Error in Hierarchy activation

Hello Experts
I re loaded hierachy for 0material, infopackage failed with error "Error arose when activating the hierarchy; Hierarchy not active
I tried activating using FM RRHI_HIERARCHY_ACTIVATE got error "There is no modified version for this hierarchy"
I am able to see M and A versions of hierachy in hierarchy maintenance.
but when i mannually try to activate hierarchy i get short dump with message
Short text
    Message type " " is unknown.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Please help.
Regards
Sudeep

Hi sudep,
did u done the attribute change run for hierarchy after loading the hierarchy?.....
try the below steps
1) Load Hierarchy
2) Save Hierarchy
3) Attribute CHange Run on the InfoObject.
Run these in the same sequence and see if it solves the problem.
Make sure that you have this Checkbox on:
1) In Infopackage, in tab Hierarchy Selection, there is a small checkbox for 'Flag for Activation'. Make sure its ON.
2) In Save Hierarchy Process Type, the same check box should be ON.
Harikrishna N

Similar Messages

Hierarchy Activation Failure

Hi All,
I have included a hierarchy activation step in a process chain immediately after loading a hierarchy. However, the hierarchy activation is failing with the following error message:
**Hierarchy that was loaded with request l_rnr cannot be activated
Can anyone advise what's wrong? Thanks.
Regards,
KM

Hi Koon,
Check table /BI0/HEVENTGROUP there has to be a record for 022540.
Selection of HIEID you get with TA RSH1 -> right click on requested hierarchy -> details -> internal hierarchy id
or by displaying the hierarchy -> header data.
Are there many values for this hierarchy with 5 or 6 digits?? If so, maybe you can ad missing digits while uploading from source system. If its only one you can repair the hierarchy manually by creating the correct node in RSD1 and change node 022540 with node 00022540 in the hierarchy.
Klaus

Error occurs while activating a 'Write Optimized' DSO.

I am getting error " There is no PSA for infosource 'XXXX' and source system 'XXX' while activating a newly defined DSO object.
I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSO

Hi,
For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
From SAP help
You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Thanks
Srikanth

How do i sign in onto facetime if it keeps on sayin 'an error occured during activation'.?

How do i sign in onto facetime if it keeps on sayin 'an error occured during activation'.?

iOS: Troubleshooting FaceTime
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Using FaceTime
FaceTime, Game Center, Messages: Troubleshooting sign in issues

The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
Raj

Hi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

Error message while activating MPOS

Dear All,
We are implementing SCM 2007 and are facing a peculiar problem, please help me to resolve the issue;
We have copied all the necessary standard objec from BI content and also created some of the Zinfoobjects. We have created MPOS with Z objects and other MPOS as well with 9AMATNR and 9ALOCNO.System allows us to save the MPOS but when we activate it gives an error message.
Please help me in resolving the issue.
Best Regards
Javed

Hi
Thanks for your reply .
I have already done as you have mentioned.
There is a problem of log generation too. system does not show the message text
when I try to activate the MPOS , ignoring the same systems populate another message as below; please see below;
Error occured during activation (see log).
Best regards
Javed

Error message while activating ODS ZFI_ORD( FI Order Details)

hi ,
I am getting this error message while activating the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
" . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
Thanks,
Pooja

Hi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear

Error message when activation a packaging specification in ICH 5.0

Dear all,
I created a packaging spec within ICH 5.0. The check function does not return a error. But when trying to activate the PS I am getting the error message:
Package specification not activated; no condition records found.
What kind of condition records does the system mean?
Regards
Martin

Hi Martin,
You can have a look in the pack spec group and make sure that the flag 'PS_ACTIVATE' it is not set.
That way you will no longer face this error during the activation process.
I hope this will help you.

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can't add .ACSM files to ADE, message: "Error! Check activation"

I am using Adobe Digital Editions 4.0.3 with a NOOK Simple Touch, running on a 64-bit 2009 Windows 7 machine. Recently I have been unable to download my library ebooks to my Nook. The electronic library I am using (a derivative of Overdrive, I think) only allows the download of books in the .acsm format. However, recently, I am unable to open the books in ADE. Instead, the only option I have is Adobe Reader. When I select the 'Browse' option and choose ADE and hit 'OK', nothing happens and it doesn't show up as an option. When I try and manually add a file to my ADE library, I get an error message saying 'Error! Check Activation". The only thing I even got halfway working was when I downloaded ADE 1.7.2. I got the .acsm files into the library (still, I had to add them all manually through the ADE interface). However, my NOOK will not open these files, even when using ADE 1.7.2. These are the things I have tried:
-Downloading an e-book (in .acsm format) from the Digital Editions free book selections. Same issue
-downloading and redownloading Adobe Digital Editions 4.0.3 (and removing the other program)
-Downloading and redownloading Adobe Digital Editions 1.7.2 (and removing the other program)
-Deauthorizing ADE (Every time it just says "Unable to erase authorization. Please try again after some time.")
-Adding a book in ADE 1.7.2, getting ADE 4.0.3, transferring the book to the newer software, deleting 1.7.2, and syncing my nook with 4.0.3. Nook says it's not authorized
-Doing a factory reset of my NOOK
-Unblocking the .acsm files by going to Properties>General
-TRYING (and failing) to automatically associate .acsm files with Adobe Digital Editions. Like trying to open a downloaded file with ADE, I get no response when I browse and select i
(SIDE NOTE: my Adobe IDs all match. I know that is also not the issue).
I think the issue here is that something is preventing .acsm files from opening in ADE, and nothing in particular is wrong with my NOOK. My only guess (which is probably misguided) is that Windows can't process my request for ADE to be the program to open .acsm files because it's in the x86 program files folder and not the default Program files folder. I've never heard of that being a problem but I can't think of another reason.
If anyone has any ideas, please give them to me. I am actually typing all this for my grandmother, and she is going crazy without her library books.

