Error in generating form
While generating a form designer is giving GPF in the details of which it says 'DWFDE61 caused an invalid page fault in module CORE40.DLL'
Also before giving this GPF, on the message window following things are there
'An internal error has occured, context and traceback follows...
Last CV Function:cvfqip
Last CV object:Module PTRP015F(This is the name of the module I am trying to generate)
Current Preference object:Module PTRP015F(This is the name of the module I am trying to generate)
Last function recorded:cflblkb_cre_master_tab_list():383'
Please help me...
While generating a form designer is giving GPF in the details of which it says 'DWFDE61 caused an invalid page fault in module CORE40.DLL'
Also before giving this GPF, on the message window following things are there
'An internal error has occured, context and traceback follows...
Last CV Function:cvfqip
Last CV object:Module PTRP015F(This is the name of the module I am trying to generate)
Current Preference object:Module PTRP015F(This is the name of the module I am trying to generate)
Last function recorded:cflblkb_cre_master_tab_list():383'
Please help me...
Similar Messages
-
Error while generating form 16 in portal - Screen output without connection
Dear Gurus,
We are facing error while generating form 16 through portal and getting the below error in portal.
Screen output without connection to user. error key: RFC_ERROR_SYSTEM_FAILURE
When we checked for dumps in R/3 the following dump is coming:
DYNPRO_SEND_IN_BACKGROUND with error message :
Message class : FPRUNX
Message number: 102: No job started.
Then we tried to execute the form 16 through R/3 itself using tcode PC00_M40_F16 after putting in the relevant values in the selection screen and then press on PRINT FORM button, but surprisingly the system logs out without giving any error or dump.
We tried doing it repeatedly and once in these attempts we got an error saying Initialization of font server module failed.
We are not getting clue as to why this is happening. <<Text removed>>
Regards
Edited by: Matt on Jul 27, 2011 9:50 AMDear,
This might be the problem of Adobe Acrobat Reader. what is the version of Adobe you are using ?? If it 9.0, then uninstall it and reinstall 8.0 and then check .
Could you please check your installed SAPGUI component? If component 'Engineering Client Viewer' is installed, please uninstall
it. And try to call same transaction again.
BR, Deepak -
Dear Experts
My client is using SAP ECC6 EHP4 and We recently updated the HR Service Pack to SAPK-60464INSAPHRCIN in order to apply the SAP Note 1829618 - PY-IN: Union Budget Changes for Year 2013.
After upgrading Service Pack we are getting the below error while generating Form-16.
Layout set HR_INF16_2012_B in language EN does not exist
How to resolve this issue
ThanksThis a Blunder from SAP. And this issue we are getting in almost all the client.
For this we have to download respective Form from Golder client 000 and upload again in our working client.
Better please raise an OSS message with SAP to provide you the steps.
Thanks & Regards
Rupesh Jain -
Error in generating form with 6i
I have installed designer 6i rel 2 with form developer 6i on NT
4.0.
When in design editor, I want to generate the form with generate
module, the system generate "CDR-21600: A running Generator or
Utility has failed."
Also in action column writes: " It is possible that the internal
cache is now in an inconsistent state. You are therefore
recommended to close and restart the application."
Could anyone tell me what is the problem and how to solve it.
thanksHere is an document which describes some known causes of CDR-
21600 errors. I hope it will help you.
PURPOSE
To describe some known causes of CDI-21600 errors and to
suggest possible solutions and workarounds.
SCOPE & APPLICATION
This note was written for users of Oracle Designer releases 2.1.x
and 6.0.
CDI-21600 errors occur most frequently during Design Capture and
when generating forms with the Forms and WebServer generators.
Investigating CDI-21600 errors
In Oracle Designer Release 2.1.2 and Release 6.0, this error has
the form:
CDI-21600 'A running generator or utility has failed'
The Release 2.1.1 error message was: 'Generator or Utility throw
an Exception'
The CDI-21600 error message means that the generator is hitting
an unhandled exception, also known as a GPF (general protection
fault). The CDI-21600 error masks the underlying exception error.
