Error in generating reference number of process

Hi All Masters,
I'm new in HCM P&F.
Currently I have a problem. I was running a sample process or copied process from the sample. Clicking 'check and send'. Still OK.
But when I clicked 'Send' button, I got an error message displayed 'Error in generating reference number of process'
Would you please help me what's wrong with that? FYI, I've tried to activate Case Management, but maybe, there is still any loss in that area?
Thank you for your help
Regards,
Pradita Herdiansyah

Hi Otto,
Neither did I. I don't have any complete resources. Maybe actually there are exists somewhere, but just I don't find it yet.
I try to learn and doing that by watching this forum and sap help/doc, just maybe there are other people who have same obstacles with me in developing this and then I will get solutions for it.
Have a nice day...
Regards,
Pradita Herdiansyah

Similar Messages

Error while generating document through bursting process

<?xml version="1.0" encoding="UTF-8" ?>
- <BURS_REPORT>
<REQUESTID>29462818</REQUESTID>
<PARENT_REQUESTID>29462816</PARENT_REQUESTID>
<REPORT_DESC>RDA Invoice Print Selected Invoices XML</REPORT_DESC>
<OUTPUT_FILE>/applog/common/app/RDDEV3/out/RDDEV3_uspvloradev1/o29462818.zip</OUTPUT_FILE>
- <DOCUMENT_STATUS>
<KEY />
<OUTPUT_TYPE>pdf</OUTPUT_TYPE>
<DELIVERY />
<OUTPUT />
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>

Hi,
only MM documents will be reveresed through MR8M transaction code.
so what ever document you have created in MIRO and want to reverese it.
enter the same document number and do the MR8M transaction.
then the debit will be credit and credit will be debited.
when you do the reversal original value will be zero and gets knock off.
so, redo the process.
Regards,
Padma

Error While Generating Sequence Number. Contact your system Administrator

Hi All,
I have developed a form to provide our client with 'an easy to fill' User Interface. This form will be used instead of the standard form present in Business Suite.
Some columns of the table, on which form is based, are getting populated via generation of sequence numbers.
Now the problem is, after deploying custom form developed by me in the instance, Standard form is showing this error
" Error While Generating the Sequence Number. Please contact the System Administrator "
I am unable to trace why this error had started appearing..
Any suggestions would be of great help...
Thanks in Advance,..

Forms version 6i,
Database version 9.2.0.6.0
Sequences which I am using are used there in Standard form also..
So evrytime i need to save the record, I am selecting NEXTVAL of it into
the respective item of the datablock..

Error when Generating Document Number

Hi Friends,
I am trying to generate Document Number which uses C1-DOC-NBR and generate Document Number . when i click on Freeze/Complete button of bill ,the following error is coming .
Document Sequence for Issuing Center HITECH with Branch 1011 and Document Type C1IN
not found
But i already attached issue center to the user ,SA characterstic type ie(public/non public),and all other parameters for that algorithm.
pls help to solve this error.
Thanks&Regards
sivaram

You need to verify the configuration of "Issuing Center", also ensure that "HITECH" Issuing Center is part of the User's Characteristic Value as defined under Document Number Details algorithm on the Installation Record.

Adding a reference number to form central

Hi, I need to be able to add an auto generated reference number to specific forms.

Hi,
If you’re a form author, you will seeing the auto-generated a reference numbers in response table, along with add rows manually or submitted responses. but these reference numbers is unable to copy. you might be copy a reference numbers from excel , and paste them to your specific forms or tables.
Thanks,
Guanshuai

