Error in GR reversal

Dear All,
When user trying to reverse GR, following error appears. But stock to be there for that material in MMBE.
"Deficit of Project Stock unr.1,00 PC 113-901290 3082 0001 Q"
Please advise how to proceed.
Regards
Edited by: Venkateshwaran Balaji Kannan on Sep 15, 2011 7:41 AM

Hi,
The GR taken for Un-restricted only.
In MMBE, i can see the stock for that material and 'Q' as special stock for the plant.
But in MD04, i couldn't see the material stock for that Plant.
Why the difference appears?
Please advice
Regards

Similar Messages

Error while uploading Reversing Journal using Webadi

Hi,
When uploading a reversing journal the following message is returned.... "Reversal Period must be supplied when Reverse Journal is set to Yes"
This is despite the Reversal period(P2-13) is in Open status.
Category          * List - Text     Standard reversing
Source          * List - Text     Spreadsheet
Currency          * List - Text     GBP
Period          List - Text     P1-13
Accounting Date     * List - Date     1/29/2013
Batch Name          Text     SS-CZN-7828012-070213-17:03
Journal Name          Text     SS-CZN-7828012-070213-17:03
Reverse Journal          List - Text     Yes
Reversal Period/Date     List - Text     P2-13
Any help?

Please see if these bugs help.
Bug 8236555 : REVERSAL PERIOD MUST BE SUPPLIED - ERROR UPLOAD MULT JOURNAL WITH BLANK LINE
Bug 11773472 : WEBADI ERROR: REVERSAL PERIOD MUST BE SUPPLIED WHEN REVERSE JOURNAL IS SET TO YE
Bug 14783874 : UNABLE TO LOAD GLADI JOURNAL WITH REVERSAL PERIOD IF REGIONAL SETTINGS ARE NOT S
If you still get the same error, please log a SR.
Thanks,
Hussein

System Lock Error while reset & reversing the cleared document - FBRA

Hi Experts,
Currently using t-code FBRA, when user trying to reset & reverse the cleared document , they are facing "System Lock Error". We have analyzed on this issue and found SAP note no. u201C487347 u2013FBRA: Overflow of the lock table in production systemu201D . After implementation of this note, SAP has created one new transaction code, FBRA_LOAC.
However, when we tried to reset & reverse the cleared document using t-code FBRA_LOAC, we face the same error.
Can you help me to resolve this issue ?
Thanks in advance.
Regards,
Manish

Hi:
We once faced these issue and got it resolved by extending parameter after extending the profile-parameter "enque/table_size", as per note note 13907. Do not forget the restart the server after extension.
Regards

BizTalk published WCF service throwing HTTP 404 error using ISA reverse proxy settings

I have published my schemas as a WCF service from BizTalk 2010 "Publish WCF Service" wizard. I used Wcf-basicHTTP adapter in receive port. I am able to run the service successfully on localhost IIS and I tested my biztalk solution by sending request using SOAP UI and got response successfully.... Now: Actually, I need to give this service endpoint to my vendor who will send request from outside my company's network i.e. internet. In my infrastrucrue BizTalk is behind the firewall so, we setup a REVERSE proxy server at DMZ layer and it is configured properly. I have tested a simple WCF service by replacing the localhost with Proxy server configured address <DNSName> and it worked absolutely fine. But when I change localhost in my BizTalk schema based published WCF service it is not working and I am getting following error. Really strugling to get it resolved. I wasted a whole 3 days....very upset. Please help me out by giving the detailed step solution. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /BizTalkServiceInstance/MyService.svc I am surprized why other c# code based WCF services are working fine with reverse proxy settings. Server Error in '/' Application. The resource cannot be found.Is there any special things to consider Biztalk exposed wcf servcie over ssl in IIS cluster with ISA

Hi Singam :)
First I would start by browsing any other files (files other than the one from WCF) just to ensure that the reverse-proxy’s redirection rules are set correctly. If you get the same 404 error when you try to access other service/files “through reverse-proxy”,
then it’s an issue in the redirection rule(s) in reverse-proxy.
If others are fine i.e. no issue in reverse-proxy setup as such, then try the following for WCF service's web.config file. I have seen this issue in WCF service (not just BizTalk’s artifacts exposed as service in reverse-proxy). Add serviceHostingEnvironment
config as show with in serviceModel section.
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
</system.serviceModel>
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Error During Confirmation Reversal of production Order

Dear experts
In production client during confirmation reversal for ,we are getting below error message
Enter only true account assignment.
Regards
sandeep Patil

Hi Sandeep,
If it's just a warning, press the enter key and it should post.
or then you will have to debug the reversal process to locate from where the error message gets triggered..
Regards,
R.Brahmankar

Error in MIRO Reversal - MR8M

Hi Experts,
User is getting the error while reversing the MIRO entry using T-code - MR8M
"Company Code / Cost Center number CTR belongs to business area BA1 not BA2".
I checked in ME23N and MIR4. In both the T-codes correct Business Area is used i.e. the BA2.
Please help where else I could look for the assignment of business area.
Thanks

Hi:
Please check out which business area has been maintained in your cost center master data in KS03 as being used in your transaction. It is quite possible that before reversal the cost center assignment has been changed between invocie posting date and its reversal date.
Regards

Getting Error while doing Reverse Engineering Processes.

