Error in Guided Procedure
Hello All,
I am currently working on the Customer Master Prototype and am concerned with developing Guided Procedure and Dynpro Components for the same.
Since last week I have been facing an issue with Enterprise Portal. Earlier when i would log on to portal and then click on Design Time it would throw a dump "java.lang.NosuchMethodError" com.sap.caf.gp.eu.ui.<Method Name>.
To resolve this error i went through the stack trace and noted down the Active DC's that are causing problems. I then logged on to NWDS and in the Active DC's tab, scrolled down to the corresponding DC's and did a sync archive. After which i deployed the DC's and it stopped throwing the dump.I went on with the development of the GP till the block level. At the block level when i try to group the
parameters, it throws a dump again.I tried the same way to find the Active DC's and re-sync them but this time the approach did not work and it still throws an error when i try to group the parameters.This also causes the SDM to restart or stop randomly,The error that i am getting is.
java.lang.NoSuchMethodError: com.sap.caf.eu.gp.model.pfw.cons.IParamStructure.canCreateGroup(Lcom/sap/caf/eu/gp/model/pfw/cons/IParameter;)Z
Pls suggest any help will be highly appretiated.
Thanks in advance.
Regards.
Vinit Soni
Hello Bemdt,
Thanks for ur reply,I was also impression that some thing is wrong with my SCA's and u r hitting the bull's eye
Bendt Mt NW Release is 7.00 Sp14
i have logged in to System Information page and searched for SAPEU14 as u have suggested,So i found this entry theare.
Vendore sap.com
Name: SAP-EU
Version: 7.00 SP14 (1000.7.00.14.0.20071117060736)
Provider: SAP AG
location: MAIN_APL70VAL_C
Applied: 20080213042227
Kindly suggest me whow to proceed i m stuck in it badly:-(
i appretiate ur help.
Thanks and regards
Vinit Soni
Edited by: Vinit Soni on Nov 14, 2008 7:10 AM
Edited by: Vinit Soni on Nov 14, 2008 7:12 AM
Similar Messages
-
Hi,
While creating action in Guided Procedure i am getting error.
i am using Sneak preview version 9.
the error is
com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object ontoBrowser, relation UsedComponent.
at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:640)
at com.sap.tc.webdynpro.progmodel.repository.IWDComponentUsageInfo$Implementation.getUsedComponentInternal(IWDComponentUsageInfo.java:216)
Can any one help me out..
Regards,
sekhar.c
Message was edited by:
sekhar chebroluHi Sekhar,
Redeploy the SCA SAP-EU (if redeployment does not help undeploy and deploy again) components:
caf/eu/gp/ui/dt/comp/cons,
caf/eu/gp/ui/dt/comp and
caf/eu/gp/ui/actions from software component SAP-EU
Thanks
Som -
TimeStamp Errors on Guided Procedures
Hi, i currently create a GP process where the PDF can call the web service and add to the database.
currently i have a startDate and endDate inside PDF the objectType for it is Date
but then my web service, i try to deploy the methods by casting the startDate and endDate as Date
example of the web services code is like
public boolean createNew(String staffID,
Date startDate,
Date endDate){
but under the Design Time at Guided Procedures when i doing mapping i see the startDate and endDate the objectType is Time Stamp.. and i try to map the both together i just say that "Cannot map Date to Time Stamp"
is there anyway to solve this problemHi,
So you need to set the roles as Default Roles, to it, edit you process and goes to tab "Default Roles", so define the user that will be the Approver.
Best regards -
Error in Guided procedure - Incompatible input parmeters for CallableObject
Hi,
GP has been implemented using Netweaver,I am trying to acess the screen that fetches data from GP,it shows following error
" Error while processing the item; it cannot be displayed "
The webdynpro screen is not visible and I can see "block" and "action" highlighted in red.
I am new to GP.Please help me to reslove this error.
Thanks
Shikha
Edited by: shikha singh on Aug 25, 2010 3:50 PMHi,
What kind of callable object are you using?
Thanks -
Error while executing Guided Procedures Action
Hello,
We are getting the following error when a user is trying to execute an Action in the Guided Procedures Process:
"Cannot complete Action: Activity could not be read".
What can be causing this?