ORA-00020: maximum number of processes 1000 exceeded

Hello,
Oracle 10.2.0.4.0
O/S: Windows Server 2003-64 bits
RAM: 32Gb
Instance: opext
show SGA
Total System Global Area 10284433408 bytes
Fixed Size 2180960 bytes
Variable Size 1574353056 bytes
Database Buffers 8690597888 bytes
Redo Buffers 17301504 bytes
Today at 8:01 am we've got this error:
ORA-00020: maximum number of processes 1000 exceeded
That incident was reported in a trace file (opext_ora_8240.trc):
Dump file c:\oracle\product\10.2.0\admin\opext\bdump\opext_ora_8240.trc
Tue Jul 31 08:01:03 2012
ORACLE V10.2.0.4.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
Windows NT Version V5.2 Service Pack 2
CPU : 8 - type 8664, 1 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:18773M/32767M, Ph+PgF:66964M/80966M
Instance name: opext
Redo thread mounted by this instance: 1
Oracle process number: 0
Windows thread id: 8240, image: ORACLE.EXE
ORA-00020: maximum number of processes 1000 exceeded
Died during process startup with error 20 (seq=212441)
OPIRIP: Uncaught error 20. Error stack:
ORA-00020: maximum number of processes (1000) exceededThis was the first time in three years that happened an incident like this. Due my Windows server allows me to setup processes and sessions with a very high value, I did it when configuring this database for the first time.
select resource_name,initial_allocation, limit_value from V$RESOURCE_LIMIT;
RESOURCE_NAME     INITIAL_ALLOCATION     LIMIT_VALUE
processes     1000     1000
sessions     1105     1105
transactions     1215     UNLIMITEDI would like to know what application or process made that my database exceeds 1000 processes. I read that one possiblity is that there's a web app that open many connections to database and doesn't close them.
In my listener.log, I got this at 08:05 am:
31-JUL-2012 08:05:41 * service_update * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36578)) * establish * opext * 0
31-JUL-2012 08:05:47 * service_update * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36579)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36580)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36581)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36582)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36583)) * establish * opext * 0
31-JUL-2012 08:05:47 * (CONNECT_DATA=(SERVICE_NAME=opext)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=SRVXXX)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.1)(PORT=36584)) * establish * opext * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
Host SRVXXX is a server where a web app is and 192.168.1.1 is our firewall. May I think that this server was the one that made so many connections?
I checked alert.log, trc file and listener.log. What else can I check to determine what was the cause of this incident?

user521219 wrote:
Host SRVXXX is a server where a web app is and 192.168.1.1 is our firewall. May I think that this server was the one that made so many connections?
I checked alert.log, trc file and listener.log. What else can I check to determine what was the cause of this incident?check IIS logs
It could result from Denial of Service attack or trojan or virus infecting webserver

ORA-00020: maximum number of processes (500) exceeded

Problem Details:
In our Database we are getting huge number of open connection from remote system.
Let say, our application A and remote application name is B.
Some common users of application A are USER0, USER1, USER2.
Remote Application B uses USER0 to create views on application A's table through Database Link.
Those views (nearly 100) are accessed in application B at several places from the Java code.
Since those views are getting called almost all the times from the application B's code, DB link is in use almost all the time - holding many number of connections (check the first row of the query output).
Many times the open connections remaining high and any other application, users trying to connect to application A,
getting the ORA-00020 error.
Note :
1. Application B is very old application and does not use open DB link or close DB link.
2. Application B tried with "alter session close Database link xxx", it decrease the number of open connection but its degrading the performance of application B at large scale.
3. To cope up with this problem Application A recently incraesed the parameter process=500, but not sure if this limit can also be broken through Application B
Questions/Doubts:
1) What is best approach to handle this problem??
'alter session close database link xxx' is the only option from application B's point ??
What other approach can be taken??
2) We are not sure the risk associated with increasing the process parameter value ??
Appreciate your suggestion !!
SQL>conn / as sysdba
SQL> select substr(username,1,8),
       substr(machine,1,11),
       substr(module,1,40),
       substr(osuser,1,7),
       status,
       count(1)
from v$session
group by username, machine, module, osuser, status;
USERNAME MACHINE     STATUS                        OSUSER     COUNT(1)
USER0    remotedb9      INACTIVE                              oracle        450
USER1    app_dev        INACTIVE                              beaadmin        1
USER0    svr01test      ACTIVE                                bdgp_dev        1
USER1    app_test       INACTIVE                              bbk09           2
USER0    app_dev        ACTIVE                                dj0494          1
USER1    app_test       INACTIVE                              pd0269          2
USER2    app_test       INACTIVE                              oracle         12
USER0    app_dev        ACTIVE                                oracle          2
USER2    app_test       INACTIVE                              www             8
USER2    dbr9db01       ACTIVE                                oracle          2
USER2    svr01dv        INACTIVE                              bdgp_dev        1
USER0    app_dev        INACTIVE                              scott           3
USER2    app_test       INACTIVE                              clerk           2
USER2    moose          ACTIVE                                john            2
USER2    titan.homer    INACTIVE                              voipdu          1
NEWUSER floradbdv1     INACTIVE                              oracle          8
SYS      app_test       ACTIVE                                oracle          1
20 rows selected.
SQL>conn USER0@csmip_st
Enter password:
ERROR:
ORA-00020: maximum number of processes (500) exceeded
Warning: You are no longer connected to ORACLE.

