Error in File-File Scenario

Dear All,
I am doing a simple file to file scenario and the scenario is getting executed successfully.
I am having a query that suppose at the target there is no folder existing where I needs to put the required file then I want one alert for this.
I hve tried doing the alert configuration, it is giving me a mail that error is there in the scenariobut it is telling me exactly where the error is occuring.
Kindly guide me on this how this can be done.
Warm Regards,
N.Jain

Hi Nishu,
Well this blog could help you out in properly configuring the alerts.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2328. [original link is broken] [original link is broken] [original link is broken]
Hope this should help you.
Reward points if useful.
Thanks
Younus

Similar Messages

Error while doing File to File Scenario

All,
I am trying a simple file to file scenario - where xi picks up the file from a location and maps the message and dumps it in another location.
I am Getting the below error while doing the same .........
Time Stamp Status Description
2009-03-30 14:30:24 Success Channel Test_send_cc: Send binary file "d:\input\input.xml". Size 203 with QoS EO
2009-03-30 14:30:24 Success Application attempting to send an XI message asynchronously using connection AFW.
2009-03-30 14:30:24 Success Trying to put the message into the send queue.
2009-03-30 14:30:24 Success Message successfully put into the queue.
2009-03-30 14:30:24 Success The application sent the message asynchronously using connection AFW. Returning to application.
2009-03-30 14:30:24 Error Attempt to delete file "d:\input\input.xml" after processing failed. Retry
2009-03-30 14:30:24 Success The message was successfully retrieved from the send queue.
2009-03-30 14:30:24 Success The message status set to DLNG.
*+2009-03-30 14:30:24 Error Transmitting the message to endpoint http://filip:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.*
2009-03-30 14:30:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Mar 30 14:35:24 GMT+05:30 2009.
And i cant see the meesages using the SXMB_MONI trasaction
please help me resolve ths issue
Regards,
Mahesh.
Edited by: mahesh uma on May 3, 2008 2:12 PM

Hi Uma,
Go through this links::
Hope these links are useful to you..
Urgent: Message not transmitted from AFW to Integration server
Error with huge file
File to JDBC error
Thanks,
Satya Kumar..

Error in file-file scenario: HTTP response contains status code 503

Hi folks,
I've encountered the foll error in file-file scenario:
Testing file-file scenario (followed the blog: https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&)
Initially i was hving problems with recvr comm channel, which are now resolved. File is sent successfully but not recvd. I tried to modify the scenario above and change the file type to 'Text' but still got the same error.
I've checked SICF -->default_host/xi/engine , we dont maintain logon data there. when i test the default_host/xi/engine service, it resolves into an ip addr as follows:
http://<hostname>.<domain.com>:8001/sap/xi/engine?sap-client=<clientNo>
(Also, we hv a BW system running on the same server ,which uses a fully qualified domain, while we dont which is why we get the above domain. Im not sure if there are any issues with that.)
and we get the foll error:
Error Code 10060: Connection timeout
If i remove the domain manually, im prompted for userid/pwd and get the foll result:
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Pipeline specified in URL attribute (type) not existing</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine?sap-client=<clientNo></SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID , which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=811)</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
also, we dont hv any overload issues as this is dev env and not many of us are using the xi server. Would really appreciate if any of you can share your inputs on how to resolve this. Thanks!!
cheers
Prachi

Hi ,
Look in to this for all errors
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
<b>Award Points if found usefull.</b>

ATTRIBUTE_IDOC_RUNTIME error in File-IDOC Scenario

Hi,
I got this error in FIle-IDOC scenario.
ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPMMX, client , RFC destination contain errors
There are many threads on same issue. Almost in all threads, the suggestion given was, we need to check the Channel Definition(Port should be SAP<SYSID> and not SAP<SYSID>_<CLIENT>)
I have given the proper values for RFC desitnation and port. Even then, I m getting this error.
Is there any other suggestions?

