
     at com.stc.eventmanagement.impl.EventManagementService.registerMBean(EventManagementService.java:147)
     at com.stc.eventmanagement.impl.EventManagementService.startService(EventManagementService.java:96)
     at com.stc.eventmanagement.impl.EventManagementResourceAdapter.start(EventManagementResourceAdapter.java:75)
     at com.sun.enterprise.connectors.ActiveInboundResourceAdapter.<init>(ActiveInboundResourceAdapter.java:94)
     at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:74)
     at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:269)
     at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:372)
     at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:204)
     at com.sun.enterprise.server.ConnectorModuleLoader.load(ConnectorModuleLoader.java:87)
     at com.sun.enterprise.server.ConnectorModuleLoader.load(ConnectorModuleLoader.java:108)
     at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:216)
     at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:106)
     at com.sun.enterprise.server.ApplicationLifecycle.onStartup(ApplicationLifecycle.java:183)
     at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:295)
     at com.sun.enterprise.server.PEMain.run(PEMain.java:238)
     at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
|#]
Please provide some suggestions to overcome this error
Regards
Venkatesh.S

Delete the EventStoreDb.data file (its somewhere in your logical host) and restart the logical host.

Fax output - Chinese characters are garbled

Hello,
We are using fax output for two forms ( One smartform and the othe sap script). Both the form outputs are thorugh the same fax device. For the smartform output there are no issues and the output is as expected but for the sap script output the chinese characters are garbled. Instead of the chinese characters i get output like _____ _______>,<%,,<< etc.
Interestingly, if i have a look at the print preview or take print out there is no issue and the characters are as expected. The issue arises only during fax.
Can someone help pls?
Thanks,
Venkat

HI friend,
I found few same post in SDN which are related to this Chinese characters in SAP Scripts.
Please see this link and find is the problem is same as yours if so make use of it.
Link: [Output of Sapscript in Chinese language|Output of Sapscript in Chinese language;
Link: [Problem displaying Chinese Characters|Problem displaying Chinese Characters in SAP script form WESCHEINVERS1;
I think these will be helpful please revert back to me after going through the links.
Thanks,
Sri Hari

Error in 'Screen output w/o coonection to user' function BAPI_APOATP_CHECK

Hi Experts,
I am trying to create a new condition record for pick/pack time (Transportation and Shipment Scheduling) in APO, by creating a entirely new condition table & keeping highest access sequence no.
But after creating this & moving it to staging system, we are getting error of "Screen output w/o coonection to user" in creating Sales order in R/3 & check for ATP.
RFC connections are working fine.
Could you please help, I consulted with BASIS about system vs dialog users, but that's not issue according to them, as the client set-up is quite old, it won't be necessary.
Could you please help me in this?
Thanks a lot !
Anurag Patki.

Hi Tiago,
Thanks a lot for the help.
BASIS team changed the user to dialog user.
Could you please suggest as what might went wrong for system to behave like this? And has this any co-relation with the changes I made & transported to staging system. As the changes made were cross-client. Was this the issue?
I appreciate your support on this.
Anurag Patki.

Reset errors in iostat output

I would like to reset errors in iostat output. Is it possible without rebooting server? I am running Solaris 9 - SunOS imcfoxy 5.9 Generic_122300-14 sun4u sparc SUNW,UltraAX-i2.

I assume the OP is talking about the counts like "Soft Errors" and "Hard Errors" for devices.
I don't know of any way to reset the counts short of unloading the drivers. And I don't think you will be able to unload any of your storage drivers without a reboot.
Darren

Fax output with Medium 7 in the condition record

Hi all,
Have any one tried the below scenario?
I want to send the fax output to my sold to party.I want to Select the medium as 7 instead of 2 in the condition record and when I double click the line I have an option to select the fax number as recipient type and I can enter the Fax number in the recipient field
Usually, medium 7 would be used to send the mails.But Will it work for Fax output?.What is the difference between using medium 2 and medium 7 with recipient type fax number.
If someone worked on this, Please let me know
Regards
Mano

Answered

Error in FAX output

Similar Messages

Maybe you are looking for