semmsl in Linux tells what the max number of processes are. You have to make sure this is equal to the process parameter of all instances plus 10.
It is usually in /etc/sysctl.conf
kernel.sem = 250 32000 100 128
SEMMSL
The SEMMSL kernel parameter is used to control the maximum number of semaphores per semaphore set.
Oracle recommends setting SEMMSL to the largest PROCESS instance parameter setting in the init.ora file for all databases hosted on the Linux system plus 10. Also, Oracle recommends setting the SEMMSL to a value of no less than 100.
SEMMNI
The SEMMNI kernel parameter is used to control the maximum number of semaphore sets on the entire Linux system.
Oracle recommends setting the SEMMNI to a value of no less than 100.
SEMMNS
The SEMMNS kernel parameter is used to control the maximum number of semaphores (not semaphore sets) on the entire Linux system.
Oracle recommends setting the SEMMNS to the sum of the PROCESSES instance parameter setting for each database on the system, adding the largest PROCESSES twice, and then finally adding 10 for each Oracle database on the system. To summarize:
SEMMNS = sum of PROCESSES setting for each database on the system
+ ( 2 * [largest PROCESSES setting])
+ (10 * [number of databases on system]
To determine the maximum number of semaphores that can be allocated on a Linux system, use the following calculation. It will be the lesser of:
SEMMNS -or- (SEMMSL * SEMMNI)
SEMOPM
The SEMOPM kernel parameter is used to control the number of semaphore operations that can be performed per semop system call.
The semop system call (function) provides the ability to do operations for multiple semaphores with one semop system call. A semaphore set can have the maximum number of SEMMSL semaphores per semaphore set and is therefore recommended to set SEMOPM equal to SEMMSL.
Oracle recommends setting the SEMOPM to a value of no less than 100.
App B could try using connection pooling or something to reduce the number of connections to the DB.

I am unable to connect database this error ORA-00020: maximum number of

i issuing this command / as sysdba .getting this error
Enter user-name: / as sysdba
ERROR:
ORA-00020: maximum number of processes (300) exceeded
how to resolve this problem.it is verry verry urgent.

Hi
"Maximum number of processes exceeded" will be alerted when your database has received a request for connection from a process which is beyond the number of processes your database can allow for.
Please check your database parameters
show parameters processes
Couple of options:
a) If your database has been running for a while and if it's the first time you are recieving this error, please check why all of a sudden more and more processes have been created. You may want to investigate your application, users, etc
b) If it's a valid request and if it's the case that you haven't really configured enough processes, you will have to increase the PROCESSES parameter in your init file and restart the database. It's not a dynamic parameter. Also, make sure you increase the sessions parameter as well along with the processes.
Before you do this, you will also have to check if your OS has been configured for increasing the number of processes. Think it's semmsl in Unix.

ORA-00020: maximum number of processes (25) exceeded ... uh?

