Error in generating SID for 0Requid (187.98)

Hi All,
We have transported requests into the Quality and when iam trying to run the infopackage for master data through flat file, it pops up this erro msg which says "Error in generating SID for 0REQUID (187.98)".
This is the case with all master data infopackages.
Also in the quality system, when i change the path for flat file assignment in infopackage and click on save, it pops up for a request. As far as i know it should not ask for a requst in Quality system
Please guide me to resolve this as soon as possible.
Regards,
Neil

0Requid :187.98
what was this request ID...
go to RSRQ and give the request ID and execute...it gives the load monitor...
chk the load to which it belongs to either master or transaction...
if it belongs to master...then try to find the object to which it was loaded...and schedule the change run for the same object....
rgds,

Similar Messages

How to generate SIDs for a particular range of data for a DSO ?

Hi All,
Please let me know if there is any way to generate SIDs for a particular range of data for a DSO which does not have any SID values. I need this as when i am trying to load data from DSO to InfoCube it's taking a lot of time. When i tried to find the reason behind it, i came to know that most of the time is going in SID creation for the data which is getting loaded. Please share some solution for the same. Thanks...

Hi,
Try this.
Create an internal table and populated it with the values present in the F4 help of the field. Then in AT SELECTION-SCREEN event check the value of the field with the values in the internal table and display the appropriate message.
Sharin.

Error in generating quota for unpaid leaves

hello gurus,
I have 3 Absence Quotas - (1) Annual Leave (2) Long Service Leave (3) Sick Leave
I have attached the same reduction rule for all 3 abs quotas
I generated Leave without pay for a day in the month of May 2011.
When generating quotas for May 2011 for Annual & Sick Leave its generating for 30 days but for Long Service Leave its generating for 31 days
Any idea how the quota generation goes wrong only for Long Service Leave ??
pls help!!
rgds,

0Requid :187.98
what was this request ID...
go to RSRQ and give the request ID and execute...it gives the load monitor...
chk the load to which it belongs to either master or transaction...
if it belongs to master...then try to find the object to which it was loaded...and schedule the change run for the same object....
rgds,

OWB Error while generating Code for a mapping

I have a simple mapping loading from a source to a flat file. When I try to generate code it gives me the following Error
VLD-2357: Target Data File name not specified for file <target Flat file name>.
I am new to OWB so any help on the same will be greatly appreciated. How can I specify target Data File name in the mapping configuration under Flat file operators
Thanks
Anish

If you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David

Error while generating code for deployment

I am getting the following error:
Error generating findTest1ByMarks(java.lang.Integer) query for Bean Test1(Abstract scheme name=Test1) Error=query cannot be pushed down
Query="select ..."
Could someone help me?
I am trying to generate code of Container Managed Entity Bean in WSAD 5.0.
Thanks

If you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David

Error in Generating letter for correspondence in Recruitment

dear Experts,
I am working on Recruitment module in SAP HCM. Have 1 problem when I tried to generate the letter from the recruitment activity e.g. receipt of application
When I tried to generate it, the system will call up Microsoft Word, but then it displayed a small screen, asking in which file format I would convert the file e.g. plain text, encoded text, RTF, HTML, etc.
When I selected RTF, it would give me error message "unknown error". When I selected "plain text" or "encoded text", it would generate error message "Internal error in SAP OLE document container control"
Did anyone face problem like that? would really appreciate if you could share the remedy
kindest rgds
salomon
settings:
the feature for WPROC is set to RTF
I am using standard texts in recruitment e.g. WW.
Microsoft word version : MS Word 2002

hi Sameer,
I have tried to update the installation of MS Word 2002, it didn't work. Then I installed the MS Office 2003 which include MS Word 2002, still it gave me the same error.
There is something about the office integration with the SAP, which I suspect the problem is on installation, although I am not sure which part.
anyway, thanks for the effort.
Would keep trying to find the answer to this
cheers
salomon

Error in generating Datasource for a view(EKBE)

Hi All, i require to make a view(ZDS_GRDETAILS) on top the table EKBE(History per Purchasing Document).
I have used tables T001(Company Codes) and EKPO(Purchasing Document Item). Now there is no error when i activate the view. But when im trying to make the datasource in RSO2, then i get the following message while trying to save the z-Datasource(ZDS_GRDETAILS)
"Invalid extract structure template ZDS_GRDETAILS of DataSource ZDS_GRDETAILS"
Long text :
Diagnosis
You tried to generate an extract structure with the template structure ZDS_GRDETAILS. This operation failed, because the template structure quantity fields or currency fields, for example, field MENGE refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
Now the field MENGE refers to the field MEINS in EKPO.
That is why i had included it in the view. Similar errors occur for all quantity fields.
What did i miss out?

