Error in generate the time off from overtime

Dear all,
     I try to config absence quota of the overtime compensation(time off) in the system, and without clock time.one hour overtime for one hour time off.And I put the time evaluation into payroll calculation,this means we don't have the time evaluation.
     Now I have a problem that when I run the payroll calculation, the quota hasn't generated in the end. I find that in the process in payroll, the quota of time off have generated but hasn't transfered. The table qttrans is nothing and others table have the data.
    So , can you tell me where I have made a mistakes.
    Thanks.

Simon
if you are not haveing RPTIME00 (TE) the quotas are generated throough Programme RPTQTA00 Tcode PT_QTA00
if u want to generate the Compoff for Quotas Just check the Use of the Option IT0416 and XT00 Sub schema which you have use to insert the PCR
and if u want to Generate the OT you can generate it through IT2010 , IT0015
and also check the Time status in Infotype 0007 Which you have being maintained
Edited by: Sikindar on Oct 11, 2009 11:56 AM

Similar Messages

HT201514 i can't see the time capsule from airport utilities. i did follow "From the Apple menu, choose System Preferences. Choose View Time Machine. Set Time Machine to On if it is off. .....but i couldn't find the time capsule from airport utility.....

i did follow "From the Apple menu, choose System Preferences. Choose View > Time Machine. Set Time Machine to On if it is off "
. .....but i couldn't find the time capsule from airport utility..... why?

Are you using a new 802.11ac Time Capsule - the "tall" one - and are you still using Mac OS X 10.6.8?
You need OS X 10.7.5 "Lion" or later, or an iOS device, to configure an 802.11ac Time Capsule:
http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdf
See page 12.

Error in generating Run time version of the KB Object of a VC Product

Hi All
There is a VC Product which needs to be transported to the CRM server via Middleware.
Hence I need to create a Knowledge Base (KB Object) and generate a Run-Time version of the same.
I am getting an error while generating the Run Time version. The description of the error is as follows:
Object characteristic COSTING_LOT_SIZE is supported in IPC scnearios 3,5
and
Object characteristic PRICE_LIST is not supported in IPC scnearios.
The exceptions raised are STPO-MENGE (Component Quantity) and SDCOM-VKOND (Variant Condition)
Please provide your inputs and suggestions in this regard.
P.S: Once I generate the run time version successfully, the CRM Middleware Consultant needs to download the VC Product to CRM.
Thanks in Advance
Regards
Chaitanya

Hi Mike,
It likely is the viewer causing the problem. 2008 now has cascading parameters and the activex viewer does not support them.
All I can suggest is you try CR XI R2 which you can upgrade for free, you have to contact CIC to get a keycode to deploy your app, and test again.
R2 is out of support now so no fixes available...
http://downloads.businessobjects.com/akdlm/crystalreports/crxir2_sp4_full_bld_0-20008684.exe
http://downloads.businessobjects.com/akdlm/crystalreports/CRYSTALREPORTS06_0-20008684.EXE
Thanks
Don

Error while generating the Document... Bursting Status Report

Hey all,
I am getting some errors in a production environment when trying to burst out some invoice data.
This process has been pretty robust and out of 1000+ invoices a day, I can only find 4 that are failing regularily.
Why am I mentioning?, just to show that I am thinking this is a data issue, but just cannot see anything that stands out.
I can take the xml output and run it through my development suite on my local machine and all runs fine.
Just when it is running live through the db is when it fails.
Here is the Bursting output that shows the error....
<?xml version="1.0" encoding="UTF-8"?>
<BURS_REPORT>
<REQUESTID>27044820</REQUESTID>
<PARENT_REQUESTID>27044726</PARENT_REQUESTID>
<REPORT_DESC>Invoice Print Selected Invoices</REPORT_DESC>
<OUTPUT_FILE>[$OUT_DIR]/o27044820.zip</OUTPUT_FILE>
<DOCUMENT_STATUS>
<KEY></KEY>
<OUTPUT_TYPE>pdf</OUTPUT_TYPE>
<DELIVERY></DELIVERY>
<OUTPUT></OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
The problem is that this output doesn't necessarily help, nor can I find any hints in the OPP logs.
So... the question becomes...
Any ideas on where I can look to resolve this issue?+
Or where I can find any clues at, that would possible point at the issue?+
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
BI Publisher 5.6.3
Thanks
Hayden,

