Error in forms6i when running in web
hi,
I do have a problem in running a form in the web. all forms that we did, just went fine but this form is very different, it is running fine in client/server, but when we transfer it in web, the window automatically minimizes, and when you maximize it, all the items are disabled,this is just one form, but the other forms that we compiled and running ok in the web.. if you have any ideas, I really do appreaciate it.
thanks
Lilibeth
Lilibeth - sounds very strange since all other Forms are ok.
Here is what I would do:
Either take the Forms and start removing code/triggers/items - a few at a time to see if the problem is related to a specific
item:
OR
Create a brand new Form and start to drag and drop items into the new Form from the "old" form. When you start getting
the problem again you know that the last change was the issues.
Hope this helps.
Regards
Grant Ronald
Forms Product Management
Similar Messages
-
"Unspecified Error" is displayed when running a webi report 10 minutes
We are in BOXI R2. I run a long running WebI report. After 10 minutes, I receive a popup that says "Unspecified Error". We have changed the CMC Webi Report Server Setting but we are still having the issue. Any help is appreciated.
Good afternoon Ann,
We are experiencing the same problem. Would you able to disclose what value that you have changed to?
Regards,
Jos -
Getting the MDX query select error when running a webi report on BI query
Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
JeethenderThe Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2. -
RW-50004: Error code received when running external process.
Hi,
I am trying to install 11.5.10 on windows vista and receiveing following error.
RW-50004: Error code received when running external process. Check log for details. Running Database Install Driver for VIS Instance
When checked on the log file following is the error. Could anyone pls help me with this regard
There was an error while running the command - c:\OracleApps\visdb\9.2.0\temp\VIS_erp\adrun9i.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.
"dbInstancecfg" file shows below error
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=erp.erp)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 13-JUL-2008 05:48:04
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
addlnctl.cmd exiting with status 3
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
System error 1060 has occurred.
The specified service does not exist as an installed service.
.end err out.
File c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit_inst.cmd not instantiated in the current pass, this file will not be executed
Executing script in InstantiateFile:
c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit.cmd
script returned:
Sun 07/13/2008
05:48 AM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1Thanks for the update and the link was informational.
Can I install following on windows vista? Pls confirm.
Oracle® Applications 11i Release 10.2 Media Pack for
Microsoft Windows (32-bit) No That's not possible, if you would like to use this machine for Applications then the OS needs to be changed or install vmware/Microsoft Virtual PC with a Certified Operating system to be able to use Applications.
Thanks
Ronald -
Error has occurred when running internal order report
Error has occurred when running internal order report. Last month also used this report without any error.
Error #01: [ASE Error SQL422]Too many nested expressions or logical operators to compile. Try splitting query or limiting ANDs and ORs.
Error #02: SQL Error: 422
Error #03: An error occurred while reading the data; Navigation is possible.
Please guide me to solve this issue.Please just say how you removed the CC version and did you remove the Preferences from Hidden User>Library??
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
In here??
Sorry I'm trying to help but please answer the questions specifically... thanks. -
Error when running P6 web services Demo
Hi All,
I am trying to run P6 web services demo application, p6 web services server is running, however I get this error when running the demo application:
org.apache.cxf.service.factory.ServiceConstructionException: Failed to create service.
Appreciate if someone can help me to resolve it.
Thanks in advanceIf you are getting this error, then you are most likely compiling your code with a different JVM than what is shipped with the application server. Oracle9iAS Release 2 (9.0.2) uses the JDK1.3.1. I got this error when I compiled the code with JDK1.4.0_01.
-
Error when running the Web Services java client file
Hi,
I am working on web services with 9iAS.
I am using the StatelessExample file included during installation.
The ear file was created and the application was deployed using OEM Web.
But when I try to execute the client java file StatelessClient. I get an error. The error is something about content type.
The error message is pasted below.
And also how do I run the web service on the browser.
