Error in IDOC-inbound processing

HI All,
while Posting a IDOC in Batch , i am getting an
errot Status - 51. The Error Message is Field LFA1-SPERQ . is not an input field.But While Processing in
WE19 i am able to Load it.
Regards,
Hazam

Hi,
Go thru this links
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400365
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Check whether you are using exact FM.
Thanks
Sunil

Similar Messages

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

IDoc to Soap, with BPM - Permanent error in BPE inbound processing

Hi Experts,
IDoc to Soap, with BPM - > Permanent error in BPE inbound processing
How to rectify this any issue???
Thanks-
sk

Hi,
The inbound processing encountered a permanent error and the queue therefore stopped.
The error message "Permanent error in BPE inbound processing" may be caused by the following:
- At the start or when you process a process instance, the inbound processing encounters an exception that was not handled. This exception is triggered, for example, by a transformation step, a synchronous send step or a control step but it was not caught in an exception handler branch. If the exception that was not handled occurs in the first transaction of the started process instance, the system does not write the process instance to the database but it sets the queue that has this error message to the error status.
Refer to the help in Note 1082099
- The inbound processing triggers this error if the correlation evaluation shows that a message should be delivered to a process instance that has the status "error". Since delivery to process instances that contain errors is not permitted, the queue is stopped.
Use the simulation of the message delivery in the detail view of the relevant queue LUW to determine the relevant process instance for the affected message and use transaction SXMB_MONI_BPE "Continue Process Following Error" (or transaction SWF_XI_SWPR) to continue. If you cannot continue the process instance, check whether you can logically delete the instance. In this case, use the method that is described in Note 807906 to logically delete a process instance.
Check whether your system contains other process instances that have errors in order to detect similar problems. Use transaction SXMB_MONI_BPE "Continue Process Following Error" or transaction SWF_XI_SWPR.
Use the report RSWF_CRL_MAINTAIN to check all of the correlation instances in question or the relevant process instances that you can reach using "Display Work Item".
- Messages that cannot be delivered because no correlation instance can be found may lead to the error that is mentioned here. Check whether the causes that are outlined in Note 1094028 affect your case.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful.

LSMW idoc Inbound Processing settings

Hi,
We have done LSMW with BAPI method to create Bank master.
In Idoc Inbound Processing settings -
We created partner type as 'B' i.e, for BANK
While creating Partner Number it is not allowing to create Partner Number. The error is "Enter a permissible partner number"
Please let me know what would be the problem.
Regards,
Hari
Edited by: Bhatlapenumarthy Hari Krishna on Sep 12, 2008 9:31 AM

Hi,
Use patner type as US only and LSMW as Patner number.
this will surely solve your problem .
plz do this way :
The first requirement is a file port for the file transfer. If required, create a port of the file type via Maintain ports. To do this, position the cursor on "File" and press Create. You should be in change mode. SAP recommends:
Port: LSMW
Name: Legacy System Migration Workbench
Version: 3 (IDoc record types SAP Release 4.x)
Outbound file Please enter a (dummy) physical directory and a file name, i.e. u2018filelsmwu2019 ·
As an addition, you can specify a tRFC port. This port is required, if you do not want to create a file during data conversion but submit the data in packages directly to function module IDoc_Inbound_Asynchronous.
SAP recommends:
Port: assigned by the system
Version: 3 (IDoc record types SAP Release 4.x)
RFC destination: Name of R/3 System
Name of port: Legacy System Migration Workbench.
Then the partner type should be defined or selected. SAP recommends:
Partner type: "US" (User)
As of release 4.5A, this partner type is available in the standard system. Up to release 4.0B inclusive, this partner type is not available in the standard program and should be added. SAP recommends:
Partner type: Create US
Report name: /SAPDMC/SAP_LSMW_PARTNERTYPES
Form routine: READ_USER
Short description: any.
Finally a partner number should be defined or selected. SAP recommends:
Partner number: LSMW
Partner type: US
Partner status: A (active)
Type: US
Language: DE or EN
Person in charge: Your user ID.
Activate IDoc inbound processing
reference : help.sap
thanx.
Edited by: Dhanashri Pawar on Sep 12, 2008 7:10 AM

IDoc Inbound Processing for CREMDM & DEBMDM

Hi experts,
I'd like to gather some feedback from you regarding the topic ERP IDoc Inbound Processing for CREMDM & DEBMDM. As you all know, there's currently no option to directly process CREMDM/DEBMDM IDocs in ERP. Currently you have to use PI for splitting the CREMDM/DEBMDM message into its related ADRMAS and CREMAS/DEBMAS IDocs.
My areas of interest are:
1) How satisfied are you with the current situation? Does the split work? Are there issues or problems in the current message handling? What are the Pro's and Con's from your point of view?
2) What would be the requirements for a CREMDM/DEBMDM handler? What would you expect? Maybe you have implemented something similar on project basis and could post some feedback?
One painpoint I'd see with a CREMDM/DEBMDM inbound is that you'll lose the IDoc Monitoring capabilities. The message split allows a single record tracing in the IDoc Monitor (as there is a 1:1 relation between IDocs and records). This changes for the mass processing. The monitor would display only the status of the IDoc and you'd need some other monitoring capabilities to check the results on record level. What are your thoughts about that? Is the monitoring important? Would the application log be a feasible solution for that challenge?
Additional comments are welcome, of course.
Best regards
Michael
PS: @ Matt, please contact me by mail. thanks.

