Error in IDES while cratimg PO - Logical system not defined

Hi,
While creating PO in IDES , system is giving  following error ,
"Logical system is not defined"
Pl suggest the solution,
Thanks a ton in advance,
NB

Hi
in BD54 Check have u defined logical system for client 800
for more details post ur prob. in SAP NetWeaver forum
Vishal...

Similar Messages

  • Logical system not defined in table SMOF_ERPSH!

    Hello,
    In the inbound queue of CRM, the queues are in 'SYSFAIL' status. The error message is ' logical system not defined in table SMOF_ERPSH!' .
    the table has an entry for relevant ERP system.
    I dont know where else to check.
    I have checked the logical destinations on CRM and it is defined correctly.
    can anyone help me here.
    Regards,
    Pratima

    Hi Pratima,
    I am also facing the same issue. I checked all the entries and Entries are there in the respective tables but still the same issue.
    But if I delete the queue, the changes are replicated for that time but after some time again the queues are getting blocked with the same issue.
    Pratima, can you please tell you whether your issue got fixed on this.
    Thanks,
    Sharath.

  • Event trace error: own logical system not defined ?

    Hello,
    i am trying to start a workflow when the status of a document changes to "completed". I was checking the event trace with transaction code : "SWEL" and i found out that the workflow is trying to start but there is some kind of error and the event trace is saying :
    Your own logical system has not been defined for this client. Most of the ALE functions therefore cannot be used. No links can be written.
    Any suggestiobns on what can be the problem   ?
    points are awarded
    Regards

    Sounds like you need to setup your client as a logical system, to do so..
    To do setup the Logical System follow the following steps
    In IMG Settings
    Cross Applications -> Distribution (ALE) -> Basic Cofiguration.
    Set up ‘Logical System -> Maintain Logical System.
    Create New Entries

  • Logical system not defined.

    Hello
    Can some body help me to identify the issue which gives me an error,No Logical system for FI is manitained .
    This error, I receive at the time of approving shopping carts.
    Thanks.
    Jayawant Gokhale

    Hi,
      Pls refer the foll threads:
    PO transfer from SRM to vendor system
    PDP issue - ext reqts missing in SRM system
    External system to SRM
    Re: Upload PO from XML file in SRM
    BR,
    Disha.
    Pls reward points for useful answers.

  • Logical Path not defined..?

    Hi,
    I recently got CRM 5.0 installed on my system. Very first step of 'Maintain Business Partner' it says, 'Logical Path not defined'.
    Tried to open activities, says' Logical system not defined'
    Please suggest what is the problem & how to rectify this.
    A prompt reply wil be highly appreciated.
    Thanks
    Anil

    Hi  ,
         You need to Define Logical System for your System to Allow you to Execute Actions
    Path:SAP Web Application Server>Business Intelligence>Links to Other Source Systems>General Connection Settings::
    In this step, you can define the logical systems in your distributed system.
    Caution:Logical systems are defined cross-client.
    Activities
    1. To create a logical system, choose Edit -> New Entries.
    2. Enter a name for the logical system that you want to create.
    3. Enter a description of the logical system.
    Enter the Logical System that you are using,
    These Links may Further Help up for Details:
    http://help.sap.com/saphelp_crm50/helpdata/en/b4/b0b13bb3acef3ce10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_crm50/helpdata/en/55/38e74110cf0b7fe10000000a155106/frameset.htm
    Hope it Answered your Queries..
    Thanks and Regards,
    RK.
    Added Links for Further Help: RK on Mar 5, 2009 12:07 PM

  • Error in ODI while configuring ERPi  Source system

    Hi All,
    Hyperion Version : Hyperion 11.1.2.1
    OS: windows 2008
    I'm getting the following Error in ODI while configuring ERPi Source system in workspace.
    "942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist
    java.sql.SQLException: ORA-00942: table or view does not exist "
    can anyone guide how can achieve this. thanks in advance.
    Regards,
    Ravi

