Error in File-RFC-File Without BPM

Hi,
We are following this wiki
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)]
and we are getting Error: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Internal Server Error in sender communication channel monitoring. File is not picking. I think problem with the parameters that we have mentioned in module tab in sender communication channel as specified in the wiki. If we remove additional 2 parameters it is picking the file.
Please help me to resolve this issue.
Thanks.
Jyothi Anagani.

are you able to see the logs of file adapter?
go to messaging system and check the details
http://host:port/MessagingSystem/monitor/monitor.jsp
Rajesh

Similar Messages

File-RFC-File (without BPM)- Issue

Hi All,
I am working on a File-RFC-File (without BPM) scenario in PI 7.1.
My scenario is having few problems like, its not able to delete the file from the source directory path (for which we have delete permissions) and it is an NFS system and it shows an error in the Sender file CC.
"Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId"
But it gets processed successfully and provides a written paramter which I could see in MONI, but again doesn't write the file in the target directory. Could you please provide your inputs and let me know if I need to do any additional settings w.r.to PI7.1.
These are the parameters which I have specified in the Sender File adapter
Processing sequence
AF_Modules/RequestResponseBean     Local Enterprise Bean     1
CallSapAdapter     Local Enterprise Bean     2
AF_Modules/ResponseOnewayBean Local Enterprise Bean     3
Module configuration:
1     PassThrough     true
3     receiverChannel     <FilereceiverCCname>
3     receiverService     <Receiver Bus System>
Regards,
Nithiyanandam

Hello,
Check out in module configuration tab for any "type error" or spell mistakes.
Check out this thread which might be useful for you :[ File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.]
regards
Ramesh

File - RFC - File without BPM --- Object not found in ResponseOneWayBean

I am using PI 7.1, and facing the following error in File - RFC - File without BPM
"Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ResponseOneWayBean."
I am using 1 sender CC for File ( CC_LOTUSNOTES_CHALET_SND)
                  1 receiver CC for File( CC_LOTUSNOTES_CHALET_RCV_FILE)
                 1 receiver CC for RFC (CC_LOTUSNOTES_CHALET_RCV_RFC)
in the sender CC I have given Module parameter as:
Processing sequene
CallSapAdapter    Local Enterprise Bean 2
AF_Modules/ResponseOneWayBean Local Enterprise Bean 3
AF_Modules/RequestResponseBean Local Enterprise Bean 1
Module configuration:
1     passThrough          true
3    receiverChannel      CC_LOTUSNOTES_CHALET_RCV_FILE
3    receiverService       Bus_File
pls let me know where i am wrong

Hi
i am facing following error:
2009-12-03 09:08:17       Information        The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2009-12-03 09:08:17       Information       MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2009-12-03 09:08:17      Error                 MP: exception caught with cause java.lang.NullPointerException
2009-12-03 09:08:17      Error                 File processing failed with java.lang.NullPointerException

File is not getting deleted in File-RFC-File without BPM

Hi,
I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
For the sender CC, I'm passing the following parameters,
Transsport protocol: File system
Message protocol: File
QoS: BE
Poll Interval: 30 sec
Mode: Delete
File type: Binay
Please let me know if I missed anything while passing the values.
Thanks,
Swamy
Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

Hi
Then , is Sender and receiver File Adapter is using same folder )
Just a question.
But having all permisions and above config would delete the file
can u see the status of u r File Adapter in RWB.? Is it in green?
rgds
srini

Problem with File RFC File scenario without using BPM

Hi all,
I am trying a File RFC File scenario without using BPM with the help of the following thread:
File - RFC - File without a BPM - Possible from SP 19.
The XI system is PI 7.0 sp 12. When I am trying to acheive the above scenario, I am getting wierd results i.e., when I observe in SXI_MONITOR, the message is showing as processed successfully, but when I watch the message status in communication channel monitoring, I am getting the following error:
"Attempt to process file failed with com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=DEV120;TS=Test_Service;AN=MI_Invoice;ANS=urn:sap.com:test;"
I am not able to understand what the problem is. By the way, one more thing, is, I have kept the File processing mode as "Delete" in the sender file adapter. But the file is not getting deleted. I think the reason could be because of the above error.
Can any body help me out in getting my problem resolved?
Thanks,
Adithya K

CPA Cache Refresh from the Adapter Engine To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following
URL: http://<host>:<port>/CPACache/refresh?mode=<b>delta|full</b>
The Monitoring url is like this: http://<host>:<port>/CPACache
Thanks & Regards,
Farooq.

File-RFC-File Sync-- BPM error..

