Error in Idoc scenario

Hi All,
I configured ID properly , but iam getting following error in sxmb_moni.

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks,
Hem.

Hi Hem chand
Check the target BS is correct or not or the inbound interface.
Did you configured the proper receiver technical system..
OR
Check the Receiver Determination is configured correctly. i.e R/3
Verify all the configurations like SM59, Partner Profile/Logical systems. etc. Also check in SM58 of R/3 system.Make sure that All the objects are activated in the Directory.Refresh the cache.Verify is the business system is pointing to correct R/3 system . Go to Business system/Service->Menu->Adapter specific identifiers in the directory
You can test your configuration with sample
payload.
In ID goto to TOOLS -
> Test Configuration for testing.
Hope in this way you can still find at which point the interface goes wrong.
***********Reward points if usefulll***********

Similar Messages

Error while executing a JDBC to Idoc scenario : No standard agreement found

Hello SAP PI Gurus,
I am having a JDBC to idoc Scenario .And the interface is running at 10 min of duration.
<SAP:AdditionalText>No standard agreement found for ,
BS_EXT_CTBSREPDB, , BS_ERPQAS_QE1_320, http://XYZ.com/FI/FI_FI_01/Charges, FIDCC2</SAP:AdditionalText>.
While i test the configuration...i get an error in reciever agreement as mentioned above.
Can you pls help me in resolving this issue.
Regards,
Ravi

Hi,
I think the problem is with namespace....for IDOC the namespace will be "urn:sap-com:document:sap:idoc:messages"...but in your case it is different.....i.e http:....etc.....please check whether you 've used the same IDOC withe above mentioned namespace in all the configuration objects like interface determination, receiveragreement etc.....
Thanks
Priyanka

Error in IDOC-XI-IDOC scenario

Hi folks,
Let me explain the issue. This is an IDOC-XI-IDOC scenario. No BPMs involved. SAX parsing used to parse the IDOCs.
We had around 35000 IDOCs coming in from Brazil system, and they are all stuck in SMQ2 (Inbound queue) in XI. The first message of every queue is in SYSFAIL status, with the status text as Problems found during the EXPORT to specified keyin table.
When I try to execute the queue manually, nothing happens, but an error comes at the bottom of the screen, saying Function module does not exist or EXCEPTION raised.
I checked the dump on ST22, and it shows 130 runtime errors yesterday. The name of the runtime error is EXPORT_TABLE_UPDATE_CONFLICT.
In the what happened? part of the dump, it says Error in ABAP application program. The current ABAP program CL_XMS_PERSIST=============CP had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program.
Even SXMB_MONI is not opening (for yesterdays date). When I try to open it, it hangs for a long time, and finally opens an ABAP Runtime Errors page with the runtime error titled as SNAP_NO_NEW_ENTRY and the error short text as Runtime error: Unable to write short dump
Please advise.Thanks a ton!
cheers,
Prashanth

Hello Prashanth,
First of all this is an XI issue and belongs in that forum.
The export problem is typical to situations where your XI DB is out of space/out of table space. Please check with your Basis team.
Function module does not exist or EXCEPTION raised- This message is a standard ABAP RFC message. For an RFC function call to succeed, you need the same RFC function to exist on both systems. However this is probably not the case- it is more likely that you're out of DB space as I already wrote.
Good Luck (don't forget to award points)
Ofer

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error in File to IDOC Scenario

Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
Vikas

Hello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna

Error in File-PI-Idoc scenario

Dear All,
While working on File-PI-Idoc scenario, I am getting the error as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">UNAUTHORIZED</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have checked various other posts on the same error but still I am not able to resolve this.
Please help me in resolving this error.
reg,
nj

Nishu,
Please check whether you have assigned the following roles to the particular user you are using for data communication.
Roles:
SAP_XI_IS_SERV_USER,
SAP_XI_APPL_SERV_USER
Regards,
Sugata