Hi Prasun,
I think you could try including mara table in your view and join on matnr.
Also refer all the quantity fields of MARA.
I think to find the reference quantity field it needs to know the material whose quantity field is to be referenced.
Regards,
Sunmit.

Error in generating Profile for Child Role

Hi Experts,
My requirement is to chnage profile for child roles created. I'm using FM 'PRGN_AUTO_GENERATE_PROFILE_NEW' to generate the Profile for child role. However it gives an error saying "Open authorizations or org. levels in role & => no profile generated"
when I execute it. Infact the same error occurs when i run it for parent role also.
But prior to attaching the child role to parent role, profile gets generated with no issues.
Kindly help.
Regards,
Anjali

Hello All/Experts,
I am also getting same error. how to resolve this?
regards
A

Error in generating exports for EP system for system copy

Dear gurus
We have EP SR1 on 32 bits and we need to change our EP to latest. But to do so we were planning to generate exports of the current system and put it on the latest one. While doind so we are getting the error in "export from java database" phase. The error is mentioned below
Could anyone please suggest how can we fix this
ERROR 2010-01-21 11:35:45 CJS-30049 Execution of JLoad tool 'C:\j2sdk1.4.2_12\bin\java.exe -classpath C:\usr\sap\DEN\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload
den/sapmnt/DEN/SYS/global/security/lib/tools/iaik_jce.jar;
den/sapmnt/DEN/SYS/global/security/lib/tools/iaik_jsse.jar;
den/sapmnt/DEN/SYS/global/security/lib/tools/iaik_smime.jar;
den/sapmnt/DEN/SYS/global/security/lib/tools/iaik_ssl.jar;
den/sapmnt/DEN/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/jload.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/DEN/SYS/exe/uc/NTI386/mssjdbc/base.jar;C:/usr/sap/DEN/SYS/exe/uc/NTI386/mssjdbc/util.jar;C:/usr/sap/DEN/SYS/exe/uc/NTI386/mssjdbc/sqlserver.jar;C:/usr/sap/DEN/SYS/exe/uc/NTI386/mssjdbc/spy.jar -sec DEN,jdbc/pool/DEN,
den/sapmnt/DEN/SYS/global/security/data/SecStore.properties,
den/sapmnt/DEN/SYS/global/security/data/SecStore.key -dataDir C:/DEN_EXPORT/JAVA/JDMP -exclude "D@C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/negativTableListForJload.txt" -remove_trailing_blanks "C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/removeTrailingBlanks.txt" -convert_empty_LOBs "C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/convertEmptyLobs.txt" -convert_empty_strings "C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/convertEmptyStrings.txt" -convert_empty_binary "C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/convertEmptyBinary.txt"' aborts with return code 1.
SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/jload.java.log' for more information.
Thanks and Regards
Mohammed

