Error in Generic Delta using Function Module
Hi All,
I have created one function module by copying the RSAX_BIW_GET_DATA_SIMPLE module.
Now when i am giving this in RSO2 Tcode and trying to save it its giving error that
Required Table does not Exist..
Please Help.
Hi
Look at below links
Re: Generic function module for delta - which FM ?
http://www.jt77.com/business-warehouse/work-flow-03485.html
Similar Messages
-
Doubt about generic delta using function module.
Hi,
I have the following scenario.
I have to create a generic data source having delta using funcation module.
The full load works fine, but the delta load not.
I don't know, if always the field that was specified as a delta, must be part of the cursor in this case AFRU~LAEDA
This is my cursor:
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT AFIHAUFNR AFIHADDAT AFIHIPHAS AFIHILART AFIH~AKKNZ
AFIHPLKNZ AFIHILOAN AFIHIWERK AS ZPLANPLANT AFIHEQUNR
ILOA~TPLNR
AFKOGSTRP AFKOGLTRP AFKOGSTRS AFKOGLTRS AFKOGSTRI AFKOGETRI AFKO~FTRMI
AUFKAEDAT AUFKERDAT AUFKWERKS AUFKKOSTL AUFKKOKRS AUFKSOWRK AUFK~OBJNR
AUFKAUART AUFKVAPLZ
CRHD~ARBPL
TKA01~WAERS AS ZCOSTP_ML_UM
FROM AFIH
INNER JOIN AFKO ON AFIHAUFNR = AFKOAUFNR
LEFT OUTER JOIN ILOA ON ILOAILOAN = AFIHILOAN
INNER JOIN AUFK ON AFIHAUFNR = AUFKAUFNR
INNER JOIN TKA01 ON AUFKKOKRS = TKA01KOKRS
LEFT OUTER JOIN CRHD ON CRHDOBJID = AFIHGEWRK
WHERE AFIH~AUFNR in L_R_AUFNR
AND AFIH~EQUNR in L_R_EQUNR
GROUP BY AFIHAUFNR AFIHADDAT AFIHIPHAS AFIHILART AFIHAKKNZ AFIHPLKNZ AFIH~ILOAN
AFIHIWERK AFIHEQUNR
ILOA~TPLNR
AFKOGSTRP AFKOGLTRP AFKOGSTRS AFKOGLTRS AFKOGSTRI AFKOGETRI AFKO~FTRMI
AUFKAEDAT AUFKERDAT AUFKWERKS AUFKKOSTL AUFKKOKRS AUFKSOWRK
AUFKOBJNR AUFKAUART AUFK~VAPLZ
CRHD~ARBPL
TKA01~WAERS.
For each aufnr I must go to the afru table and totalize the real work (IWNW) and real duration (IDAUR) when AFRUSTZHL > 0 and totalize too when AFRUSTZHL = 0 but with sign to negative.
This is my external query, i need that the field AFRU~LAEDA must be taken as delta field:
SELECT AFRUERSDA AFRULAEDA AFRUSTZHL SUM( AFRUISMNW ) AS ZTRA_REAL AFRUISMNE AS ISMNE SUM( AFRUIDAUR ) AS ZDURAC_REAL AFRU~IDAUE AS IDAUE
INTO CORRESPONDING FIELDS OF TABLE WT_AFRU_OM
FROM AFRU
WHERE AUFNR = WT_ZCUROM-AUFNR
AND AFRU~STZHL = 0
GROUP BY AFRUERSDA AFRULAEDA AFRUSTZHL AFRUAUFNR AFRUISMNE AFRUIDAUE AFRUISMNW AFRUIDAUR
order by AFRUERSDA AFRULAEDA AFRUSTZHL AFRUIDAUE AFRU~ISMNE.
IF sy-subrc = 0.
CLEAR WT_AFRU_OM2.
REFRESH WT_AFRU_OM2.
