Error in idoc of basic type artmas05 - status 51 with Message no. MG537

Hi all,
     I tried to upload the material master table through idoc creation of basic type artmas05. But when i'm trying to do that i'm getting status 51 with Message no. MG537. then I analysed the application log which displays the following
*The field MARA-MEINS/BAPIE1MARART-BASE_UOM(_ISO) is defined as a required
field; it does not contain an entry
*The field MARA-TAKLV/BAPIE1MARART-TAX_CLASS is defined as a required field; it does not contain an entry        
*The field MARA-TRAGR/BAPIE1MARART-TRANS_GRP is defined as a required field; it does not contain an entry
*You have not fully maintained the tax classifications
*The field MAW1-WLADG/BAPIE1MAW1RT-LOADINGGRP is defined as a required field; it does not contain an entry
But i hv given values for all the above fields in their respective segments.So can any1 suggest me how to proceed further.
It would be helpful if someone could tel me the required fields in idoc to upload material master table through idoc.
Thanks in advance,
Revathi.

Hi,
Anybody please tell me the reason for the following error, despite giving all the field values mentioned there. The same error occurs even if I run the BAPI (which the ARTMAS iDoc uses) directly by passing values.
The field MARA-MEINS/BAPIE1MARART-BASE_UOM(_ISO) is defined as a required field; it does not contain an entry
The field MARA-TAKLV/BAPIE1MARART-TAX_CLASS is defined as a required field; it does not contain an entry
The field MARA-TRAGR/BAPIE1MARART-TRANS_GRP is defined as a required field; it does not contain an entry
The field MAW1-WLADG/BAPIE1MAW1RT-LOADINGGRP is defined as a required field; it does not contain an entry
Regards,
Gowri.S

Similar Messages

  • IDOC approach (Basic type : CREMAS01) to upload legacy vendors

    I am using the IDOC approach (Basic type : CREMAS01) to upload legacy vendors.The LSMW then creates default partner functions.
    However i need to modify the partner function.
    My question is ...Is there a way to delete an entry through LSMW using IDOC approach (or even modify would help) but not append????
    Thanks in advance ,
    naval kishore  bhatt.

    Hi,
    Anybody please tell me the reason for the following error, despite giving all the field values mentioned there. The same error occurs even if I run the BAPI (which the ARTMAS iDoc uses) directly by passing values.
    The field MARA-MEINS/BAPIE1MARART-BASE_UOM(_ISO) is defined as a required field; it does not contain an entry
    The field MARA-TAKLV/BAPIE1MARART-TAX_CLASS is defined as a required field; it does not contain an entry
    The field MARA-TRAGR/BAPIE1MARART-TRANS_GRP is defined as a required field; it does not contain an entry
    The field MAW1-WLADG/BAPIE1MAW1RT-LOADINGGRP is defined as a required field; it does not contain an entry
    Regards,
    Gowri.S

  • Idoc of basic type INVOIC01 freight charge feild

    Could any one tell me how to  Identify a field on the Idoc of basic type INVOIC01 to populate the freight charges in SAP.
    Need to find whether field is available or not. This is for inbound idoc. Pls give the inputs
    Thanks in advance

    Hi,
    You can see the IDOC documentation alongwith fields using transaction WE63.
    I dont think, the field you are intereseted in is in INVOIC01.
    I have checked. You also check once.
    Regards
    Abhii

  • Newfs error: "Unable to find Media type. Proceeding with system determined"

    Hi,
    I have the Solaris 10 update 6 installed on one server:
    bash-3.00# more /etc/release
    Solaris 10 10/08 s10x_u6wos_07b X86
    Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 27 October 2008
    bash-3.00#
    I have noticed that if I run command newfs, I get the following error: "Unable to find Media type. Proceeding with system determined parameters."
    bash-3.00# newfs /dev/md/rdsk/d100
    /dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
    newfs: /dev/md/rdsk/d100 last mounted as /export
    newfs: construct a new file system /dev/md/rdsk/d100: (y/n)? y
    /dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
    /dev/md/dsk/d100 is mounted, can't mkfs
    bash-3.00#
    What does this error mean? It did not occurr in earlier versions of Solaris. Can it be ignored or maybe the syntax for newfs has changed and I am doing something incorrectly?
    Thanks,
    Przemek

    [natural weight loss diet|http://www.goarticles.com/cgi-bin/showa.cgi?C=1633072]
    [confessions of a lazy super affiliate|http://www.squidoo.com/lazysuperaffiliate-reviewdetails]
    [how to stop panic attacks|http://simple-fix.blogspot.com/2009/04/how-to-stop-panic-attacks-permanently.html]
    [Acer AS4530-6823|http://www.goarticles.com/cgi-bin/showa.cgi?C=1638379]
    Anwar [http://healthy-weight-loss-plan.info/about/index.html]

  • Keep getting this: Sorry, an error occurred while trying to publish. {"status":500,"message":"Error: [object Object]"}