    Hi All,
    Please find the below error log from ERPi configurator [Workspace] and let me know further steps to solve this issue....
    ERPI Process Start, Process ID: 71
    ERPI Logging Level: DEBUG (5)
    ERPI Log File: C:\Windows\TEMP\2\/aif_71.log
    Jython Version: 2.1
    Java Platform: java1.4.2_08
    COMM Create Process Detail - Create Process Detail - START
    COMM Create Process Detail - Create Process Detail - END
    Error in Start PS HCM Setup Source System
    java.lang.Exception: The scenario did not end properly.
    at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
    at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
    at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
    at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
    at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
    at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
    at com.sunopsis.dwg.cmd.e.i(e.java)
    at com.sunopsis.dwg.cmd.h.y(h.java)
    at com.sunopsis.dwg.cmd.e.run(e.java)
    at java.lang.Thread.run(Unknown Source)
    ERPI Process End, Process ID: 71
    Thanks
    Ravi

  • Error-logical system not created in client 001

    Hi Experts,
    When I was trying to delete the application from Administration Client its giving me the error "Logical system not found on client 001"
    I created the Logical system in 001 but still same problem...
    Did I do anything wrong during the installtion??
    Can anyone please help me
    Bobby

    Hi Experts,
    I get the same error "Logical system not created in client 001"when I try to delete the appset from backend using program UJS_ACTIVATE_CONTENT...
    Please suggest..
    Thanks
    Bobby
    Edited by: bobbydon on Jul 7, 2010 7:46 PM

  • Error message  - Message no. 26168, Document type '' not defined .

    Hi,
    I am setting up QA system after successful building of Dev System .
    While chnaging newly created folder in QA system gives error message  - Message no. 26168, Document type '' not defined .
    Document Type exists and are used to create folders successfully.
    Why I am getting this error?
    Kind Regards
    Harish

    Hi,
    Am Not able to implement this Note .
    Am facing the same issue .Please let me know the solution ASAP.
    Our SAP Version ECC6 EHP6
    Regards,
    Veeramani

  • Error message - attributes of the user inconsistent or not defined

    Hi,
    We are in SRM 7.0 have created new plant and some users assigned to this plant.
    However when logged into portal page, it gives the error message ' Attributes of the user inconsistent or not defined' see PPOMA_BBP.
    When checked in the org structure the data entered are correct.
    What could be the reason for this error message.
    Rgds,
    Madhan

    Hi,
    Please check the following in the org structure in PPOMA_BBP for the users
    1. Check whether the attribute for the ITS --URL is given.
    2.Check the attribute for the company code is given.
    3.Check whether the Roles for the users is given
    in addition go to the check  tab and check if any Red mark are there.
    correct those attribute.
    The error is basically related to  the PPOMA_BBP only
    Regards
    G.Ganesh Kumar

  • ERROR B191 - IDoc has its own logical system as receiver

    I everybody, i'm tryng to execute a package to charge a ODS from another ODS (Datamart) but the process ends with the error "IDoc has its own logical system as receiver", can you help me with is?
    What should be the reason for this error? What can i make to solve it?
    Thanks to all

    Hi  Reddy,
    please let me know how did u solve this issue, even i have the same requirement and am gettign status 29.
    Thanks
    Rakesh

  • Error KC041 costing of sales order Logical system

    Dear all,
    I am having a problem when costing a specific sales order. Can anyone tell me what this means and how we can solve this. I am a newb so please try to be clear. The following error appears:
    "Planning overhead credits not allowed for BPR PD-BDT"
    Message number: KC041
    Diagnosis
    You are not in the logical system where the transaction data for BPR PD-BDT is managed.
    System response
    Activity planning overhead credits is not allowed.
    Procedure
    Activity planning overhead credits can only be carried out in logical system LSP02200_S