To see the real error do the following:
1. Go into the Registry Editor (REGEDIT).
2. Navigate to HKEY_LOCAL_MACHINE\software\oracle\des2_70
3. Set EXCEPT_HANDLING to 0 (by default it is 1).
Repeat the action that resulted in the error.
Known Causes of CDI-21600 Errors and Possible Solutions
Some of the reasons why CDI-21600 errors occur are listed below.
1. A common cause of CDI-21600 errors is failure to install the
necessary
Developer patches.
See [NOTE:64630.1] Developer Patches required to run
Designer with Developer
2. Check that Designer is running on a supported database. Also
check that the
TNS connection is correct.
See [NOTE:60705.1] Designer Certification Matrix (HTML)
3. Check for 'dangling' foreign keys, in other words FKs no longer
owned by any
table in the repository. Delete all invalid constraints.
Invalid constraints may be created if you use the repository
dump utility to
dump and restore external foreign keys referencing tables
shared into the
application system, without dumping and restoring the tables
that own them.
If you restore a complete dump (rather than a 'skeleton' one),
and then use
the 'Reconnect Share Links' option when restoring, you may be
able to
resolve this problem.
To get a complete list of 'dangling' constraints in your
repository, connect
using SQL*Plus and use the following query:
SELECT app.name, key.name
FROM ci_application_systems app, ci_constraints key
WHERE key.table_reference IS NULL
AND key.application_system_owned_by = app.id;
You can also run CKAZANAL.ANAL_REFERENCES on your
repository and delete all
the invalid constraints that it finds. You can run the Repository
Analyzer
from: Front Panel -> Repository Administration Utility -> Utilities.
NOTE: There may be inconsistencies in the repository that the
Repository
Analyzer cannot fix. You might solve such problems by
dropping all the
tables of your application, recreate them from the ERD,
then use the
DDT and recreate your modules.
[BUG:847190] CDI-21600 during forms generation: 'dangling'
foreign key
"Since the generator is running on a repository that contains
invalid
constraints and the Repository Analyzer solves the problem,
bug closed as
unfeasible to fix."
4. Check your modules for invalid or missing references such as
missing window
placements.
5. Try generating your module against default templates and
object libraries.
6. When capturing forms or libraries, try capturing the form or
library without
application logic, then capture the application logic on its own.
See [NOTE:1064690.6] CDI-21600 when capturing design of
form with
application logic
[BUG:757541] DESCAP: CDI-21600 error reported when
capturing with
application logic
Fixed In Ver: 6.0
[BUG:926383] Duplicate of [BUG:757541] This has been fixed in
2.1.2 patch
779559. However you would be advised to apply a later patch
such as 855635
which fixes more bugs in this area.
7. Make sure that all objects that are referenced by the form have
been
captured into the repository before capturing the form.
8. A CDI-21600 will occur if a lookup usage displays only one
column of
datatype DATE or if the column of datatype DATE is displayed
as the first
item in the block.
Workaround
Add more column usages to the lookup block and do not
display the DATE data
type column usage as the first item in the block.
9. [BUG:810472] CDI-21600 when 'Argument in Caller' is set
Fixed In Ver: 6.5.3.0
Workaround
Make sure that you have an argument in the called module that
is mapped to
the "Argument Passed Value" in the calling module. The only
way to get this
mapping back once the APV has the <Module Argument> label
is to delete it
and recreate it.
10. [BUG:801736] CDI-21600 on design capture of a form with
subclassed object
Fixed In Ver: 6.0.3.1.0 (backport)
Fixed In Ver: 6.5
You have an item that has been subclassed to an object.
