Error in implementing Slowly Chnaging Dimention 2

The error I am getting while implementing SCD2 everytime at the Step : Insert flow into I$ table (MINUS)
is:-
1790 : 42000 : java.sql.SQLException: ORA-01790: expression must have same datatype as corresponding expression
java.sql.SQLException: ORA-01790: expression must have same datatype as corresponding expression
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)

This error may be the caused by mis-matching the datatypes in the mapping or filter or join condition. Make sure that all the experssion has same data type else convert it into respective data type.
Ex. While mapping ,the particular column in target table may be number but you might have assigned varchar to that coulmn in the mapping field.
Does it make sense
Thanks
Madha

Similar Messages

Error while implemention ORDER_SAVE in CRM 2007

Hi,
At present we are experiencing an error while implementing badi ORDER_SAVE for sending CRM (2007)sales order data to PI (7.1) through ABAP proxy. In the BadI implementation we have created the Proxy Object through class (generated while defining the Proxy object in PI) and pass the SO details through the method available.
Error ' Administration header not Found' while saving the CRM sales Order.
Please let me know is any changes done in CRM 2007 for BadI implementation. Also suggest the best way to go forward to resolve this problem.
Thanks & Regards
Deb

U can do it.. But what i suggest is.. create a Z Function Module that will trigger in background in seperate task by passing the GUID.
In this Z FM write all your code related to the Proxy...

Graphics tab in REBDBU: Internal error when implementing extension

Hello,
Seek your kind help please.
I have entered in the building master data using REBDBE. We have a tab called Graphics. The pictures etc of the building are uploaded using a software called Korasoft. When i am clicking on the Graphics tab, it is entering the screen but immediately afterwards flashing the following message, "Internal error when implementing extension".
Doing a F1 on the error message shows the foll details:
"Diagnosis
An internal error occurred during the implementation of a customer-specific enhancement. A CHANGE-API module was called with an object reference (parameter IO_OBJECT) that was not instantiated in the required activity for changing (02). The API modules are function modules and begin with API_RE_.
Procedure
Within the BAdI implementation, transfer the parameter IO_OBJECT from the BAdI method directly to the API module. Make sure that the transferred instance is allowed to be changed."
I found that the SAP note 1139014 causes this error message to be generated. Note 1139014 forms a part of support pack level 13 (release 600). Recently we have upgraded our systems from support pack level 8 to support pack level 13. Naturally even this note got implemented at that time.
But now this note is causing this error message and so I will be grateful if someone can please tell me how to rectify the error.
Regards,
Suvarghya Dutta
Edited by: Suvarghya Dutta on Feb 11, 2009 5:30 PM

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

Internal error when implementing extension

Hello everyone
At the moment I create a new contract (transaction RECN) an error occurs and I can not solve.
Someone could help me?
Internal error when implementing extension (see long text)
Message no. RECAAP093
Diagnosis
Call of GET_EXTENSION( ) method for enhancement CL_FILACI_VICN01_EXTENSION failed.
It tried to use an add-on or customer-specific enhancement that is not implemented in your system.
To be able to determine the technical attributes of enhancement CL_FILACI_VICN01_EXTENSION, the RECA_STORABLE_EXT Business Add-In has to supply the desired information. However, this was not the case. In an implementation of RECA_STORABLE_EXT, the GET_OBJNAME_EXT( ) method must supply the required enhancement CL_FILACI_VICN01_EXTENSION.
Below is example code for GET_OBJNAME_EXT( ):
CASE ID_OBJNAME_STD.
WHEN '...'.
APPEND 'CL_FILACI_VICN01_EXTENSION' TO CT_OBJNAME_EXT.
ENDCASE.
For more information, refer to the documentation for the RECA_STORABLE_EXT Business Add-In.
Start BAdI Builder
Procedure
Contact your system administrator.
tks a lot!

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

Microsoft JScript runtime error: Not implemented

Unhandled exception at line 23, column 375 in
http://localhost:50189/Default.aspx
0x80004001 - Microsoft JScript runtime error: Not implemented
Line 23 is the javascript for insights
Any ideas on what I am missing? I am adding in only usage data and am getting the following error.