SELECT AFRUERSDA AFRULAEDA AFRUSTZHL SUM( AFRUISMNW ) AS ZTRA_REAL AFRUISMNE AS ISMNE SUM( AFRUIDAUR ) AS ZDURAC_REAL AFRU~IDAUE AS IDAUE
INTO CORRESPONDING FIELDS OF TABLE WT_AFRU_OM2
FROM AFRU
WHERE AUFNR = WT_ZCUROM-AUFNR
AND AFRU~STZHL > 0
GROUP BY AFRUERSDA AFRULAEDA AFRUSTZHL AFRUAUFNR AFRUISMNE AFRUIDAUE AFRUISMNW AFRUIDAUR
order by AFRUERSDA AFRULAEDA AFRUSTZHL AFRUIDAUE AFRU~ISMNE.
IF sy-subrc = 0.
LOOP AT WT_AFRU_OM2.
WT_AFRU_OM2-ZTRA_REAL = WT_AFRU_OM2-ZTRA_REAL * -1.
WT_AFRU_OM2-ZDURAC_REAL = WT_AFRU_OM2-ZDURAC_REAL * -1.
APPEND WT_AFRU_OM2 TO WT_AFRU_OM.
ENDLOOP.
ENDIF.
LOOP AT WT_AFRU_OM.
"fjro incluir el clear y el move
CLEAR WT_DATOS_OM.
MOVE-CORRESPONDING W_DATOS_BASE to WT_DATOS_OM.
MOVE-CORRESPONDING WT_AFRU_OM TO WT_DATOS_OM.
APPEND WT_DATOS_OM.
APPEND WT_DATOS_OM TO WT_ESTFIN_OM.
ENDLOOP.
ENDIF.
It's possible set the delta field in a external query of the cursor.
Best Regards
Ramon Sanchez
Edited by: RAMON SANCHEZ on Aug 20, 2010 2:46 PMHi Sri,
here some coding, I hope this helps!
first, get the delta-field
LOOP AT s_s_if-t_select INTO l_s_select.
CASE l_s_select-fieldnm.
WHEN 'ZDATE'.
MOVE-CORRESPONDING l_s_select TO r_date.
IF r_date-high IS INITIAL OR r_date-high = space.
r_date-high = '9991231'.
ENDIF.
APPEND r_date.
ENDCASE.
ENDLOOP.
Cursor öffnen
OPEN CURSOR WITH HOLD s_cursor FOR
SELECT * FROM
WHERE ....
AND erdat in r_date
AND aedat IN r_date.
FETCH NEXT CURSOR s_cursor INTO CORRESPONDING FIELDS OF table e_t_data package size s_s_if-maxsize.
regards
Siggi
PS: Note that this coding only works for a very straight forward extraction.
Message was edited by: Siegfried Szameitat -
Generic delta using function module with two fields AEDAT AND ERDAT
Hi,
i have scenario that i have to create a generic data source having delta using funcation module and the delta speci fields are AEDAT AND ERDAT . Is there possibility with out using these two fields ( i mean AEDAT AND ERDAT) in the extract structure can i create the data source . and provide sample code for me . it is very urgent.
waiting for the reply,
sri.cHi Sri,
here some coding, I hope this helps!
first, get the delta-field
LOOP AT s_s_if-t_select INTO l_s_select.
CASE l_s_select-fieldnm.
WHEN 'ZDATE'.
MOVE-CORRESPONDING l_s_select TO r_date.
IF r_date-high IS INITIAL OR r_date-high = space.
r_date-high = '9991231'.
ENDIF.
APPEND r_date.
ENDCASE.
ENDLOOP.
Cursor öffnen
OPEN CURSOR WITH HOLD s_cursor FOR
SELECT * FROM
WHERE ....
AND erdat in r_date
AND aedat IN r_date.