Hello,
I'm trying to run a distributed simulation (13 programs x host,
16 hosts) that uses oracle (normally in an HP) against oracle on
linux.
I can't start all the programs, after about 20 clients (+-) no
other program will come up, and if i try to log to oracle with
sqlplus i get:
ERROR:
ORA-00020: maximum number of processes (25) exceeded
Is this a static limit imposed in the version oracle is
distributing for testing purposes?
Also, i notice that one server process is started for each client
program. So the distributed version doesn't support multithreaded
servers? Or may be i configured it wrong?
-cristian
null

Cristian Ferretti (guest) wrote:
: Oleg (guest) wrote:
: : : ORA-00020: maximum number of processes (25) exceeded
: : ------>Check PROCESSES= line in you init<SID>.ora file. After
: you
: : change it, you have to restart database.
: : : Also, i notice that one server process is started for each
: : client
: : : program.
: : -----> Check the following parameters in the same file:
: : mts_dispatchers, mts_max_dispatchers, mts_servers,
: : mts_max_servers, mts_multiple_listeners, mts_listener_address
: processes=400
: mts_dispatchers="tcp,16"
: mts_dispatchers="ipc,1"
: mts_max_dispatchers=32
: mts_servers=16
: mts_max_servers=32
: mts_service=oralinux
: sessions=384
: Copyed them from the hp oracle config.
: but:
: [oralinux@toaster dbs]$ svrmgrl
: Oracle Server Manager Release 3.0.5.0.0 - Production
: (c) Copyright 1997, Oracle Corporation. All Rights Reserved.
: Oracle8 Release 8.0.5.0.0 - Production
: PL/SQL Release 8.0.5.0.0 - Production
: SVRMGR> connect internal
: Connected.
: SVRMGR> startup
: ORA-00101: invalid specification for system parameter
: MTS_DISPATCHERS
: ORA-00102: network protocol
(ADDRESS=(PARTIAL=YES)(PROTOCOL=tcp))
: cannot be used by dispatchers
: SVRMGR>
Erase all MTS_%
parameters from your init.ora files and try only with
processes=xxx
null

CRM Error. Reference Number C7CADDAC'

While creating a contact in our CRM 2013 solution we have been receiving this error message
'System.ServiceModel.Security.SecurityNegotiationException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #C7CADDAC'
Has anybody experienced something similar. The process worked beautifully in our QA environment, but it doesn't work in production.
Thanks for any help

Hello,
You should ask in the Microsoft Dynamics CRM Forum on the Microsoft Dynamics Community.
As Microsoft's Dynamics Community forums are on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Error while generating ARE doc. Internal number .

Error while generating ARE doc. Internal number .
Message no. 4F238
while creating ARE1 ,whilke saving the system is giving a message.
please help.
points will be rewarded.

check whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P

ERROR WHILE GENERATING ARE-1 doc internal number

Dear sir
while creating ARE-1 Doc following error getting
error while generating ARE 1 DOC internal number
message no : 4F238
I MAINTAIN ALL NO RANGE OBJECT ALSO THEN ALSO GETTING ERROR
Sl No
Object
Tocde
Module
After Closing the Year ;
Maintain the Number ranges for following number
range objects related to CIN for the New year
Excise/
Series Group
1
J_1IINTNUM
SNRO/SNUM
Internal Document number to be Generated
2
J_1IRG23A1
SNRO/SNUM
MM
RG23A PART1 number Range object
3
J_1IRG23A2
SNRO/SNUM
MM
RG23A PARTII number Range object
4
J_1IRG1
SNRO/SNUM
SD
RG1 Number range object
5
J_1IRG23C1
SNRO/SNUM
MM
RG23C Part1 Number Range Object
6
J_1IRG23C2
SNRO/SNUM
MM
RG23C PartII Number Range Object
7
J_1IPLA2
SNRO/SNUM
MM
PLA PartII number Range Object
8
J_1IINTPR2
SNRO/SNUM
SD
Despatch Serial number
9
J_1IEXCLOC
SNRO/SNUM
SD
DOMESTIC EXCISE INVOICE
10
J_1IDEPINV
SNRO/SNUM
SD
EXCISE INVOICE FOR PLANT STO
11
J_1IEXCEXP
SNRO/SNUM
SD
Export excise invoice number range
12
J_1I57FC
SNRO/SNUM
MM
57FC Number Range Object
13
J_1IARE1
SNRO/SNUM
SD
ARE1 Series Group
14
J_1IARE3
SNRO/SNUM
SD
ARE3
15
J_1IBOND
SNRO/SNUM
SD
Bond Maintain (2007)
16
J_1ILIC
SNRO/SNUM
SD
Licence capture - CT3 maintain (2007)
THANKS & REGARD:
ROHIT NARSALE
9624886654

check whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P

Error Message - Reference number of a document from Back Error

Hi,
I created proforma invoice but it is not transferred to GTS. I tried to transfer manually, status shows it is released but there is an error at the top saying 'Reference number of a document from Back Error'. When I checked it in GTS, there is no custom document for proforma invoice. I checked configuration in ECC as well as GTS regarding activation of BADis, document types etc. everything looks fine. Can you please help me where to look at it and get it solved?
Thanks in advance.

