Error in Fiscal year close for assets

Hi All,
I did AR29 / ABAWN (revaluation of Assets). But SAP gave me error as
Diagnosis
The fiscal year 2001 is already closed for area 90 in company code 1000.
Procedure
Check the depreciation area specifications in Customizing.  If the specifications are correct, use a transaction type that does not post to the depreciation area mentioned above.
In the AR29, i mentioned all date as 01.09.2009.
Then i tried posting asset Acquisiiton (in F-90) in same date & it passed the entry. So i do not know what period is closed & why its showing as year 2001 in error message.
Edited by: Deepak Agrawal on Oct 12, 2009 10:33 AM

In OB52, open periods (for A, K, D, + , M, S) are shown as:
From 01 / 2009 To 12/2010. special period is open from 13/2009 to 16/2009.
This mean 2010 is open for the posting entries
But why its allowing me to post F-90 (asset acquisition entry in 2009) & not allowing revaluation of assets.
Edited by: Deepak Agrawal on Oct 12, 2009 11:14 AM

Similar Messages

  • Get error in AJRW - Fiscal Year change for Assets

    Dear Expert!
    I am facing with the following problem when run AJRW in Test Run mode.
    Company Code: 1000
    Fiscal year: 2010
    Fiscal year change statistics - Test Version
    Status    Company code    Read.....   Already changed.... To change.... Incorrect..... Without values..... Already deactivated....
    (Those above column content is all blanked)
    And in "Error log" button
    Fiscal year change requested for the past (Message type error)
    Problem class very important with log number 00000000000003117262
    The current asset Fiscal year in OAAQ & OAAR is 2009, user already posted depreciation for 01/2011 & 02/2011. And they can't execute AJRW to close old fiscal year (FY 2010).
    I am new in Asset Accounting Module. Any suggestions will be greatly appreciated with points.
    Best regards.

    Dear:
                   Please try to run AJAB online in test mode and then in production run for 2010 and then run AJRW.
                    Regards

  • Error when closing fiscal year 2010 for fixed assets

    I was performing year end close for asset management using TCode AJAB and received an error that one asset has not completed posting depreciation for 2010.
    When I looked at the asset that was causing the error I noticed there is still remaining "planned" depreciation for the year 2010.  Apparently, there was some subsequent cost added to this asset after December 2010 depreciation was posted.
    Can I process depreciation again for December for this one asset?  If so, what Tcode would I use?

    Hi
    You have to execute repeat run in AFAB for DEC 2010 and then try to close using AJAB.
    REgards
    Malathi
    Edited by: malathi_u01 on Feb 9, 2011 9:09 AM

  • Error FGV002: Fiscal year variant & is not maintained for calendar year &

    Hi all,
    I am facing a unique problem in BW production. This is not happeneing in my Development.
    Whenever I goto table    "/BI0/SFISCPER" or do F4 on any Fiscal Year / Peiod field, I get the message " Error FGV002: Fiscal year variant R1 is not maintained for calendar year 2005"  . In my client R1 is Shortened Fiscal Year.  But we are not using this for year 2005 and most years. And the message is Type Error. I tried to debug but the code enters in 100 odd Function Modules and does not give any answer.
    My Finance Person has checked the settings in transaction SPRO > SAP Reference IMG > BW Customizing Implementation Guide > Business Information Warehouse > General BW Settings > Maintain Fiscal Year Variant). They are exactly identical to R/3 production setting.
    I have already done rebuild of Fiscal Year Variant from Source System by right clicking and loading data again.
    I am using BW 3.0B with Bi Content 3.1 . Please advise urgently.

    Hi TCS
    Please check these SAP notes in advance:
    1619823
    1835628
    Please advice if this helps.
    Regards
    PC

  • Fiscal year change for AA

    Hello All,
    I have uploaded my legacy assets in DEV client for testing(Transfer date is 31.12.2008)
    After uploading, i'm going to check the balances through AR02 report in the FY 2009, but it is giving below error message
    Fiscal year change not yet made for company code XXXX
        Message no. AB059
    Diagnosis
        You have not yet carried out a fiscal year change for company code XXXX,
        although the current system date is in the new fiscal year.
    Procedure
        Carry out the fiscal year change for company code XXXX.
    I know we can't open more than two FY's in AA, but what can be done for the uploading assets(Transfer date 31.12.2008).
    Can we close current FY in AA module which is 2011?
    Please advice me.
    Rgds
    Murali. N

    Dear Rajesh,
    Thanks for the reply.
    First of all please tell me
    My system date is in the FY 2011, and I am checking the report for the FY 2009.
    I heard, only we can open two fiscal year in AA.
    So, is it possible for me to check the balances in FY 2009 through AR02.
    Is there any way to clost the FY 2011 in AA, so that I can work in FY 2009 & 2010.
    Please guide me.
    Rgds
    Murali. N