FETCH NEXT CURSOR s_cursor INTO CORRESPONDING FIELDS OF table e_t_data package size s_s_if-maxsize.
regards
Siggi
PS: Note that this coding only works for a very straight forward extraction.
Message was edited by: Siegfried Szameitat -
Error in Generic extraction using function module
Hi,
I have created a generic datasource which will will have the same fields as table tcurr(except client field).
whenever i am trying to check it in rsa3..it is giving the error"Error in extracting data".
Can you kindly suggest where is the mistake?
The code of my function module is as follows:
TABLES: ZMOHSTRUCT. "Name of the structure
DATA: L_S_SELECT TYPE SBIWA_S_SELECT.
STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize,
g_counter_datapakid LIKE SY-TABIX,
g_cursor TYPE CURSOR.
RANGES: L_R_GDATU FOR ZMOHSTRUCT-GDATU.
IF i_initflag = sbiwa_c_flag_on.
CASE I_ISOURCE.
WHEN 'ZDSTCURR'.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF.
log_write 'E' "message type
'R3' "message class
'009' "message number
I_ISOURCE "message variable 1
' '. "message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO g_t_select.
g_s_interface-requnr = i_requnr.
g_s_interface-isource = i_isource.
g_s_interface-maxsize = i_maxsize.
APPEND LINES OF i_t_fields TO g_t_fields.
ELSE.
IF g_counter_datapakid = 0.
LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'GDATU'.
MOVE-CORRESPONDING l_s_select TO L_R_GDATU.
APPEND L_R_GDATU.
ENDLOOP.
l_maxsize = g_s_interface-maxsize.
OPEN CURSOR WITH HOLD g_cursor FOR
SELECT KURST
FCURR
TCURR
GDATU
UKURS
FFACT
TFACT
FROM TCURR
WHERE GDATU IN L_R_GDATU.
ENDIF.
FETCH NEXT CURSOR g_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE l_maxsize.
IF sy-subrc <> 0.
CLOSE CURSOR g_cursor.
RAISE no_more_data.
ENDIF.
g_counter_datapakid = g_counter_datapakid + 1.
ENDIF.
Regards,
MohuaHi
Look at below links
Re: Generic function module for delta - which FM ?
http://www.jt77.com/business-warehouse/work-flow-03485.html -
Error occurred while loading Generic extraction using Function module
Hi all
I'm trying to do INIT for Generic Extractor using Function module, but i'm getting error as "Error occurred in the source system"
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Job terminated in source system --> Request set to red
Message no. RSM078
Can u help plz....Hi Vishnu
This are the Job log details i found in source system...Can u tell what whould be the problem?
Message
Job started
Step 001 started (program SBIE0001, variant &0000000002861, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZYFI102
RLOGSYS =
REQUNR = REQU_D9Y4CZDQULRIHRRVU33KOLQZO
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 0 *
abap/heap_area_total.......... 10737418240 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 3000000 *
ztta/roll_extension........... 2000000000 *
No authorization for Acct type D
Job cancelled after system exception ERROR_MESSAGE
Thanks in advance
Edited by: MohanDP on Feb 25, 2011 11:58 AM
Edited by: MohanDP on Feb 25, 2011 12:01 PM -
Create a generic extractor using Function module, what steps must I follow
Hello gurus team
I need to Create a generic extractor using Function module, what steps must I follow?
Just I have a function module not estructures or something, only the program.... and I have intented to do it in rso2 using the fm option, but give an error... somebody can helpme???
BRHi,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
http://help.sap.com/saphelp_nw04/helpdata/en/86/1c8c3e94243446e10000000a114084/frameset.htm
Thanks,
JituK -
Can anybody explain me creating Generic Datasource using Function module?
Hi,
can anybody explain me creating Generic Datasource using Function module?
Thax in advance,
Ravi.Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " E_T_DATA " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
<b>is an example</b>
1.Create a function group .