Tim,
Thanks for the suggestion, always seems to slip my mind that the Bursting Report has debug on it.
As far as what is generating the XML, it is oracle's standard, only slightly modified ... ;), invoice generating report, RAXINV_SEL.
Well RAXINV_SEL, or RAXINV_NEW, doesn't matter, same code, that is the executable.
I have turned on the debug, for both the source xml and the burst request, and unfortunately, still nothing stands out to me.
I was really expecting to see something in the burst log, pasted at the bottom...
but, it yet avoids me.
If I had to guess, I would bet the user went, in our terminology, "slashwit crazy", or example "model /w options", in some description.
But can't seem to find which field it is blowing up on, since we are catching these special characters in several places already, and slashwit is littered throughout the output.
I was also looking in the bursting control file for the special xml tags identified there, as those would require no slashes. But those are all clean.
Hayden,
XML Publisher: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 21-SEP-2009 10:43:12
XML/BI Publisher Version : 5.6.3
Request ID: 27048106
All Parameters: ReportRequestID=27044726:DebugFlag=Y
Report Req ID: 27044726
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:{node}
Preparing parameters
null output =/u007/app/applmgr/{instance}/out/{instance}/o27048106.out
inputfilename =/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Data XML File:/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Set Bursting parameters..
Temp. Directory:/u007/app/applmgr/{instance}/temp
[092109_104315337][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[092109_104315340][][STATEMENT] setOAProperties called..
Bursting propertes.....
{burstng-source=EBS, font.Free 3 of 9.normal.normal=truetype./usr/java/jre/lib/fonts/FREE3OF9.TTF, font.Times New Roman.normal.normal=truetype./usr/java/jre/lib/fonts/TIMES.TTF, system-temp-dir=/u007/app/applmgr/{instance}/temp, font.Arial.italic.normal=truetype./usr/java/jre/lib/fonts/ARIALI.TTF, user-variable:cp:parent_request_id=27044726, user-variable:cp:application_short_name=XDO, font.Courier New.normal.bold=truetype./usr/java/jre/lib/fonts/COURBD.TTF, font.Times New Roman.normal.bold=truetype./usr/java/jre/lib/fonts/TIMESBD.TTF, user-variable:cp:request_id=27048106, font.Arial.normal.normal=truetype./usr/java/jre/lib/fonts/ARIAL.TTF, font.Courier New.normal.normal=truetype./usr/java/jre/lib/fonts/COUR.TTF, user-variable.OA_MEDIA=http://diierp.corio.com:8002/OA_MEDIA, font.Courier New.italic.bold=truetype./usr/java/jre/lib/fonts/COURBI.TTF, user-variable:cp:org_id=83, user-variable:cp:DebugFlag=Y, font.Times New Roman.italic.bold=truetype./usr/java/jre/lib/fonts/TIMESBI.TTF, user-variable:cp:responsibility=51270, font.Arial.italic.bold=truetype./usr/java/jre/lib/fonts/ARIALBI.TTF, font.Courier New.italic.normal=truetype./usr/java/jre/lib/fonts/COURI.TTF, user-variable:cp:user=HAYDEN, user-variable:cp:reportdescription=Invoice Print Selected Invoices, user-variable:cp:language=en, font.Times New Roman.italic.normal=truetype./usr/java/jre/lib/fonts/TIMESI.TTF, user-variable:cp:ReportRequestID=27044726, user-variable:cp:locale=en-US, user-variable:cp:territory=US, font.Arial.normal.bold=truetype./usr/java/jre/lib/fonts/ARIALBD.TTF}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 27048106 on node {node} at 21-SEP-2009 10:43:19.
Post-processing of request 27048106 completed at 21-SEP-2009 10:43:20.
Finished executing request completion options.
Concurrent request completed
Current system time is 21-SEP-2009 10:43:20
---------------------------------------------------------------------------

Error while generating the Infoset

Dear SD Experts,
I get the Error While Generating the Infoset.
I am actually trying to write a Query.
the tables i have inserted are VBAK, VBAP, VBEP, LIKP, LIPS
below is the List.
1)Differences in field TEXT_VBAP_CHARG
2)Differences in field TEXT_VBEP_ETENR
3)Differences in field TEXT_VBEP_ETENE
4)Differences in field TEXT_VBEP_PLNUM
5)Differences in field TEXT_LIPS_CHARG
6)Differences in field TEXT_LIPS_LGPLA
Thanks in Advance.
Regards,
Santa Khattri.

Hi ,
From what you are saying, i am guessing there could be difference in field types used and in dictionary.
Try this.
1.Go to SQ02
2.Change query area (Standard / Global) in Environment --> Query areas depending on where your infoset is.
3. Select your Infoset.
4. Goto --> More functions --> Check and generate / consistency check --> Adjust.
or Try this.
1. Select your infoset.
2. Change
3. Goto --> Global properties --> see if "no automatic text recognition" is checked in options tab.
If you still having problems, give me more detail on how have you joined tables, have you used any extra fields, or have you done any coding in Infoset, I may be able to help you.
Thank you.
Regards,
Subin John.

