Error in help description for TriangleWave

There is an error in the Help description for the TriangleWave function.
It says this:
It should say this:

Thanks for pointing this out, I'll see what I can do to get this documentation updated. They have it correctly in other programs, but you were spot on with it being incorrect in CVI.
Rob S
Applications Engineer
National Instruments

Similar Messages

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

Error saving help text !

What's the maxsize of a Item Helptext.
Recieving following error when trying to add helptext larger than approx 2000 characters:
Error saving help text for item "2863318983774284".
Thanks Gunnar
Message was edited by:
ganderss

just testing RSS freshness ;)
sorry

Help - Class name and descriptions for a function location.

Hi Guys
i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
please help.
many thanks.
seelan.

sadiepu1 wrote:
When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
Did you use facebook to log in?
Verizon will not be able to help you retrieve any of the information you need. You will have to contact Zynga.

How to create a help view for a customized error message

Hi all,
Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
Thanks very much!
Bruce, Wen

Hi Bruce,
Could you brief your concerns again.
Why don't you maintain long text in message class for long description.
Regards,
Ranjith N

Description for list of errors in log file

Hi,
Is there anybody out there that would have a description for the list of errors we can get in crawl log file.
For example I would like more info and how to fix these errors...
WKG-30199
WKG-30201
WKG-30005
WKG-30007
WKG-30008
WKG-30009
WKG-30013
WKG-30018
WKG-30027
WKG-30041
WKG-30083
WKG-30126
If anybody can help me find a description of these errors that would be great. How to fix them event better.
thanks

I am not sure about all the errors but lets build up slowly.
Following are Authentication related errors:
WKG-30007: Authorization required.
WKG-30199: Authentication
WKG-30201: Missing authentication credentials
WKG-30025, WKG-30164 are both related to connection between the crawler and the target. Errors appear when ssl connection could not be establised or the ssl certificates have expired.
I am afraid there is not much documentation where the problem and solutions could be dug out.
HTH
Aravind
WKG-30146: Cookie Tracing: 'display cookie obtained from target server'
WKG-30145: Cookie Tracing: New cookie domain ".XYZ.com" created
WKG-30147: Cookie Tracing: ' Sending the cookie back to the target server in responce'
WKG-30027: Not allowed URL: 'This occurs when the link(domain) in page being crawled/indexed is not in the inclusion policy
WKG-30083: http://xyz.com/xyx : Duplicate document ignored 'This occures when the url in question has already been indexed, HINT: signature hash value of each url is stored in the wk$url table'
WKG-30008: URL in question NOT FOUND.
Message was edited by:
[email protected]

Clas Hortien,Please Help me for MSSQL2005 ERROR.

hi,Clas Hortien,
i can start mssql2005, i find a souluton from ms support web site ,but i donot know how to do it, the notes as follows
http://support.microsoft.com/kb/929665/zh-cs
You cannot start the SQL Server service after you install Active Directory on a Windows Server 2003-based member server or you run the DCPromo command on a Windows Server 2003-based domain controller
View products that this article applies to.
Article ID : 929665
Last Review : October 15, 2007
Revision : 1.1
SYMPTOMS
When a member server or a domain controller is running Microsoft Windows Server 2003 and has Windows Internal Database installed, you cannot start the Microsoft SQL Server service after you do one of the following: Install Active Directory on the member server.
Run the DCPromo command on the domain controller.
Additionally, the following error message is logged in Event Viewer:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: Date
Time: Time
User: N/A
Computer: ComputerName
Description:
The Windows Internal Database (MICROSOFT##SSEE) service terminated with service-specific error 3417 (0xD59).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Back to the top
CAUSE
This issue occurs because the required discretionary access control list (DACL) for some files has been deleted. The DACL is deleted when you install Active Directory on the member server or when you run the DCPromo command on the domain controller.
Back to the top
WORKAROUND
To work around this issue, repair Windows Internal Database. To do this, run the following command line at a command prompt:
Msiexec <MSI_File_Name> CALLERID=OCSetup.exe REINSTALL=ALL REINSTALLMODE=omus /qn REBOOT=ReallySupress /l*v <Log_File_Path>
Back to the top
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Back to the top
MORE INFORMATION
A message that resembles the following is logged in the SQL Server Errorlog file:2006-01-18 15:45:38.25 Server      Microsoft SQL Server 2005 - 9.00.2025.00 (Intel X86)
     Jan 16 2006 01:24:00
     Copyright (c) 1988-2005 Microsoft Corporation
     Embedded Edition (Windows) on Windows NT 5.2 (Build 3790: Service Pack 1)
2006-01-18 15:45:38.25 Server      (c) 2005 Microsoft Corporation.
2006-01-18 15:45:38.25 Server      All rights reserved.
2006-01-18 15:45:38.25 Server      Server process ID is 1216.
2006-01-18 15:45:38.25 Server      Logging SQL Server messages in file 'D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\LOG\ERRORLOG'.
2006-01-18 15:45:38.25 Server      This instance of SQL Server last reported using a process ID of 3152 at 1/18/2006 3:30:11 PM (local) 1/18/2006 11:30:11 PM (UTC). This is an informational message only; no user action is required.
2006-01-18 15:45:38.25 Server      Registry startup parameters:
2006-01-18 15:45:38.26 Server            -d D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\DATA\master.mdf
2006-01-18 15:45:38.26 Server            -e D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\LOG\ERRORLOG
2006-01-18 15:45:38.26 Server            -l D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\DATA\mastlog.ldf
2006-01-18 15:45:38.27 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2006-01-18 15:45:38.27 Server      Detected 1 CPUs. This is an informational message; no user action is required.
2006-01-18 15:45:38.34 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2006-01-18 15:45:38.39 Server      Database mirroring has been enabled on this instance of SQL Server.
2006-01-18 15:45:38.43 spid5s      Starting up database 'master'.
2006-01-18 15:45:38.43 spid5s      Error: 17207, Severity: 16, State: 1.
2006-01-18 15:45:38.43 spid5s      FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\DATA\master.mdf'. Diagnose and correct the operating system error, and retry the operation.
2006-01-18 15:45:38.43 spid5s      Error: 17204, Severity: 16, State: 1.
2006-01-18 15:45:38.43 spid5s      FCB::Open failed: Could not open file D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\DATA\master.mdf for file number 1. OS error: 5(Access is denied.).
2006-01-18 15:45:38.43 spid5s      Error: 5120, Severity: 16, State: 101.
2006-01-18 15:45:38.43 spid5s      Unable to open the physical file "D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\DATA\master.mdf". Operating system error 5: "5(Access is denied.)".
2006-01-18 15:45:38.44 spid5s      Error: 17207, Severity: 16, State: 1.
2006-01-18 15:45:38.44 spid5s      FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\DATA\mastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2006-01-18 15:45:38.44 spid5s      Error: 17204, Severity: 16, State: 1.
2006-01-18 15:45:38.44 spid5s      FCB::Open failed: Could not open file D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\DATA\mastlog.ldf for file number 2. OS error: 5(Access is denied.).
2006-01-18 15:45:38.44 spid5s      Error: 5120, Severity: 16, State: 101.
2006-01-18 15:45:38.44 spid5s      Unable to open the physical file "D:\WINDOWS\SYSMSI\SSEE\MSSQL.2005\MSSQL\DATA\mastlog.ldf". Operating system error 5: "5(Access is denied.)".
transport is disabled or not configured.
i donot know how the use the command line
Msiexec <MSI_File_Name> CALLERID=OCSetup.exe REINSTALL=ALL REINSTALLMODE=omus /qn REBOOT=ReallySupress /l*v <Log_File_Path>
and what is <MSI_File_Name>
and what is <Log_File_Path>
can you write a example to me ?
thanks !
i Waiting for you reply!

