Error in generating activity
Hi experts,
I am facing vary strange problem i want to create aactivity but when i create a activity then it shows me a error
"The transaction 'Activate Planned' is not allowed for Business Activity <w/out no>, because no status is set to permit it.
*System Response*
*You cannot carry out the transaction 'Activate Planned'.*
*Procedure*
*You can carry out this transaction if you set a user status, which permits 'Activate Planned'*
But the same activity is working fine in production server.
Please help me rewarded point must be given.
Regards,
Khurram Siddique
Hi Khurram,
Have you checked the following Customizing pathway for entries in your system and compared them with those in Production?
>Customer Relationship Management -> Transactions -> Settings for Activities -> Maintain Transaction Customizing for Activities -> Assign Status and Subject Profile for Each Transaction Type
Here you can map the Transaction Type (Activity) to an External/User Status.
Verify what entries are present in Production for the specific Activity you're trying to create.
Let us know the results please.
Similar Messages
-
Error when generating master data routines when activating infoobject
Hello Gurus,
I had an issue with one of my info object.
I Created the one Custom InfoObject with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject again the test system it gives me an error
Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
Can you please suggest me what are the options.
i cannot delete the object as it is used in many cubes which is having data.
Appreciate your quick response.
Thanks,
Bhaskara Rao.If your Prod is working fine, it should work in test too.
Did it ever worked in test after transport?
Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
Edited by: ashok saha on Mar 6, 2008 8:05 PM -
Error in generating a sel-screen.
friends,
am getting an error while activating a report saying that error in generating the sel. screen 1000 in line 0....also, am not able to select the selection-texts (in the goto->text elements), which says there aer serious syntax errors...pl help..thanks all..
here is my selection-screen declaration code
SELECTION-SCREEN BEGIN OF BLOCK APPLICATION WITH FRAME TITLE TEXT-002.
PARAMETERS:
PM_WERKS LIKE MSEG-WERKS OBLIGATORY DEFAULT '1000',
PM_MJAHR LIKE MKPF-MJAHR OBLIGATORY DEFAULT SY-DATLO.
SELECT-OPTIONS:
PM_MBLNR FOR MSEG-MBLNR NO-EXTENSION MEMORY ID MBN.
PARAMETERS :
PM_LGORT LIKE MSEG-LGORT OBLIGATORY DEFAULT '1001',
PM_BUDAT LIKE MKPF-BUDAT.
SELECTION-SCREEN END OF BLOCK APPLICATION.Hi Satish,
i am not facing any kind of problem with your code. can you check it once.
TABLES: mseg.
SELECTION-SCREEN BEGIN OF BLOCK application WITH FRAME TITLE text-002.
PARAMETERS:
pm_werks LIKE mseg-werks OBLIGATORY DEFAULT '1000',
pm_mjahr LIKE mkpf-mjahr OBLIGATORY DEFAULT sy-datlo.
SELECT-OPTIONS:
pm_mblnr FOR mseg-mblnr NO-EXTENSION MEMORY ID mbn.
PARAMETERS :
pm_lgort LIKE mseg-lgort OBLIGATORY DEFAULT '1001',
pm_budat LIKE mkpf-budat.
SELECTION-SCREEN END OF BLOCK application.
Regards
Vijay -
Error occurs while activating a 'Write Optimized' DSO.
I am getting error " There is no PSA for infosource 'XXXX' and source system 'XXX' while activating a newly defined DSO object.
I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSOHi,
For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
From SAP help
You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Thanks
Srikanth -
Error while generating ARE doc. Internal number .
Error while generating ARE doc. Internal number .
