"Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16
While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
"Error in function: Add Table not found [131-183]"
SAP B1, 2005B, PL 39.
It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
This is very urgent kindly help me out.
Edited by: Philip Eller on May 16, 2008 8:50 AM
Edited by: Philip Eller on May 30, 2008 8:41 AM*
Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple
Similar Messages
-
Viewing form in Preview Mode Failed. Error: Table not found [131-183]
Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
Johnhi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q -
Getting idoc error - Entry in outbound table not found- in outbound scenari
hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problemHi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas. -
IDOC Error - Entry in outbound table not found - Status 37
Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
MichaelHi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika -
IDOC error : Entry in inbound table not found
Hello all...
Iam gettin IDCO error when im processing inbound IDOC
(basic type :FIDCCP02 and message type:FIDCC2) like..
<b>"Entry in inbound table not found..."</b>
<b>in diagnosis:
Noinbound partner profile could be found with the following key:
/XXXHUB/LS/LS/FIDCC2//// ..</b>
but:
I maintianed XXXHUB in logical system ( tcodeSALE ) and
in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB and also added message type FIDCC2 with process code FID2 ...
what else need to do/configure?....
let me know if u need more info...thnaks..Thanks guys...for your answers...
there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
so what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
one more thing...
iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
for sender : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
Thnaks.... -
Entry in outbound table not found, Error message no. EO400
I have created Partner profile and include message in partner profile. when i have generated IDOc (we60), that time, it is given error ( Entry in outbound table not found---- Error Msg no. EO400).
Please suggest me solution for the same.
Kunjan shahHi Kundan,
can u be more specifidc about ur requirement.So that i can help u out.What all the configs u have done and what is method ur using for generationg outbound idoc.
Regards,
nagaraj -
Function module "rsxcls_bics_ws_url_get" not found
Trying to build a Xcelsius dashboard directly from a SAP BI query I get an error message.
Installed Software
GUI 710 Patch Level 15
BI Add-on 7.x (based on 7.10) Support Package 11
Xcelsius 2008 Service Pack 2 (o BuildVersion: 12.2.0.608 )
When trying to add a connection of type "SAP Netweaver BI Connection", I select the query but then I get the error message 'Function module "rsxcls_bics_ws_url_get" not found'.
BradHi Brad
you must have at least SAP NetWeaver BW 7.0 Enhancement Pack 1 Service Pack 5 in order to be able to use the BICS interface in XCelsius. What's the exact version of your BW server?
Regards,
Stratos -
Entry in outbound table not found
i am using we19 trying to do standard outbound processing for idoc mbgmcr02
i use receiver Port internal and partner abc01
sender Port -
and partner abc02
in we20 is set up partner
abc01 type ls in outbound parameter area i see mbgmcr
now in 19 when is use as receiver partner abc01 i get the following error
entry in outbound table not found
/abc01/ls//mbgmcr message no 400 id E0
can anyone direct me to what i am doing wrong?????????????????/Hi Janice,
See these..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/71/9bbdde2f66454bb9771170369bae81/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2d/f371e4d24a11d289810000e8216438/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dc/6b80c243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/f0/08ef0d06b111d286e2080009b98822/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
cheers,
Prashanth -
Entry in outbound table not found in PFAC
Good day all.
I'm facing an error "Entry in outbound table not found" when I try to create assignment PFAC (Responsibility Rules).
Any body have an answer to solve this issue?Are you trying to do something related to IDOC/Partner profile related responsibilities?.
-
CF5 Newbie needs help.
I am trying to create a webpage with a searchable access
database that displays photos.
I am getting the message ODBC Error Code = S0002 (Base table
not found). I have verified my database.
Maybe there is a problem with one of my initial files. I have
the search, results and details querry set up am I missing an
additional file here that would cause this problem?
Thanks -any help is greatly appreciated,
JenHi,
pPerhaps one should explain some basics about privileges in the database.
You connected as sysdba, named superdba.
The table(s) you are looking for have been created by the user SAPAJ4DB.
If a user creates a table, noone !!, really noone is allowed to select them except this owner.
Not even the sysdba is allowed to select them.
And it is good that it is like this. I personally do have some private info in tables and do NOT
want to let them being seen by my boss being the sysdba of the db.
If the owner wants to allow access to this table, he has to grant privileges to other users.
There are select, insert, update, delete ( to name the DML-privileges ).
If the owner of the table you are looking for, did not do this, the sysdba is not allow to see them.
And then he will receive the error -4004.
Yes, the table DOES exist. But for the user not having a privileges for this table,
this table looks like not existing, causing this error to occur.
Therefore: connect as the owner, select there what you want.
And then think about your needs and grant the corresponding privileges to other users / the sysdba.
Have a nice weekend,
Elke -
Function module "URL_SERVER_TYPE_DATA_GET" not found
We do get every day follwing dump
Runtime Errors CALL_FUNCTION_NOT_FOUND
Function module "URL_SERVER_TYPE_DATA_GET" not found.