2. Structure ZTEST123
ZMATNR MATNR CHAR 18 0 Material Number
ZMTART MTART CHAR 4 0 Material type
ZMBRSH MBRSH CHAR 1 0 Industry sector
ZMATKL MATKL CHAR 9 0 Material group
ZBISMT BISMT CHAR 18 0 Old material number
ZMAKTX MAKTX CHAR 40 0 Material description
3. Create function module (i.e. ZTEST .) .
FM - YMARA_DATA_TRNS
FUNCTION YMARA_DATA_TRNS.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZTEST123 OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
data : ZTEST123 type ZTEST123 occurs 0 with header line.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
S_COUNTER_DATAPAKID LIKE SY-TABIX.
DATA: begin of t_mara occurs 0,
ZMATNR type MATNR,
ZMTART type MTART,
ZMBRSH type MBRSH,
ZMATKL type MATKL,
ZBISMT type BISMT,
end of t_mara.
DATA: begin of t_makt occurs 0,
ZMATNR type MATNR,
ZMAKTX type MAKTX,
end of t_makt.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Check DataSource validity
CASE I_DSOURCE.
WHEN 'ZZMARA_DATA'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
select MATNR
MTART
MBRSH
MATKL
BISMT
from mara up to 10 rows
into table t_mara.
if not t_mara[] is initial.
select MATNR
maktx
from makt
into table t_makt
for all entries in t_mara
where matnr = t_mara-zmatnr.
endif.
loop at t_mara.
read table t_makt with key zmatnr = t_mara-zmatnr.
ZTEST123-zmatnr = t_mara-zmatnr.
ZTEST123-ZMTART = t_mara-ZMTART.
ZTEST123-ZBISMT = t_mara-ZBISMT.
ZTEST123-ZMBRSH = t_mara-ZMBRSH.
ZTEST123-ZMATKL = t_mara-ZMATKL.
ZTEST123-zmaktx = t_makt-zmaktx.
append ZTEST123.
clear ZTEST123.
endloop.
clear E_T_DATA.
refresh E_T_DATA.
E_T_DATA[] = ZTEST123[].
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extractio
ENDFUNCTION.
3. Create the data source using transaction (RSO2).
4. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter E_T_DATA.
5. Test the datasource in R/3 using transaction RSA3.
6. Transfer the data source to BW System and replicate it in the BW-System. -
Creating a Generic Datasource using Function Module
Hi Guru's
We are tryin to create a Generic datasource using function module, we have found few old how to guides for doing the same but it is not effective and need to be altered. Can anyone suggest me the latest step by step procedure to create the above, also if you have the how to guide kindly paste the link as it will be a great help at this point.
Thanks in advance
Regards
LiquidHi,
Please goto the Following links :-
PDF
1) http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?quicklink=index&overridelayout=true
2) http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33?quicklink=index&overridelayout=true
SAP Forum
3) Re: DataSouce based on FM
4) http://forums.sdn.sap.com/post!reply.jspa?messageID=10050614
5) https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
6) Re: Generic datasource with functional module
7) Generic Extractor (FM based) - Delta Enabled
Regards
Obaid -
Generic Extraction - Using Function Modules
Hi Friends,
Can you pl let me know the step by step process for creating generic extraction using function module?
Thanks in Advance.
Regards,
Ari.
Please search the forum before posting a thread
Edited by: Pravender on Aug 5, 2010 7:31 PMHi,
Plz find this doc.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33.
And go this link...
http://www.sdn.sap.com/irj/scn/advancedsearch?query=genericextractionwithfunctionmadule
Regards.....KP
Edited by: kundan.sap on Aug 5, 2010 4:35 PM -
Generic Extractor using Function module with Complex Interface
Hi,
Has anyone created Generic extractor using Function module with Complex Interface?
What is the difference between Complex and Simple interface in Function module?
Pls explain.
