Error in generating a report group in Report Painter

Hi,
I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
Thanks,
Louie

There's no error when I generate the same report in a new created group as well as when I generate the existting report group without the new created report.
Information on where terminated
    The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
     in "FILL_RANGES_FROM_SET".
    The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
    The termination occurred in line 92457 of the source code of the (Include)
     program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
    of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
     the editor 924570).
Louie

Similar Messages

Error in generating PDF Based form - SUI Report

Hi,
We are running Quarterly reports for Unemployment reporting at USA using tax reporter.
We are not able to see the complete spool output for the Wage Type Listings but only just 1 page. In the tax reporter log we get the error "Error in generating PDF Based form HR_F_WLIST_CA" for respective states.
Any idea how to resolve this.
We are on ERP 6.04.
Thanks,

Hi,
I think its Basis problem.Ask basis gyus to repair the connection and try again.
Regards,
Manoj.

Getting error in Portal "Error while generating the PDF" for BI Report

Hi Experts,
we are gettign the error while trying to generate the PDF file from the Reports.
Earlier it was working fine Adobe Reader 8 , currently we have upgrated Adobe Reader 9 in our system.
After this upggradation browser "*Failed to open PDF in Browser"*
Could you please suggest me how to diagnostic the error. Do we need to configre something in the Portal or in the Backend BI system for this.
Please suggest me the needful on this?
thanks
Narpal

Hello,
i am facing the same problem and found help by 925741:
"Error while generating PDF"
There is no more information available when clicking on the error.
Used Software:
Adobe 8
SAP_ABA             700       0018      SAPKA70018     Cross-Application Component
SAP_BASIS           700       0018      SAPKB70018     SAP Basis Component
SAP_BW     700       0020     SAPKW70020     SAP NetWeaver BI 7.0
PI_BASIS       2005_1_70 0018      SAPKIPYJ7I       PI_BASIS 2005_1_700
BI_CONT     703     0013     SAPKIBIIQ3     Business Intelligence Content
Any other ideas?
Thanks,
Rainer
Edited by: Rainer SIGG on Mar 9, 2009 4:41 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:27 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:42 PM

Error while generating XML file from rdf report.

Hi All,
we are having a rdf report that displays images retrieved from data base. I need to convert this report to xml report(using rtf template).
when i tried to run the report after changing the output of the concurrent program to "XML", i am getting the below error.
REP-1295: Data format of column 'PK1_VALUE' is unsupported.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1295: Data format of column 'PK1_VALUE' is unsupported.
images are stored in BLOB type columns.
Can anyone help me on this..
thanks
gtungala

Hi Hussein,
Thank you for the reply.. i was sure that i will get correct response with in a day..
you people made this as one of the best technical forums..no doubt in that..
need some more help from you...!
The metalink docs say that it is not possible to generate xml file as the image is BLOB.
Can you please tell me any solution for developing xml template(rtf) which can display images that are stored in data base BLOB columns. Even PL/SQL script will do.. I have tried with changing the BLOB to CLOB in rdf query(by calling a function that converts BLOB to CLOB). it didnt help.
thanks in advance..
gtungala

Errors when generating a adobe form in report

Hello,
I have a problem with the solution of the errors to generate an adobe form. I put in a situation:
- I need to create a form with several dinamic tables, each below the previous. For each dinamic table, apart from the header row (column titles) was necessary to create a table title above the header. Furthermore, this title should remain with the table, for example, if the header row and first row of the table is not entering the page, jump to the next page (but so must the title of the table next to them)
My version of LCD is version 9.0.1.0 and adobe reader is 10.0
One possible solution is proposed in this link (put text above the table with the title and check "Keep with Next "):
http://forums.adobe.com/thread/849603?tstart=0
This solution works correctly in the Preview in Adobe Live Cycle Designer, but when I run the form with a report generates an error file "error.pdf" Does anyone know who is that? The lines of code in which failure is just where the title of the table causes "Keep with Next ". In the Adobe forum, I have commented that the utility began to be usable in version 8.2 of ADS, we believe we have the 8.0 but not sure.
ERRORS:
Render status: success with warnings (pdf' Log Entries)
Invalid version: The current version of the XFA template model exceeds the capability of XFAPresentationAgent.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 212.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 594.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 1123.
Invalid version: The current version of the XFA connectionSet model exceeds the capability of XFAPresentationAgent
Invalid version: The current version of the XFA template model exceeds the capability of Acrobat / Adobe Reader 7.0.5.
Unrecognized namespace XFA 2.8, defaulting to XFA 2.1
Render status: success with warnings ('pcl' Log Entries)
Invalid version: The current version of the XFA template model exceeds the capability of XFAPresentationAgent.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 212.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 594.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 1123.
Invalid version: The current version of the XFA connectionSet model exceeds the capability of XFAPresentationAgent
Unrecognized namespace XFA 2.8, defaulting to XFA 2.1
PS: I searched the forum but I can not understand the answers.
Thanks very much
Edited by: jmgaley on May 13, 2011 1:52 PM