Hi aarthi,
I suggest u chk all d settings dat u hav done..
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
Step 6)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 7)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
reward points if helpful...
MenoN

Error in IDOC - File scenario

Hi Experts,
This is my error :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>INTEGRATION_SERVER_XID</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert the sender service INTEGRATION_SERVER_XID to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
OTHER ERROR FOR PAYLOAD OF SENDER PART IS AS BELOW :
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The character '>' was expected. Error processing resource 'file:///C:/Documents and Settings/ABC/Local Settings/Tempor...
<?xml version="1.0" encoding="UTF-8" ?><ZZ/AFS/FUNACK><IDOC BEGIN="1"><EDI_DC40 SEGMENT="1"><TABN...
Please Help,
Regards,
Study SAP

Hi,
The problem occurs when sender and receiver business system or business service does not have a logical system name.
ID - Integration Directory
Posting the IDOC'S into SAP R/3 System, sender and receiver business system or business service requires the logical system name. If the business system (Web As ABAP) does not have the logical system name, then add the logical system for business system.
In technical system browser
If business system type = Web AS ABAP, then add the Logical system in Technical System level and Save.
If business system type = Third-Party, then add the logical system in business system level and Save.
If the business service does not have the logical system name in ID, it needs to be configured as follows.
Check the below screen shot which shows how to add the logical system for business service.
Go to ID and click the Business service -> Services -> Adapter Specific Identifiers. Enter the logical system name and Save.
Apply and activate.
Hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

[Error] Microsoft SQL Server 2008 Setup. Error reading from file msdbdata.mdf

Hi all
I'm trying to install SQL 2008 Express on my Computer: Hp compact DX7300 Slim tower.
and get this error:
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:Error reading from file d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template\msdbdata.mdf. Verify that the file exists and that you can access it.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0&EvtType=0xF45F6601%25401201%25401
Log file
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-12-09 23:22:03
End time: 2014-12-09 23:40:28
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\sql_engine_core_inst_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0
Machine Properties:
Machine name: VISTA-PC
Machine processor count: 2
OS version: Windows Vista
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: d:\8268cd7b247d294de359c9\x86\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
ENABLERANU: True
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: d:\8268cd7b247d294de359c9\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: VISTA-PC\VISTA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\SystemConfigurationCheck_Report.htm
I will very appriciate if someone can help me solve it. I was trying to set Full control for my account in Properties/Security of root folder and try again but error is still.
Many thanks

Hi Foreverduy,
Before you run SQL Server 2008 express setup, make sure that you have installed Windows installer 4.5 and.NET Framework 3.5 SP1 manually. For more information about the process, please refer to the article:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx. Moreover, please turn off all the third-party softwares which could prohibit the installation process.
According to your error message, the issue could be due to that your account has no rights to install SQL Server, or the corruption on the media.
Firstly, please ensure that your account has admin rights. Also make sure that you right-click the setup.exe and choose “Run as administrator” to complete the installation.
Secondly, please check if "msdbdata.mdf" file exists at d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template. If it exists, please make sure that your account has read permission to the extracted
folder.
However, if the file doesn't exist in the extraction, the media could be corrupt. Please download the
media
again and check if the issue still occurs.
Regards,
Michelle Li

Error at Receiver File Adapter

Hi All,
Mine is FILE (txt) to FILE (txt) scenario with content conversion.
No problem from SENDER FILE adapter.
No problem in XI pipeline processing.
Error at receiver adapter:
The eror is:.. 1.fieldSeparator is missing or 1.fieldFixedLengths is missing...
Though, I have checked at Receiver Adapter configuration that
*.fieldSeparator is properly filled.
There are no optional fields as such in the input file.
Thanks,
Shaily

Hi,
Check the links on FCC and compare what u have gave is correct or not.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful

How to handle errors in a file at sender side?

Hi
I have done a file to proxy scenario.
I know how to handle errors on proxy.
But on sender side when picking the file if one the record have worng fomat its throwing mapping error and its not processing any record..
I wanted to process the records which have right format and data and all remaining recrods which have wromg format should be send back to the sender as file.
How to do this.
How to handle error in sender file.
Regards
Sowmya

Hello Sowmya,
In your scenario Three ways you can validate the data.
1) Before the data reaches into SAP system ie in XI system during Mapping or before mapping i,e in Adapter Module in the Sender side
2) this option, is in the receiver applications side. ie. Validations will be taken care in the SAP system i.e in ABAP server proxy code.
3)Through BPM, If Mapping Exception Occures then through exception Branch you can send bad formate file to sender again.
Generally, it is prefer to more business critical validations in the Application System ie Receiver Application System (ABAP Server Proxy)
In this, you can have more flexibility of the validations as you are validating some of the SAP payroll informations as Personal ID etc.
Based on the complexity and flexibility of the requirement, you can either do this in the XI (if XI, ie Sender Adapter Module or Mapping) or in the ABAP proxy
Thanks'
Sunil Singh