Please help.
regards
Kamlesh
D:\ora9ias_portal\j2ee\home\demo\web_services\java_services\client>java -classpa
th .;StatelessExample_proxy.jar;%CLASSPATH%; StatelessClient
Exception in thread "main" [SOAPException: faultCode=SOAP-ENV:Protocol; msg=Unsu
pported response content type "text/html", must be: "text/xml&quo
t;. Response was:
<HTML><HEAD><TITLE>500 Internal Server Error</TITLE><
/HEAD><BODY><H1>500 Internal Server Error</H1><PRE>or
acle.j2ee.xanadu.JasperGenerationError: no source generated during code generati
on!: 1 in getFile name: oracle\j2ee\ws_example\StatelessExample.class
<br>1 in getFile name: oracle\j2ee\ws_example\StatelessExample.java
<br>error: error message 'class.format' not found<br>binar
y class definition not found: oracle.j2ee.ws_example.StatelessExample
<br>
<br> at oracle.j2ee.ws.JavaWrapperGenerator.generate(JavaWrapperGener
ator.java:267)
<br> at oracle.j2ee.ws.RpcWebService.generateWrapperClass(RpcWebServi
ce.java:662)
<br> at oracle.j2ee.ws.RpcWebService.generate(RpcWebService.java:436)
<br> at oracle.j2ee.ws.RpcWebService.getWrapper(RpcWebService.java:76
7)
<br> at oracle.j2ee.ws.RpcWebService.doPost(RpcWebService.java:309)
<br> at javax.servlet.http.HttpServlet.service(HttpServlet.java:283)
<br> at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].serv
er.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
<br> at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java
:283)
<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].serv
er.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].serv
er.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:2
69)
<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].serv
er.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].serv
er.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util
.ThreadPoolThread.run(ThreadPoolThread.java:64)
<br></PRE></BODY></HTML>
at org.apache.soap.rpc.Call.getEnvelopeString(Call.java:201)
at org.apache.soap.rpc.Call.invoke(Call.java:260)
at oracle.j2ee.ws_example.proxy.StatelessExampleProxy.makeSOAPCallRPC(St
atelessExampleProxy.java:51)
at oracle.j2ee.ws_example.proxy.StatelessExampleProxy.helloWorld(Statele
ssExampleProxy.java:35)
at StatelessClient.main(StatelessClient.java:8)If you are getting this error, then you are most likely compiling your code with a different JVM than what is shipped with the application server. Oracle9iAS Release 2 (9.0.2) uses the JDK1.3.1. I got this error when I compiled the code with JDK1.4.0_01.
-
Report data shows up in Builder but not when run on web
I have a report that pulls up the data just fine when run in Builder but when I run it on the web, it shows up, no errors, with no data...just blank.
I am using a global temp table to do this.
Any ideas on what might cause this to happen?
Thank you for ANY suggestions!!
--KWienHi,
Are you sure you are using all the parameters (that work in Builder) in the URL?
Gicu -
Error Code -61499 when Running an FPGA VI on Develpement Computer with Siulated I/O
Dear Forum
I have a problem with running my FPGA VI on the development Comupter with simulated I/O
I Created a testbench as described in
http://zone.ni.com/reference/en-XX/help/371599D-01/lvfpgaconcepts/test_bench_tutorial/
This works fine. I can read an write the I/O Nodes
But when I insert a read/write control node (from the FPGA interface palette) into my Host-VI to directly write a value to a Control on my FPGA VI, i get the error -61499
The error happens in the VI on my Hostcomputer ad the message is:
An internal software error on LabView FPGA Module has occurred. Please contact NI technical support.
The error does not happen, if I remove the read/write control, or if I dont call it.
The error does not happen, if I compile the fpga-vi and let it run on my fpga hardware. It happens only in the simulated mode.
The error happens in the simulated mode when i use the testbench for simulating input Signals, it also happnes, when I use random Input Signals.
It seems that the error does not happen during compilation. The simulated VI runs and the error happens, only when I call the read/write control.
Can anybody help me?
I appreciate every suggestion
Thanks
David
Solved!