Hello,
I found a possible cause of my failures. Has anyone needed to change the default version of PDF generated by ADS (Adobe Document Services)?
"Changing the Default PDF Version"
http://help.sap.com/saphelp_nw04s/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
My forms always generated pdf 1.6 (Acrobat 7.x), so they are generating so many errors. Also when I use the preview of the SFP transaction form, the need for PDF version is "1.7, Adobe Extension Level 3 (Acrobat 9.x)"or "1.7, Adobe Extension Level 5 (Acrobat 9.x) " (changing Form Properties -> Defaults -> Version of destination)
How do you get out this version from the ADS? What you need to change?
Greeting and thanks

Report Group in Report Painter

In my report group there are many reports .
Now i need to give a transaction code to my report group.
Then which report will execute by the transaction code

Hi
To create a Transaction Code for a Report Painter/report writer report
Tcode for Report Painter
To create a TCode, follow the steps below.
1) Go to Transaction code SE93, Enter TCode Name and Press Create.
2) Give short Description and select Parameter Transaction, Press Enter
3) Select Transation Radio Button and write START_REPORT in the next text
box Also Check the box Skip Initial Screen.
4) On the bottom of Screen (default Values), Enter Parameters
i) Name = D_SREPOVARI-REPORTTYPE. Value = RW
ii) Name = D_SREPOVARI-REPORT Value = Your Report Group Name (Say 1SIP)
5) Save and Execute.
Reward points for useful Answers
Regards
Anji

Report group and report library does not exist

Dear Guru's
We are not able to execute the report S_ALR_87013019 in production. After doing analyses, we came to know that library 602 & report group 6OBU does not exist in production, and hence we are not able to excute this report.
We have to tried to import from client '000' from transaction code GR59, But in that we are not getting 6OBU report group.
Please help us to resolve the issue, as we required this report on priority basis.

Dear Prashant,
Thanks for your reply.
The solution given by you is to transport the report library from Dev Client. But our client does not transaport the reports in production system.
Is ther any other solution to retrieve the library.
Thanks
Varsha

Error while generating Production Order from Recommondation Report

Hi..
I have got few production orders to be created through Recommendation Report.
After getting them 'Checked' when i try to create production order, following error message appears :
No matching records found 'Product Tree' (OITT) (ODBC - 2028) [message 131-183]
Please let me know what went wrong ?
Regards
Rakhi

Hi.......
I think you are trying to make production orders who has no BOM. First prepare BOM and then Create Production Order from Recomemdation Report. Because it supports only Standard Production Order and not Special......
Regards,
Rahul

How to Serial No Printing in Report - group Above Report

In Scott Schema , report data query - select rownum, emp, ename, job, deptno from emp;
Reprot type : group Above.
If I am not using group above, serial no like 1,2,3 is printing correctly. But if i use group above, serial no are not printing on order. it is printing like 5,4,3, 8.. li
How to print serially with group above.
Thanks in advance for the help

O.Developer wrote:
In Scott Schema , report data query - select rownum, emp, ename, job, deptno from emp;
Reprot type : group Above.
If I am not using group above, serial no like 1,2,3 is printing correctly. But if i use group above, serial no are not printing on order. it is printing like 5,4,3, 8.. li
How to print serially with group above.Avoid rownum and use summary column at detail block and set following property.
Summary function :count
summary column : ename
reset at : <group name>Your serial problem solved.
Hope this helps...
Hamid

Report Painter - Report group doesnot exist

Hello Expert
I have done the development of new report and report groups through report painter. I did the assignment of report to report group, Also i could able to access the report through T.Code GR53 / GR55 codes.
I have done the Generate report option (Shift +F8) option through T.Code GR52 -> got the message that " Report group ZXXX has been generated". Also did the " Mass generator " and no error are found.
I could able to assign the T.Code through SE93 in my development client. I did the trasnport the development to Unit Testing Server.
In Testing Server, if i try to use the T.Code ... i am getting the message as " Report Group does not exist with message number - GR409. Even thou, i am able to access the report and report group directly through GR53 / GR55.
Kindly guide me, is there any step i have missed ?
Regards
Anil Kumar