Thanks,
GopalHi,
Go through this link.....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
GTR -
Creating generic datasource using function module in R/3 4.6c
Hi,
I am not able to see the option (in TC RSO2) to create generic datasource using function module in R/3 4.6c. Is there any special plug in or some SAP Note to be applied to get the option ?
Waiting for a quick response.
Thanks and Regards,
DeepakHi Sat,
Thanks for the reply.
I know that creating generic datasource from function module is available in R/3 4.7.
In 4.6c version there are only two options available. They are Extraction from DB View and Extraction from SAP Query.
The third option i.e. Extraction from Function Module is not available in 4.6c. I wanted to know if there is any plugin that needs to be installed to get this option.
Thanks and Regards,
Deepak -
Error in Data selection in R/3 Generic Extraction Using function Modules
Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know itHi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea. -
Delta with Generic Extractor using function module
Hi,
I have created an extractor using function module and it work fine (mode FULL)
It's an extractor based on the FM RSAX_BIW_GET_DATA_SIMPLE.
In TCODE RSO2, I have specified a delta field (AEDAT).
In table ROOSOURCE, this extractor is defined by :
DELTA = AIE
EXMETHOD = F1
When I extract data in Init mode, there is no problem. But delta don't extract any entries.
When I trace with TCODE ST01, in Init mode the function module is executed but in delta mode, there is no trace of any use of this function module.
I don't know how to do to make this extractor work fine in delta mode.Hi Pascal,
The same function module i have used and succesffuly doing delta using it. So it works for both full & delta.
How ur testing it and where are you testing it for delta.
Do the delta testing through BI end. Set the
As u have already set the delta field., now Follow below steps:
1. First set the safety interval upper limit to -1, so that it will extract the delta data of 1 day back records also.
2. Please make sure wether the delta records are available or not in r/3, if there is no records to be fetched in for delta then u will not be able to track out wether delta is working or not.
3. Now do the init from BI end first. Delta initialization without data transfer. - It will give u green status with 1 dummmy record.
4. Now do the delta. It will extract the delta records.
Before that make sure that if any selection your giving in Infopackage should be met out by these delta records.
Thanks
Dipika -
Generic delta with function module
Hi Gurus,
Is it possible to create a generic DataSource with delta support using function module following the queue delta mechanism (u can get some function moduel in MCEX function group, and check the outbound delta queue before and after update in transaction smq1.
I can store the delta data using qRFC and collective update mechanism. but I don't know how to create a generic data with delta and how to attach a rfc destination (& logical system) to the data source. The Source system information is stored in the table "ROOSGEN". Is there any configuration setting required to do the same.
Regards,
JugalJugal,
What I understand you to be asking is if it is possible to create a generic delta extractor which uses the delta queue. If this indeed is your question the answer is yes.
First you need to create your data source so it is visible via tx RSA5 and need to make sure that the delta type (ie ABR, AIM)is set appropriately for the datasource.
The issue however is determining from where you will associate your delta hook (when will you write to the queue)? I have in the past utilized BTE's, Business Transaction Events to write information out to the delta queue, you can see a list of available BTE's in your system via tx FINF.
Once you find a place to write your deltas from you call the below FM with the appropriate datasource.
RSC1_TRFC_QUEUE_WRITE.
Once you have done this the standard BW extractor for deltas will pull the information from the delta queue. But from what I understand you just want to know how to associate the data with the delta and that is the FM listed above.
Hope this helps,
Cheers,
Scott
> Hi Gurus,
>
> Is it possible to create a generic DataSource with
> delta support using function module following the
> queue delta mechanism (u can get some function moduel
> in MCEX function group, and check the outbound delta
> queue before and after update in transaction smq1.
> I can store the delta data using qRFC and collective
> update mechanism. but I don't know how to create a
> generic data with delta and how to attach a rfc
> destination (& logical system) to the data source.
> The Source system information is stored in the table
> "ROOSGEN". Is there any configuration setting
> required to do the same.