Checking the Design
Capture option 'Capture Control Blocks' causes the CDI-21600
error. Uncheck
'Capture Control Blocks' and the problem does not occur. Open
the FMB in
Forms*Builder and look at Data Blocks -> Items. Break the link
to the
object, save the FMB, and the form will capture (similar to
[BUG:794872]).
Alternatively, ensure the link can be established.
11. [BUG:850436] CDI-21600 on generation of a form with template
having
subclassed object group
You try to generate a form out of Designer that uses a user-
defined
template. If a collection of objects in the template is grouped
into an
object group, dragged into the object library and then either
copied or
subclassed into a form, when the form is generated you get a
CDI-21600
error.
12. [BUG:822659] Module generation fails (CDI-21600) with multi-
column PK having
long prompt text
Fixed In Ver: 6.5.3.2
Module generation with multi-column primary key having long
prompt text
causes CDI-21600 with preference MSGSFT set.
Workaround
Shorten the prompt text of PKs may not be not applicable. You
may loose end
user information.
You may have the same problem with a mandatory compound
FK. CASEOFG tries to
generate a message '<P1> must be entered', where <P1>
contains all the
prompts of the bound items from the FK. If you reduce the
length of the
prompts, or set MSGSFT = NULL or WEDI = S or property
Mandatory?=No, it
works correctly.
13. [BUG:792542] Capturing application logic causes CDI-21600
(V2 style
triggers)
Fixed In Ver: 6.5.5
After removal of the v2 triggers, the form captures/merges OK
on 5.0.24.8,
provided patch 875027 has not been applied.
14. [BUG:790877] CDI-21600 if the primary/foreign keys have no
key components
Fixed In Ver: 6.5.11
Generating a module with tables having a primary key not
correctly defined
(no PK component) will cause a CDI-21600 error. This can
occur when
unloading a module from the RON. If you pick up the module
(and only the
module) in the unload set, the table and its PK are unloaded as
a skeleton.
Loading the .DAT file into a new application will create a PK
without a
component.
15. [BUG:771549] CDI-21600 if cannot connect to the DB with
connect string in
Options (Compile)
Fixed In Ver: 6.5.13
If you cannot connect to the DB with the connect string
specified in options
(Compile), the forms generator will fail with CDI-21600.
This problem occurs when you cannot connect to the DB
because:
- the username or password is wrong;
- or the SQL*Net alias is not defined in the TNSNAMES.ORA
file;
- or the SQL*Net listener is not started;
- or the DB is down.
16. [BUG:785106] CDI-21600 when generate master detail form
with preserve layout
[BUG:855812] is a duplicate of this bug.
Fixed In Ver: 5.0.24.6.0 (Bug:860426 Backport request for 2.1.2)
Fixed In Ver: 6.0
Fixed In Ver: 6.5.3
You have a master-detail Form with the Master having items
partly on a TAB
Canvas. Generate Module works OK. You enter Forms Builder
and move some
items on the tabs (just small changes, items are still on the
same tabs).
You change the look of the Detail and change Records
Displayed. Now in
Designer you generate the Module with Preserve Layout. You
get a CDI-21600
error. The problem might reproduce without doing any changes
in Forms
Builder, just by generating with Preserve Layout.
17. [BUG:891306] If primary key column of lookup in check
constraint comment of
base table
Fixed In Ver: 6.5.5
Workaround
Do not use the name of the bound item that is based on the
primary key
column of the lookup table in a check constraint comment of
the base table.
18. [BUG:896026] Forms gen throws assertion failure in
CVINI/BUILDACTIONITEM@/CV/CVI/CVIBNI.CPP
Fixed In Ver: 6.5.7
A problem is caused by a PL/SQL definition (function, package,
procedure)
being defined as a called module for the module you are trying
to generate.
To resolve the problem and enable the module to be generated,
remove all
Called Modules that are PL/SQL definitions (functions,
procedures or
packages).