Hello John,
Do you have the same issue with the latest version of Application Insights in Azure Portal?
AI Java Script was changed, and a lot of bugs were fixed since the moment you posted this question (sorry for my late reply, not my area of expertise at all, so I missed this thread initially...), so everything might be working as expected already.
Dmitry Matveev

Mig7 project Debugging with ILA core - Timing Error in implementation

Hello,
I am designing a core which has only performing read/write operations to/from DDR3 SDRAM with MIG7 IP core. I am synthesizing and implementing without any problem if I have no ILA core present in the project. After adding the ILA core I am having errors at implementation (Route Design). I used Set up Debug wizard while creating cores and .xdc file.
After several trials I have seen 2 types of errors:
[Drc 23-20] Rule violation (PDRC-29) MMCM_adv_ClkFrequency_clkin1 - The calculated frequency value, 0.000 MHz, of the CLKIN1_PERIOD attribute on the MMCME2_ADV site MMCME2_ADV_X1Y1 (cell tranceiver/u_mig_7series_0_mig/u_ddr3_infrastructure/gen_mmcm.mmcm_i) is outside the allowed range (10.000 - 933.000 MHz). Please change the CLKIN1_PERIOD attribute value in order to be within the allowed range for this device.
[Drc 23-20] Rule violation (PDRC-34) MMCM_adv_ClkFrequency_div_no_dclk - The computed value 500.000 MHz (CLKIN1_PERIOD, net CLK) for the VCO operating frequency of the MMCME2_ADV site MMCME2_ADV_X1Y0 (cell dbg_hub/inst/USE_DIVIDER.U_GT_MMCM) falls outside the operating range of the MMCM VCO frequency for this device (600 - 1440 MHz). The computed value is (CLKFBOUT_MULT_F * 1000 / (CLKINx_PERIOD * DIVCLK_DIVIDE)). Please adjust either the input period CLKINx_PERIOD (10.000000), multiplication factor CLKFBOUT_MULT_F (5.000000) or the division factor DIVCLK_DIVIDE (1), in order to achieve a VCO frequency within the rated operating range for this device.
[Vivado_Tcl 4-16] Error(s) found during DRC. Router not run.
In xdc file I have changed two parameters:
set_property C_CLK_INPUT_FREQ_HZ 200000000 [get_debug_cores dbg_hub] -- it was 300000000 before as default
set_property C_ENABLE_CLK_DIVIDER true [get_debug_cores dbg_hub] -- it was false
I added xdc file and error description in the attachments.
I could not find any solution.
Best regards, Ali

I guess I have solved the problem, if it is a problem.
In the description of the property, C_CLK_INPUT_FREQ_HZ, it says that "this property is only used when C_ENABLE_CLK_DIVIDER property is set true". However when I set true it gives clock frequency error as I have given in the error description.
Then I have set C_ENABLE_CLK_DIVIDER property to false and then tried with that. And everything gone well. The project is working as I intented.
I guess there is a mistake in the explanation or I just misunderstood the sentence.
Thanks for the previous replays.

MATP- error after implementing note

Dear All,
We are working on MATP scenario. After configuring all the necessary settings we run availability check in simulation.
Initially when we ran availability check for small quantity, it was confirming in APO ( In ATP simulation). But while providing larger quantity, it was showing an ABAP error.
At the same time in R3, system gave an error saying u201Cerror in calling up function u201CBAPI_APOATP_CHECKu201D in APO server XYZ a calculation field is defined too smallu201D while checking availability for larger quantity.
To overcome this situation, we had implemented a note u201C1005131u201D. Now the dump in APO and error message in R3 is not coming, but it not confirming orders.
(When we check materials availability in R3, missing part button does not appear but at the same time system does not confirm any quantity)
Have anyone of you have faced similar situation? Please reply if anyone has any clue regarding this issue.
We are using SCM 7.0
Regards,
Nitesh

Hi Nitesh,
Are you using phantom assemblies ?
There can be a error during PDS explosion that causes the error. We faced the same error and implemented note 1147324.
Please implement note 1147324
Thanks,
Pavan Verma
Edited by: Pavan Verma on Jan 21, 2010 11:38 PM

Error during implementation of SAP Note 41715

Hi,
I got the following error during implementation of SAP Note 41715.
"Error during RFC connection to SAPNet, cannot update SAP Note"
Why do we get this error? Any ideas.
Thanks,
Ibrahim