Any help would be highly Appreciated.Hello,
This is more than likely due to an inconsistency of a GP object at database level. I suggest opening an OSS ticket as this would require detailed analysis.
Thanks and best regards,
Carl Connolly
Senior Support Consultant - Netweaver Web Application Server
AGS Primary Support, Global Support Centre Ireland
Guided Procedures trouble shooting guide:
www.sdn.sap.com/irj/scn/wiki?path=/display/JSTSG/%2528GP%2529Home -
Error in launching guided procedure: Error while obtaining JCO connection.
Hello experts,
we've a problem with webdynpro java calling a guided procedure.
We've defined an endpoint for our callable object, as you can see the test of the connection works fine:
In the configuration of our callable object we use the endpoint above:
And we can test the callable object: it works well, call the right BAPI and find the results.
But when the GP is called and this callable object try to call the BAPI in the background it doesn't work at all.
In the log and trace of the portal we find this:
A technical callable object exception ocurred: Le service RecupActeurs n'a pas pu être exécuté : La connexion pour le nom de connexion SAP_R3_HumanResources n'a pas pu être chargée à partir de System Landscape Directory (SLD) : Error while obtaining JCO connection.
com.sap.caf.eu.gp.model.co.tech.TechnicalCallableObjectException: Le service RecupActeurs n'a pas pu être exécuté : La connexion pour le nom de connexion SAP_R3_HumanResources n'a pas pu être chargée à partir de System Landscape Directory (SLD) : Error while obtaining JCO connection.
at com.sap.caf.eu.gp.model.connect.impl.ExternalServiceBackgroundCOContainer.execute(ExternalServiceBackgroundCOContainer.java:101)
at com.sap.caf.eu.gp.model.co.background.impl.BackgroundCOExecutorImpl$CallableObjectExecutor.run(BackgroundCOExecutorImpl.java:126)
at com.sap.caf.eu.gp.model.co.background.impl.BackgroundCOExecutorImpl.execute(BackgroundCOExecutorImpl.java:504)
at com.sap.caf.eu.gp.model.co.background.impl.BackgroundCOExecutorImpl.execute(BackgroundCOExecutorImpl.java:581)
at com.sap.caf.eu.gp.model.pfw.wfc.local.impl.BackGroundActionProcessorHelper.processAction(BackGroundActionProcessorHelper.java:183)
at com.sap.caf.eu.gp.model.pfw.wfc.local.impl.queue.BackgroundCOQueueProcessor.run(BackgroundCOQueueProcessor.java:263)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.caf.eu.gp.base.exception.EngineException: Connection that belongs to connection name SAP_R3_HumanResources could not be loaded from System Landscape Directory (SLD): Error while obtaining JCO connection.
at com.sap.caf.eu.gp.model.connect.rfc.impl.SLDConnectionManager.getClientConnection(SLDConnectionManager.java:138)
at com.sap.caf.eu.gp.model.connect.rfc.impl.ConnectionDeliverRFC.analyseConnectionMode(ConnectionDeliverRFC.java:185)
at com.sap.caf.eu.gp.model.connect.rfc.impl.ConnectionDeliverRFC.deliverConnection(ConnectionDeliverRFC.java:91)
at com.sap.caf.eu.gp.model.connect.rfc.impl.SAPSystemConnector.deliverMetaData(SAPSystemConnector.java:116)
at com.sap.caf.eu.gp.model.connect.pvd.saprfc.impl.SAPRFCServiceProvider.executeExternalService(SAPRFCServiceProvider.java:232)
at com.sap.caf.eu.gp.model.connect.impl.ExternalServiceManager.executeExternalService(ExternalServiceManager.java:139)
at com.sap.caf.eu.gp.model.connect.impl.ExternalServiceBackgroundCOContainer.execute(ExternalServiceBackgroundCOContainer.java:89)
... 9 more
Caused by: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection.