See [NOTE:2107207.6] CDI-21600 during generation of module
or Assertion
Failure \cv\cvi\cvibni.cpp
19. [BUG:812333] CDI-21600 generating a web module after
adding an unbound item
Fixed In Ver: 6.5.3.0
Backport [BUG:1280667] raised to fix by 6.0.3.9
You add an unbound item (SQL expression) to a Web module.
When you try to
generate the module you get a CDI-21600 error. If you delete the
unbound
item the Web module generates correctly.
In a test case the problem occurred during validation of the
derivation
text, if the master module component was in a different module.
A workaround
was to rearrange module components so that this was not the
case.
20. [BUG:1627963] CCVDIAG::TRACEGENERATORMESSAGE
WHEN GENERATING INCORRECT
DERIVATION EXPRESSION
Message
CDR-21605: Failed while processing Module <mod> in function
CCVDiag::TraceGeneratorMessage BOF
Cause
The generator failed due to an unexpected error - the
error indicates the object the generator was processing
when it failed.
Helena -
Error while generating forms library files
Hi,
I am trying to apply patch 7651091 as a prereq for 11845888, but it got failed with message
The following Oracle Forms objects did not generate successfully:
au resource JTFGDIAG.pll
au resource JTFSCGNT.pll
au resource JTF_GRID.pll
au resource ASTBOMAN.pll
au resource ASTRCINT.pll
au resource CSSRFND.pll
au resource CSSRTSK.pll
au resource APPCORE.pll
au resource APPDAYPK.pll
au resource FNDCONC.pll
au resource FNDSQF.pll
au resource CSSRISR.pll
au resource CSSRWKB.pll
au resource CSCSECPS.pll
au resource CSPPLPLN.pll
au resource CSPPLSPR.pll
au resource CSPTRREC.pll
au resource CSPTRVMO.pll
au resource CSUTILS.pll
au resource CSCCCCUS.pll
au resource CSCMNTPN.pll
au resource APPCORE2.pll
au resource APPFLDR.pll
au resource CSCSEDPN.pll
au resource CSCUTILS.pll
au resource CSCCCCRC.pll
au resource CUSTOM.pll
au resource FNDAPLT.pll
au resource FNDATTCH.pll
au resource VERT.pll
au resource VERT2.pll
au resource VERT3.pll
au resource APPTREE.pll
au resource VERT4.pll
au resource JTFTKMAN.pll
au resource VERT5.pll
au resource VERT1.pll
au resource JTFNOTES.pll
au resource OKCEXEVT.pll
au resource OKCKSRCH.pll
au resource OKCADART.pll
au resource OKSACTEV.pll
au resource OKCEXPOR.pll
au resource OKCTREE.pll
au resource OKSAUDET.pll
An error occurred while generating Oracle Forms library files.
Continue as if it were successful [No] :
I tried adadmin for generating form files, there also got error.
Document followed is 762891.1.
OS: hp ux Itanium
APP : 12.1.1
DB : 11.1.0.7
Please anyone help me out finding the solution.
Thanks
kumarHi;
Please see below thread, follow steps. If its not help please update thread
Oracle Forms didn't generate successfully INVOBGEN.pll, INVRSVFM.pll
Regard
Helios -
Error while generating forms from Designer 2000
Hi,
The following error was encountered while trying to generate forms from the Designer ( using Design Editor ) .
CDI-23564 : "C:\ORAWIN95\BIN\CF50G32.DLL" could not be loaded or does not exist . Please check that the product has been installed correctly .
But the specified dll actually exists in the specified path .
Pls clarify ( send mail to [email protected])
Thanks
Eugene Xavier
nullThis is from http://metalink.oracle.com/ site - Technical libraries - Oracle Designer - Collected CDI-21600 errors,fixes and workarounds:
The CDI-21600 error message means that the generator is hitting an unhandled
exception, also known as a GPF (general protection fault). The CDI-21600 error
masks the underlying exception error. To see the real error do the following:
1. Go into the Registry Editor (REGEDIT).
2. Navigate to HKEY_LOCAL_MACHINE\software\oracle\des2_70
3. Set EXCEPT_HANDLING to 0 (by default it is 1).
Repeat the action that resulted in the error.
