Error in idoc with status 20 "Error triggering EDI Subsystem"
Dear All,
I have query related to IDOC Status 20.
I am tirggering IDOC with standard t-code from IS-Retail system. I have created two ports a) TRFC port and b)File port .
<b>We are having sending and receiveing application on two different OS i.e one XI on Windows and IS Retail on AIX(Unix). I am not able to send idoc to another system. I am getting these IDOC status in WE05 (STATUS 01 , 30 , 03 , 20 )</b>
Keeping the above fatcs in mind could you please tell me how to remove the <b>error with status 20 "Error triggering EDI Subsystem".</b>
Hi prabhat,
You should have checked the automatic triggering possible at the file port level and the partner profile setting could be 'start subsytem'.
Go to WE21 and do the access test for the file port.
Once you done and find no issues then go to SM59 and test the connection for the RFC destination assigned to the ports.Possibly it has to do with the RFC destination.
Other reasons could be yours is a test client and got refreshed recently.so the production client settings might be causing this error.Check with your basis to get it working.
other reason could be the logical system assigned to the client should be having production client's name.
Check these.
I am sure you should be able to solve this issue.
Thank you.
regards,
karun.M
Similar Messages
-
IDOC Error Status 20 - Error triggering EDI subsystem
Hi Expert
I have articles which have 2 different EAN, (KG & EA) for single store i am getting error , if i generated a IDOC for EA articles, not KG articles.
Kindly suggest me a solution
Regard
NabilHi,
Please check with this link, it could be helpful.
Error in idoc with status 20 "Error triggering EDI Subsystem" -
IDOC : error message 20 : Error triggering EDI subsystem
Hi,
I am creating an extended idoc for WP_PLU message type . I am sending the data from my LS to KU(Customer).
In WE20, I have configured the message type for that KU. I am using an XML port .
The problem is that the Idoc file is getting created properly but it is thowing this message : Error 20 : Error triggering EDI Subsystem.
In WE21 , I have ticked the Start subsytem radiobutton. I am not using any Middleware.It is simple data transfer .
Same thing is working file when I am assigning a File port instead of XML port.
Please help me on this urgently.Dear All,
Many thanks for all suggestions. Very appreciated it guys.
My problem solved, the issue was actually from the Functional configuration.
After debugging i found out that there's a option to generate a trigger file (related to POS Outbound). If you tick this option then maybe you have to maintain the download path somewhere.
My case is the option was ticked but system can't find the path.
SAP put as error message 20 in the IDOC status.
This maybe can explain also why i still can see my IDOC reached XI and file generated. Since the issue is not really related to any setting in IDOC but more to business configuration.
Best Regards,
Victor. -
20:Error triggering EDI subsystem
Dear All.
I am tirggering IDOC with standard t-code(WPMA) from SAP to middleware( It provides Sap Adapter ).
1) I have created TRFC port (SM59).
2) Defined the port(WE21)
3) Defined the Partner Profile(WE21) Outbound IDOC TYPE: wp_ean01
then, I tirgger IDOC with WPMA.
but , the status is :
20 Error triggering EDI subsystem
03 Data passed to port OK
IDoc sent to SAP system or external program
30 IDoc ready for dispatch (ALE service)
Receiver exists , No filters , No conversion , Version conversion
01 IDoc generated
It is strange that the middleware can receive the data which I send.
What is the problem?Hi Peter.
First : The RFC destination is OK, I can test it , the middleware can receive
the IDOC data.
Secondly : I define the port(WE21: Transcation RFC).there is another port
( file port) in SAP, but I do not think it can trigger the processing. -
Error Triggering EDI Subsystem 20
When we try to send IDOCs from SAP to XI system using WPMI transaction, we are getting status 20 ( Error Triggering EDI Subsystem).
What should be done to overcome this issue?
Regards
RajHi Rajagopal,
This thread solves your question...
Error in idoc with status 20 "Error triggering EDI Subsystem"
Can you please check if the PORT and LS details in the control record are correct
cheers
Prashanth
P.S Please mark helpful answers -
Error triggering EDI subsystem
Hi ,
I am getting error - Error triggering EDI subsystem- while posting Idocs in R/3 to XI.
<b><u>But messages are reaching XI and final XML files also getting generated in outbound location, no issues</u></b>.
I AM USING PARTNER PROFILE OF TYPE - KU(CUSTOMER)
Following are the status messages i could see in R/3 (tran code-WE05):
20 Error triggering EDI subsystem
03 Data passed to port OK
IDoc sent to SAP system or external program
30 IDoc ready for dispatch (ALE service)
Receiver exists , No filters , No conversion , Version conversion
01 IDoc generated
Please suggest me how to get rid of this error.Hi Rajesh,
Check the ports (we21), RFC destinations, Partner profiles are defined correctly or not.