SM58 Error For IDOC to IDOC Scenario

Folks,
I am getting an error in SM58 from Sender system ( IDOC-XI-IDOC Scenario ) IDoc adapter inbound channel: Error Error when reading. The Issue is XI is not receiving any IDOCS. Does anybody know what is the problem
Thanks
Manish

Hi Renjith,
I'm facing the same problem the flow is basically form BW to BO.
When they load the data at sender side the idocs are stucked with error status 2:
"Could not find code page for receiving system" in transaction BD87.
Also when I reprocess it is successful. But its is getting stucked in SM58 with errors like:
1)Error in RFC connnection
2)ERROR REQU_D38IW3WD0XGK1DA48DM96N12J PG# 8 in BW
When I execute it throes an error saying "Function Module does not existsor EXCEPTION raised".
Also are many queues stucked in SMQ1 Outbound.
Please help. Many Thanks.

Regarding error in XI File to IDoc scenario

Hi,
when i was doing file 2 idoc scenario i got this error "Unable to convert sender service to an ALE logical system". please resolve my issue as early as possible.

Uday,
Please go through these threads:
Unable to convert the sender service to an ALE logical system
How to convert Sender Party/Service to a Logical System?
Unable to convert the sender service to an ALE logical system
BR,
Alok
Edited by: Alok Sharma on Jan 31, 2008 12:39 PM

Idocs with errors added status-56 in file to idoc scenario- how to rectify

hi ,
in file to idoc scenario when i m sending the file from ftp server to IS Retail, file is successfully getting processed but the idoc is showing error ,when we see using WE05 tcode or BD87 , pl sugggest how to rectify it to make the status 53

Hi,
Have you configured the partner profile details? check these steps..
1. In the receiver system you must configure the partner profile for your sender system in WE20.
2. Add the IDoc message type to inbound parameters of the partner profile and configure the appropriate process code.
2. Fill the Logical system name for your senderservice-->Adapter Specific identifiers in ID.
<a href="/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi File-to-IDOC Scenario</a> By Venugopalarao
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> By Ravikumar Allampalam
Regards
San

IDOC is posting with Errors in File to IDOC scenario

Hi,
I did the File to IDOC scenario for CREMAS . IDOC is posting with Errors .. i.e. in the status record it was showing 56- EDI: Partner profile inbound not available ..
If I manually process that IDOC in WE19 , then it was processing successfully.. and in the we19 it was showing Inbound Processing : Port Not Maintained but even though manually it was posting fine...
any ideas regarding this will be appriciated.....
Regards
Babu

Please check whether you had done the following assuming your doing File to Idoc
Settings in your Business service for the receiving system
Please specify the RFC detination, SAP System and Client of the Receiving System in the adapter specific detials.
Settings in R/3
WE20 - Add the partner profile for the particular message type cremas and process code.
Your statement
" and that same logical system name had given as Message Specific Attributes in the Sender Business Sevice parameters in I.D "
Please do mention R/3 Details in the receiver business service or system.
Thnz

File to IDOC scenario error...

Hi all,
we hhave created an File to Idoc scenario .
we are getting the following error in SXMB_MONI t-code.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BUS_SENDER</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service BUS_SENDER to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
can any one plz say wat this error might be..
TIA
Regards,
Raj

Hi,
The problem occurs when sender and receiver business system or business service does not have a logical system name.
ID - Integration Directory
Posting the IDOC'S into SAP R/3 System, sender and receiver business system or business service requires the logical system name. If the business system (Web As ABAP) does not have the logical system name, then add the logical system for business system.
If business system type = Web AS ABAP, then add the Logical system in Technical System level and Save.
If business system type = Third-Party, then add the logical system in business system level and Save.
If the business service does not have the logical system name in ID, it needs to be configured as follows.
Go to ID and click the Business service -> Services -> Adapter Specific Identifiers. Enter the logical system name and Save.
Apply and activate.
hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

How to catch Posting error in File to IDoc Scenario?