I have read this article and it seems that there is not such bug, but ... ?
Maybe this will be a little help for you.
Helena -
hi all,
i try to generate forms from designer and i have the following error
CDG-01338 ERROR: Module test: Failed to load form F:\Ora9iDSHome\CGENF61\ADMIN\ofgwebt.fmb
i verify that the form ofgwebt.fmb exists in the directory F:\Ora9iDSHome\CGENF61\ADMIN. i don't know why it doesn't load this form
i need help
thanks in advanceThere may be some problems with your template. For example your template has a PL/SQL library or an Object library wich cannot be found. Therefore open the template in Forms Builder.
Regards,
Harm -
CDI-23564 error when generating FORM.
Hi,
After installing Designer 6.0 and Patchset 1 (6.0.3.5) ,when generating FORM , system always prompt that it could not load CFG60.DLL. Had check that CFG60.DLL exists in orant/BIN and also in Window registry. Reformatted hard disk, change hard disk, tried on WIN98 and WIN2000, still the same result.
Thanks in advance!!!The error message is misleading.
Install Developer2000 appropiate version.
Designer install only some report and graphics run time file.
It solved me the problem.
Regards,
Otto Bertalan
Otto Bertalan
null -
CDG-03516 ERROR: While generating form in Designer 10g
Hi Gurus,
We have recently migrated from 9i to 10g. We are not able to generate few forms and getting the below error message:
"CDG-03516 ERROR: Module NSP0070: This module contains or references an object outside of the current workarea"
We found that for one of the table there is an entity which is shared from another container which was excluded in the workarea.
We have the same entity in a different container that exists in the workarea.
Any idea how to change the reference of the entity from the old excluded container to the current container that exists in the workare without much impact.
Thanks in advance for your solution.
Regards,
VinodhAn Entity should not matter.
You need to have the tables generated before you can generate a form.
If you are now missing a table then that will stop the form generation.
Michael -
R 6018 unexpected heap error when generating forms
When generating a form in Designer i get the following error:
r 6018 unexpected heap error
Has anyone else encountered it before with forms?
Kind Regards
Maurice NiezenYou put the question to wrong forum. If it is regarding to Oracle Forms, then post to Oracle Forms forum. If it is regarding to Oracle Designer, then post to Designer Forum. This is the forum for Oracle Reports.
Thanks,
-Shaun -
Dear all,
I have a problem while genetaing form-16 .
when I entered all required fields in selection screen and trying to genarate form16 ,it is showing this error.
"Requested TemSe object does not exist"
can anybody reslove this issue as early as this is year ending issue which should be solved immediately.
tcode: pc00_m40_f16
Thanks in dvance.Check TCODE PU12 & SP11.
Regards,
Amit -
Error In Generating the PDF Form
Hi,
When I'm trying to activate the PDF Form, I got a message asying Error while Generating the PDF Form.
Can we debugg the Form, if yes, can body tell me how to with this process.
Any pointers would be a great Help.
ThankQ
Rohini.Hi Om,
I need to fix this issue and I had taken help from Rohini.
I will try to explain the issue in detail.
I am trying to execute Tax Reporter Transaction PU19. Iam executing Quarterly Form 941 for USA for a Tax Company and a Period. This report gives an output Log and the log had generated errors in the log section General errors and Warnings.
The errors are :
Errors in generating the PDF Form : HR_F_941 and
Errors in generating the PDF Form : HR_F_941_SCHED_B
As we are new to the PDF Forms we don't know why the report has generated and how to find out by debugging or any other way.
So I need to find out how the above errors can be identified?