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Error In Generating the PDF Form

Hi,
When I'm trying to activate the PDF Form, I got a message asying Error while Generating the PDF Form.
Can we debugg the Form, if yes, can body tell me how to with this process.
Any pointers would be a great Help.
ThankQ
Rohini.

Hi Om,
I need to fix this issue and I had taken help from Rohini.
I will try to explain the issue in detail.
I am trying to execute Tax Reporter Transaction PU19. Iam executing Quarterly Form 941 for USA for a Tax Company and a Period. This report gives an output Log and the log had generated errors in the log section General errors and Warnings.
The errors are :
Errors in generating the PDF Form : HR_F_941 and
Errors in generating the PDF Form : HR_F_941_SCHED_B
As we are new to the PDF Forms we don't know why the report has generated and how to find out by debugging or any other way.
So I need to find out how the above errors can be identified?
Thanks and Regards,
Madhan.

Bursting Program errors with "Error while generating the Document"

Hello Folks
Here is my bursting control file
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:globalData location="stream">
</xapi:globalData >
<xapi:request select="/XMLEXCEL1/LIST_G_Q0">
<xapi:delivery>
<xapi:email server="mycompany.com" port="25" from="[email protected]"
reply-to ="[email protected]">
<xapi:message id="1234" to="[email protected]"
attachment="true" content-type="html/text"
subject="Employee Report for Empno"> Dear
Please review the attached document</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document key="123" output-type="XLS" delivery="1234"
output="XMLEXCEL1" >
<xapi:template type="RTF" location="xdo://AR.XMLEXCEL1.en.00/?getSource=true">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
this is the output of bursting status report:
<?xml version="1.0" encoding="UTF-8"?>
<BURS_REPORT><REQUESTID>40403415</REQUESTID>
<PARENT_REQUESTID>40403339</PARENT_REQUESTID>
<REPORT_DESC>XMLEXCEL1</REPORT_DESC>
<OUTPUT_FILE>/opt/local/application/orafin/applmgr/out/outfaud/S1759.zip
</OUTPUT_FILE>
<DOCUMENT_STATUS>
<KEY>123</KEY>
<OUTPUT_TYPE>XLS</OUTPUT_TYPE>
<DELIVERY></DELIVERY>
<OUTPUT>
</OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
Can anyone help on this please.

can anyone help me?

Getting error in Portal "Error while generating the PDF" for BI Report

Hi Experts,
we are gettign the error while trying to generate the PDF file from the Reports.
Earlier it was working fine Adobe Reader 8 , currently we have upgrated Adobe Reader 9 in our system.
After this upggradation browser "*Failed to open PDF in Browser"*
Could you please suggest me how to diagnostic the error. Do we need to configre something in the Portal or in the Backend BI system for this.
Please suggest me the needful on this?
thanks
Narpal

Hello,
i am facing the same problem and found help by 925741:
"Error while generating PDF"
There is no more information available when clicking on the error.
Used Software:
Adobe 8
SAP_ABA             700       0018      SAPKA70018     Cross-Application Component
SAP_BASIS           700       0018      SAPKB70018     SAP Basis Component
SAP_BW     700       0020     SAPKW70020     SAP NetWeaver BI 7.0
PI_BASIS       2005_1_70 0018      SAPKIPYJ7I       PI_BASIS 2005_1_700
BI_CONT     703     0013     SAPKIBIIQ3     Business Intelligence Content
Any other ideas?
Thanks,
Rainer
Edited by: Rainer SIGG on Mar 9, 2009 4:41 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:27 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:42 PM

ODI 20088:Error While Generating The Scenario

Hi,
Today I have change the name my logical file schema(name is change to lower to upper case).Then select the new schema from File Model (only it is using the File Schema).Then Try to generate the scenario again but getting an error like this:
ODI 20088:Error While Generating The Scenario
java.lang.NullPointerException
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPopSourceSet(SnpGeneratorSQLCIT.java:7990)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPopCollectionBuild(SnpGeneratorSQLCIT.java:7726)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.preComputePop(SnpGeneratorSQLCIT.java:7668)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPop(SnpGeneratorSQLCIT.java:7568)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPackageStep(SnpGeneratorSQLCIT.java:10477)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2883)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2817)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11481)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11505)
     at com.sunopsis.graphical.dialog.SnpsDialogScen.generateScen(SnpsDialogScen.java:190)
     at com.sunopsis.graphical.scenario.DwgScenGeneratingWizard.generate(DwgScenGeneratingWizard.java:68)
     at oracle.odi.ui.action.SnpsPopupActionGenerateScenHandler.actionPerformed(SnpsPopupActionGenerateScenHandler.java:103)
     at oracle.odi.ui.SnpsActionControler.handleEvent(SnpsActionControler.java:86)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:897)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
     at java.awt.Component.processMouseEvent(Component.java:6297)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
     at java.awt.Component.processEvent(Component.java:6062)
     at java.awt.Container.processEvent(Container.java:2039)
     at java.awt.Component.dispatchEventImpl(Component.java:4660)
     at java.awt.Container.dispatchEventImpl(Container.java:2097)
     at java.awt.Component.dispatchEvent(Component.java:4488)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
     at java.awt.Container.dispatchEventImpl(Container.java:2083)
     at java.awt.Window.dispatchEventImpl(Window.java:2489)
     at java.awt.Component.dispatchEvent(Component.java:4488)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
     at java.awt.EventQueue.access$400(EventQueue.java:81)
     at java.awt.EventQueue$2.run(EventQueue.java:627)
     at java.awt.EventQueue$2.run(EventQueue.java:625)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$3.run(EventQueue.java:641)
     at java.awt.EventQueue$3.run(EventQueue.java:639)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Please Help
Thanks
Anindya