    My daughter is the first time user of Thimble. She is using your amazing tools to create a webpage but she can't save her work at all. Everytime she press SAVE, a message: Sorry, an error occurred while trying to publish. {"status":500,"message":"Error: [object Object]"} . Any suggestion to solving this problem will be greatly appreciated

    Reload the webpage while bypassing the cache
    *Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
    *Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    Clear the cache and the cookies from sites that cause problems.
    '''Clear the Cache''': Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    '''Remove Cookies''' from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"

  • IDOC and Basic Type

    Hi Experts,
    I have a basic type that I will use in my IDOC with no process codes(attached FM) that will create a document (e.g. orders, deliveries)... and I have found out a BAPI that I can use in creating the document.. the question is.. do I still need to  CALL FUNCTION 'IDOC_WRITE_AND_START_INBOUND' after calling the BAPI to create the document?
    Thanks!
    Nosaj

    Hi,
    Thanks. To clarify.. first I will receive an IDOC coming from XI this IDOC containes the planned orderse that I will create in SAP.
    Question: Can one IDOC contains a lot of planned orders to be created? Meaning that I have created a copy of segment E1PLAFL because this segment can only acquire a maximum of 1 data record... so i copy it and customize it to acquire more than 1 data records.....?
    Then the Basic Type:  LOIPLO01 does not have a functionaly of creating planned orders.. so I will use a BAPI in creating the planned orders....
    Question: Since I will be using a BAPI to create the IDOC.. do I still need to call the function module ive said (WRITEIDOC)?

  • IDoc : Linking Basic type and function module

    Hi,
    I am in the process of customizing for inbound processing.
    I have one doubt reqarding below customizing :
    t-code WE57:
    FM                               Message type          Basic type
    ZBAPI_IDOC                ACC_DOCUMENT   ACC_DOCUMENT01
    ZBAPI_IDOC                ACC_DOCUMENT   ACC_DOCUMENT02
    t-code WE42:
    Process code     FM                                   Message type         
    ZBAPI                ZBAPI_IDOC                    ACC_DOCUMENT  
    So in this scenario, which Basic type would be considered? or if I want the Idoc with basic type ACC_DOCUMENT02, then how should be the customizing?
    Thanks ,
    Yogita

    Hi Yogita,
    The basic type depends on the version of system in consideration.
    lets say for eg. HRMD_ABA has basic type from HRMD_ABA01 to 05 and they are depend on the version of the system as which to use.
    Regards,
    Atish

  • Error Cancelling Release of Basic Type

    Hi,
    Im using WE30 to make changes to a BASIC type. So in the menu EDIT->Cancel Release an error prompted these messages:
    The release of the basis types cannot be reset
    Message no. EA506
    Diagnosis
    The release can only be reset if the basis type has been released in the current Release. Basis type ZPADET01 has already been released in Release 46C, so this release can no longer be removed.
    Procedure
    Create a successor to basis type ZPADET01 so this new basis type can be further developed.
    I usually modify BASIC type with WE30 successfully. But this error message I'm at a lost.
    Please Help,
    Sid

    i wouldn't go about and delete it. just create a new one, let's say YPADET01. when you clicked the button 'create' there comes a pop-up where you can decide how to proceed. it is there where you can decide whether you want the new one to be a successor of ZPADET01.
    actually, i have been doing some reading on the subject and found about that release-thing:
    http://help.sap.com/saphelp_erp2004/helpdata/DE/dc/6b832543d711d1893e0000e8323c4f/frameset.htm
    start there and dig a bit around, so you can get a better clue on how to go on.
    sorry, that was the german link, here you go in english:
    http://help.sap.com/saphelp_erp2004/helpdata/EN/dc/6b832543d711d1893e0000e8323c4f/frameset.htm
    Edited by: Mylene Euridice Dorias on Aug 11, 2009 8:13 AM

  • Error :- No authorization for basic types (activity 01)

    Hi Experts,
    While trying something at the BW server i suddenly got the below error
    I am getting the error when i am accessing the T-CODE RSA1.
    Error :- You have no authorization for basic types (activity 01)
    I checked the ids of my colleagues all are getting the same messages...
    Regards,
    RG

    Hi,
    1. Check in SU53 tcode
    2. You are having RSECADMIN/PFCG tcode access?? If yes you can give authorisation for the same.
    3. You dont have S_RS_ADMWB  - authorisation
    4. for your user id give this above authorisation
    5. If you are unable to do the same, ask your basis team to give you the authorisation
    refer this link- 1.http://help.sap.com/saphelp_nw70ehp1/helpdata/en/f3/291542e4b4df2ce10000000a1550b0/frameset.htm
    2.http://help.sap.com/saphelp_nw70ehp1/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
    Edited by: Asish Sahu on Apr 28, 2009 10:34 AM

  • Error :- No authorization for basic types

    Hi Experts,
    While trying something at the BW server i suddenly got the below error
    I am getting the error when i am accessing the T-CODE RSA1.
    Error :- You have no authorization for basic types (activity 01)
    I checked the ids of my colleagues all are getting the same messages...
    Regards,
    RG

    Hi,
    analyze the missing authorization with transaction SU53 immediately when the error appeared.
    Ask your system/authorization administrator to grant you the missing authorization.
    Regards
    Rainer

  • Error in IDOC creation of Inbound Delivery (VL31N) with  Error Message Number VL561

    H,
      I'm getting an error message when generating a test IDOC of Message type DESADV and IDOC type DELVRY03 to create Inbound delivery with reference to a standard purchase order.
    Essential transfer parameters are missing in record: PO Number and Item
    Could you one help me out in solving this.
    Thanks,
    Raj

    Hi ,
    Goto SM13 .
    Find the terminations based on user and creation date.
    Get the same analysed by ur ABAP team.
    Also check the confirmations in PO at Item level.
    Regards
    Ramesh Ch

  • What is Basic type in IDoc?