Its happening at particular time. Any clues ? Notes .
SRM 4.0
Appreciate your help
RamanHi,
Pls see the foll notes:
Note 379462 - Menu is not displayed in the browser
Note 674605 - Short dumps when sending mails with object attachments
Note 385353 - Stability improvemnt of URL generation of Launchpad
Also do you have any jobs scheduled for sending emails to external mail from SRM system?
BR,
Disha.
Do reward points for useful answers. -
Error message of "404 - page not found" after downloading and installing Firefox 15
Error message of "404 page not found" after downloading the latest version of Firefox.
This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].
-
Function module "CRM_DOWNLOAD_RCV_EXIT" not found error
Hello experts,
We are using SRM 5.0 connected to an ECC 6.0 backend system
In SRM, trans. SMQ2 I see queues with status SYSFAIL, and inside them I find that supposely the error is "Error in Mapping (Details: transaction SMW01)".
When I re-process it, I get the following dump in ST22: "Function module "CRM_DOWNLOAD_RCV_EXIT" not found". This module does not exist in SRM, and my guess is that CRM is sending stuff to SRM.
I have everything configured correctly, exactly as note # 720819.
I'll appreciate your comments on this.
Regards,
Gilberto GallardoHi
CRS_DOWNLOAD_RCV_EXIT -check this fm you defined in CRMSUBTAB table in r/3
CRMSUBTAB for subscription table for Up and Download Object and add the following values:
User ObjectName U/D Obj. Class Function Obj. Type Funct. Name
CRM empty Download Material empty empty CRS_MATERIAL_EXTRACT
CRM empty Download Material empty empty CRS_CUSTOMIZING_EXTRACT
CRM empty Download Material empty empty CRS_SERVICE_EXTRACT
BR
Muthu
Edited by: Muthuraman Govindasamy on Oct 24, 2008 6:22 AM -
Status 29: Error in ALE service : Entry in outbound table not found
IDoc: 0000000003560240 Status 29: Error in ALE service
Entry in outbound table not found
No partner profile (outbound parameter) could be found using the following key:
/0000000000/LS//YHROT_XXM_IN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Procedure
Please check the EDI partner profiles.
But The IDOC befor this and after this is successfully run.
And even after reprocessing also it is giving same error.
After checking Contorl record, we found that there is no data in receipant Info in Partner Tab.
What would be the issue.
Please suggest.
Thanks & Regards,
MonikaHi ,
Thanks for your reply.
We are using one custom message type.
I would like to give you example of exact scenario.
Suppose my IDOC has large amount of segments then ,
It is dividing as
1st IDOC : Control record ....header and data segments
2nd IDOC : only data segment
3rd IDOc : only data segment
4th IDOC : data segment and Trailer.
In this way, I am getting all my 4 IDOCs in error.
What should be d reason?
your help will be grateful.
Hi Everyone,
any update?
Edited by: Monika.Dhumal on Feb 14, 2012 11:49 AM -
Table not found error while importing table defintion in PI 7.1?
Hi Guys,
I am trying to import the table structure from DB2 as an external defintion but i am getting the error table not found.
There are no connection issues with the DB2 and CC is good. Are there any additional settings i need to perform to import the table?
any help or suggestions would be really appreciated
Thanks,
SriniHi Srinivas,
I think you want to do JDBC lookup.. you must have created the JDBC receiver communication channel. As your communication channel is correct and still you are getting Table not found error.. Check following steps.
- Check that your Communication channel is activated and working fine.
- Check that the ID which you are using in JDBC receiver is having proper authorization to import the table definition.
Just check with all authorization.
I think the problem is with insufficient authorization to User ID used on JDBC communication channel.
Thanks,
Bhupesh.
Maybe you are looking for
-
Voice over: How do I read text? If the VO-Shift-Up and then VO-A don't work?
Hi, All the Voice Over posts say stuff like When you get to a "Text Content" or "HTML Content" box, you have to "interact with" it by pressing Ctrl-Option-Shift-Down Arrow. If it doesn't immediately start reading, press Ctrl-Option-A." (quoted from
-
Hi, If office web app is installed in my environment but I do not have excel calculation service running then can I open and edit excel files ?
-
Duplicate copies of apps in iTunes
When I connect my iPhone 3GS to my mini, the Apps tab displays the list of apps on the phone - but many of the apps are duplicated, i.e. there are two copies listed. Although in the past I've found that some of these duplicates are older versions of
-
Can't See Particular Flash Movie on Specific Site
OP: Windows 7 Web browser: IE9 , chrome Flash version : 10.3.183.7 Hey, I recently bought a new acer TravelMate 5742Z computer. Now i'm having an issue in playing a particular movie on my student's web site(www.high-q.co.il) that is only working with
-
This browser no longer exists at the location specified in the preview in browser preferences
I am creating a new website using Adobe Dreamweaver CC 2014. I tried to preview it in Chrome and I received an error message saying, "This browser no longer exists at the location specified in the Preview in Browser preferences." It previews fine in