Go to Solution.Ok, the problem is solved, thanks to ni support who helped me:
The solution is, not to have spaces and end of lines in the names of frontpannel elements.
In simulated mode, a host-vi has problems to access frontpannel elements of the fpga-vi with the read/write node if the frontpanel elements have special characters. -
Error in BIM when running in background mode
Hi,
I am facing an error when running a BIM in sm35.
The BIM runs fine with my userid in all three modes( foreground,display error mode, background mode)....but fails when the functional person is testing in background mode. The BIM runs fine in all other modes.
It gives the message when running in background mode
"No batch input data for screen SAPLMGMW 4008"
What should I check or do to correct it.
Please help.
Regards
RashiThe BIM runs fine in Foreground mode and in Display error mode even for the functional..It is giving error only for Background mode.
I also did the following
1. Created the BIM in my id and tried running( in background) it using the other id ...it was successful
2. Created the BIM in other id and ran ( in background) using my id....it failed.
I will check again for authorisations also.
Regards,
Rashi -
Error "No Managers" When run Requests
In oracle 11i General Ledger I find No Managers error when run Requests after posting a journal or any other task. So I deactivated the Managers and Try to activate again. But the activate option is in not active. I am not able to update sleep cycles and no prograrammes to run.
Please help me any one.Hi again,
Do you have a putty connection to access oracle directories?
If yes, use Putty and logging as appsuser.
Go to location
# cd /COMMON_TOP/admin/scripts (or $ADMIN_SCRIPTS_HOME)
1. Check status of concurrent manager
sh adcmctl.sh status apps/appspswd
2. Shutdown the concurrent manager
sh adcmctl.sh stop apps/appspswd
2. Start the concurrent manager
sh adcmctl.sh start apps/appspswd
If you still having trouble with this, please inform your DBA regarding this issue.
HTH,
Vik -
QUERY when run on WEB and RSRT then RRI show selection screen on receiver.
Hi,
We have two query: Query 1 and Query 2.
Query 1 can be RRI to Query 2.
The variable for fiscal period and Forecast version are both mandatory. The selection for plan version is optional.
When run this on BEx Analyzer, the jump work smoothly without pop-up of selection screen of the receiver query.
However, when run on RSRT and Web, the selection screen is being pop-up and you need to press execute button before the 2nd query will be shown.
The value of the variables is pass correctly.
Fiscal Period on 1st query is being restricted by two variables.. one interval variable on Free characteristics.. and one single variable on restriction of key figure. The single variable is the one exist and passed on the 2nd query.
Hope you can help me.the only thing i can think of on the wbe is a setting for opening windows in tabs or open new window under tools for rsrt not sure, did you try to run it in HTML in rsrt?
it could be setting in SPRO for reporting worse comes to worse open a note with sap. -
Report output directly to printer when running on web
I am using Forms 6i & Reports 6i to build an application.
I run report from forms 6i using Run_Report_Object (Output to
printer).
It works fine when using Client/Server.
But When on the web the output of report to printer goes to the
printer of the server instead of printer of the client.
I want to print the report from the printer of client who
requested the report directly.
Please help me out.
Thanks
ZulqarnainStephen,
use destype=printer and desname=<network printer>. The format by default is set to postscript.
Frank -
Runtime error ora-12703 when running utl_mail
hello,
I call a procedure through push button to use UTL_MAIL.send(..) and I got error ora-12703.
There is no error during compilation.
For your info, I manage to execute the same code on stored procedure using TOAD and I received the email sent using TOAD and telnet from my local.
For info:
Forms developer version:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
procedure:
PROCEDURE test_email IS
BEGIN
UTL_MAIL.send (
sender => '[email protected]',
recipients => '[email protected]',
cc => '[email protected]',
bcc => '[email protected]',
subject => 'Test',
MESSAGE => 'Hello World',
mime_type => 'text; charset=us-ascii',
priority => 3
END;
Could anyone please help me on this.
Regards,
DayangHi All,
I tried another function that use utl_smtp to send email.
Again I could recieve email when I execute the function in TOAD but got error ora-12703 when I ran using forms.