    Hi there
    I think that the 'logical system' is where the system allows customization of the various objects in which client etc.  It is where you are using for e.g. ALE with HR on another instance of SAP on another box.  It is assigned somewhere in the Controlling area settings.  I can't remember exactly where it is.  Ask your BASIS team to assist.
    Hope this helps
    Kind regards
    Dawn

  • JCO connection error:Couldn't create JCOClientConnection for logical System

    Hi All,
    We are facing a production outage issue.
      We have a Federated Portal Network setup where one of our producer goes down automatically (seems on heavy load).
      On this Producer server we have 3 Web Dynpro applications deployed and default trace is full with JCO connection error   saying Could   not create JCOClientConnection for logical System: CSVMR_WD_MODELDATA_DEST.
    We had issue with max allowed JCO connections so we changed the below mentioned parameters for JCO connection settings in portal:
    u2022     Minimum value of JCo Pool Size in total = 80
    u2022     Minimum value for CPIC_MAX_CONV per SAP Web AS = 320
    u2022     Maximum Number JCo Connections = 160
    Please let us know if we are missing on some settings, any help in this regard is appreciated.
    Regards,
    Priyanka

    Hi,
    As you have already increased the maximum number of connections/pool size but still you are facing this problem. I would suggest you to check the web dynpro application which might not be able to release/disconnect the JCO connection.
    Please check this [Thread|How to close a model object connection for Adaptive RFC?; for more details.
    Regards
    Puneet

  • Logical system not seen in ID  (7.0)

    Dear XI experts,
    i defined in SLD a logical system as application system (SAP BACKEND)to send and receive IDOCS.
    I am trying to assign a Business system in the ID which I defined in the SLD and cant seem to find this in the ID.
    What must have I missed while defining the Business system or Technical sysetm?
    Perhaps some step information could help for PI 7.0.
    Thanks

    hi,
    have a look at my blog:
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    Regards,
    Michal Krawczyk
    http://mypigenie.com XI/PI FAQ

  • Logical system not updated in the business system adapter specific data par

    Hello Guys,
    I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
    I did a cache refresh using :
    1) sxi_cache --- Full cache refresh, delta cache refresh
    2) Hard cache refresh
    3) In ID "Cleared SLD data cahe "
    4) Refreshed the exchange profile
    But no use
    Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.

    When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
    there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
    Run the cache in the ID are there any errors there?
    check the RWB cache monitoring is everything green there?

  • Logical System not appearing in SLD

    Hello Friends,
    Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
    I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
    The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
    [The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
    Request your kind adivse on what can be done. Where can I lookout for possible errors.
    Thanks & Regards,
    Anand Patil

    Hi
    On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
    If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
    Check the Same SLD Roles with some PI Service  User.
    Regards
    Prabhat Sharma.

Maybe you are looking for

  • How many times can I use Migration Assistant?

    Hello All, I am planning on buying an Intel i7 iMac in the near future, and I want to take some of the files from my old Core Duo computer and move them to the i7 iMac. I'm not throwing out the Core Duo iMac, I just want some of the files on the new

  • No commitment item entered/derived

    Hi to all, My name is Samad Farooq , currently we are using the SAP version 4.6C. We have Funds Management active in our system.Everything was working fine but recently this error is coming. We had assigned all the profit&loss G/L account of expensse

  • Can't connect to our wifi with my laptop, but pc and iphone can!

    All devices (my boyfriends pc and my iphone and ipad) can log into our new wifi network except for my macbook pro. I can connect to any other wifi like the starbucks or our neighbors network, and all different hotel networks. I've never had a problem

  • Images repository in portal

    Hi, I am planning to configure  Portal welcome screen,Theme and pages with some custom (Client) logos etc. Similar to SE80 in BW, MIME repository Is there any central location I can first save/upload all the images I required in portal and then use t

  • Is there a way to make invoke-command interactive?

    Hello, I have a script that runs an invoke-command with multiple arguments and performs operation on a remote workstation. I want to add some additional confirmations and dialogue choices depending on how the script block executes on the remove PC. I