Error in FTXP -Calculation procedure not maintained correctly for level 000

Hi Guru
I am creating a new tax code A7 through trx. FTXP. It is a copy of another code A1 and only percentage needs to change for eg. from 60% to 25%.
After changing while saving i get error - 'Calculation procedure not maintained correctly for level 000 Message no. FS789'.
Could you please help me to understand why i get this error while i am only copying an existing tax code A1 and just changing the %.
Thanks
Reg
SAPasmita

Hi ,
Go to tcode OBYZ Then select procedure  select the appropriate procedure defined for your company code and then select the control data  in the control data tree  there will be different step first step will be
step   description                              from  to
100    base amont                           
110    rounding down output tax ,    100
  120  round off input tax
then in the round down output tax  in FROM column mentioned from which step the output tax be rounded an exampleis  provided  for better understanding.if the from is not mentioned the error will appear

Similar Messages

  • Error: Lock profile for approval procedure not maintained in Customizing

    Hi,
    We are working on the CHARM approval process. I have noticed that without selecting an approval procedure, I select the status (Awaiting business approval) on which the approval workflow is triggered, the system gives below error:
    Select an approval procedure first
    Lock profile for approval procedure not maintained in Customizing
    Approval procedure and approval steps are locked automatically
    This locks the approval procedure and the RFC can no longer be processed further. Why is that happening ? Anyone can select the status by mistake and lose the RFC, is there a way to stop this or at least reset it ? the lock procedure is already maintained in approval procedure customizing.
    Best Regards.

    Hi Karthik,
    Thanks for the quick reply, however the settings mentioned on page 38 are already in place i.e. the approval procedure gets determined correctly based on change category (rule policy) and also is locked after putting it to 'Awaiting Approval' 
    But the problem exists - setting the status 'Awaiting App.' without selecting app.proc, will result in a total lock of the RFC.

  • Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

    Hi Gurus,
    When I try to capture deemed export license from J1ILIC01 I get this error
    The number range is not maintained for Object/Year: J_1ILIC/
    I tried to maintain number ranges in SNRO & SNUM  there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

    Hi
    Just check if you have maintained number range for the correct year as shown in error.
    Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

  • ITunes stopped working on Windows 8. Error message 7: iTunes was not installed correctly.

    I have Windows 8. Originally iTunes worked fine, then it couldn't update (said it was unsuccessful). Then it stopped working, so I (after much research) tried a long and tiresome method of removing all Apple products and re-installing them. I did this 3 times and it eventually worked and has been working fine for a few months. Recently, when trying to update, it has said "update successful", but when checking for new updates, finds the same one it supposedly just installed, wanting to install it again. For a few weeks now it has not worked at all, saying "error message 7: iTunes was not installed correctly" when I attempt to open iTunes. I can't bring myself to go through the whole process again of uninstalling and reinstalling everything, it took hours and it clearly doesn't solve the problem. I have no idea what the problem is. Reinstalling only iTunes doesn't work. The support pages have no advice available for my crappy version of Windows.
    Please help me!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    It shouldn't really take that long to do, assuming it goes smoothly.
    tt2

  • Error message saying "iTunes has not been correctly localized for this language"

    When trying to launch iTunes I'm getting an error message saying "iTunes has not been correctly localized for this language.  Please run the English version"?  Any suggestions are much appreciated and thank you in advance!

    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • HT201210 iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly

    iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly".  I also tried to downloadiTunes 11.1.4 at th Apple website and that did not work either-It stalled with an erro message that stated the "mobile service" would  not open HELP!

    Hi Doug! I was having the same problem but after reading a lot of answers I found the solution. First of all you need unistall ALL THE SOFTWARE OF APPLE from your computer, I mean BONJOUR, QUICKTIME, ITUNES, APPLE SOFTWARE UPDATE, APPLE MOBILE DEVICE SUPPORT and the other one that is from compatibility with apps of apple, after that you must verify if this folders are removed if they don't then remove it:
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple\
    C:\Program Files\iTunes\
    C:\Program Files\iPod\ 
    If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed: 
    C:\Program Files (x86)\Bonjour
    C:\Program Files (x86)\Common Files\Apple\
    C:\Program Files (x86)\iTunes\
    C:\Program Files (x86)\iPod\
    Then if you have ccleaner you can use it to clean all registers left, then reboot and try to install iTunes 11.1.4 again as administrator... That works for me, I hope that helps you too...