Hi,
this SAP note is a very old SAP modification note.
I think, you have to do all work manually.
But have a look at the note: You have to install some other SAP notes before that!
Regards,
Klaus

Slowly changing Dimentions

How to deal With Slowly changing Dimentions
Thanks in advance
Bhaskar

Hi Vijay,
There are four such senarios like..
Slowly changing dimensions: let us suppose take Material (pen) belongs to material group(utility) in 1990 and it is changed to other group(daily utility) in 1995 ..
1) User needs data at the time of transaction only : then keep the both objects in same dimension table
2) User needs data at any time of transaction: means user will give some date then we need to fetch that group for that particular material in that date frame..then you need to keep matgroup as time-dependent navigational attribute of material...
Like these cases you can find out in the modelling sap material with the name tracking history...
Don't forget to Assign points..If it is useful..Points are always energy boosters for the helpers...

Errors in implementing Text Layout Framework text flow- selection event not found

please help me i have implemented the same project givan at adobe open source code site.
This is my code
<?xml version="1.0" encoding="utf-8"?>


<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml" label="Text Editor Example" initialize="init()" backgroundColor="#FFFFFF" horizontalScrollPolicy="off" verticalScrollPolicy="off">
<mx:Script>
<![CDATA[
import flashx.textLayout.container.ContainerController;
import flashx.textLayout.conversion.TextConverter;
import flashx.textLayout.edit.EditManager;
import flashx.textLayout.edit.IEditManager;
import flashx.textLayout.edit.ElementRange;
import flashx.textLayout.edit.SelectionState;
import flashx.textLayout.elements.Configuration;
import flashx.textLayout.elements.TextFlow;
import flashx.textLayout.events.StatusChangeEvent;
import flashx.textLayout.events.SelectionEvent;
import flashx.textLayout.formats.ITextLayoutFormat;
import flashx.textLayout.formats.TextLayoutFormat;
import flashx.textLayout.formats.TextAlign;
import flashx.textLayout.formats.VerticalAlign;
import flashx.textLayout.formats.BlockProgression;
import flashx.textLayout.formats.Direction;
import flashx.textLayout.tlf_internal;
import flashx.undo.UndoManager;
import flash.display.Sprite;
import flash.system.Capabilities;
// the textFlow being worked on
private var _textFlow:TextFlow = null;
// container to hold the text
private var _container:Sprite = null;
// data providers for enumerated list boxes
static private const textAlignData:Array = [
{ label:"Justify", data:TextAlign.JUSTIFY},
{ label:"Left", data:TextAlign.LEFT},
{ label:"Right", data:TextAlign.RIGHT},
{ label:"Center", data:TextAlign.CENTER},
{ label:"End", data:TextAlign.END},
{ label:"Start", data:TextAlign.START}
static private const verticalAlignData:Array = [
{ label:"Bottom", data:VerticalAlign.BOTTOM },
{ label:"Justify", data:VerticalAlign.JUSTIFY },
{ label:"Middle", data:VerticalAlign.MIDDLE },
{ label:"Top", data:VerticalAlign.TOP }
static private const blockProgressionData:Array = [
{ label:"TopToBottom", data:BlockProgression.TB },
{ label:"RightToleft", data:BlockProgression.RL }
static private const directionData:Array = [
{ label:"LeftToRight", data:Direction.LTR },
{ label:"RightToleft", data:Direction.RTL }
* initialization
private function init():void
// create a sprite to hold the TextLines
_container = new Sprite();
textArea.rawChildren.addChild(_container);
fontFamily.dataProvider = populateFontFamily();
versionInfo.text = "Vellum: " + flashx.textLayout.BuildInfo.kBuildNumber + (Configuration.tlf_internal::debugCodeEnabled ? " Debug" : " Release")
+ ", Flex: " + mx_internal::VERSION
+ ", Player: " + Capabilities.version;
* Create an array of available font families
static private function populateFontFamily():Array
// really this returns an array of fonts - would be nice to strip it down to just the families
var fonts:Array = Font.enumerateFonts(true);
var fontfamily:Array = new Array();
fonts.sortOn("fontName", Array.CASEINSENSITIVE);
for(var i:int = 0; i< fonts.length; i++)
// trace(fonts[i].fontName);
fontfamily.push({label: fonts[i].fontName, data: fonts[i].fontName});
return fontfamily;
/** called to set the size of this panel */
public function setSize(w:int,h:int):void
this.width = w;
this.height = h;
textArea.width = width;
textArea.height = height > bottomTabs.height ? this.height-bottomTabs.height : 0;
if (_textFlow)
_textFlow.flowComposer.getControllerAt(0).setCompositionSize(textArea.width,textArea.heigh t);
_textFlow.flowComposer.updateAllControllers();
/** called when the bottom tabs finally gets sized. */
private function bottomTabsResize():void
setSize(width,height);
/** The TextFlow to edit. */
public function get textFlow():TextFlow
{ return _textFlow; }
public function set textFlow(newFlow:TextFlow):void
// clear any old flow if present
if (_textFlow)
_textFlow.flowComposer = null;
_textFlow = null;
_textFlow = newFlow;
if (_textFlow)
_textFlow.flowComposer.addController(new ContainerController(_container,textArea.width,textArea.height));
// setup event listeners for selection changed and ILG loaded
_textFlow.addEventListener(SelectionEvent.SELECTION_CHANGE,selectionChangeListener,false,0 ,true);
_textFlow.addEventListener(StatusChangeEvent.INLINE_GRAPHIC_STATUS_CHANGE,graphicStatusCha ngeEvent,false,0,true);
// make _textFlow editable with undo