>
> Regards,
> Jugal -
Urgent: Problems in Generic Deltas by Function Module
Hi BW Experts,
My requirement is to extract text from CRM to BW using Zfunction module, copy of RSAX_BIW_GET_SIMPLE_DATA
which works fine for full loads but the problem arises only when i go for generic deltas. My code in FM for Deltas is:
LOOP AT s_s_if-t_select INTO l_s_select.
CASE l_s_select-fieldnm.
WHEN 'ZDATE'.
s_date_from = l_s_select-low.
s_date_to = l_s_select-high.
WHEN OTHERS.
ENDCASE.
ENDLOOP.
IF s_date_from IS INITIAL.
s_date_from = '20060401'.
ENDIF.
IF s_date_to IS INITIAL.
s_date_to = '99991231'.
ENDIF.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT * FROM STXH
WHERE TDOBJECT = 'CRM_ORDERH'
AND TDID = 'A002'
AND TDSPRAS = sy-langu
and TDLDATE between s_date_from and s_date_to
or tdfdate between s_date_from and s_date_to.
ENDIF.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE wa_stxh
PACKAGE SIZE S_S_IF-MAXSIZE.
TDFDATE is creation date and TDLDATE is changed on
My extract structure contains Zdate(TDLDATE), Ztext1,2,3, Key field and langu in RSO2 I have selected calday in generic delta and Zdate as field Nm and upper limit as 1 and lower limit as space in settings and new status for changed records button.
Did I missed something because when i check in RSA7 i didnot see any changed records under totals column and i tried to load without it into BW than i didnot received single record evenafter changes.Would anyone suggest me the good solution for it I appreciate it in advance. I have seen lot of posts in SDN but I didnot find this type of secenario anywhere.
Thanks in advance
Regards
KishoreKishore,
go through the thread... which i provided for Generic DS using function for CRM Texts.
Re: Urgent: Extraction through function module
Any questions please let me know. If you have any questions update the thread with your mail id.
Replace the code with ...
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'ZDATE'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_TDLDATE.
APPEND L_R_TDLDATE.
ENDLOOP.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT * FROM STXH
WHERE TDOBJECT = <Text Object>
AND TDID = <Text ID >
AND TDSPRAS = sy-langu
AND (TDLDATE IN L_R_TDLDATE
or TDFDATE IN L_R_TDLDATE).
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE wa_stxh
PACKAGE SIZE S_S_IF-MAXSIZE.
L_R_TDLDATE will be calculted by the system. Internally, system will save the Last Delta date(you need to enable this field for Generic delta).
all the best.
Regards,
Nagesh Ganisetti.
Maybe you are looking for
-
Accuracy of DVD player bit rate meters?
Anyone know why different DVD players would display drastically different bit rates as a DVD is playing? I have a 90-minute project (81 min. film and about 8 mins. of extras) authored w/ DVD Studio Pro to DVD-R, with the main film itself compressed u
-
Check info "Amount paid is showning with negative sign"
Hi ppl, After the RFFOUS_C program is run and after the check generated, If i go and check the "check inforamtion" in PAYR table. It is showing the paid amount as 2000.00- The amount is shown with a 'minus' sign at the end. What this means??? Please
-
Web Dynpro and Web Service Error
Hi experts, I followed the blog u201CDeveloping Web Services in J2EEu201D /people/lakshmi.prasad5/blog/2009/06/30/developing-web-services-in-j2ee-and-consuming-in-sap-netweaver-visual-composer-part1 and is very well explained and easy to follow. The
-
HT1651 How can I find my family pictures? I think I lost them when I went to yosimote
When I changed over to yosimite, is when I lost my family photos? Can I still find them? Help!! I went to family photos on my files.still can't find them
-
Hello Experts, I have a question regarding WIP service order costs. Can we post the costs of a WIP service order to a WBS element? IF so where do we link the service order and project/WBS Element? How do we post the costs to WBS elements? Appreciate