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:152)
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:160)
at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.getJCOClientConnection(WDSystemLandscape.java:41)
at com.sap.caf.eu.gp.model.connect.rfc.impl.SLDConnectionManager.resolveClientConnection(SLDConnectionManager.java:169)
at com.sap.caf.eu.gp.model.connect.rfc.impl.SLDConnectionManager.getClientConnection(SLDConnectionManager.java:102)
... 15 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for 'SAP_R3_HumanResources'
at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:658)
at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:485)
at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:248)
at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:233)
at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.<init>(JCOClientConnection.java:129)
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:150)
... 19 more
Caused by: com.sap.tc.webdynpro.services.sal.um.api.WDUMException: No client user defined for the current request (no regular Web Dynpro request as ITask is null.
at com.sap.tc.webdynpro.serverimpl.core.um.AbstractClientUserFactory.getCurrentUser(AbstractClientUserFactory.java:48)
at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.getCurrentUser(WDClientUser.java:67)
at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:591)
It seems that the GP could not connect to the SLD to call the JCO, but as said before, when we test the callable object, it calls the BAPI without any problem.
We tried to recreat either the JCO and the Endpoint but without success.
Any help will be appreciated.
Thank you.Hi.
Thanks for your answers.
Here are the things :
From the GP administration, the endpoint's test is working.
From the SLD, the JCO is working too.
From the Web Dynpro Content Administrator, the JCO's test is working too.
From the GP Desing Time, the callable object supposed to call the FM uses the right endpoint, and the test is working too, we retreive data from the backend.
From our app, calling the GP process that includes our callable object, we have errors pasted above...
Regards. -
Guided Procedure Administration: Error trying to stop process instance
Hi guys,
I habve a problem with the guided procedures. When I try to cancel a running process instance in the guided procedure administration, I get the error below.
Has someone an idea what the reason could be?
Br
Matthias
java.lang.NullPointerException
at com.sap.caf.eu.gp.ui.admin.instancemng.CInstanceManagement.terminateInstances(CInstanceManagement.java:435)
at com.sap.caf.eu.gp.ui.admin.instancemng.wdp.InternalCInstanceManagement.terminateInstances(InternalCInstanceManagement.java:225)
at com.sap.caf.eu.gp.ui.admin.instancemng.VInstanceTerminate.onActionTerminate(VInstanceTerminate.java:291)
at com.sap.caf.eu.gp.ui.admin.instancemng.wdp.InternalVInstanceTerminate.wdInvokeEventHandler(InternalVInstanceTerminate.java:170)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:131)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:72)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:156)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:91)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:161)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:109)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:96)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:469)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1395)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1215)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:158)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppProcessing.doService(DispatchHandlerForAppProcessing.java:35)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:114)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:81)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:506)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:526)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:457)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:248)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:699)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:231)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:230)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:205)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:93)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:105)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)kglad,
The structure is this one:
home_mc (many layers and timeline)
reel_mc (some layers and just one frame)
flvReel (FLVPlayback)
I've done exactly what you said. It still havin' same problem!
My all output is
TypeError: Error #1010: A term is undefined and has no properties.
at index_paraReell_fla::MainTimeline/frame2()[index_paraReell_fla.MainTimeline::frame2:91]
at flash.display::Sprite/constructChildren()
at flash.display::Sprite()
at flash.display::MovieClip()
at index_paraReell_fla::player_3()
at flash.display::Sprite/constructChildren()
at flash.display::Sprite()
at flash.display::MovieClip()
at index_paraReell_fla::mp3_2()
at flash.display::MovieClip/gotoAndPlay()
at index_paraReell_fla::MainTimeline/loop()[index_paraReell_fla.MainTimeline::frame1:17]
Same here:
[object home_7]
[object super8_69]
undefined
TypeError: Error #1010: A term is undefined and has no properties.
at index_paraReell_fla::MainTimeline/homeBtn()[index_paraReell_fla.MainTimeline::frame2:173]
My line 91 is: menu.btns.stop(); -> This is working very well, any problem. But don't know if this have any relation.
No idea what I can do! -
Error in UWL --Guided Procedure initiated by Webdynpro
Hi All,
I have initiated a guided procedure process from webdynpro for java code. This is creating a item in UWL inbox. When I am clicking on this item it is showing following error:
Could not retrieve process instance: contact your system administrator
Same initated process can be opend from guided procedure runtime.
Please help.
Thanks
Raktimhi ,
the following blog explains how to do the customization of UWL for guided procedures
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/904ca240-63bc-2a10-1c98-de81b6a045bf
have you done all these?