When I ran the form, only "debug 1st" apear, then after that it returned error ora-12703.
Function:
FUNCTION SEND_MAIL
(pIssuer IN VARCHAR2,
pReceiver IN VARCHAR2,
pSender IN VARCHAR2,
pSubject IN VARCHAR2,
pMessage IN VARCHAR2) RETURN VARCHAR2 IS
c utl_smtp.connection;
respuesta utl_smtp.reply;
pServer VARCHAR2(50) := '10.0.3.79';
CRLF CHAR(2) := CHR(13) || CHR(10);
BEGIN
message('debug 1st');
-- Abre la conexión al Server de correo
c := utl_smtp.open_connection(pServer);
message('debug2nd');
respuesta := utl_smtp.helo(c, pServer);
-- Inicia el Issuer del correo.
respuesta := utl_smtp.mail(c, pSender);
-- Inicia el Receiver
respuesta := utl_smtp.rcpt(c, pReceiver);
respuesta := utl_smtp.open_data(c);
-- Escribe la cabecera del e-mail
utl_smtp.write_data(c, 'From: ' || pIssuer || CRLF);
utl_smtp.write_data(c, 'To: ' || pReceiver || CRLF);
-- Escribe el Subject
utl_smtp.write_data(c, 'Subject: ' || pSubject || CRLF);
-- Escribe el texto del Message.
utl_smtp.write_data(c, CRLF || pMessage);
utl_smtp.write_data(c, CRLF || '.');
respuesta := utl_smtp.close_data(c);
-- Cierra la conexión
respuesta := utl_smtp.quit(c);
RETURN '0';
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
utl_smtp.quit(c);
RETURN sqlerrm;
--raise_application_error(-20000,
-- 'El envío del email ha fallado devolviendo el siguiente error: ' || sqlerrm);
END;
Regards,
Dayang -
Getting error "Access via null" when running the web dynpro application
Hi experts,
I am getting the below error while executing my web dynpro application
500 SAP Internal Server Error
ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE)
I am getting the error only when I am calling a method create manufacturer from my web dynpro program. If i comment this code my application works fine
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
gi_manufacturer = ls_manufacturer
IMPORTING
lv_message = lv_status
i have created a attribute mo_ch_instance of type YSRM70CL_CH_SW_MD where YSRM70CL_CH_SW_MD is the class which has the create_manufacturer method that i am using in my code.
Kindly let me know whats the issue.
Regards,
VinodHi,
if wd_this->mo_ch_instance is not initial.
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
gi_manufacturer = ls_manufacturer
IMPORTING
lv_message = lv_status
endif.
Check wether you have created the object for that class r not.
Regards,
Lekha.
Maybe you are looking for
-
MB5B - Stock on posting date doesn't show Storage Location field
Hi All, I run report MB5B - Stock on posting date with Stock Types = Storage Loc/Batch Stock, but the report doesn't show Storage Location field in result. How can I see it in this report? Thank you very much for your kind support! Cao Huy.
-
How take variable value in WAD 7.0 from query
Hi experts, We have some queries with the same type of data but with different structure. All have the same variables entry and we want to execute through WAD one of them based on the values entered in the variables screen. Could you help us saying h
-
Io exception: Connection timed out during Active Sync
I received this connection exception during an Active Sync Process. The exception caused the process to halt for 9 minutes - it then picked again and continued processing accounts. We are running IdM v5.0 SP6, Tomcat Application Server, and an Oracle
-
hi all bit of a flat panic now, i was going to use IDVD to burn my project off to give to a customer but the videos have been exported in 16:9 from FCP but will only play in QT in 4:3 same for Idvd so i tried to open the project in DVDSP but it wont
-
SunFire V40Z does not boot from DVD - suggestions and Tips?
Hello, I got 2 SunFire V40Z servers from another datacenter. I got them racked and powered up and configured the Service processor and I can access the Sp remotely as well. I am trying to install Solaris 10 on it, but it seems like the system doesn't