    Hi all,
    What is Basic type in IDoc? Please explain me in layman terms. How to see the details of basic type ALEREQ01? Please point me to related files or threads.
    Thanks,
    Charles.

    Hi,
    <b>IDOC Basic type means, IDOC type delivered by SAP</b>. When you want to modify the IDOC provided by SAP, you create an Extension IDOC of Basic type.
    <b>This is what SAP says about "Basic Type".</b>
    IDoc type supplied by SAP (standard format for data communication). Basic types can be modified by customers to create a new, upward-compatible IDoc type. Basic types can also be defined by customers and modified at a later date. Basic types and subsequent modifications created by customers are not necessarily upward-compatible.
    <b>To check detail of any IDOC, user transaction <u>WE60</u>.</b>
    Check area Menu <b>WEDI</b>. Its a Area menu for all IDOC related transaction. Enter command WEDI ( where you enter transaction code - Top left of screen ). Also, this command only works from very first screen of SAP. This is SAP eacy access screen you see when you logon into SAP. Since WEDI is area menu, you can only execute from very first screen.
    Here is the list of other area menu.
    WEDI - IDOC and EDI Basis
    BALE - ALE Administration
    Let me know if you need any other information.
    Regards,
    RS

  • Basic type CREMAS03 does not exist

    Hi all.
    We have SRM 7 Classic Scenario with ECC 6.4
    My problem is in scenario MM-SUS. When we try to replicate a vendor data from MM to SUS the idoc MM is processed correctly, but in (SUS) has an error in trx WE05: Basic type CREMAS03 does not exist.
    I review the settings and I can not find the cause.
    any idea about that?
    Regards

    Hi,
    I am not clear with your issue. Why are you checking for idoc status in SUS system?
    IDOC is sent from the ERP system and check what the status of IDOC is in ERP. Next check whats the xml status in PI system and if its successful in PI then check xml in SUS system/. You can check xml status using tcode: sxi_monitor.
    Regards
    Sam

  • Unable to extend the basic type "SALESORDER_CREATEFROMDAT202"

    HI
    when iam trying to extend the IDOC basic type "SALESORDER_CREATEFROMDAT202" iam getting an error message "Action is not possiable for generated IDOC types"
    To my understanding SALESORDER_CREATEFROMDAT202 is a bapi.So, I guess we can not extend these type of IDOC directly.
    Can any one can help me how to copy the BAPI interface and extend it....
    or any other solution for this......
    can any one can help me reg this.....

    I will answer my question!
    This is the proble of version we are useing!
    the extenction is possiable in sap 4.6 version.
    but it is not possiable in ecc6.
    So follow the steps i have done
    created a new basic type "ZSALESORDER_CREATEFROMDAT202"
    where icopy the basic type "SALESORDER_CREATEFROMDAT202" to it
    Then i extened the IDOC "ZSALESORDER_CREATEFROMDAT202"
    and added the new segments.
    FInally while assiging the basic type to extended IDOC  given basic type as "SALESORDER_CREATEFROMDAT202"
    And assigned to the message type "SALESORDER_CREATEFROMDAT2"  to it
    then we can use this Structure with
    Message type: SALESORDER_CREATEFROMDAT2
    Basic type: SALESORDER_CREATEFROMDAT202
    Extended:SALESORDER_CREATEFROMDAT202EX
    for data picking u can code in the followin function modules:
    Function Module for Outbound ALE
       ALE_SALESORDER_CREATEFROMDAT2
    Function Module for Inbound ALE
       IDOC_INPUT_SALESORDER_CREATEFR
    There is another method also for this:
    create a bapi fm with all the requirements and go to swo1 tc create an object with method as BAPI FM created.then go to TC bdbg and create a bapi ale interface.this  will automatically generates the inbound and outbound FM's .Then the idoc will be generated with the added segments...

  • Tcode IDX2: Basic type 'MATMAS02' is unknown

    Hi!
    How to get the basis type such as MATMAS02, MATMAS05 as known basis type in tcode IDX2?
    When I try to load metadata in tcode IDX2 I get the following error:
    Basic type 'MATMAS02' is unknown
    Message no. EA224
    Thank you very much!
    Holger

    hi,
    check the PORT is defined correctly in IDX1 in XI system.
    Check SM58 in R/3 system..
    check this blog as well page 9-10
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
    Have you imported the IDOC into IR ?
    Sachin

Maybe you are looking for