_textFlow.interactionManager = new EditManager(new UndoManager());
// initialize with a selection before the first character
_textFlow.interactionManager.selectRange(0,0);
// compose the new textFlow and give it focus
_textFlow.flowComposer.updateAllControllers();
_textFlow.interactionManager.setFocus();
/** Receives an event any time an ILG with a computed size finishes loading. */
private function graphicStatusChangeEvent(evt:StatusChangeEvent):void
// recompose if the evt is from an element in this textFlow
if (_textFlow && evt.element.getTextFlow() == _textFlow)
_textFlow.flowComposer.updateAllControllers();
/** Receives an event any time the selection is changed. Update the UI */
private function selectionChangeListener(e:SelectionEvent):void
var selectionState:SelectionState = e.selectionState;
var selectedElementRange:ElementRange = ElementRange.createElementRange(selectionState.textFlow, selectionState.absoluteStart, selectionState.absoluteEnd);
// set display according to the values at the beginning of the selection range. For point selection/characterFormat use getCommonCharacterFormat as that tracks pending attributes waiting for the next character
var characterFormat:ITextLayoutFormat = _textFlow.interactionManager.activePosition == _textFlow.interactionManager.anchorPosition ? _textFlow.interactionManager.getCommonCharacterFormat() : selectedElementRange.characterFormat;
var paragraphFormat:ITextLayoutFormat = selectedElementRange.paragraphFormat;
var containerFormat:ITextLayoutFormat = selectedElementRange.containerFormat;
updateComboBox(fontFamily,characterFormat.fontFamily);
fontSize.text = characterFormat.fontSize.toString();
lineHeight.text = characterFormat.lineHeight.toString();
updateComboBox(textAlign,paragraphFormat.textAlign);
textIndent.text = paragraphFormat.textIndent.toString();
columnCount.text = containerFormat.columnCount.toString();
columnGap.text = containerFormat.columnGap.toString();
updateComboBox(verticalAlign,containerFormat.verticalAlign);
updateComboBox(blockProgression,_textFlow.computedFormat.blockProgression);
updateComboBox(directionBox,_textFlow.computedFormat.direction);
/** Helper function to update a comboBox in the UI */
private function updateComboBox(box:ComboBox,val:String):void
for (var i:int = 0; i < box.dataProvider.length; i++)
if (box.dataProvider[i].data == val)
box.selectedIndex = i;
return;
box.text = val;
* These functions are helpers for the various widgets to actually perform the operations on the TextFlow
private function changeFontFamily(newFontFamily:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var cf:TextLayoutFormat = new TextLayoutFormat();
cf.fontFamily = newFontFamily;
IEditManager(_textFlow.interactionManager).applyLeafFormat(cf);
_textFlow.interactionManager.setFocus();
private function changeFontSize(newFontSize:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var cf:TextLayoutFormat = new TextLayoutFormat();
cf.fontSize = newFontSize;
IEditManager(_textFlow.interactionManager).applyLeafFormat(cf);
_textFlow.interactionManager.setFocus();
private function changeLeading(newLeading:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var cf:TextLayoutFormat = new TextLayoutFormat();
cf.lineHeight = newLeading;
IEditManager(_textFlow.interactionManager).applyLeafFormat(cf);
_textFlow.interactionManager.setFocus();
private function changeTextAlign(newAlign:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var pf:TextLayoutFormat = new TextLayoutFormat();
pf.textAlign = newAlign;
IEditManager(_textFlow.interactionManager).applyParagraphFormat(pf);
_textFlow.interactionManager.setFocus();
private function changeTextIndent(newIndent:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var pf:TextLayoutFormat = new TextLayoutFormat();
pf.textIndent = newIndent;
IEditManager(_textFlow.interactionManager).applyParagraphFormat(pf);
_textFlow.interactionManager.setFocus();
private function changeColumnCount(newCount:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var cf:TextLayoutFormat = new TextLayoutFormat();
cf.columnCount = newCount;
IEditManager(_textFlow.interactionManager).applyContainerFormat(cf);
_textFlow.interactionManager.setFocus();
private function changeColumnGap(newGap:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var cf:TextLayoutFormat = new TextLayoutFormat();
cf.columnGap = newGap;
IEditManager(_textFlow.interactionManager).applyContainerFormat(cf);
_textFlow.interactionManager.setFocus();
private function changeVerticalAlign(newAlign:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var cf:TextLayoutFormat = new TextLayoutFormat();
cf.verticalAlign = newAlign;
IEditManager(_textFlow.interactionManager).applyContainerFormat(cf);
_textFlow.interactionManager.setFocus();
private function changeBlockProgression(newProgression:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var cf:TextLayoutFormat = new TextLayoutFormat();
cf.blockProgression = newProgression;
IEditManager(_textFlow.interactionManager).applyFormatToElement(_textFlow,cf);
_textFlow.interactionManager.setFocus();
/** Set direction on the rootElement. This effects both columnDirection and default reading order. */
private function changeDirection(newDirection:String):void
if (_textFlow && _textFlow.interactionManager is IEditManager)
var pf:TextLayoutFormat = new TextLayoutFormat();
pf.direction = newDirection;
IEditManager(_textFlow.interactionManager).applyFormatToElement(_textFlow,pf);
_textFlow.interactionManager.setFocus();
]]>
</mx:Script>