Thanks and Regards,
Madhan. -
Error in generating PDF Based form - SUI Report
Hi,
We are running Quarterly reports for Unemployment reporting at USA using tax reporter.
We are not able to see the complete spool output for the Wage Type Listings but only just 1 page. In the tax reporter log we get the error "Error in generating PDF Based form HR_F_WLIST_CA" for respective states.
Any idea how to resolve this.
We are on ERP 6.04.
Thanks,Hi,
I think its Basis problem.Ask basis gyus to repair the connection and try again.
Regards,
Manoj. -
Application error while generating PDF form
Hello there,
I am getting the message "Application error while generating PDF form" and when you hover it has additional information Message Class HREIC_APPL - Message number 258.
I get this upon doing the following steps:
1. Enter SAP R3, enter HREIC on the transaction code input.
2. Enter EIC, Activity Search. Searched for an Activity, selected it and click the "PRINT" button.
3. After clicking the PRINT button, I get the error message "Application error while generating PDF form".
Installed this on development box, did the same configuration in test system, but still I get this error. ADS Configuration is working fine and configured fine.
Is there anything else that is needed to be checked? like Ports, Firewalls, etc?
Thanks a lot.Be sure that the RFC name is "ADS" and not anything else.
Thanks. -
Compilation error while generating the form in linux
Hello everyone,
I am using Oracle Designer ver10.1.2.4 in windows to generate the forms with standard object library ofgwebol.olb and template form ofgwebt.fmb. form (with both .fmb and .fmx files) are generated without errors. Also when I open the forms in separately they compiles without errors. But when I copy the same .fmb file into linux enviroment and compile it using frmcmp.sh userid=user/password@database module_type=form compile_all=yes module=form_name it gives following errors.
$> frmcmp.sh userid=odin/odin@ontw10g module_ty
pe=form compile_all=yes module=LOGIN_SCHERM
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
FRM-18108: Failed to load the following objects.
Source Module:ofgwebol.olb
Source Object: CGSO$CHAR_DO
Source Module:ofgwebol.olb
Source Object: CGSO$CHAR_DO
Source Module:ofgwebol.olb
Source Object: CGSO$BLOCK
Source Module:ofgwebol.olb
Source Object: CGSO$CANVAS
Source Module:ofgwebol.olb
Source Object: CGSO$WINDOW
Compiling function CGTE$CHECK_CONSTRAINT_VIO...
No compilation errors.
Compiling procedure CGTE$INLOGGEN_ERRORS...
No compilation errors.
L/SQL ERROR 0 at line 17, column 3
Statement ignored
PL/SQL ERROR 201 at line 36, column 3
identifier 'CGNV$.NAV_CLOSE_FORMS' must be declared
PL/SQL ERROR 0 at line 36, column 3
Statement ignored
PL/SQL ERROR 201 at line 37, column 3
identifier 'CGNV$.NAV_OPENING_WND' must be declared
PL/SQL ERROR 0 at line 37, column 3
Statement ignored
Compiling KEY-HELP trigger on form...
No compilation errors.
Compiling WHEN-WINDOW-ACTIVATED trigger on form...
Compilation error on WHEN-WINDOW-ACTIVATED trigger on form:
PL/SQL ERROR 201 at line 6, column 8
identifier 'CGNV$GET_ITEM_WINDOW' must be declared
PL/SQL ERROR 0 at line 4, column 3
Statement ignored
Compiling POST-TEXT-ITEM trigger on form...
Compilation error on POST-TEXT-ITEM trigger on form:
PL/SQL ERROR 201 at line 4, column 3
identifier 'CGNV$.STORE_WND_ITEM' must be declared
PL/SQL ERROR 0 at line 4, column 3
Statement ignored
Compiling WHEN-WINDOW-CLOSED trigger on form...
Compilation error on WHEN-WINDOW-CLOSED trigger on form:
PL/SQL ERROR 201 at line 5, column 3
identifier 'CGNV$.TERMINATE_WINDOW' must be declared
PL/SQL ERROR 0 at line 5, column 3
Statement ignored
Compiling WHEN-FORM-NAVIGATE trigger on form...