  • Error as no calculation procedure assigned to company code

    Dear Member,
    I am SAP hr Fresher, Im practising in IDES,
    When i create Personal Area iam getting
    Error as no calculation procedure assigned to company code???
    What should i do???????
    Help me out experts.......
    Thanks
    Jose

    Please execute t-code OX02 and assign your company code to the country in which it exists.
    Hope this helps,

  • Measurement Computing USB-SSR24 error 42 Digital Port not configured correctly for requested operation

    Using LV 2012 and ULx 2.02 LV driver:
    LV is throwing an error 42 (Digital Port not configured correctly for requested operation) from the ULx write VI but only on PortCH.  All my configurations are correct on the hardware and Instacal tests the ports OK.  I've reinstalled everything and still see the same issue.
    Since PortA is configured identical to PortCH, and PortA is functioning fine, I'm stumped.  This is occuring on two different SSR24 DAQs so I don't think it's the hardware, plus I've already mentioned that the Instacal isn't having a problem with it.
    I've attached my VI I'm using for debug. 
    Jeff
    Attachments:
    test of Wilmington.vi ‏19 KB

    I worked with Measurement Computing and they agreed that there is a bug with certain DI/DO configurations.  There are a possible 16 different DI/DO configurations with the hardware and apparently mine (PortA - DO, PortB- DI, PortCL-DI, and PortCH-DO will throw this error for PortCH.  I'm currently using .net calls to work around the issue until the ULx driver is updated.  I'll post that when I see it.  Attached are the .net VI's that I'm using for simple static IO.
    Attachments:
    USB SSR DOT NET Write Bit.vi ‏20 KB
    USB SSR DOT NET Read Bit.vi ‏21 KB

  • Error: property is not set correctly for User Defined Fields.

    Hi Gurus,
    I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
    I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
    Thanks,
    sat

    Hi Kevin,
    I couldnt get it done. This is what I had done so far.
    Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
    Added two field in xlwebadmin.properties & xlwebadmin_en.properties
    lookupfield.header.users.deptcode=Department code
    lookupfield.header.users.deptname=Department name
    In my lookfield properties in
    column caption=Department code,Department name
    Column query= Not sure what to give? here
    Thanks,
    sat

  • Sorting not working correctly for date field in alv report

    Hi All,
    My report displays many rows also containing date type fields of bldat,budat .
    When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
    Ex:
    Invoice doc dat
    01-25-2011
    01-21-2011
    02-02-2011
    10-25-2010
    11-20-2010
    If I use ascending then it is sorted as :
    Invoice doc dat
    01-21-2011
    01-25-2011
    02-02-2011
    10-20-2010
    10-25-2010
    Why the sorting is not working correct for year.(2010 records should have been first).
    The field wa_tab-bldat is of type char10.
    It is populated as wa_tab-bldat = bsak-bldat.
    Kindly suggest what can be done.

    The field wa_tab-bldat is of type char10
    Then what it does is correct.
    Refer to type datum...it will work

  • Error:The grouping element could not be determined for project

    Hi,
    When I am trying to issue goods for a project,I am getting the following error
    "The grouping element could not be determined for project 1., plant 2., and MRP group 3.."
    what may be the reason for this reason.
    Regards,
    Raju

    Hi,
    You are using Automatic Requirement Grouping in your project and there is some issue with the Material Master,please check the Material Master Views.
    Muzamil

  • When trying to share my movie i get a error message The project could not be prepared for publishing because an error occurred. (-108)" pls help

    when trying to share my movie on Imovie i get the following error. "The project could not be prepared for publishing because an error occurred. (-108)"
    any idea why this has happened? How do i rectify this?

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • Times of posts not showing correctly for my time zone

    The times of posts not showing correctly for my time zone ( I am in London UK).
    How do I fix this?
    TIA

    Your stuff>profile>edit preferences
    Barry

  • My photoshop elements12 will not update says error and contact adobe but not open now for help.  windows vista

    my photoshop elements12 will not update says error and contact adobe but not open now for help.  windows vista

    I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
    The Nikon D60 was first supported in Adobe Camera Raw 4.4.
    Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
    If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer?

  • HT1567 I have the volume control symbol in the center of my iPad all of the time.  My music will not play and the volume remains off.  When I try to increase the volume manually it statics and will not maintain a volume level.  Thanks

    I have the volume control symbol in the enter of my iPad all of the time.  My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level.  Thanks

    Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.

Maybe you are looking for