Hi All,
My scenario is File -- RFC -- File, synchronous scenario, The scenario needs to be designed using BPM its clients requirement, and i have used Receive step, BLOCK and in the block Transform, Sync Send, Transform and with in the block i have used control step with cancel process.. and out of block send step .. when i execute the scenario, in sxmb_moni i can able to see the response message and when i see in SXMB_MONI_BPE the flow was blocked in the BLOCK1 Step and i am not getting the response file in my target ftp directory.. so request you to post any links how to debug this issue..
regards,
sai

BLOCK and in the block Transform, Sync Send, Transform and with in the block i have used control step with cancel
process.
when i execute the scenario, in sxmb_moni i can able to see the response message and when i see in SXMB_MONI_BPE the flow
was blocked in the BLOCK1 Step and i am not getting the response file in my target ftp directory.
The BPM is working perfectly as designed....you have a maintained a Cancel Process step....how in such a case will the BPM proceed? The BPM is bound to stop in side the block itself the BLOCK1.
What is the reason of having a Block over Transform --> SYNC Send --> Transform?
Your BPM should be:
Receive --> Transform --> Sync_Send --> transform --> Send.
If you want to have a block then have it for the individual steps with an Exception Branch and then in this Exception Branch have a Conntrol Step cancelling the process.
Regards,
Abhishek.

Request Message mapping in SXMB_MONI for File - RFC - File without BPM

Hi ,
In my File-RFC-File scenario, the messages are processed successfully.
but when i look into the SXMB_MONI for File to RFC step, the records are present only till the Message split According to Receiver List and not able to see the records from Request Message mapping step onwards.it contains
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:Z_PI_LOTUSNOTES_UNIFORM xmlns:ns1="urn:sap-com:document:sap:rfc:functions" />
in my mapping for the receiver RFC i have not done the mapping for all the fields. few fields i have disabled. whether this could create a problem in message mapping. pls let me know what needs to be done.

Is it only for this scenario that the above display issue is occuring or is it for all scenarios?
If onlt a particular Pipeline steps are displayed then you can check what is the TRACE level set in SXMB_ADM --> Integration Engine Configuration --> and check if the TRACE parameter is set to at least 2 (max is 3 which will ensure that your DB will get full quickly)
For more information refer: /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Regards,
Abhishek.

Java.lang.NullPointer Exception in File-RFC-File wtihout BPM scenario

Hi All,
I have implemented scenario File - RFC - File without BPM in PI7.1 according to below link by bhavesh
[File - RFC - File without a BPM - Possible from SP 19.;
but I am getting error java.lang.NullPointer Exception in Audit log of sender communication channel when it enters in ResponseOnewayBean.
I had implemented the same in PI 7.0 but there it was working fine.
Is there any limitations on the use of the above beans in PI7.1 as I could see two more threads on the same unanswered yet.
Please help me in resolving as it is priority task for me
Thanks,
Amit

Sometime back I saved this SAP Note 1261159 for this error. Not sure if it is still valid. Try to get it implemented.
Regards,
Prateek

Error messages while executing File - RFC - File.

Hi,
I am doing a File - RFC - File scenario from Raj's blog.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file%2528without+bpm%2529&
I am getting series of error messages.
Someone please drive me in the right way. I am following each and every step in the same way mentioned there.
1. Everytime the file is picked up, i can see 3 messages in Moni. One from File - RFC. 2 messages from RFC - File. I changed the sender QOS with BE and EO and EOIO. but all the time it shows 3 messages. Why are 3 messages executing for this scenario? what should be QOS on the sender File CC?
2.. It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
I re created CC, re imported RFC, searched for that erorr message in sdn and followed everything. no luck
3. Of the other 2 messages in MONI (RFC - WS), one of them shows error messageg as 2 and the other one shows a error message that Interface mapping does not exist in run time cache.
I re created IR objects again, I created MI for RFC which I dint do earlier, I re mapped, activated, did all cahce refreshes in SXI_Cache, CPA delta and full cache refresh.
But still it shows up the same error message.
Can you guys tell me whats bad going on with my scenario?
Appreciate your help,
Venkat.

Hi Venkat,
From this line:
It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
It seems there might be a problem in RFC Adapter. Can you see the error in Communication channel Monitoring what error it is showing. Probably the communication between PI and SAP might be a problem. If you put the error here, somebody might be able to help you out.
Regards,
---Satish

Question on BPM Transformation for File- RFC- File

Dear All,
I did the scenario from a blog ( http://www.sap-xi.com/sap-xi-scenario-file-rfc-bpm.html ) which is file->RFC->File with BPM. RFC call happening in BPM which is Sync and they are not using a transformation step anywhere in BPM. can you please explain me how mapping has been performed in BPM for this scenario.
BPM Design:
Start->Receive->Sync->Send->Stop
Thanks & Regards,
Manikandan

Suprised to see this from you raja..
to better the performance of a BPM it is recommended to keep all the mappings in Interface Determination and not in BPM.....but in some cases it is required to have mappings within BPM.
they are not using a transformation step anywhere in BPM
Either mapping was not required or the same was included in Interface Determination.....it is not a compulsion to have a Transformation step.....i have not checked the blog but this should be the reason.
Edited by: abhishek salvi on Feb 21, 2011 6:42 PM

For File -- RFC-- File scenario want to remove sync/async bridge

For File -- RFC-- File scenario want to remove sync/async bridge
Can I work with File -- RFC-- File scenario without BPM
Regards

Hi-
Check this threads
RFC -> File without BPM
File - RFC - File without a BPM - Possible from SP 19.
File-To-RFC without using BPM

File-RFC-File-File not getting deleted.