Hi all,
I am new to ODI, i tried ODI with SAP ABAP, after i my all settings after doing reverse Engineer Processes, I cant able to see the Metadata browser while checking Log i am getting the below given error.
ODI-1217: Session Sap ERP Source (27001) fails with return code 7000.
ODI-1226: Step Sap ERP Source fails after 1 attempt(s).
ODI-1229: An error occurred while performing a Reverse operation on model code SAP_ERP_SOURCE.
Caused By: org.apache.bsf.BSFException: BeanShell script error: Sourced file: inline evaluation of: ``//////////////////////////////////////////////////////////////////////////////// . . . '' : Class: DestinationDataProvider not found in namespace : at Line: 275 : in file: inline evaluation of: ``//////////////////////////////////////////////////////////////////////////////// . . . '' : DestinationDataProvider
BSF info: Create Java Classes at line: 0 column: columnNo
Pl. help me to come out from this error.
bdharanr

Hi,
Thanks for the reply.
I am trying to reverse SAP tables. Initially the Reversal process stuck at Set MetaData step. I stopped the session and restarted it then Set MetaData completed successfully but Set FlexFields give the error.
Any idea?
Regards,
Arsalan.

Urgent--Error in MIRO reversal

Hi
While doing MIRO reversal system giving me error as "Error in account determination for VSE CAIN"
CAIN is my chart of accounts an VSE is transaction key for higher education cess.
I checked in VSE ,G/L is there.
Then I made Dr and Cr for same G/L in VSE.
Then system giving me error as "Balance is not zero."
What will be the reason?
How to solve this problem?
Its urgent pl?
Points sure for any help.

Enter the balance amount in the amount filed then you will not see this error.

Error in Settlement: "Reversal of settlements on Internal Order's"

Hi All,
Please help me with the below issue which is as follows:
"In October I did two settlements in error on internal
Orders A & B. This refers to assets X &
Y in co code XX".
"I need to reverse these settlements in November, I assume
I use KO88, but am concerned amount the FI posting".
I want to know what sort of analysis is to be done and precuation to be taken before reversing the settlements. Please help me this..
Thanks a ton in advance.
Regards,
Vinay

hi swatha.
for settlement of internal orders/PM orders KO88/KO8G is run but before execution you shoud see the following step as period end activity:
1.. calculate activity price (KSII)
2. Revaluation of actual price KON1/KON2
kkumar

F.05 Error 806 on Reverse Postings in SAPF100

Hello,
When I run F.05 (in test environment) current period postings complete ok, but I get Error 806 on my reverse postings. Has anyone seen this error and know what causes it? I have verified that the next posting period is open and that reverse postings should be done as they are on open items. I did not check the field "Bal. Sheet preparation valuation" as is recommended. The F.05 program was run on both open items and GL Balances.
Thank you,
Kathleen

Apologies for the long delay in closing out this question, but we resolved it - simple issue of not having the CO peirod open in QAS for the following period, which was not allowing the reverse postings. We only had originally had the FI period opened, not both, but once we did, the program worked perfectly as designed. Thanks all!

Runtime error on PGI reversal "OBJECTLIST_NOT_FOUND."

Hi Experts,
I am trying to reverse a PGI thru VL09 and I m getting runtime error " OBJECTLIST_NOT_FOUND".
After debugging I found that error is coming at the serial number status change.
34   CALL FUNCTION 'DOC_SERNR_STATUS_CHANGE'
   35        EXPORTING
   36             OBJKOPF              = TASER_SER01
   37             SERXX                = DA_SERXX
   38             OPERATION            = BELEG_SDLS
   39             J_VORGANG            = J_VORGANG
   40             COLLECTIVE_ENQUE     = CON_CHARX
   41        IMPORTING
   42             SERIAL_COMMIT        = DA_SERIAL_COMMIT
   43             STATUS_NOT_ALLOWED   = DA_STATUS_NOT_ALLOWED
   44        EXCEPTIONS
   45             OBJECTLIST_NOT_FOUND = 1.
   46 *           OTHERS               = 2
   47
   48   CASE SY-SUBRC.
   49     WHEN 1.
>>>>>       RAISE OBJECTLIST_NOT_FOUND.
   51   ENDCASE.
Please let me know how the PGI can be reversed.