Message no. 4F238
while creating ARE1 ,whilke saving the system is giving a message.
please help.
points will be rewarded.check whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P -
ERROR WHILE GENERATING ARE-1 doc internal number
Dear sir
while creating ARE-1 Doc following error getting
error while generating ARE 1 DOC internal number
message no : 4F238
I MAINTAIN ALL NO RANGE OBJECT ALSO THEN ALSO GETTING ERROR
Sl No
Object
Tocde
Module
After Closing the Year ;
Maintain the Number ranges for following number
range objects related to CIN for the New year
Excise/
Series Group
1
J_1IINTNUM
SNRO/SNUM
Internal Document number to be Generated
2
J_1IRG23A1
SNRO/SNUM
MM
RG23A PART1 number Range object
3
J_1IRG23A2
SNRO/SNUM
MM
RG23A PARTII number Range object
4
J_1IRG1
SNRO/SNUM
SD
RG1 Number range object
5
J_1IRG23C1
SNRO/SNUM
MM
RG23C Part1 Number Range Object
6
J_1IRG23C2
SNRO/SNUM
MM
RG23C PartII Number Range Object
7
J_1IPLA2
SNRO/SNUM
MM
PLA PartII number Range Object
8
J_1IINTPR2
SNRO/SNUM
SD
Despatch Serial number
9
J_1IEXCLOC
SNRO/SNUM
SD
DOMESTIC EXCISE INVOICE
10
J_1IDEPINV
SNRO/SNUM
SD
EXCISE INVOICE FOR PLANT STO
11
J_1IEXCEXP
SNRO/SNUM
SD
Export excise invoice number range
12
J_1I57FC
SNRO/SNUM
MM
57FC Number Range Object
13
J_1IARE1
SNRO/SNUM
SD
ARE1 Series Group
14
J_1IARE3
SNRO/SNUM
SD
ARE3
15
J_1IBOND
SNRO/SNUM
SD
Bond Maintain (2007)
16
J_1ILIC
SNRO/SNUM
SD
Licence capture - CT3 maintain (2007)
THANKS & REGARD:
ROHIT NARSALE
9624886654check whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P -
Application error while generating PDF form
Hello there,
I am getting the message "Application error while generating PDF form" and when you hover it has additional information Message Class HREIC_APPL - Message number 258.
I get this upon doing the following steps:
1. Enter SAP R3, enter HREIC on the transaction code input.
2. Enter EIC, Activity Search. Searched for an Activity, selected it and click the "PRINT" button.
3. After clicking the PRINT button, I get the error message "Application error while generating PDF form".
Installed this on development box, did the same configuration in test system, but still I get this error. ADS Configuration is working fine and configured fine.
Is there anything else that is needed to be checked? like Ports, Firewalls, etc?
Thanks a lot.Be sure that the RFC name is "ADS" and not anything else.
Thanks. -
Error when generate Transformation- GP_ERR_RSTRAN_MASTER_TMPL related
Dear all:
We created transformation for cube 0PA_C01 and infoSource 0HR_PA_1 based on 3.x transfer rule. When we performed "Check", it is done successfully with any error. But during activation, there s syntax error occurred in program "GP_ERR_RSTRAN_MASTER_TMPL". And error lines are as following--
line 2815:
"Field "_B_1-MVIEW-CO_AREA" is unknown. It is neither in one of the spe"
"cified tables nor defined by a "DATA" statement. "DATA" statement. "DA"
"TA" statement."
Also there are two error message generated :
RSTRAN511- Error During generation
RSO404 - Error when activating Transformation 0ERUYQ8XMDJS1DP5U5U7HTBBNBME3GOE
Any thought please ~~~
BR
SFHi
Iam creating transformations for 0IC_C03. Iam facing problem in activating the transformations successfully. Some times it is throughing the above said error and some other times it is throughing the error ASSIGN_TYPE_CONFLICT. I searched forums almost a day and i found that SP 9 is unstable in which we are now and experts suggesting to upgrade to SP10 or SP12. But the problem is client is not willing to go to SP upgradation now. I have no clue now. I almost spend two days on this. But on the other hand iam able to generate transformations successfully and able to load data for other cube 0SD_D04.
kindly suggest any one to get rid of this issue. Iam running out of time.
Thanks
Kumar -
Internal Error while Generating the History
Hi All,
In BI7, going through Bex Analyzer when i log in i get this message " Internal error when generating the History. Use a different view".