If you have not deleted the old file schema, then it should have been work but it seems to be theissues with the link between interface and model .
I cannot say this is the actual reason but it might be. Since you have draged the file datastore to interface, interface is probably pointing to old schema and file model is pointing new schema.
I guess you have to recreate the interface again. Let me know how it is going with you
Bhabani
http://dwteam.in

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Error while generating an XML Document from XML Schema with JAXB

Hi,
I am following this OTN tutorial to generate the XML document from Java classes got from the XSD document.
http://www.oracle.com/technology/pub/notes/technote_jaxb.html
I am able to generate all the Java classes but getting error on compiling the XMLConstructor.java class which is use for generating the XML document :
I am using JDK 1.5 and
Oracle 10g XML Developer's Kit (XDK) Production for Java. xdk_nt_10_1_0_2_0_production
(though these are warnings I am not able to run it.)
Error
C:\Prototype\classes\jaxbderived\catalog>javac -Xlint XMLConstructor.java
warning: [path] bad path element "%CLASSPATH%": no such file or directory
XMLConstructor.java:42: warning: [unchecked] unchecked call to add(E) as a member of the raw type java.util.List
journalList.add(journal);
^
XMLConstructor.java:46: warning: [unchecked] unchecked call to add(E) as a membe
r of the raw type java.util.List
articleList.add(article);
Thanks
Sanjeev ([email protected])

Use JDK 1.4.

SWF error- while generating the flash files.

Post Author: [email protected]
CA Forum: Xcelsius and Live Office
Hi, in the old forum I came across the folowing topic: SWF error- while generating the flash files.
As I have the same problem, I would like to know the solution / answer / meaning please. What do I have to change in order to let in function properly again.
Thanks anyone.
Femke
(The post is from 3/6/2007)
The following error is generated upon generating the flash files Any insight???SWF error- while generating the flash files.--ErrorSWF Function Overflow. The generated SWF will not function correctly because data dependencies go beyond SWF limits.--
OK -

Post Author: Andres
CA Forum: Xcelsius and Live Office
Hello.
I'm having the same problem. It appeared after I made use of many cells (a table of 10x200 cells) with formulas inside them.
Before that, while I was making my tests and only used a few cells and the .XLF file was 4Mb, I had no problem. Now that the .XLF file is 8Mb I see this error appearing (in Spanish):
"Error
Desbordamiento de la función SWF. El archivo SWF generado no funcionará correctamente ya que las dependencias de datos superan los límites de SWF."
Any idea of how this could be resolved (appart from using less data)?
Thanks in advance.

I d/l your mozilla firefox today and now I get the error 0x80070002 all the time...how do I fix that?

I downloaded mozilla firefox today and now I get the error 0x80070002 all the time, and I cannot use system restore because of it. How do I fix that so that my computer works right again. I was restoring because after I d/l your mozilla today, I lost all of my contacts in my msn email...just been tearing my hair out over this and it is soo darn frustrating. Tell me how to fix this. Marilyn

Hi,
The error is totally unrelated to Firefox. Please see [http://support.microsoft.com/kb/910336 this]. The [http://answers.microsoft.com/en-us Windows OS forum] will also be helpful.
Please also check the downloaded file by right-clicking > Properties > Digital Signatures, which should say '''Mozilla Corporation''' and '''This digital signature is ok''' in '''Details'''. You can download Firefox from a known site like e.g. https://www.mozilla.org/en-US/firefox/new/
You can try to Reset Firefox which would hopefully display the missing features, all (contacts, emails, settings etc.) of which are actually stored at the MSN site and are temporarily displayed by Firefox every time the site is accessed.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

Error in generate the time off from overtime

Similar Messages

Maybe you are looking for