Regards
Kannaiah -
Error triggering EDI subsystem : Error#20
Getting error 20: Error triggering EDI subsystem while triggering IDOC for XI. <u><i><b>But, messages are getting posted into XI and final XML files also getting generated in outbound location.</b></i></u>
I am using partner profile of type customer in R/3.
Following are the status messages I could see in WE05.
20 Error triggering EDI subsystem
03 Data passed to port OK
IDoc sent to SAP system or external program
30 IDoc ready for dispatch (ALE service)
Receiver exists , No filters , No conversion , Version conversion
01 IDoc generatedRajesh,
While creating the Partner Profile, have you added something in the EDI Standard tab?
By default if the requirement is only to post an idoc to Xi, you need not add anything to the EDI standard tab for your outbound Idoc entry in We20.
Regards
Bhavesh -
Error triggering EDI subsystem (GIS): Process request without transaction.
I'm trying to configure SAP to trigger the EDI subsytem (Sterling's GIS). I'm getting error status "20":
Error for Remote Function Call with port "GIS"
Error message from RFC_REMOTE_EXEC
Process request without transaction. TID is empty.
Does anyone know what this means?
Thank you,Here is the SAPSuite Adapter Config in GIS:
Service Name COMP_SapSuiteALE
Service Type SAP Suite Adapter
Description ALE based IDoc XFer
System Name COMP_SapSuiteALE
Group None provided
SAP Integration Mode ALE based IDoc
SAP system is loadbalanced No
Client 300
User sapadmin
Language EN
Code Page 1100
Start RFC Server automatically Yes
RFC Server Instances 1
Program ID GISR3D
Outbound Process to start COMP_SAPOutboundALE
Outbound Encoding UTF8
Wait for synchronous RFC Outbound response Yes
Response timeout (seconds, 0=unlimited) 0
Delete TIDs automatically Yes
Delete TIDs after (days) 30
Register Remote Function Calls (BAPI or RFC Mode only) None (for IDoc modes or BAPI/RFC Inbound)
Filter online RFC list by None provided
Use hard max. connections limit ( Off = soft limit ) No
Max. Connections 4
Soft Limit Delay Time (seconds) 20
Connection Check Interval (seconds) 30
Connection Idle Time (seconds) 240
Close session after maximum session time No
Max. Session Time (minutes) 20
User admin -
Hi,
Can any one tell me the reason for idoc status as 68.......in which case the system will show me the idoc status as 68
Thanks,
ShilpaIDoc status Description
Outbound values :-->
00 Not used, only R/2
01 IDoc generated
02 Error passing data to port
03 Data passed to port OK
04 Error within control information of EDI subsystem
05 Error during translation
06 Translation OK
07 Error during syntax check
08 Syntax check OK
09 Error during interchange handling
10 Interchange handling OK
11 Error during dispatch
12 Dispatch OK
13 Retransmission OK
14 Interchange Acknowledgement positive
15 Interchange Acknowledgement negative
16 Functional Acknowledgement positive
17 Functional Acknowledgement negative
18 Triggering EDI subsystem OK
19 Data transfer for test OK
20 Error triggering EDI subsystem
21 Error passing data for test
22 Dispatch OK, acknowledgement still due
23 Error during retransmission
24 Control information of EDI subsystem OK
25 Processing despite syntax error (outbound)
26 Error during syntax check of IDoc (outbound)
27 Error in dispatch level (ALE service)
28 Not used
29 Error in ALE service
30 IDoc ready for dispatch (ALE service)
31 Error - no further processing
32 IDoc was edited
33 Original of an IDoc which was edited
34 Error in control record of IDoc
35 IDoc reloaded from archive
36 Electronic signature not performed (timeout)
37 IDoc added incorrectly
38 IDoc archived
39 IDoc is in the target system (ALE service)
40 Application document not created in target system
41 Application document created in target system
42 IDoc was created by test transaction
Inbound Values::-->
50 IDoc added
51 Application document not posted
52 Application document not fully posted
53 Application document posted
54 Error during formal application check
55 Formal application check OK
56 IDoc with errors added
57 Test IDoc: Error during application check
58 IDoc copy from R/2 connection
59 Not used
60 Error during syntax check of IDoc (inbound)
61 Processing despite syntax error (inbound)
62 IDoc passed to application
63 Error passing IDoc to application
64 IDoc ready to be transferred to application
65 Error in ALE service
66 IDoc is waiting for predecessor IDoc (serialization)
67 Not used
68 Error - no further processing
69 IDoc was edited
70 Original of an IDoc which was edited
71 IDoc reloaded from archive
72 Not used, only R/2
73 IDoc archived
74 IDoc was created by test transaction -
5 IDOC with status 29 Error in ALE service
hi there,
im looking at this similar problem with less information on me the only info i got is this can anyone help me out pls
IDOC Status Outbox:
IDOC failure between 13/07/2008 to 14/07/2009
1 IDOC with status 02 Error passing data to port
5 IDOC with status 29 Error in ALE service
IDOC Status InBox:
88 IDOC with status 51 Application document not posted
regards
rajuHi,
Check this thread.