On the deactivation issue- I just had a similar issue where I could not deactivate and had to manually deactivate by deleting the activation information from Windows registry. That might help you as well.
Follow the instructions below the disclaimer on this page: Error "E_AUTH_NOT_READY" | Digital Editions
Or if you are more computer savvy, simply close Adobe Digital Editions and then delete this registry key:
HKEY_CURRENT_USER\Software\Adobe\Adept

Error occurred during activation iMessage and FaceTime.

Cant log in to iMessage or FaceTime, displays error occurred during activation! Date and time set correctly. Any ideas?

Using FaceTime
http://support.apple.com/kb/ht4319
Trouble-shooting FaceTime
http://support.apple.com/kb/TS3367

"Error! Check Activation" Regular solutions not working- details in post

I am on a new laptop running Windows 8.1 and am setting up ADE on it. I get "Error! Check Activation." whenever I try and open an overdrive public library book. The computer is authorized and running a licensed set of CS5 Creative Suite software as well which has no issues. When I try to deauthorize and reauthorize, I get the error, "Unable to Erase Authorization. Please after some time." It has said this for three days. I have tried uninstalling and reinstalled ADE4.0. I have tried using ADE 3.0. Still didn't work, uninstalled, and reinstalled 4.0. Google suggested going into the registry and deleting the Adept>Authorization, however it will not allow deletion and I do not know if further tinkering it will affect my creative suite software. I have deauthorized my previous laptop, and reauthorized it, but now get bad ID errors when trying to download new books, and cannot return old ones on that machine now, which means I can't use that as a workaround in the meantime. Earlier I did install the overdrive console for Windows 8 by mistake, rather than the windows desktop version, and proceeded to download a few of the books using that. It has since been uninstalled, but might this have caused the issues?
Any ideas as to what may solve my problem?

On the deactivation issue- I just had a similar issue where I could not deactivate and had to manually deactivate by deleting the activation information from Windows registry. That might help you as well.
Follow the instructions below the disclaimer on this page: Error "E_AUTH_NOT_READY" | Digital Editions
Or if you are more computer savvy, simply close Adobe Digital Editions and then delete this registry key:
HKEY_CURRENT_USER\Software\Adobe\Adept

Hierarchy Activation dumps when itu0092s executed from Process Chain. u0096 BI 7.0

Issue:
CostElement Hierarchy sign reversal is updated manually using ABAP Program to update sign reversal, which updates H and J tables and activates the Hierarchy using func module RSHIER_HIER_CHECK_AND_ACTIVATE. It works fine when ABAP is executed manually as well as when Process Chain is executed in BW 3.5.
However, the same Process Chain in BI 7.0 it abends during Hierarchy Activation.
From the Dump, find below call sequence of programs for more details:
No.   Ty.          Program                             Include                             Line
      Name
6) METHOD       CL_RSSH_SHOW_LOG==============CP    CL_RSSH_SHOW_LOG==============CM008    53
CL_RSSH_SHOW_LOG=>CREATE_CONTAINER
5) METHOD       CL_RSSH_SHOW_LOG==============CP
CL_RSSH_SHOW_LOG==============CM007    52
CL_RSSH_SHOW_LOG=>SHOW_MESSAGES_WRITE_LOG
4) FUNCTION     SAPLRSHIER                          LRSHIERU03                            121
      RSHIER_HIER_CHECK_AND_ACTIVATE
3) FORM         ZBWUXXX1                            ZBXXXXX1                              382
005-ACTIVATE-HIER                                                     2) FORM         ZBWUXXX1                            ZBWUXXX1                              278
It abends during Container creation to send out a message.
Any help to resolve this issue would be highly appreciated.
Thanks, Vijay

Vijay,
Due to the age of this post I am assuming did you find a fix to the problem?
I actually would like more information about your abap program as we are trying to create a similar program.

TS3367 When I try to activate y FaceTime, I get "An error occurred during activation. Try again." I have a good password, I'm on wifi, I've tried toggling off and back on again... why can't I get FaceTime to work?

When I try to activate my FaceTime, I get an error msg that says, "An error occurred during activation. Try again." I have a good password (I used it to get here...); I'm on WiFi; I've toggled FT off and back on again but I cannot get past the error message and get activated. What's wrong? Thanks. Talking about my iPhone (4).

Its possible that the server can be down now. Have you ever used it before? If you want, try resseting the phone by just holding the sleep/wake key and the home button together for 10 seconds. Then wait 5 seconds when it turns off and press the sleep/wake button to turn it back on. Then try it again. Let me know what the results are.

Error in Hierarchy activation

Similar Messages

Maybe you are looking for