  • Fiscal year close

    Hi all,
    after depreciation run in AFAB, the log showing with red colour and listed some assets. the message no is given AAPO504.
    when went for aw01n of listed asset, the system is giving error message "Fiscal year 2004 is already closed in Financial Accounting".
    where i open this year? and now the fiscal year is 2007, not 2004. why the system asking previous year? and what is the solution or t.code for this?
    Thanks,
    Soma

    Hi,
    yes there is no problem if you have the AA opened.
    But I would also start the AJAB. And if there are any changes to do I would re-open it.
    Reason: If you do any changes in the AA master data (like changes of the depreciation key) with the result that the despreciation will be recalculated; you will have the problem that the system will calculate them starting last year; therefore you will get some posting for the last year which you don't want.
    Therefore I would change the AA-year.
    Best regards
    Volker

  • Error on fiscal year change

    Hello Experts,
    I have done fiscal year change (AJRW) for fixed asset on 1st april 2015, I have not done the asset year end closing, as we still have many more entries to come for the year 2014-15. When the fiscal year change has been done, there is no error and it went smooth. But not when I try to post the entry with transaction "ABGL" or "ABGF" I am gettin error that "You cannot post to asset in fiscal year 2014", "Fiscal year chage has not yet been performed"
    But the fact is I have completed the fiscal year change for the assets successfully. Just to confirm, the "OAAQ" will change the fiscal year after after running "AJAB" correct?
    Please advise...
    Regards
    Shailesh

    Hi,
    According to me for Asset Accounting, 2 fiscal years can be kept open at same time, Now in your case, I understood that FY 2015 you have opened through AJRW but you have not closed the FY 2014. Can you kindly check that in T-Code OAAQ which Fiscal Yeart system is showing and also in Table T093C enter your company code and in that which Fiscal Year system is showing. As in OAAQ we can get information for last closed FY which should be 2013 and in T093C Table we get the FY which is the latest opened FY which should be 2015 in present case.
    Regards,
    Malhar.

  • Error in Fiscal Year Change

    Hi,
    i am trying to change the Fiscal year of Fixed Assets in AJRW. however some of the assets are showing error as below.
    Asset 442525-000 in Co code ABC : Error in Fiscal Year Change.
    Message No. AA707
    Diagnosis
    The fiscal year change in asset has produced an error.
    System Response
    No fiscal year change will be performed for this asset, processing will be continued with the following asset.
    Procedure.
    Determine the error message using the function 'fiscal year change' when displaying the asset values.
    now how to find the error & what are the steps needs to be followed to carry forward these assets to next year.
    please help me.
    Regards,
    Shekar

    Hi,
    I have run said programme in SE38 & it is showing the message as below.
    Incomplete Assets - Detail List                                   Date created: 23.11.2009                                                                               
    No incomplete assets matching your selection criteria were found                          
    in the following company code ABC.
    Please help me to forward the balances of these assets to next year.
    Regards,
    Shekar.

  • FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54

    Hi all,
    I am using Former Budgeting and is configured for Commitment Budget only (not configured for Payment Budget). When I tried posting via GL Document Entry to test FM, I encountered the following error.
    [Message no. FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54
    Diagnosis:
    Posting for the document of value type 54was attempted on a date that has not been opened in FM.
    Procedure:
    To define open item intervals for FM postings, use the following transactions:
    Individual Maintenance of Open Time Intervals
    Mass Maintenance of Open Time Intervals]
    I have already maintained in transaction FMIR.
    The entry is:-
    Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
    9B Commitment Budget/2010//00 All Account Assignment// / /16
    What else do you think could be causing this error?
    Regards,
    Bernard

    Go tcode FMIR.
    Ensure that you both entries:-9A Payment Budget and 9B Commitment Budget.
    Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
    9A Payment Budget/2010//00 All Account Assignment// / /16
    9B Commitment Budget/2010//00 All Account Assignment// / /16
    Regards,
    Bernard

  • Maintain Fiscal Year Varient for PPM

    Dear Expert...
    I want to set the fiscal year variant for April to March.
    I have maintained fiscal year variant V3 periods and periods text. When i am trying to define planning period type during that i am geting an error-Fiscal variant V3 uses periods not supported by pipeline performance mgmt.
    Please suggest me what i need to do for next step.
    Thanks
    SAP User-Montu

    Hi Montu,
    Please refer the below links. It has some useful information.
    Pipeline Performance Management - fiscal quarters
    http://help.sap.com/saphelp_crm70/helpdata/EN/9d/f6a3dbbbd3451f91c57558774c7123/content.htm
    Warm regards,
    Murukan Arunachalam