Hello Eli
Thanks for your reply,
I did the Mass Generator option in "TEST System" also.
I am not getting any error message & all are in "green color"
Still i am getting the same message " Report Group Does n't Exist"
Kindly guide to me over come the issue
Regards
Anil Kumar

REPORT GROUP tcode: gr52

I have created a custom program and added it to a standard report group in GR52. But when i execute the Main Report group and try to drill down to the custom transaction code. The sy-tcode is still START_REPORT. Is there a setting i am missing when creating the custom report transaction. While creating the transaction i selected it as a regular report transaction.
thanks
Kshamatha

YOu have to create a "Parameter Transaction"
For "Defualt values" tab,
transaction - START_REPORT
Check the "Skip initial screen"
Press one ENTER here.
GUI support - all 3 checkboxes
Default values (table control at last) .. you can use F4 here for the field optoins on the screen field name
Screen field name
D_SREPOVARI-REPORTTYPE RW " < you report group
D_SREPOVARI-REPORT 5A21 " < report
Save and activate.
Regards
Naimesh Patel

Report painter:Deletion of multiple report groups

Hi Gurus,
I have a requirement of deleting multiple report groups and reports created through report painter since these are no more used
I checked in options/functions available in SAP, but couldn't find any option for mass deletion of reports groups available
I understand we can use an LSMW to do this for multiple report groups however apart from this is there any function provided by SAP for deleting multiple report groups
Thanks,
Gaurav

Hi Ajay,
Thanks for the suggestion
I also couldn't find anything handy. In my case the time in manually deleting would have taken less than creating an LSMW for such one-off situation so just delete the obsolete report groups manually
Thank you,
Gaurav

Report Painter: How to find report group of a report?

Hi experts,
I have a report that a user created in report painter, I created a transaction (normal report transaction) to acess this report, but the transaction isn't executing right (I don't have the option to see the results only to print it), and I want to try creating a parameter transaction, however nobody knows the report group the report are vinculed.
I want to know if are possible to consult the report group a report is in.
P.S. Sorry my english, points will be awarded for good answers.
Regards,
Fabio Gross
Edited by: GrossFabio on Feb 8, 2011 6:39 PM

Thanks to all for the help, I solved my problem looking into older topics from the forum.
To all who may have the same problem:
1 - Go to SE93, create a parameter transaction;
2 - Report = 'START_REPORT' / skip initial screen = 'X' / Inherit GUI attributes = 'X';
3 - In the parameters table you will type:
     D_SREPOVARI-NOSELSCRN = blank
     D_SREPOVARI-VARIANT = blak
     D_SREPOVARI-REPORT = blank
     D_SREPOVARI-REPORTTYPE = RE
     D_SREPOVARI-EXTDREPORT = KP 01RPSCO_X                       NAME_OF_YOUR_REPORT
4 - Special atention to the last parameter as it is the most important in this transaction, the first part (including spaces) are always the same, the last one is the name of the report you created through the CJE*.
Regards,
Fabio Gross

Report Group 1SIP Consistency Check

SAP reccomends the following to be consitency check for CO customers for system copy:
"CO customers: An additional consistency check can be performed by running the report group 1SIP before the system copy in the source system, as well as after the copy in the target system, and then comparing the results. No customer data may be changed in the meantime."
I have the following question:
1. By "Running the Report Group" does SAP mean running the individual reports under the Report Group 1SIP?
Edited by: Asim M on May 23, 2008 6:49 PM

Hi,
Yes, that is what is meant, i.e. report 1SIP-001 or TA S_ALR_87013611. In this case report group and report are synonymous as there is only one report assigned to the 1SIP report group (customer reports should never be assigned to SAP standard report groups). Therefore running 1SIP via TA GR55 results in the same output.
Regards
Karl

What is the significance of report writer and report painter

hi all,
can anyone throw light on report write and report painter, when and why it used with examples.
thanxs in advance
regds
hari

Dear Hari,
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
Report Painter fulfills a function similar to Report Writer, but is easier to use. Most of the functions found in Report Writer have been built into Report Painter; however, you do not need to be familiar with all Report Writer concepts (such as Sets) in order to use Report Painter.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
http://help.sap.com/saphelp_47x200/helpdata/en/56/32e339b62b3011e10000000a11402f/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Regards,
Naveen.

Error in generating a report group in Report Painter

Similar Messages

Maybe you are looking for