I have successfully completed File to IDoc Scenario. Now I am interested in catching posting error. i.e., if mapping goes well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a mail should go to a recipient.
Can anybody suggest the solution.
Regards,
Suraj Kumar

Hi Suraj,
this can be done by triggerring an alert to the recipient.chk out these links to trigger a alert
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
regards
jithesh

ATTRIBUTE_IDOC_RUNTIME error in File-IDOC Scenario

Hi,
I got this error in FIle-IDOC scenario.
ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPMMX, client , RFC destination contain errors
There are many threads on same issue. Almost in all threads, the suggestion given was, we need to check the Channel Definition(Port should be SAP<SYSID> and not SAP<SYSID>_<CLIENT>)
I have given the proper values for RFC desitnation and port. Even then, I m getting this error.
Is there any other suggestions?

Hi aarthi,
I suggest u chk all d settings dat u hav done..
Steps for ALE settings:-
Steps for XI
Step 1)
 Goto SM59.
 Create new RFC destination of type 3(Abap connection).
 Give a suitable name and description.
 Give the Ip address of the R3 system.
 Give the system number.
 Give the gateway host name and gateway service (3300 + system number).
 Go to the logon security tab.
 Give the lang, client, username and password.
 Test connection and remote logon.
Step 2)
 Goto IDX1.
 Create a new port.
 Give the port name.
 Give the client number for the R3 system.
 Select the created Rfc Destination.
Step 3)
 Goto IDX2
 Create a new Meta data.
 Give the Idoc type.
 Select the created port.
Steps for R3.
Step 1)
 Goto SM59.
 Create new RFC destination of type 3(Abap connection).
 Give a suitable name and description.
 Give the Ip address of the XI system.
 Give the system number.
 Give the gateway host name and gateway service (3300 + system number).
 Go to the logon security tab.
 Give the lang, client, username and password.
 Test connection and remote logon.
Step 2)
 Goto WE21.
 Create a port under transactional RFC.(R3->XI)
 Designate the RFC destination created in prev step.
Step 3)
 Goto SALE.
 Basic settings->Logical Systems->Define logical system.
 Create two logical systems(one for XI and the other for R3)
 Basic settings->Logical Systems->Assign logical system.
 Assign the R3 logical system to respective client.
Step 4)
 Goto WE20.
 Partner type LS.
 Create two partner profile(one for XI the other for R3).
 Give the outbound or inbound message type based on the direction.
Step 5)
 Not mandatory.
 Goto BD64.
 Click on Create model view.
 Add message type.
Step 6)
 Goto WE19
 Give the basic type and execute.
 fill in the required fields.
 Goto IDOC->edit control records.
 Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
 Click outbound processing.
Step 7)
 Go to SM58
 if there are any messages then there is some error in execution.
 Goto WE02.
 Check the status of the IDOC.
 Goto WE47.
 TO decode the status code.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
reward points if helpful...
MenoN

Error in executing scenario File to Idoc

Hi,
I did File to Idoc scenario.
In that I got error in status record at r/3 system...
status record code is 51....Error is Application document not posted
regards,
pavani

Hi Ravi,
i mapped some of the data fields. Control fields i disabled them....
Can you giv me wat are the importent fields for Cremas04...
I did all the field that are indicated in red color..
still i m getting error
Message was edited by:
Pavani Kumari Kokkiragedda

Getting Error 26 in ALE IDOC scenario .- EDI Syntax Check Error...

Hi..
i am working in ALE Idoc scenario...I am getting Status 3 as well as status 26 in we02 transaction in my custom IDOC scenario for outbound process..
The error is 'EDI- SYntax Check'..
How to remove this error..
Pls help.

ya, there is only one segment available in IDOC..named i.e zseg_a .
So , error in postion is avoided..
How to find syntax error then?

Error in Idoc scenario

Similar Messages

Maybe you are looking for