Thanks and Regards
shanto aloor -
Error when testing a Guided Procedure that use a Visual Composer UI
Hello!
Trying to develop my first Guided Procedure in SAP NW CE 7.1 SR3.
I follow instructions that I earlier have used with CE 7.1 SP1 (in TechEd07), assuming no major changes from SP1 to SR3...
I have defined a Callable Object that is based on a Visual Composer UI.
The Visual Composer UI itself works fine when I test it in Visual Composer but when I try to test the Callable Object I get the following error message:
"Could not load execution container: Did not find active instance for component com.sap.caf.eu.gp.ui.co.wd4vc.exec.COExecWD4VC in running application."
When I click on the error message I get a lot of details of the underlying Java exception:
"java.lang.IllegalArgumentException: Cannot find view element with ID 9NEfbfuapOdP8O4KnmM19Q in application com.sap.caf.eu.gp.dt.workset.AppWorkset with namespace null"
(skipped all details...)
Have I missed some step (development or configuration) that is new in CE 7.1 SR3 compared to CE 7.1 SP1?
I have tried to read through the available on-line help but can't find anything that seems to differ...
Are there any examples/tutorials available for CE 7.1 SP3?
Thanks for your help,
Magnus.Hello Dipankar!
Thanks for trying to help me out!
I'm unfortunately having problem with finding the choice "Add Guided Procedure Information" in the options menu in VC.
I have looked in the menu "Tools --> Options" but failed to find this choice.
Is this choice maybe changed in SAP NW CE 7.1 SR3?
Regarding running the VC component as a stand-alone application I can launch the component from VC after deployment and it works fine both as HTML and Flex (I really like the Flex - version :-)!
But if you mean something else with running it stand alone please direct me to some doc-url so I can learn how to do that!
Best Regards,
Magnus. -
Interactive Form with Guided Procedure Error
Hi,
I have a guided procedure with a callable object defined to send an email with an attached interactive form. When I execute the guided procedure I keep getting the following error. I have setup the smtp setting under caf/eu/gp/model according to the Configuring GP for Interactive Forms guide.
The mail communication for client application id:0768334F5EF53307986C90435843D119 is not registered. Please contact Bounced Mails administrator:<>
Also note if I have a guided procedure just to send a email notification without an adobe interactive form it works fine.
We are using adobe 8.0 and netweaver 7.0 sp12.
Any help would be appricated.
#1.5 #760960013002006A00000046000BE05C00044AFDAF9A1C6D#1208353340136#com.sap.caf.eu.gp.model.fnd.mail.MCFMailSenderImpl#sap.com/tcwddispwda#com.sap.caf.eu.gp.model.fnd.mail.MCFMailSenderImpl#samuelpo#74##quail_JSD_72617150##664e0c400bb511dd826f760960013002#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/Server#Plain###The mail communication for client application id:0768334F5EF53307986C90435843D119 is not registered. Please contact Bounced Mails administrator:<>
com.sap.caf.eu.gp.mail.cf.client.registration.ClientNotRegisteredException: The mail communication for client application id:0768334F5EF53307986C90435843D119 is not registered. Please contact Bounced Mails administrator:<>
at com.sap.caf.eu.gp.mail.cf.core.exceptionhandling.MailCFExceptionHandler.throwClientNotRegisteredException(MailCFExceptionHandler.java:327)
at com.sap.caf.eu.gp.mail.cf.core.registration.impl.MailCommunicationTimerTasksRegistry.checkRegistration(MailCommunicationTimerTasksRegistry.java:303)
at com.sap.caf.eu.gp.mail.cf.core.service.impl.MailCFService$4.send(MailCFService.java:201)
at com.sap.caf.eu.gp.model.fnd.mail.MCFMailSenderImpl.sendMail(MCFMailSenderImpl.java:153)
at com.sap.caf.eu.gp.model.iforms.preproc.FormPreprocessor.execute(FormPreprocessor.java:652)
at com.sap.caf.eu.gp.model.co.background.impl.BackgroundCOExecutorImpl$CallableObjectExecutor.run(BackgroundCOExecutorImpl.java:126)
at com.sap.caf.eu.gp.model.co.background.impl.BackgroundCOExecutorImpl.execute(BackgroundCOExecutorImpl.java:368)
at com.sap.caf.eu.gp.ui.dt.comp.cotest.VTest.executeBackgroundCO(VTest.java:711)
at com.sap.caf.eu.gp.ui.dt.comp.cotest.VTest.onActionExecute(VTest.java:373)
at com.sap.caf.eu.gp.ui.dt.comp.cotest.wdp.InternalVTest.wdInvokeEventHandler(InternalVTest.java:259)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.Exception
... 39 moreHi,
I also have a similar issue where i have to validate whether the user submitting the offline form is an user who has authorisation ( a table storing user credentails) .