<mx:Canvas id="textArea" width="520" height="400"/>
<mx:TabNavigator id="bottomTabs" width="100%" creationPolicy="all" paddingLeft="4" paddingBottom="8" backgroundColor="#D9D9D9" color="#202020" horizontalScrollPolicy="off" verticalScrollPolicy="off" resize="bottomTabsResize()">
<mx:HBox label="Text" backgroundColor="#D9D9D9" width="496" horizontalScrollPolicy="off" verticalScrollPolicy="off" >
<mx:Label text="Font:"/>
<mx:ComboBox id="fontFamily" editable="true" enter="changeFontFamily(fontFamily.text)" close="changeFontFamily(fontFamily.text)" width="200"/>
<mx:Label text="Size:"/>
<mx:TextInput id="fontSize" enter="changeFontSize(fontSize.text)" width="40"/>
<mx:Label text="LineHeight:"/>
<mx:TextInput id="lineHeight" enter="changeLeading(lineHeight.text)" width="40"/>
</mx:HBox>
<mx:HBox label="Para" backgroundColor="#D9D9D9" width="496">
<mx:Label text="Alignment:"/>
<mx:ComboBox id="textAlign" close="changeTextAlign(textAlign.selectedItem.data)" dataProvider="{textAlignData}"/>
<mx:Label text="FirstLineIdent:"/>
<mx:TextInput id="textIndent" enter="changeTextIndent(textIndent.text)" width="40"/>
</mx:HBox>
<mx:HBox label="Container" backgroundColor="#D9D9D9" width="496">
<mx:Label text="Columns:"/>
<mx:TextInput id="columnCount" toolTip="auto or a number" enter="changeColumnCount(columnCount.text)" width="40"/>
<mx:Label text="Gap:"/>
<mx:TextInput id="columnGap" toolTip="a number" enter="changeColumnGap(columnGap.text)" width="40"/>
<mx:Label text="VerticalAlignment:"/>
<mx:ComboBox id="verticalAlign" close="changeVerticalAlign(verticalAlign.selectedItem.data)" dataProvider="{verticalAlignData}"/>
</mx:HBox>
<mx:HBox label="Flow" backgroundColor="#D9D9D9" width="496">
<mx:Label text="Progression:"/>
<mx:ComboBox id="blockProgression" close="changeBlockProgression(blockProgression.selectedItem.data)" dataProvider="{blockProgressionData}"/>
<mx:Label text="Direction:"/>
<mx:ComboBox id="directionBox" close="changeDirection(directionBox.selectedItem.data)" dataProvider="{directionData}"/>
</mx:HBox>
<mx:HBox label="Version" backgroundColor="#D9D9D9" width="496">
<mx:TextInput id="versionInfo" editable="false" width="100%"/>
</mx:HBox>
</mx:TabNavigator>