DB13-DBCHECK by saving log-throwing DUMP:TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Regards. -
"Error during application input" while processing IDOC with status 51
Hi ,
I tried to post an error IDOC with status "51" of message type FIDCC2 using program RBDINPUT, it just creates a message "Error during application input" . It is not calling the application dialog . Does anyone have answer for this?
Thanks,
Hemant.HI,
Kindly check the RFC entries in t-code SM58.
If any entries are their please release them manually selecting each one and press "F6".
Regards,
Anil. -
Inbound Processing of Idocs with status other than success
Hi,
I am new to ALE/Idocs. Can anyone please let me know how can I process the Idocs which have the status other than 53.
Thanks & Regards,
IndiraHi,
In addition to the previous posts few more programs to process failed inbound IDocs are as mentioned below.
- Use program RBDAGAIE to process edited IDocs (IDocs with status 69)
- Use program RBDAPP01 to process IDocs failing with serialization issue (IDocs with status 66)
- Use program RBDAGAI2 to process IDocs after ALE inbound error (IDocs with status 56, 61, 63, 65)
~ Bineah -
Hi
In we05 transaction i see one idoc with status 32.
Status text was: idoc was edited
T100 text was: change data record was saved..
how to overcome this staus to post the idoc in target system??Hi,
RBDAGAIE - Reprocessing of Edited IDocs .
The above Standard program is for Reprocessing Idoc's.Go through this program.So that u will rectify that error.
Note: -
Description: This report reprocesses an edited IDoc in inbound or outbound processing. The edited IDoc has one of the following statuses:
32: IDoc edited (outbound)
69: IDoc edited (inbound). -
Reprocessing IDOCS with status 52
Hi all,
I facing a problem with IDOC status 52.
After correcting the error it had given, I want to reprocess it again.
Kindly tell me any report or transaction name for reprocessing IDOC with status 52.
Regards,
RahulHi Rahul,
You can use the below Programs for IDocs Reprocessing:
RBDMANI2 : Reprocess Idocs manually
RBDMANIN : Posting of IDocs with Status 51
RBDMOIND : Outbound Idocs status 03->12
RSEOUT00 : For Processing 30 Status IDocs
RBDAPP01 : For Processing 64 Status IDocs
RBDAGAIN : Reprocess Incorrect Outbound IDocs
RBDAGAI2 : Reprocessing of IDocs after ALE Input Error
Regards
Aneesh. -
Hi ,
I want to reprocess successful IDOCs with status 3 again,how can I do that?
I think logically we can change the status other than 3 and use BD 87 to reprocess them?is this correct way?Idoc numbers would change or they would create new IDOCs?
thank you,
BabuHi,
You can use transaction BD87 to monitor the IDoc statuses.
and use the following programs to reprocess outbound and inbound error IDoc(s).
RBDAGAI2 - Re-processing of IDocs after ALE Input Error
RBDAGAIE - Reprocessing of Edited IDocs
RBDAGAIN - Process Outbound IDocs with Errors Again
RBDAGAIP - New Posting of Partially Posted IDocs
RBDMANI2 - Manual Processing of IDocs: Post IDocs Not Yet Posted
RBDINPUT
<b>Reward points</b>
Regards
Maybe you are looking for
-
How to develop an Remote Enabled Function Module
Hi All, I'm totally new to ABAP. I have a requirement to create a Remote Enabled Function Module, which I can use to call from an external program like Java using JCo. The functionality of the Remote Function is to write some data into certain fields
-
Missing web page composer in portal installation
Hello to all, how can I find out, if the web page composer is installed in our actual portal enviroment? I visited the basic course SAPEP and worked with the web page composer, but in our admin area there is no access. I am not a basic guy, that is m
-
Final Cut Freezing Constantly: Pinwheels of Death!
Hey all, I am editing a project in Final Cut 7.0.3, and about every 5-10 minutes I have to stop editing for 1-3 minutes while the pinwheel of death spins 'round and 'round. The problem is specific to my Mac computer.... when I edit the project on a
-
Where can I get the plug in for firefox so I can view like internet explorer...
where can I get the plug in for firefox so I can view like internet explorer...
-
I had to sort out my iTunes library after a restore. Prior to this the library all resided on a Time Capsule all inside a single folder unsurprisingly called iTunes. Since the recovery, iTues has now created three more folders alongside the iTues fol