Were you able to solve this issue of security in offline form.
Appreciate if you can throw some light.
Regards
Jayesh -
Error in defaulttrace log from Guided Procedures
After implementing Guided Procedures for test purposes, it was decided that it was not needed. The configuration was removed. However every few minutes an error message is produced.
#1.# 00144F482363002300000712000005BE00045789876BB369#1222148100961 #com.sap.workflow#sap.com/irj#com.
sap.workflow#Guest#0##n/a## 896cb70087fa11dda66900144f482363 #ThreadThreadPool.Worker10,5,SAPEngine_A
pplication_Threadimpl:3_Group##0#0#Error#1#/Applications/Workflow/Engine#Plain###WFMS.processEven
t#
#1.# 00144F482363002300000713000005BE00045789876BBC03#1222148100963 #com.sap.workflow#sap.com/irj#com.
sap.workflow.#Guest#0##n/a## 896cb70087fa11dda66900144f482363 #Thread"["ThreadPool.Worker10,5,SAPEngine_
Application_Threadimpl:3_Group##0#0#Error##Plain###com.sap.workflow.eventsender.WFEventException:
USER_AUTH_FAILED: User account for logonid "user_id" not found!
at com.sap.workflow.engine.WorkflowRuntime.continueExecution(WorkflowRuntime.java:220)
at com.sap.workflow.engine.WFMS.processEventEx(WFMS.java:827)
at com.sap.workflow.engine.WFMS.processEvent(WFMS.java:703)
at com.sap.workflow.engine.WFMS.processEvent(WFMS.java:692)
at com.sap.workflow.engine.BPRuntime.continueExecution(BPRuntime.java:22)
at com.sap.workflow.engine.BPMS.processBPEvent(BPMS.java:98)
at com.sap.workflow.engine.ejb.EWorkflowDirectBean.processEvent(EWorkflowDirectBean.java:39)
at com.sap.workflow.engine.ejb._EWorkflowDirectBean__EJBProxy.processEvent(_EWorkflowDirectB
ean__EJBProxy.java:212)
at com.sap.workflow.eventsender.WFDirectEventSender.sendWFEvent(WFDirectEventSender.java:24)
at com.sap.workflow.es.scheduler.TaskSchedulerDeadline.run(TaskSchedulerDeadline.java:91)
at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:174)
at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:108)
at java.lang.Thread.run(Thread.java:534)
All information (we think has been removed from the portal), we have also looked in the SAP backend and cannot see in the logs were this error is coming from.
Does anyone know where this error is coming from and how it can be stopped?
ThanksHi there,
we have the same Problem... but here we have a named user, that can´t authenticate...
but we don´t know, where we can find these setting...
com.sap.workflow.eventsender.WFEventException: USER_AUTH_FAILED: User account for logonid "F.Schrader" not found!
at com.sap.workflow.engine.WorkflowRuntime.continueExecution(WorkflowRuntime.java:220)
at com.sap.workflow.engine.WFMS.processEventEx(WFMS.java:827)
at com.sap.workflow.engine.WFMS.processEvent(WFMS.java:703)
at com.sap.workflow.engine.WFMS.processEvent(WFMS.java:692)
at com.sap.workflow.engine.BPRuntime.continueExecution(BPRuntime.java:22)
at com.sap.workflow.engine.BPMS.processBPEvent(BPMS.java:98)
at com.sap.workflow.engine.ejb.EWorkflowDirectBean.processEvent(EWorkflowDirectBean.java:39)
at com.sap.workflow.engine.ejb._EWorkflowDirectBean__EJBProxy.processEvent(_EWorkflowDirectBean__EJBProxy.java:212)
at com.sap.workflow.eventsender.WFDirectEventSender.sendWFEvent(WFDirectEventSender.java:24)
at com.sap.workflow.es.scheduler.TaskSchedulerDeadline.run(TaskSchedulerDeadline.java:91)
at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:174)
at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:108)
at java.lang.Thread.run(Thread.java:770) -
Creation of Vendor in MDM using Guided Procedure ...SDA not found
Hi All,
We are trying to create Master data Using Guided Procedure.