Hi Manohar,
Are you trying to create an Export Declaration? If so, is this the first time, or has it worked ok previously but failed this time?
In case it's the first time, have you made sure that:
The Billing Type is set for transfer to GTS?
The Billing Type is mapped in GTS?
The Item Category is mapped in GTS?
The proforma is actually an export (Shipping Point and Ship-to address not both in the EU)?
Do you see any related entries in Transaction SM58?
Do you see any related log entries in the GTS transfer log?
Regards,
Dave

Collect Files Error:Bad Reference Number (-51)

When using Collect Files to push my project to a renderfarms watch folder it stops when the transfer is to a specific source file:
AVI (Blackmagic SDI)
YUV 10bit
uncompressed
16 GB
The error message is:
BAD REFERENCE NUMBER (-51)
what does this mean?
Rendering on my local machine works fine.

What is the file size and to what network storage do you transfer? Sounds like the file size is simply too large and the server refuses to accept it or at least the server is unable to provide enough contiguous storage space to accomodate it...
Mylenium

Internal error when generating a process flow.

Hello,
I got a message asking to contact Oracle Support.
Using OWB 9.2.0.4.0 we are unable to generate a process flow.
The process flows validates without any errors or warnings but gets problems when we deploying then process flow.
This is the message we received::
oracle.wh.repos.sdk.exceptions.WBException: Internal Error: ProcessPackageGenerator.generate WBGeneratedObject[] is null or length 0 for PDC_PKG
oracle.wh.repos.sdk.exceptions.WBException: Internal Error: ProcessPackageGenerator.generate WBGeneratedObject[] is null or length 0 for PDC_PKG at oracle.wh.ui.runtime.application.WHRuntimeProgress.notifyInternalError(WHRuntimeProgress.java:180) at oracle.wh.ui.runtime.application.WHRuntimeGeneration.run(WHRuntimeGeneration.java:98) \nCMPException message and stack trace:\njava.lang.Exception: Internal Error: ProcessPackageGenerator.generate WBGeneratedObject[] is null or length 0 for PDC_PKG at oracle.wh.service.impl.runtime.generation.ProcessPackageGenerator.generate(ProcessPackageGenerator.java:123) at oracle.wh.service.impl.runtime.generation.ProcessPackageGenerator.generateProcessPackage(ProcessPackageGenerator.java:451) at oracle.wh.service.impl.runtime.generation.ProcessPackageGenerator.generate(ProcessPackageGenerator.java:97) at oracle.wh.service.impl.runtime.generation.DeploymentGenerator.generate(DeploymentGenerator.java:75) at oracle.wh.service.impl.runtime.UnitControllerImpl.defineUnit(UnitControllerImpl.java:130) at oracle.wh.service.impl.runtime.UnitControllerImpl.<init>(UnitControllerImpl.java:78) at oracle.wh.service.impl.runtime.DeploymentControllerImpl.defineControllerList(DeploymentControllerImpl.java:249) at oracle.wh.service.impl.runtime.DeploymentControllerImpl.<init>(DeploymentControllerImpl.java:50) at oracle.wh.service.impl.runtime.DeploymentSpecificationImpl.createController(DeploymentSpecificationImpl.java:395) at oracle.wh.ui.runtime.application.WHRuntimeGeneration.run(WHRuntimeGeneration.java:86)

this is just a shot in the dark, and a pure guess/try approach but try to recreate the process flow and see if you still get the same error. I do recall having something similar happening to me and what I ended up doing was dropping the process flow and recreate it. That was an easy option as the PF was very simple.

Error in generating reference number of process

Similar Messages

Maybe you are looking for