Hi all,
In File-RFC-File scenario i have used "Delete" as the processing mode for Sender file adapter.RFC was execured successfully and successful message was shown in SXMB_MONI.But at the same time there was an exception thrown in sender and receiver file adapters as given below:
Error when getting an FTP connection from connection pool. com.sap.aii.af.service.util.concurrent.ResourcePoolException:unable to create new pooled resource : FTP Ex:User piuser cannot login.
Both the CC's werein error status.
The file from source location was not deleted even after the successful processing of the message in moni. Because of this sender file adapter was reading the same source file again and again which created multiple response entries in the moni.
Could some one tell me why the file was not deleted from source location?How can the sender adapter read the message again when the above exception was thrown?
Regards,
Lekshmi.

HI Lekshmi ,
Check whether PIUSER has sufficent authorization ., Delete that channel and create a dummy one to test and see whether
you are getting the same error
Check this threads a similar discussion is going on here , may be you need authorizations .
Re: com.sap.sql.DuplicateKeyException in file sender adapter
Re: Processing mode - DELETE not working in Synchronous mode (File - RFC - File
Regards
Ninad

JDBC-RFC-JDBC without BPM

Hi
I have JDBC-RFC-JDBC Scenario.Now i have complated JDBC-RFC part but for the RFC response i dont want to use BPM . We are on PI 7.0 SP 11 . What changes needs to be done in module level to achieve this .
Regards
Vijay

Hi bhavesh,
But In your one of the thread File-RFC-File scenario
These steps are mentioned , is it required in my JDBC-RFC-JDBC Scenario???
4. We need to add a few modules in the Sender File Adapter.
Go to the Modules Tab of the Sender File Adater, and add the following modules in the same sequence,
Number - ModuleName - Type - ModuleKey
1- AF_Modules/RequestResponseBean - Local Enterprise Bean - 1
2- CallSapAdapter-Local Enterprise Bean - 2
3-AF_Modules/ResponseOnewayBean-3
Parameters
ModuleKey - ParameterName - ParameterValue
1 - passThrough - true
3-receiverChannel - Receiver File Adapter Name
3-receiverService - Receiver Business Service/ System
Regards Vijay

Processing mode - DELETE not working in Synchronous mode (File - RFC - File

Hi ,
I need to the delete the files from source folder once the processing is done, so i am giving the Processing mode as Delete in the Sender C.C.
But after execution it doesnt get deleted. what could be the reason?
We are using a file - RFc - file scenario.
also could anyone let me know what is the command to move a file from one folder to another in UNIX.
i tried
mv /home/out but it doesnt work
pls help.

Hi,
you can use AL11: navigate to the folder, where the file is inside, mark it and press button "Attributes". Then look to value "Mode": 777 means owner, group and everybody else has right for write (in your case delete), read and execute. UNIX command to change is may be ch mod (i m not good in UNIX).
My suspect is that the file adapter user has not the right for write, but ur direct user has.
Regards,
Udo

File-RFC-File SLD configuration

Hello everybody!
Currently I'm trying to create a File-RFC-File scenario. So that request from file is send to RFC and after that the RFC response is written to file. I'm following some guides on this topic here on sdn. So I'm almost done with ESB and IB designs but got stuck with SLD configuration. It's pretty confusing to me what software components, business and technical systems should i create for the purpose of my scenario. Could you please explain it step-by-step?
Thanks in advance,
Peter

>>>>>>>>confusing to me what software components, business and technical systems should i create for the purpose of my scenario
You dont need any software component or product is required, since already you are done with those objects.
May be you have used existed sofware component version for creating ESR objects. Okay.
1. You need one business system for R/3 or ECC
2. Juss get into SLD and create Technical System and Business System (If not yet available for R/3 or ECC)
3. As you have completed ur ESR, you can get into Configuration part
4. Choose - Communication component with out party
5. right click and assign business system (if R/3 or ECC is not yet assigned)
6. For File - you can go business service
That's it.
Regards
Pothana

Error in File-RFC-File Without BPM

Similar Messages

Maybe you are looking for