</mx:VBox>

Probably something is going wrong when the application is being built, and textLayout.SWC is not found. Are you using Flex or Flash Pro to build it? What version? Does this error come up when you build the project, or when you run it?
Thanks,
- robin

Getting error while implementing the Export to Excel in VC

Hi
By refering the following link, i have implemented Export To Excell functionality in VC.
When i copied the following formula in the respective formula window, then it is giving the following error. can any body awareof what is the problem.
copied formula :
"pcd!3aportal_content!2fcom.sap.pct!2fplatform_a
dd_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.b
ex?QUERY=" & STORE@REPTNAME &
"&BI_COMMAND_1-
BI_COMMAND_TYPE=EXPORT&BI_COMMAND
1-EXPORTFORMAT=XLS&BI_COMMAND_1-
null="
Occurred Error:
Field "REPTNAME" does not exist in DataStore parameters.
Referred link to implement
2) Another one that's in the Visual Composer WIKI:
https://wiki.sdn.sap.com/wiki/display/VC/Exportingdatafrom+VC
Regards
Vijay

Hi Anukur,
Thanks for the reply,
I have copied same formula which is given in that doc. now i have added one field
REPTNAME. Now i have come from that problem. Formula showin as valid. when i click on check button.
Now when i compile , i havnt got any any but when click on deploy i am getting the following error.
Error in compiling Flex application: Error 1002: String literal was not properly terminated
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:265)
Error 1033: ')' expected
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:266)
Error 1205: The statement 'dd_ons' is incomplete.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:266)
Error 1025: Left side of assignment operator must be variable or property.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:268)
Error 1033: ':' expected
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:269)
Error 1025: Left side of assignment operator must be variable or property.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:270)
Error 1033: ';' expected
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:271)
Error 1205: The statement '' is incomplete.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:269)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:271)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:272)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:273)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:281)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:293)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:298)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:299)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:301)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:323)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:336)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:337)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:338)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:340)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:347)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:370)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:393)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:425)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:470)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:479)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:489)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:509)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:521)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:535)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:543)
Error 1128: Attribute used outside class.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:559)
Error 1030: Statement block must be terminated by '}'
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:19)
Error 1000: Syntax error.
      (D:\usr\sap\EPD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\NewTestModel_28609\FLEX_COMPILATION_FOLEDR\AADMV.mxml:570)
Failed to compile AADMV.mxml
Can u tell what is the problem here
Regards
Vijay

TREX Error while implementing a Rule Modeler in ERMS

Hi Experts,
I am getting the below error when i am implementing a Rule in ERMS. Please suggest how to rectify the error.
Exception in method execute(CL_CRM_ERMS_SERVICE_MANAGER) : Service CL_CRM_ERMS_ADD2FB_CA failed. TREX error:Error in the RFC communication: Error when opening an RFC connection (IMSDEFAULT)[error code =] at: CL_CRM_ERMS_ADD2FB_CA=========CP : CL_CRM_ERMS_
Processing policy ZTEST_RULE1
Exception in method execute(CL_CRM_ERMS_SERVICE_MANAGER) : Service CL_CRM_ERMS_RULE_EXEC failed. Policy not found in repository:ERMS:ZTEST_RULE1 at: CL_CRM_ERMS_RULE_REPOSITORY===CP : CL_CRM_ERMS_RULE_REPOSITORY===CM005 : 44
BOR: returned from Service Manager.
Regards,
Niloufer

Hi Niloufer123
Have you regenerated your Repository after making changes?
If not, go to SA38 and run program CRM_ERMS_REGEN_RULES for ERMS context for your Policy (check box checkboxes).
Now re-run your scenario. Hopefully this has helped.
Thanks,
Andrew G.