Hi,
I am doing system copy of BI7.0 (Abap+Java) stack, I am getting error in "export from java database" phase as mentioned below.
When i tried to run the query mentioned in SAP Note 1120872: ,
SQL> DELETE FROM BC_DDDBTABLERT WHERE NAME = 'CAF_GP_R3USRMPGCFG';
DELETE FROM BC_DDDBTABLERT WHERE NAME = 'CAF_GP_R3USRMPGCFG'
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> DELETE FROM BC_DDDBTABLERT WHERE NAME = 'CAF_GP_IF_CONTEXT';
DELETE FROM BC_DDDBTABLERT WHERE NAME = 'CAF_GP_IF_CONTEXT'
ERROR at line 1:
ORA-00942: table or view does not exist
Kindly help me on this.
Regards,
Sampath.
SAP INST error log:
ERROR 2010-10-15 10:32:35
CJS-30049 Execution of JLoad tool '/usr/java/j2sdk1.4.2_12/bin/java -classpath /usr/sap/BD1/SYS/global/sltools/sharedlib/launcher.jar -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload /usr/sap/BD1/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/BD1/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/BD1/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/BD1/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/BD1/SYS/global/security/lib/tools/w3c_http.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/jload.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/antlr.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/exception.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/jddi.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/logging.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/offlineconfiguration.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/opensqlsta.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar:/oracle/client/10x_32/instantclient/ojdbc14.jar -sec BD1,jdbc/pool/BD1,/usr/sap/BD1/SYS/global/security/data/SecStore.properties,/usr/sap/BD1/SYS/global/security/data/SecStore.key -dataDir /oracle/expocopy/JAVA/JDMP -remove_trailing_blanks /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/removeTrailingBlanks.txt -convert_empty_LOBs /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyLobs.txt -convert_empty_strings /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyStrings.txt -convert_empty_binary /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyBinary.txt' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and '/tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/jload.java.log' for more information.
Log details for jload.java.log:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Oct 15, 2010 10:32:33 AM com.sap.inst.jload.Jload main
INFO: Jload -sec BD1,jdbc/pool/BD1,/usr/sap/BD1/SYS/global/security/data/SecStore.properties,/usr/sap/BD1/SYS/global/security/data/SecStore.key -dataDir /oracle/expocopy/JAVA/JDMP -remove_trailing_blanks /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/removeTrailingBlanks.txt -convert_empty_LOBs /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyLobs.txt -convert_empty_strings /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyStrings.txt -convert_empty_binary /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyBinary.txt
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.DBConnection connectViaSecureStore
INFO: connected to BD1 on jdbc/pool/BD1
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.ExcludedObjects addObjects
INFO: excluded objects (type TB): [EP_ATTR_HEADERS, EP_ATTR_VALUES, J2EE_CONFIGENTRY]
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.ExcludedObjects addObjects
INFO: excluded objects (type EL): [EP_ATTR_HEADERS, KMC_DBRM_CONTENT, EP_ATTR_VALUES, J2EE_CONFIGENTRY]
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.ExcludedObjects addObjects
INFO: excluded objects (type ES): [EP_ATTR_HEADERS, KMC_DBRM_CONTENT, BC_SCVERSION, J2EE_CONFIGENTRY]
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.ExcludedObjects addObjects
INFO: excluded objects (type EB): [KMC_DBRM_CONTENT, J2EE_CONFIGENTRY]
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.JobStatus readStatus
INFO: trying to read status file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/EXPORT.sta
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.JobStatus readStatus
INFO: commencing restart
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.Jload dbExport
SEVERE: DB Error during export of CAF_GP_IF_CONTEXT
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.Jload printSQLException
SEVERE: Message: ORA-00942: table or view does not exist
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.Jload printSQLException
SEVERE: SQLState: 42000
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.Jload printSQLException
SEVERE: ErrorCode: 942
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected

Error in generating invoice for a free goods order

here's the scenario: i took the pricing procedure of my standard order and basically changed PROO from R to S for statistical. rest is the same. gave the new pricing procedure a name starting with Z, then created a document procedure, then created a new order type for free goods sale and assigned everything the way it should be. i still need the taxes because customer will be billed for taxes, just not the base price. everything works fine till i get to billing and try releasing that to accounting, i get this error: Tax code O1 does not appear in any G/L account item. the FICO teams tells me it's because i put PROO as statistical and the system doesn't know where to get the tax from for the invoice. my pricing procedure is as follows:
10     0     PR00     Bag Price                     X          2               ERL
20     0     ZSED     Special Excise Duty     10     10     X          10               ZSD
30     0     ZMWS     Sales Tax     10     10     X          10               MWS
40     0          Net Value     20     30     X
45     0     BO02     Material Rebate     40             X                         ERB     ERU
50     0          Discount     45
60     0     ZPFR     Freight                     X
980     0     WGST     WHT GST 1%     10                       164
985     0     WCOD     WHT 3.5%     65                       164
990     0                                                                  A
any suggestions on what to do and what might be wrong? thanks!

Hi Prasun,
I think you could try including mara table in your view and join on matnr.
Also refer all the quantity fields of MARA.
I think to find the reference quantity field it needs to know the material whose quantity field is to be referenced.
Regards,
Sunmit.

Error - In generating URL for a Excel File in WebDynpro Project

Hi,
In my WebDynpro Application, i have a EXCEL file ("Test.xls") and it is kept in the below mentioned location.
Project->src->mimes->Components-><my component>
This is the code i have used to generate URL.
IWDWebResource webRes = WDWebResource.getWebResource(wdComponentAPI.getDeployableObjectPart(), WDWebResourceType.XLS,     "Test.xls");
String excelFileURL = webRes.getAbsoluteURL();
wdContext.currentContextElement().setExcelFileURL(excelFileURL);
i have assigned the URL to context element which in turn is assigned to LinkToURL UI element.
I always get this error "Invalid URL=/webdynpro/resources/local/RigsOnMove/Components/ndc.maintain_rigmove.MaintainRigMoveComp/Test.xls".
Please let me know your solution(s) to the above mentioned issue/problem.
Thanks
Senthil

