: error in FORMS6i help system

i write to inform you that i found an error in ORACLE's FORM6i
it occurred in system varibles index
SYSTEM.CURRENT_VALUE was displayed as SYSTEM.CURSOR_VALUE
PLEASE CHECK TO VERIFY.
if i am right please let me know.

In 6i Patch 10 the entry seems to point to the correct place.
Thanks for taking the trouble of letting us know though.

Similar Messages

RoboHelp Server 7 Help System Errors

Whenever I publish my RH 7 Help project to server, I check
the RoboHelp Server Web Administrator for errors. I always get Help
System Error "Requested file cannot be found" for a file called
bsscfp.txt. To my knowledge, this is a control file generated
during the publishing process. If this is the case why is an error
being generated for a file I have no control over? Also, I find the
Troubleshooting section of RoboHelp Server Web Administrator to be
rather useless in correcting issues. Is there any reference
documentation that explains some of the cryptic error messages that
appear in the Server Web Administrator screen?

Hi, ouque and welcome to the forum.
Just to clarify your setup. When you say "Project pane" are
you referring to the Configuration Manager on the server itself.
Or, are you referring to something you are seeing from the RoboHelp
authoring client app's Server Administration pane?
If you have access to the actual server desktop and view the
Configuration Manager, sometimes on a new installation, you can do
a "refresh" and the project will show up.
A few more questions:
Have you tried accessing the website and does the project
come up in the web browser?
On what kind of web server did you install RHS7? Windows
2003, etc.?
Is Microsoft Indexing Services turned on?
Apparently you were able to successfully publish your project
to the server so there is "communication" between your desktop and
the server I gather.
A few more details and we'll try to help.
Thanx,
john

Hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore...

Help system error message

Using Mac Indesign 3.0 (first version of Creative Suite), the Help system has stopped working. All I get is: "There is a problem with the Help system. Please rerun the installer." Re-installing does no good. Need help!
No recent changes on the computer, and Photoshop's Help system still works. Using an Intel iMac with OS X 10.5.6, 2 gigs ram, ample harddrive space.

Sure someone can. Usually guy, who would know how to turn off your computer or network firewalls. If you do know how to do that yourself, do and see if that helps.

Error message "Live file system repair is not supported."

System won't boot. Directed to Disk Utility to repair but get error message "Live file system repair is not supported." Appreciate all help.
Thanks.
John

I recently ran into a similar issue with my Time Machine backup disk. After about 6 days of no backups - I had swapped the disk for my photo library for a media project; I reattached the Time Machine disk and attempted a backup.
Time Machine could not backup to the disk. Running Disk Utility and attempting to Repair the disk ended up returning the "Live file system repair is not supported" message.
After much experimentaion with disk analysis softwares, I came to the realization that the issue might be that the USB disk dock wasn't connected directly to the MacBook Pro - it was daisy-chained through a USB Hub.
Connecting the USB disk dock directly to the MBP and running Disk Utility appears to have resolved the issue. DU ran for about 6 hours and succesfully repaired the disk. Consequently, I have been able to use that Time Machine disk for subsequent backups.

Portal Runtime Error while creating new system in portal content

Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file

Hi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists

Hi there,
I am getting the following error in SharePoint 2007 site.
Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists.
Show Error Details
Hide Error Details
[WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem persists.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.RethrowExceptionIfNeeded()
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Guid guid)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
There is no event logged related to this error. I have checked ULS log and nothing much I can find over there.
Any help would be highly appreciated.
Thanks,
Puli
Puli Bala

It is not only because of unsafe controls. Please refer the articles below.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2008/09/24/safe-mode-did-not-start-successfully-request-failed.aspx
http://blogs.edwardwilde.com/2009/12/22/safe-mode-did-not-start-successfully-could-not-load-file-or-assembly/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/6d81f7b0-33c5-482b-b7aa-9f639c784dea/what-reason-can-cause-the-errorerror-failure-in-loading-assembly-microsoftsharepoint?forum=sharepointadminlegacy
https://paulsiu.wordpress.com/2008/07/24/sharepoint-loading-assembly-error-in-the-event-log/
Puli Bala

Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE

Hi All,
I am getting Error when i am viewing my salary slip in ESS.
The Error i am getting is :
Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE
So can anybody help me out in this.
Regards,
Dhruv Shah

Solved the Error by deleting the spool in the Backend.
Spool was overflow.
Regards,
Dhruv Shah

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

MSS Iview error - Any body help me - Very urgent

Hello All,
I've configured ESS BP in my Portal successfully and it's running perfectly fine. Now i've imported MSS also without any problems. Now the issue is when i'm launching the My Staff iViews it gives me a message "Could not connect to the R/3 System" . These iViews using the system object "SAP_R3_HumanResources" which has been used by the ESS iViews also. Now ESS iViews are working fine with the same system object but MSS iviews are giving me the error message.
My System landscape :
MSS BP Installed: BPMSS601_19-20001489
R3- 4.6C
Portal : EP6 Sp11
WAS: 6.40
Any help will be highly appreciated.

Hello All,
I've configured ESS BP in my Portal successfully and it's running perfectly fine. Now i've imported MSS also without any problems. Now the issue is when i'm launching the My Staff iViews it gives me a message "Could not connect to the R/3 System" . These iViews using the system object "SAP_R3_HumanResources" which has been used by the ESS iViews also. Now ESS iViews are working fine with the same system object but MSS iviews are giving me the error message.
My System landscape :
MSS BP Installed: BPMSS601_19-20001489
R3- 4.6C
Portal : EP6 Sp11
WAS: 6.40
Any help will be highly appreciated.

Error in local message system; message 009999000035 not complete

Hello All.
I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
and SAP_SV_FDB_NOTIF_BC_CREATE.
However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
I have also checked for Product_ID parameter which is not existing.
One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
So, this shows clearly that it is an issue with role/authorization.
Please suggest me !!
Thanks in advance.
Regards,
Satish.

Hmm not really. Profiles for the roles are also generated?
Those roles/profiles should be sufficient to create support messages.
Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04?

Error while releasing PO : System error: block object EKKO, Key PO Number.

Dear All,
I am getting error while releasing PO : System error: block object EKKO, Key PO Number.
Please help to resolve.

Hi Friend,
How the issue is resolved, because i am facing the same issue, while positing Service entry sheet.
If you can give us solution, it will be more useful and more appreciated
REgards
RS

Error in Local Message System: RFC destination MB3AP1039 does not exist.

Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
Can anyone help me in resolving the above issue.
Thanks & Regards,
Mirza Kaleemulla Baig.

Dear friend
You have to of following option
1.Define Service Desk destination in the R/3 systems:
Note: for this you need to log in the R/3 system.
Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
2.a. Go to transaction SM30.
b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
c. Press the Continue button in the following screen:
d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
e. In the next screen, enter the following information:
In the RFC Destination you should point to your Solution Manager destination RFC.
0ss_msg w sm_bsmclnt_back cust620 1.0
shailesh

Error in external tax system: SAX processing failed on input stream SAX pro

Hi
When I was posted in T.Code: FB70, (Customer Invoice) I am getting below mentioned error.
Error in external tax system: SAX processing failed on input stream SAX processi.
I put tick mark on calculate Tax column and select O1(A/R Sales Taxable).
Pls. help me.
Thanks
Ranjith

Hi Ranjith,
I also face this problem in Production now.
Could you kindly share with me how you resolved this issue?
Thanks,
Markus

: error in FORMS6i help system

Similar Messages

Maybe you are looking for