  • Facing an error in fiscal year variant in analyzer

    Hi Experts,
    Whenever i run a query in analyzer iam facing the following error.
    "Fiscal year variant X is not maintained for calendar year 2008"
    Please suggest on this.
    Thanks & Regards
    Sameer Khan

    Hi,
    You need to maintain the values for the infoobject 0fiscperiod in the BW.
    You can see in the master data table of this infoobject that this value is not maintained there and thats why it is ginving you the error.
    Go to the source system option in the RSA1 right click on your R/3 source system and "Trnsfer global settings"
    here chose Fiscal variant and option update tables.
    and then start the data load again.
    Look for the table
    T009
    T009B
    in the source system and just verify if these table contains the value for error which you are getting.
    Thanks & Regards,
    Ramnaresh .P.

  • Error - No GL account selected for Asset account in Business partner master

    Hi Experts,
    Scenario - While adding A/P Invoice for Asset item, the error "Error - No GL account selected for Asset account in Business partner master Message (3518-13)
    Awaiting your replies
    Regards,
    Sid

    Hi,
    You need to map the control account of that vendor(business partner).
    ->Open the respective Business Partner master data
    ->Under accounting tab
    ->Under General tab
    ->Control accounts (will be indicated with ... button),on opening this
    ->You will be prompted to map the control accounts
                                             ^ Down Payment Payables
                                             ^Assets Account
                                             ^Open Debts
    Here you need to map the Asset account which also must be a control account(control account option should be checked in the chart of accounts).
    Pls do check in the test system,understand the behavior of this account by booking ap invoice and payment,then proceed in the live system.
    Hope this is helpful

  • Projects Release  - Error: Enter a Distribution Rule for Asset without val

    Hi Experts ,
    While Releasing Projects , we got error :
    Enter a Distribution Rule for Asset without a Validity limit.
    Message No : KD059.
    Diagnosis:
    The settelement Profile used requires you to define a distribution rule for asset . For period 005 , 2009 , however not created a distribution rule for Asset.
    We gave checked Settelement Profile , still we are not clear what settings is causes for this error ,
    Please throw some light on if some one come across ...
    Regards,
    Sujana

    check out OSS note 115618

  • Best practice  Error " no fiscal year "

    In best practice Report CR " GL Statment " After updating the data base and entering the parameters , It pops to me error " no fiscal year variant specified " though i run the same query in the ERP with the same parameters and it runs ! 
    And am using Crystal Reports 2008 , version 12.1.0.892 . This Report in SAP BEST PRACTICE

    Did you configure the additional data sources and the BP package itself as described in the BI QUick guide and the Add additional data sources document included in the package?
    Regards,
    Stratos

  • AJAB Error in Fiscal Year Closing

    Hi,
    i have excuted AJAB T-Code & tried to close the Fiscal Year.
    but error showing as below.
    Close Carried Out : No
    Other Error : Yes
    Note : Depreciation / updating of values has errors.
    Please suggest, it is a very critical issue for me....

    Hi,
    There is no option is available as Long Text, in SM37 error messgae showing as below.
    And we are not updating the Insurance Values.                                                                               
    CoCd       Close carried out    Inactive     has errors     not posted     line items   Other error                                                                               
    VSIN            No                        0               0                   0                0                 Yes                                                                               
    01.06.2009         Year-end closing Asset Accounting           2
                                                                                    Display detail
                                                                                    CoCd             Asset                   Note
                                                                                    VSIN     260300012105-0000      Depreciation/updating of values has errors

Maybe you are looking for

  • Enclosure sign in FTP receiver

    HI How can i output text strings with enclosure sign " when i use the Content conversion in file adapter. Like this: "text string";1234;34;"another text" "text string";2234;33;"another text" "text string";3234;32;"another text" Regards Jakob

  • What do I do if I don't know what my restriction passcode is ?

    what do I do if I don't know what my restriction passcode is ?

  • Unable to burn audiobook to CD

    I have just bought my first audiobook from Audible, downloaded it and it is in my Audiobook folder in iTunes. It plays ok in iTunes. I want to burn it to cd's to use in the car but i don't seem to have the facility. Any views please. Note i do not ha

  • Sharing--how can I transfer iTunes from Macbook to iMac?

    I use my iMac as my "main" machine and storage place, but occasionally download iTunes from my Mac Powerbook. I've set the the sharing settings so that my Powerbook says "share my entire library" and my iMac says "look for shared library" (I don't wa

  • Vonage Adapter on Network Magic Pro goes offline for no reason

    1. Network Magic version: 5.5.9195.0-Pure0 2. Internet connection via Texas Communications in Bryan, Texas which is line of sight tower transmission to the dish receiver (modem) on my home. http://www.tconline.net/default.htm 3. Texas Communications