Hi Senthil,
your code seems to be correct! Probabily your file is test.xls (NOT Test.xls with the first letter in uppercase).
Try to write:
IWDWebResource webRes = WDWebResource.getWebResource(wdComponentAPI.getDeployableObjectPart(), WDWebResourceType.XLS,     "test.xls");
Hope this help,
Vito

Usage error while generating spool for adobe forms

I need to create a function module which would be called from a BRF. The function module must generate an adobe form and sent to the spool.
I get usage error at the call form function module level. could someone suggest if anything is missing in the below code.
""Local Interface:
*" IMPORTING
*" REFERENCE(I_FORM_NAME) TYPE FPNAME
*" REFERENCE(I_BP_DETAILS) TYPE ZRP_STRU_RTRN_BP_DETAILS
*" REFERENCE(I_AMT_DETAILS) TYPE ZRP_STRU_RTRN_AMT_DETAILS
*" EXPORTING
*" REFERENCE(E_RETURN) TYPE BAPIRET2_T
DATA : gv_fm_name TYPE rs38l_fnam,
ga_outputparams TYPE sfpoutputparams,
gs_docparams TYPE sfpdocparams,
le_result TYPE sfpjoboutput,
gs_output TYPE fpformoutput,
l_return TYPE bapiret2..
Get the Form function module name
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = i_form_name
IMPORTING
e_funcname = gv_fm_name
E_INTERFACE_TYPE =
Open Print Job
ga_outputparams-device = 'PRINTER'.
ga_outputparams-nodialog = 'X'.
ga_outputparams-preview = space.
ga_outputparams-dest = 'LP01'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = ga_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
call the generated Function Module
gs_docparams-langu = 'E'.
gs_docparams-country = 'US'.
CALL FUNCTION gv_fm_name "'/1BCDWB/SM00000014'
EXPORTING
/1bcdwb/docparams = gs_docparams
is_bp_details = i_bp_details
is_return_details = i_amt_details
IMPORTING
/1bcdwb/formoutput = gs_output
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc EQ 0.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
e_result = le_result
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
ELSE.
l_return-type = 'E'.
l_return-message = 'Print Error'.
APPEND l_return TO e_return.
ENDIF.

Suri , Have you solve this please replly as i am facing such a problem

DSD SPE_CNDDYP Replication error in Middleware side for DSD Project

Hello Everyone,
                        We had configured the DSD backend and DSD connector . Now we are doing configuration for the Middleware client and during the Replication of the SYNC BO ID particularly for the SYNC BO ID SPE_CNDDYP we are getting an error saying to check the log in MEREP_LOG. If we see there I see the below error log :
001       1282
          1          1 I        02/11/2008 10:07:55 Z_MEREP_GEN_T01_____SPE_CNDTYP has started for run number 0000001282 and runtime counter 1
          2          1 E        02/11/2008 10:07:55 Default value missing: Value ID=LANGKEY, depends on=1, exclusive=
          3          1 I        02/11/2008 10:07:55 Z_MEREP_GEN_T01_____SPE_CNDTYP has finished for run number 0000001282 and runtime counter 1.
I am not sure what is mean by "Default value missing: Value ID=LANGKEY, depends on=1, exclusive=
Thanks for your help in advance.
We are in ECC6.0 SP13 & MI Server 7.0
Please let me know if you have any questions.
Thanks,
Greetson Shunmugasundaram

Hi Greetson,
thisis not that difficult. You can maintain some settings while sync. These are defined in
MEREP_SBUILDER
enter the name of the syncbo nd then
open the settings -> default values menu.
You should be able to enter the correct setting there.
I am not 100% sure about the SETTINGS name, but it is in the menu bar - I think the 4th menu point.
Hope it helps!
Regards,
Oliver

Error while generating the report on Test env (for divide condition)

Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advance

Is anyone having any idea about it...

Error while generating CW kin for the new BG created for Taiwan

HiAll,
Please provide your help to resolve this issue,
Iam getting error while generating CW kin for the new BG created for Taiwan, China.
Error : Value TW is not a Valid context for the Descriptive Flexfield Person Developer DF.
Please let me know, is there any step missed to create CW kins for new BG's.
Thanks-
Sowmya.
Edited by: user13419037 on Jul 2, 2012 3:41 AM

Hello ,
Your solution can be solved by enabling the displayed check Box in Location Address DFF
Thanks
Bindu

Error in generating SID for 0Requid (187.98)

Similar Messages

Maybe you are looking for