Compilation error on WHEN-FORM-NAVIGATE trigger on form:
PL/SQL ERROR 201 at line 3, column 3
identifier 'CGNV$.REMOVE_CHILD_FORM' must be declared
PL/SQL ERROR 0 at line 3, column 3
Statement ignored
Compiling KEY-EXIT trigger on form...
Compilation error on KEY-EXIT trigger on form:
PL/SQL ERROR 201 at line 5, column 3
identifier 'CGNV$.NAV_ENTER_QUERY' must be declared
PL/SQL ERROR 0 at line 5, column 3
Statement ignored
PL/SQL ERROR 201 at line 9, column 5
identifier 'CGNV$.CLOSE_ALL_WINDOWS' must be declared
PL/SQL ERROR 0 at line 9, column 5
Statement ignored
Compiling KEY-CLRFRM trigger on form...
No compilation errors.
Compiling ON-ERROR trigger on INLOGGEN data block...
No compilation errors.
Compiling KEY-PREV-ITEM trigger on AGB_ID item in INLOGGEN data block...
Compilation error on KEY-PREV-ITEM trigger on AGB_ID item in INLOGGEN data block
PL/SQL ERROR 201 at line 4, column 3
identifier 'CGNV$GO_PREV_ITEM' must be declared
PL/SQL ERROR 0 at line 4, column 3
Statement ignored
Compiling KEY-NEXT-ITEM trigger on AGB_NAAM item in INLOGGEN data block...
Compilation error on KEY-NEXT-ITEM trigger on AGB_NAAM item in INLOGGEN data blo
ck:
PL/SQL ERROR 201 at line 4, column 3
identifier 'CGNV$GO_NEXT_ITEM' must be declared
PL/SQL ERROR 0 at line 4, column 3
Statement ignored
Compilation errors have occurred.
Form not created
I think some standard library are missing in Linux environment. But I do not know the name of them and neither I can find. Please suggest the what need to be done to resolve the problem. The reason I am compiling the form in Linux is that I can run the form in windows because of corrupted installation of OC4j.
Thanking you all much in advance.
Edited by: Deepank on Dec 2, 2008 1:49 AMDeepank-
When generating forms from Designer, Designer attaches libraries - like ofgmes.pll, ofgnavl.pll, etc. You will need to copy these libraries to the same directory where your forms reside on your Linux box. To find out what libraries ate attached to your form, open it on your windows PC after generating it from Designer and you will see the attached libraries. Also, watch out for the case-sensitivity of Linux. If you have the Designer libraries on your linux box and you still get errors, try changing the case of the names of the libraries.
Hope this helps,
Dan
Maybe you are looking for
-
Hi All I want to initialize the Employment Status to Active employee that is 3. Does any body know how can I do it. Thnaks in advance. Regards AJ
-
How to open JTree in browser?
Hi Friends, 1)I have a tree which is displayed using swing ,If i clicks on the node of the tree i want to display some details in a browser.How can i do it? 2)Is it possible to display a tree created by JTree in a browser
-
TS3448 When trying to download the latest version of itunes i get an error message
When trying to download the latest version of itunes i get the following error message "There was a problem with the Windows installer package. A program required for install to complete could not be run. Contact your support personnel or package ven
-
I want to categorize my photos by month, e.g., all photos taken in November in the keyword "nov" without regard to year. I can do this by brute force by finding Novembers in 2007 and categorizing them, followed by Novembers in 2006 ... back to 2000 w
-
O365 Workflow not able to read/write via REST to list on a subsite
Hi Guys, I'm facing an issue that i would like to read and the write to a list which is located on a sub site (same site collection https://server/sites/web/subsite/) with a Workflow using REST API (located in https://server/sites/web/). Let me give