Hello ,
Here are some other pain areas regarding the message split :
1. Complicated monitoring proess & reprocessing error idocs : We have to monitor ADRMAS & CREMAS or ADRMAS & DEBMAS during inbound processing. Also we could not find any best practices to reprocess error idocs. E.g. If ADRMAS fails & CREMAS succeeds what is the impact . Also the impact if it is reveresed. We know for sure that if CREMAS fails , vendor will not be created / updated. But we could not find specific pointers for ADRMAS failures.
2. It is a tedious process to link CREMAS with corresponding ADRMAS idoc specially when SAP maintains internal number range for vendors.
3 . The process is complicated if you are managing customer or vendor contact information with contact address . We could succesfully implement the integration but it took us a while to reach end-point.
4. Splitting really does not seem to support if ERP maintains internal number range.
5. Another major issue we observed is , if ADRMAS is under process & corresponding DEBMAS or CREMAS is posted , it fails raising the message that Account is locked. Default serialization does work in ERP system . But overlap of few microseconds also cause this error.
Hope this helps !!
Please let me know if you need any other specific details since we have used MDM - ECC integration using PI to its maximum extent .
Regards
Yogesh

BPM Error Permanent Error in BPE inbound processing

Hi
I require some urgent help on this BPM issue.
We are trying to integrate SRM PO being directly sent to Vendors using HTTP. We are getting an error saying Permanent Error in BPE inbound processing. The scenario works like this.
SRM system would sent PO using the SRM Standard interface PurchaseOrderRequest_Out. We need to transform the message into cXML format and send it to the vendors using HTTP adapter. Using the HTTP response we need to trigger an email to the business process team.
The SRM interface is under the software component SAP SRM Server 5.5 and our mapping is being done in a common software component and for the vendor interface we have another software component. We have created a relationship in the SLD by making the common SWC as dependent software component to SAP SRM Server and Vendor Software Component. So in the integration repository we are able to get the interfaces for the SAP SRM Server and Vendor Software Component under the common software component. The receive step for this BPM is a copy of the standard SRM interface PurchaseOrderRequest_Out(as the standard interface is an asynchronous interface) and we would require an abstract interface for the BPM. We have checked the semantics for the BPM and its fine. The related ID development is in place. When the message is being triggered, it gives us this above mentioned error. When we go to the QRFC monitor we are able to check the details.
Regards,
Indranil

Hi Indranil,
     You don't see you BPM....
First go to SXI_CACHE and check that your BPM is listed there and that the compilation has been completed succesfully.
Is this the first time the BPM is being used? If so check if has been configured. For example, go to RWB->Component Monitoring->BPE in <SYSID>
and check if any error is listed there.
In order to check what is going on in your BPM you can trace it:
                  SXMB_MONI_BPE->Diagnosis Processes with Errors
                  SXMB_MONI->Process, get your msg and click on 'PE'. You should see the workitems and see if there is any error.
         Hope this helps you....
         Regards,
            Encinas.

Permenant error in bpm inbound processing error in inbound queue of pi7.1

Hi Experts,
In E filling scenario in SAPPI7.1, iam facing a problem. i.e In sxmb_moni message monitoring, the message was schedule at outbound side.when i extend that, the message was stuck in smq2 with "permenant error in bpm inbound processing".can any one please tell me how to relove this issue.
Thanks & Regards,
Giri.

Hello
Check the note #1126656 BPE-TS: Permanent errors in the BPE inbound processing. This describes some possible causes and solutions for this error.
Regards
Mark

Permanent error in BPE inbound processing

Hi all,
We have recently migrated are XI scenarios to a new server.
In one of the file to rfc scenario whenver a file is processed i get the error in smq2: Permanent error in BPE inbound processing.
The chances of BPM and mapping error are less as the BPM is working live in another server.
What could be the other problems.
REgards
Edited by: Vinithra Iyangar on Feb 26, 2009 10:36 AM