ERROR :Conversion of file content to XML failed at position 0

Hi Frnds,
I have a File to File scenario, while testing I am getting the following error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'TA_830':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
Can any one please tell me why Iam getting this error even I have provided the following informantion in channel configuration. Here TA_830 is the record name.
TA_830.processFieldNames     fromConfiguration
TA_830.fieldNames     SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,REF_NUM,PAYER_ACC,VAL_DATE,ISO_CURRENCY,AMOUNT,RESV_11,SEG_NUM,EXCHG_RATE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_18,SEG_NUM,BANK_ID,BANK_CODE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_5,SEG_NUM,ACCOUNT,ADDR1,ADDR2,ADDR3,ADDR4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,TOTAL_AMOUNT,RESV_59
TA_830.fieldFixedLengths     2,6,12,5,6,7,5,5,3,1,1,16,24,6,3,15,11,2,12,24,24,24,24,18,2,1,24,24,24,24,24,5,2,24,24,24,24,24,6,2,30,30,30,30,6,2,30,30,30,30,6,2,6,12,5,6,7,5,5,3,1,1,16,59
TA_830.fieldContentFormatting     nothing
Regards,
Shiva.

Hi,
As you are using Fixed Length File...use below specified parameters:
TA_830.fieldName:          Names of Fields in teh File
TA_830.fieldFixedLegths: Lenghts as per your file
TA_830.keyFieldValue:    If you use any value as key
TA_830.lastFieldsOptional: YES
TA_830.endSeparator :        'nl'
This will help you out..
Thanks,
Kishore.

IDOC to File - FCC scenario

Hi Friends.
Scenario is in PI 7.0 . IDOC is received from SAP and after file content conversion placed in file server.
Suddenly few days back it started throwing error in receiver file FCC communication channel - error is -
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long (>3 for 27. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long (>3 for 27. column) - must stop', probably configuration error in file adapter (XML parser error)
but the same scenario with same inputs (same payload,same IR and ID configuration) works fine in development environment.
in SXMB_MONI message shows as SUCCESSFUL and payload is also OK.
Pls suggest what to do in this case..

Hi,
This is happening because - if there is any empty tag coming from source then target structure tag will not be created and because of which ur payload structure and FCC configuration is not matching.
I would recon use map with default between source n target strcture so in case source tag dont have value target structure will be created because of mapwithdegfault fuction and ur FCC will not fail.
Open SXMB_MONI output payload and compare the structre with Data type u will se for no source value target tag is not created at all and FCC is failed.
For exa- I ahve name,age,*** as my target data type and FCC is 10,3,4
If i dont receive age from source the value of *** is taken as 3 length as per FCC becus age tag is not created in target.
chirag

Execute ABAP Program - Error in Open File Cust_Dim.dat

HI All,
I am trying to Implement scenario of Data Service designer for Extract SAP Application data (page no. 181 Onwards). It is for transfer data from SAP ECC - KNA1 to MSSQL table.
I have Data Service server install on my system.
I have implement all the steps. When I execute job server. I am getting error like
"Execute ABAP program <C:/Program Files/Business Objects/BusinessObjects Data Services/ZCUSTDIM_1.aba> error < Open File Error -- C:\Program Files\Business Objects\/Cust_Dim.dat>"
Does anyone knows about this? I have tried to find lot in SDN but didn't find any solution.
Thanks
Ratnakar

Hi all
I was having the exact same problem as the one explained here.
I was a little mixed up because I assigned full privileges on the destination folder to one specific account called installsap
I used this account for installing SAP BO Data Services. This account is the one configured on the Business Objects Data Services Service:
However, I kept getting the same error, as if this account had not enough privileges over the folder.
I saw that there is another Service called Server Intelligent Agent. I went through its configuration Properties by using the Central Configuration Manager, specifically within the Log On As Property and it seemed like a non specific System Account was configured there.
Then I open the services.msc (Windows application) in order to see this very same service configuration and it had NOTHING specified there, nor a Local System Account nor an specific user account.
So, I stopped the service and specified the installsap account I used for the Business Objects Data Services Service. After that I verified I could see this configuration through the Central Configuration Manager and now both tools showed the same.
Then I started the SIA Service retried again executing the ABAP Data Flow and the Error in Open File was gone.
It is how the SIA Service configuration looks like.
By the way, I am not sure if the "Job Server Service" which was cited before in this thread is the same as the Server Intelligence Agent Service I modified
Besides, although I've been using DS for quite a considerable amount of time, I have never heard of such "Job Server Service". Let me know if I am wrong.
Anyways it worked for me and I hope it works for someone else who faces the same error.
Best regards!