Hi,
the MSI file is the MSI file to install the SQL Server Embedded Edition. Normally it is called during the installation of the package you have installed (WSUS or other). If possible you should extract the package you have installed and look for a sql*.msi file. I'm only familiar with WSUS in this case. Here it is a sqlrun03.msi file together with a sqlrun.cab and a sqlservr.exe file. With this MSI file you can install the SQL Server. In your case (AD) you have to look for exact SQL MSI file within you package.
Another way would be to set the ACL of the given path (with the master.* files) so that the startup account of the Microsoft##SSEE service has appropriate rights on it.
Regards
Clas

Need descriptions for data quality error codes

I'm getting the following address error codes and I don't have the corresponding messages: F440, F441, F505. I have the descriptions for all the other codes.
Thanks,
Nathan

Nathan,
Can you tell me which data quality product you are using? If this is for International Address Correction & Encoding you can find all error codes in the Quick Reference for Views and Job-File
Products. A copy should be installed with your software. Otherwise you may locate a copy at http://help.sap.com/ > Business Objects > Data Quality > Quick Reference for Views and Job-File
Products
F440 - Insufficient input data; cannot choose between multiple street-level matches.
F441 - Insufficient input data; street level match occurred using partial-range matching.
F505 - Matched to undeliverable default record. The generated undeliverable (F505) has no ZIP+4 listed, an invalid CART, and is flagged as undeliverable.(United States)
Regards,
Bob Minard
Engineer, Technical Customer Assurance

Concurrent Manager cannot find error description for CONC-System Node

Hi friends,
I m facing a problem while doing clustering for oracle EBS.i m using hpux11i with veritas cluster server for oracle DataBase cluster.i am doing 2 node cluster.i have installed oracle 11i apps with 9i DB.thru veritas i am able to do a db cluster failover.now i want to run oracle apps 11i too from both nodes(active/passive).so i configured a virtual IP address with a Virtual Hostname which will move along with the cluster failover.when i configure ora apps tier thru giving it virtual hostname concurrent manager dies with error--Concurrent Manager cannot find error description for CONC-System Node. i tried many things but unable to come up with a solution. pls help.
regs
Satish

Please post the contents of your hosts file here.
Is FND_NODES table populated correctly? Please run AutoConfig and make sure it completes successfully.
Why are the Concurrent Managers Failing with 'CONC-System Node Name not Registered" Error After Applying Patch 6461517? [ID 1108452.1]
OPP and SFM Managers do not Start [ID 1425409.1]
Thanks,
Hussein

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

Hp pavilion dv6 6180 help me for this error when I am using my recovery disk

hp pavilion dv6 6180 help me for this error when I am using my recovery disk
The destination drive is not connected

Hello Mohammadshamlou. I understand that you're having some issues using your Recovery Disc. It is giving you the error that the drive is not connected. Is this correct? How long have you had the notebook?
What issue originally led you to want to try a recovery?
The error seems to imply that it is not detecting the hard drive as this would be the most logical destination drive. So, I feel the best thing to try first is verify that the hard drive is in proper working order. Follow these steps and please post the result.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Ios 5.1 OTA update gives error message ( unable to check for update - an error occured while checking for a sofware update ), can anyone help ?

i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
the same thing happens in my ipad too.

Thank you! I've been trying all day to get this to work! and finally i found the answer!
amensistech wrote:
I found a fix for this.
Go to Wifi Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
Set the DNS to 8.8.8.8 and then go back to the software update page.
This time it shall work.
I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
Do rate me and reply if it works.

HT4623 hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphon

hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

HT201263 my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into rcovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please

my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???

By the way, i am using Windows 7 x64 and updated itunes

Error in help description for TriangleWave

Similar Messages

Maybe you are looking for