After deploying MDM components on Portal we are able to see the standard iViews provided by SAP on Portal.
We are using the following PDF to create the scenario.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/763845b3-0b01-0010-a1a6-c1763df8f049
According the PDF we have to deploy following two sda on the portal server to see the GP callable Object.
H2G_GuidedProcedures.sda
H2G_SourceCode.zip
But we are not able to find Follwoing sda on even Service Market Place.
If anyone knows from wher to download these two SDA, Let us also Know.
Thanks in Advance for Help.
Regards
Shruti.Shruti,
While clicking on link that is given in PDF for these files its saying:
Error - download expired
Sorry, the file you want to download, is already deleted or the id is incorrect.
Perhaps we require a special ID of basis guys because it might be possible we dont have access to these files.
Just check with your ITICS team.
BR,
Alok -
I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16000
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>16000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
<EventRecordID>58</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<ErrorMessage>%%2147944126</ErrorMessage>
<ErrorCode>0x800706BE</ErrorCode>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16010
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
<EventID>16010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
<EventRecordID>59</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
<ErrorCode>15005</ErrorCode>
<DataItemName>Parameter0</DataItemName>
<EventPayload>
</EventPayload>
</ProcessingErrorData>
</Event>Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help meFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
How to use WebDynpro Applications in Guided Procedure?
Hello,
i want to use a WebDynpro application as a part of a guided procedure. Therefor i developed a simple WebDynpro application as described in the NetWeaver Developer Studio Help. The Application consists of only two views. The first view is to enter data, the second displays them. So far so good....
In the next step i wanted to integrate this application as a CallableObject for execution in my guided procedures process. The wizard asks in step 2 for the "Development component" and WebDynpro Application. But where do it get this information? Indifferently what path i enter, it only returns an error the the object is not available on the server.
EDIT: The path to the webdynpro application is something like this: http://host:port/webdynpro/dispatcher/local/WebDynproUITest/UITest
kind regards,
MatthiasHello Dipankar,
thx for the blog! This really helped a lot!
The problem is, that you cant test the WebDynpro as a stand-alone application. What would be the best way to develop a WebDynpro Application for GP?
Is there a way to start with a 'normal' WebDynpro Application and convert this when finished in a "guided procedure ready WebDynpro for CE Application"?
I think i will contact you next week with more questions, for now on its weekend
regards,
Matthias
Maybe you are looking for
-
ICal - Able to create, but not view calendars
I've done a clean install of snow leopard server. I've set up wikis and blogs and they work just fine. When trying to go to myserver/ical in a browser however, then the iCal page loads and is overlaid with an error message saying "You don't have perm
-
OIM Migration from version 9.1.0 to 9.1.0.2
Hello Everybody, I'm working in a migration process of Oracle Identity Manager from 9.1.0 to 9.1.0.1 and them to 9.1.0.2. The process works Ok with the core of OIM but we having a problem with the migration of the AD connector. At the first time, we
-
Missing lower 25% of the screen ONLY in Apple DVD player
Hi everybody, I just made a showreel DVD (1 menu, 1 video track) in DVD SP 3.02. It plays back correctly on all dvd players (stand alone, PC) except Apple DVD Player: it strechtes the menu and the video vertically so it's missing the lower 25% of the
-
Fustrated of not able to get the update download.
Ok, this is getting ridulous, I have been trying to download the maverick for the past hour and it is not getting anyway. Is this going to be like this, not user friendly,
-
I know this is not strictly a discussion group for Cameras and Formats so I apolgise in advance for posting, but my options for advice are drying up and I figure that subscribers of the Final Cut Pro group will perhaps be able to assist. We're a musi