FILE - FILE Scenario - output file is not available

Hi
I'm doing simple file - file scenario based on the weblog
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
In RWB >> msg monitor shows, the message status is successful. But I'm unable to find output file in the directory as I mentioned.
Pls help me where to find.. what is the problem
- Govind J

Hi Govind,
These are a few things you can do:
Check the permissions of the folder where the file is being generated by XI.
If you are doing Content conversion, please can you just remove it and see if the XML file is getting generated.
Also, please check if it's picked up by any other application when you place it on the server.
I am assuming out here that you are speaking abt the file that is give by SAP XI after processing the incomming file.
Also check default .trc log file in visual admin.it will tell u if there any errors
and also check the permissions of the files generated by XI
Regards,
Abhy

Problem in File-File Scenario

Hi All,
I am doing File->File Scenarios. There is no Recrod set also. I want to rename the file using XI. No mapping required. To rename the File name we can do the coding related to Dynamica configuration in one UDF and will map to the top node of the target. But i don't have the mapping here, So How can i execture this UDF or Do i need to write the Module in File adapter CC.
I tried with dummy mapping , But I am getting the following error
</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE
</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_
</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException
</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~
</SAP:P3>
<SAP:P4/>
<SAP:AdditionalText/>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRu
ntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~
</SAP:Stack>
The mapping part is correct. There is no doubt on that. I don;t know why i am getting this error. Can you please tell me what could be the reason or any solution to resolve my problem.
Points will be rewarded for helpful answers.
Thanks in advance,
Best Regards,
Vijay

Bhaskarudu,
Option 1: If you only want to rename the file then pick the file and rename the file in receiver communicatin channel and write. Check this weblog for some help:
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Option 2: If you want to rename the file dynamically then you should do the mapping. Check this weblog for this:
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
Option 3: If you are picking the file within your organisation which is shared on NFS then you use OS commands in the file adapterd to rename the file.
Regards,
---Satish

Simplified Chinese format problem in File-File Scenario.

Hi,
I have configured File(FTP) - > File(FTP) Scenario.
I am expecting a Chinese File from Source system which is AS400. I am using the file encoding format UTF-8 while the chinese characters are in GB2312 format. My sender file adapter picks up the file correctly, but SXMB_MONI gives Mapping related Parser error. Kindly Suggest.
Do i need to change some character set or code page? if yes, where should it be done?
Thanks Charu.

Hi,
Under File Encoding, specify a code page.
The default setting is to use the system code page that is specific to the configuration of the installed operating system. The file content is converted to the UTF-8 code page before it is sent.
Permitted values for the code page are the existing charsets of the Java runtime. According to the SUN specification for the Java runtime, at least the following standard character sets must be supported:
US-ASCII
Seven-bit ASCII, also known as ISO646-US, or Basic Latin block of the Unicode character set
ISO-8859-1
ISO character set for Western European languages (Latin Alphabet No. 1), also known as ISO-LATIN-1
UTF-8
8-Bit Unicode Character Format
UTF-16BE
16-bit Unicode character format, big-endian byte order
UTF-16LE
16-bit Unicode character format, little-endian byte order
UTF-16
16-bit Unicode character format, byte order
Check which other character sets are supported in the documentation for your Java runtime implementation.
XML text documents generally contain their own code page description and should be treated as binary data type.
If it is not there the you need write the Adapter module for sender side .
Or you can use the XSLT mapping using CDATA.
see the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards
Chilla

Exceptions in file-idoc scenario

Hi Folks,
I am developing a file-idoc scenario. What are the different exceptions I would be needed to handle apart from the following two identified?
1. Mapping issue
2. Problem in posting the idoc (SAP system may be down and others)
Thank you

Hi Raja,
The errors an happen at following steps:
1. Error while picking the file:File adapter error
2. Error in mapping: error due to incorrect data, incorrect format, corrupt file etc.
3. While posting Idoc: due to Incorrect userId password, due to structure not matching, destination system being down.
Hope this helps.
Regards
Vijaya

Help with simple file to file BPM scenario

Hi Gurus,
I am doing simple file to file BPM scenario.
I am getting an error in SXI_CACHE with status code 99.
I activated the business process then status code changed to 2.
When i tried to activate the process again i am getting prompted to enter access key details.
Is there any other way to get rid of the error i.e., to get the status code to zero with giving access key details.Sample access key details are also greatly appreciated.

Hi Bhavesh,
I tried doing that but of no use.
I registered at https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm
and got a mail with details.I was actually looking for access key details in the mail from sap.The details in the mail contains License key but not access key .Are the both access key and license key same?

Error in File-File Scenario

Similar Messages

Maybe you are looking for