Dear Vinithra,
Its highly improbable for this error to occur because of transports going wrong. There is one more case which i am sure is the cause why you are getting this error.
"This behavior is when we place the files in the respective folders both the files are picked up by the file adapter. Process instance is generated for BPM. First receive step is encountered and the file is received by it. But due to the wait step the second receive step is not open and hence the second file cannot be delivered to it. Unlike the first case, in this case as the buffering is deactivated the file is not buffered and hence the inbound processing of BPM fails for the second receive step."
Please check if something like this is happening.
Refer : /people/milan.thaker/blog/2008/07/04/delivery-modes-in-bpm
Rgds
joel

Permanent error in BPE inbound processing for BPM Mesg Split

Hi Friends,
i have done the below scenario. i had done everything what theys mentioned in the blog but i am getting the error in smq2 as "Permanent error in BPE inbound processing" sysfail please helpme on this issue.
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure

Hi Uday,
Please check this blog for your error, This is really interesting. Permanent solution for your question.
Delivery Modes in BPM.
Thanks!

BPM workflow "In Process"-Queue "Permanent error in BPE inbound processing"

Hi All,
I am trying to collect messages from 2 different interfaces into BPM( Integration Process).
when I checked in sxmb_moni , i found the error on outbound status & BPM workflow has stuck with status "In Process".
it is not showing any error in Workflow, how to solve the issue.
due to the above error, other messages are stuck in Queue stating "Permanent error in BPE inbound processing".
Please help.
-Jyoti

Hi Jyoti,
Goto T.Code swwl, in that clear all fields and choose from date as 1 month ago and try to execute. Then, delete all entries there. And re-execute your scenario.
In this case, please see SAP Note 1126656.
Please see the below blog, it might be helpful to you.
/people/henrike.kaiser/blog/2009/02/03/how-to-analyze-stopped-queues-in-xi-ccbpm
Regards,
Rajesh

BPM: Permanent error in BPE inbound processing

Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Kiran.

My undertsanding is no work is being generated at all .
If you are getting the error for Source ---> BPM flow then there is a possibility that the ID objects (RD, Interface determination) are to be blamed.
1) Recreate these particular ID objects/ make some dummy changes
2) Activate and ensure that Cache is refreshed
3) Delete the entry in the queue (or delete the queue)....do this only if the XI system is not of Quality, production
4) some times the BPM cannot be triggered from sending a test message from RWB .... so make a testing from the source application .... this particular case has heppened to me and hence suggesting to you.
Regards,
Abhishek.

Permanent error in BPE inbound processing error

Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Seshagiri.

Hi Praveen,
If the BPM goes in error due to "The incoming payload structure is incorrect (not matching message type structure of abstract interface)" , is there any work around?
Currently in my scenario BPM goes into error due to incorrect structure , error show up in SMQ2 . And the subsequent message also get stuck. What I have to do is to delete the queue in error and reactivate the queue manually.
Is there any way we can avoid this situation.
Thanks,
Pankaj

ALE IDOC Inbound processing using IDOC_INPUT_ORDERS

Hi experts,
I am stuck up with IDOC inbound processing.
Can you please let me know about the process in Receiving Purchase Order from the customer system and creating Sales Order in the SAP system? using FM IDOC_INPUT_ORDERS. I have an Idea about WE20, NACE etc.
Can you please explain me about the process on how to go about it?
Kind regards,
Shiva.

Hi,
I have moved this thread from [ABAP, General Forum |ABAP Development; to [Data Transfers Forum|ABAP Connectivity;.
The forum Data Transfer is the place to discuss LSMW, ALE, BDC, Data Transfer Techniques, Batch Data Communication, Legacy System Migration Workbench, Application Link Enabling, IDOCs, BAPIs.
Please, the next time check the most appropriated forum category before posting. Thus you have more chance to have your question answered !
Best Regards.
Marcelo Ramos

Activate IDoc Inbound Processing in LSMW

Hi Gurus,
Why do we need to activate the IDoc Inbound Processing in LSMW if we are going to use BAPI or IDoc in LSMW?
Thanks and Regards,

Hello Paulo
Recently I implemented an ALE scenario where the sending and receiving logical system are the same.
Purchase orders are sent to SAP-XI which returns the IDoc to the same logical system als sales order IDoc.
Thus, our logical system has the ORDERS message type as outbound and inbound parameter. SAP-XI is the other receiving and sending logical system.
The easies way is the "Copy&Paste" approach. Look into your system for existing inbound IDocs and compare their control record with the one of your test IDoc.
Regards
Uwe

What is IDOC Inbound process and Outbound Process?

What is IDOC Inbound process and Outbound Process?
can any one explain about the inbound and outbound process step by step?
Tks in advance,
Phanikumar

Hi,
Inbound means transfer legacy data to SAP system and
outbound means transfer SAP system data to legacy system.
Regards,
Prashant

Error in IDOC-inbound processing

Similar Messages

Maybe you are looking for