The rest of the options i.e.roles, favorites, Infoarea are all okay but clicking the history tab pops up this message.
any thought??
Thanks,
Talibcheck whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P -
Error in generated code :Component Interface
Hi All,
I have my webdynpro component active works fine in Dev Server.
When we move it to qualtiy we got a strange error " Error in Generated Code, Type Z*IWCI is unknown.
Its related to the Component interface which gets generated automatically while any WDA is created but in our system it isnt getting generated?
Looking for your valuable comments on ths
Regards
BhanuHi Bhanu,
Goto se09 check for that request ICF service is generated or not? I think you first created in $TMP and assigned package.
If ICF service is not available, just copy it to new comp, it will create new ICF service. I dont know this is the solution,
just a guess.
Cheers,
Kris. -
Error when Generating the Program
Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
SurenderI did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time 05/14/2007 19:33:54
Short text
Jump distance is too large and cannot be generated.
What happened?
A jump distance is too large and cannot be generated.
A control structure or a routine with "CHECK" or "EXIT" contains
too many ABAP statements.
Error in the ABAP Application Program
The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
determined that
within an ABAP event a control structure (for example, IF..ENDIF
or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
become too large. The resulting jump distance is too large so that
it could no longer be generated.
With the internal load format, the jump distance must not be
greater than 32768 (this is the size of approximately 10.000
ABAP statements).
The jump distance that is to be generated, however, is 50885.
How to correct the error
The ABAP application program must be changed. -
'Error when generating the selection screen "0500"
Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
SachinHi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini -
Error when generating the update program
Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
ThanksHello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank -
Error when generating master data routines
Hello all,
I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
I´m working with BW 7.0.
Has anybody had this problem?
How could I solve it?
Thanks in advance.
CarmenHi Carmen,
I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
I found also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
I hope this helps.
Best Regards.
AW -
Error when generating program when creating CVC using infoprovider
We are receiving the message "Error when generating program" when
creating CVC using infoprovider.
This may have something to do with the fact that we added an attribute
to the infoObject 9ALOCNO. We are getting an information message if we
run a consistency check in the POS.
We had this same issue in our development system. Here, I deactivated
and then reactivated the CVCs and this resolved the problem. However,
this is not a good solution since this is also a problem in our
production system and we do not want to deactivate the POS.
is there another option to fix this problem?
Thank you,
RumiHi Rumi,
i would try these:
1. Make sure the cube is active and every thing ok there
2. Run programs /SAPAPO/TS_PSTRU_CONS_CHECK on POS and /SAPAPO/TS_LCM_CONS_CHECK on planning area respectively.
3. Check the CVC creation log in transaction /n/sapapo/mc62 for more details.
Maybe you are looking for
-
Ipod shuffle 2nd gen wont turn off
my ipod shuffle wont turn off! it is 2nd gen i think it is silver with clip on on the back. when i pause it it will pause but when i turn switch to off green light still flashing and will still play if press play button any ideas? or do i buy another
-
Ipod flashes red when attempting to sync.
since 5.0 i have not been able to sync and i have lost 1200 songs from my ipod that are still showing in my itunes library. when i attempt a transfer the ipod icon in the margin of itunes flashes red then i get unknown error -69. A) what does the fla
-
IPhoto Not Responding after Migration to new MacBook
Gang, I bought my wife a new White MacBook and I used the Migration Assistant to move her data from her old iBook. Everything went well except for iPhoto. When I opened it for the first time it started updating the photo library but it hangs at aroun
-
Sharing a Catalog's History between volume Folders?
Setup: I have been working on my images 'Volume A' in the past. I have just mounted a pair of 1.5Tb drives inside my (MacPro) workstation and now have the same series of images, from 'Volume A', on one of the new internal drives. One of the new drive
-
HP officejet pro 8600 plus - Error B86F3A7C
Our printer is locked with all indicators flashing. When turned on and off, it boots alright and then displays the errornumber pasted below - and starts flashing again. How to get it back to normal operating mode ?? This question was solved. View Sol