Hi,
There´s a SAP note 853290 which could solve this dump. If not, then i would recommend to open a SAP ticket.
Best Regards,
Arminda Jack

Create Accounting error for receipt reversal

Hi
Hope every one is well and upbeat over here. I am facing an issue in the receivables module and some expert's kind assistance is required.
A client entered a Miscellaneous receipt, the customer made the payment through credit card. The receipt was later reversed, When the client runs the create accounting report, it gives the following error
Line Error Number Error Message
0 The accounted amount and entered amount for the subledger jounral entry line have different sign. Please inform your system administrator or support representative that:
The sources assigned to the accounting attributes Accounted Amount and Entered Amount have different sign for extract line number 738414. Please make sure the sources assigned to the two accounting attributes have same sign, or assign different sources to these accounting attributes.
there is another error message which is:
The subledger journal entry does not balance in the entered currency. Please verify the entered amounts on the journal entry lines.
Please provide me with a solution to this problem.
Regards
Salman Tariq

Please see these docs.
Invoice Apparoval Throws Error App-Sqlap-10000 Ap_etax_services_pkg.Synchronize_for_doc_seq [ID 1158523.1]
When Cancelling An Invoice User Receives Error APPSQLAP-10000 ORA-00000 normal, successful completion occured in AP_INVOICES_PKG.UPDATE_ROW [ID 886316.1]
Error When Canceling Invoices APP-SQLAP-10000 AP_ETAX_SERVICES_PKG [ID 974712.1]
Thanks,
Hussein

FRM 92050 error via a reverse proxy

Hi,
How can jinitiator on a client workstation on the internet connect through a reverse proxy to forms server?
I have practically no experience with this so please excuse my lack of terminology.
Here are some more details:
This successfully works from within the intranet.
The jinit.exe version is 1.1.8.19
Not sure of the forms server version.
From the Java Console:
proxyHost=null
proxyPort=0
connectMode=HTTP
ERROR: HTTPStrea.connect(),giving up after 10 failures.
On the forms screen the error message is: FRM-92050:Failed to connect to the Server: 10.121.191.9:9000
The firewall ports have 80 and 9000 open.
I have tried varying proxy and port entries in the jinititor console pointing to the external FQDN of the reverse proxy at 80 and 9000 and no good.
Any help or suggestions would be appreciated.
If any further info would be required, please let me know.
Thanks,
Kris

We came up with the new Forms Listener Servlet Architecture to resolve these issues. You can read about it in the Forms area on OTN.
It allows Forms to communicate to the server in a standard way, thereby working with firewalls and proxies.
Regards,
Robin Zimmermann
Forms Product Management

Nginx error with proxy reverse

Hi
I've installed nginx to protect a weblogic server, port 7001. I've installed a SSL certificate in nginx so any comunication from outside is encrypted. No encryption in appserver configured.
I'm getting an error, I'm about to see login page in my browser but there's an error, this one:
2014/12/19 11:28:02 [info] 11929#0: *21 client closed connection while waiting for request, client: 127.0.0.1, server: 0.0.0.0:443
this is my nginx.conf related to this proxy reverse
server {
# listen 80;
listen 443 ssl;
#server_name reverse.example.com;
server_name localhost;
# server_tokens off;
ssl_certificate cert.crt;
ssl_certificate_key cert.key;
ssl_session_cache shared:SSL:1m;
ssl_session_timeout 5m;
ssl_ciphers HIGH:!aNULL:!MD5;
ssl_prefer_server_ciphers on;
location / {
proxy_pass http://appserver.example.com:7001/app1/;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_redirect http:// https://;
rewrite ^/app1/(.*)$ /$1 last;
It's not a problem with SSL because when I try with port 80 I see the same error. Any hint will be appreciated.
Thanks!!

Hello,
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: HTTP/1.1 5"
HTTP 1.1 is not natively supported by standard SOAP or Plain HTTP Adapter, you should use SOAP Axis for that. See SAP Note 1039369 - FAQ XI Axis Adapter, under Receiver Adapter General -> 16. Can I use HTTP 1.1? Otherwise, you would have to ask the third-party to use HTTP 1.0 instead.
Hope this helps,
Mark

ZBF: Required to 'pass' icmp errors in the reverse direction ?

Hi,
I've noticed something when having some traffic inspected.
Imagine you have a zone A and a zone B and a policy allowing all connection from A to B:
class-map type inspect match-any cm_all
match protocol icmp
match protocol tcp
match protocol udp
policy-map type inspect pm_all
class cm_all
inspect
zone-pair security zp_A_to_B source zone_A destination zone_B
service-policy type inspect pm_all
Now, it turns out that for everything to work as intended, you also need to all a reverse policy B to A that allows icmp errors to pass through.
ip access-list extended acl_icmp_err
permit icmp any any unreachable
permit icmp any any ttl-exceeded
ipv6 access-list acl_icmp6_err
permit icmp any any unreachable
permit icmp any any hop-limit
permit icmp any any packet-too-big
class-map type inspect match-all cm_icmp_err
match protocol icmp
match access-group name acl_icmp_err
class-map type inspect match-all cm_icmp6_err
match protocol icmp
match access-group name acl_icmp6_err
policy-map type inspect pm_icmp_err
class cm_icmp_err
    pass
class cm_icmp6_err
    pass
zone-pair security zp_A_to_B source zone_A destination zone_B
service-policy type inspect pm_icmp_err
Without this, things like PMTU, traceroute, ... won't work.
I would have expected that icmp errors "related" to a currently inspected sessions would be accepted in the return traffic, but that's apparently not the case.
Can anyone comment on this ?
Cheers,
    Sylvain

WTF ??? The whole thread is gone ???

Error in GR reversal

Similar Messages

Maybe you are looking for