"general access denied error" while implementing out-of-process COM Server Implementation in Windows Phone 8.1

I have a Service (.exe) where I was registering for my COM Component like below
CoInitializeEx(NULL, COINIT_MULTITHREADED);
HRESULT hres = CoInitializeSecurity(NULL, -1, NULL, NULL, RPC_C_AUTHN_LEVEL_NONE, RPC_C_IMP_LEVEL_IMPERSONATE, NULL, EOAC_NONE, 0);
if (hres != S_OK)
OutputDebugStringA("Security Descriptor not initialized");
ITypeLib* pTypeLib;
HRESULT hr_1 = LoadTypeLibEx(L"ServiceIdl.tlb", REGKIND_REGISTER, &pTypeLib);
if (pTypeLib != NULL)
pTypeLib->Release();
RegisterServer(L"Service.exe", CLSID_classAImpl, L"ClassAImpl Sample", L"Component.ClassAImpl", L"Component.ClassAImpl.1", 0);
g_hEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
DWORD reg = 0;
IClassFactory *pIFactory = new classAFactory;
HRESULT hr0 = CoRegisterClassObject(CLSID_classAImpl, pIFactory, CLSCTX_LOCAL_SERVER, REGCLS_MULTIPLEUSE, &reg);
if (FAILED(hr0))
OutputDebugStringA("classAImpl is not registered");
CoUninitialize();
exit(1);
HRESULT hr1 = CoResumeClassObjects();
if (hr1 == S_OK)
OutputDebugStringA("classAImpl is Resumed Registering");
WaitForSingleObject(g_hEvent, INFINITE);
CloseHandle(g_hEvent);
CoRevokeClassObject(reg);
pIFactory->Release();
CoUninitialize();
From Client Code I am CreatingInstance Like Below
COSERVERINFO si;
MULTI_QI qi;
COAUTHINFO cai = { RPC_C_AUTHN_NONE, RPC_C_AUTHZ_NONE, 0, RPC_C_AUTHN_LEVEL_NONE, RPC_C_IMP_LEVEL_IMPERSONATE, 0, EOAC_NONE };
si.dwReserved1 = 0;
si.pwszName = L"\\\\localhost";
si.pAuthInfo = &cai;
si.dwReserved2 = 0;
qi.pIID = &IID_classA;
qi.pItf = NULL;
qi.hr = 1;
CoInitializeEx(NULL, COINIT_MULTITHREADED);
HRESULT hr = CoCreateInstanceEx(CLSID_classAImpl, 0, CLSCTX_LOCAL_SERVER, &si, 1, &qi);
hr returning error "general access denied error";

I think we may run into the limitations mentioned in the remarks of CoCreateInstanceFromApp doc(show as below). If you can provide a repro project, I
can give you more details about what happens.
The CoCreateInstanceFromApp function reads class registrations only from Fusion contexts and manifests, and from the HKLM\SOFTWARE\Classes\CLSID registry hive.
Only built-in classes that are supported in the app container are supplied. Attempts to activate unsupported classes, including all classes installed by 3rd-party code as well as many Windows classes, result in error code
REGDB_E_CLASSNOTREG.
The CoCreateInstanceFromApp function is available to Windows Store apps. Desktop applications can call this function, but they have the same restrictions as Windows Store apps.
If you are trying to call some windows classes in your library, I will suggest you check how to create windows runtime out of process component by viewing
this sample. This is what I usually do.
To be honest, I did not try to implement the out of process COM component using the method you tried as we previsouly do on desktop. I will suggest you try to register a very simple library(like a signle class and single interface which returns an integer),
and see if it will work.
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
Alan Yao
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

Portal Runtime Error - MSS Implementation

Hi,
I am getting the following error in an iView for a MSS implementation (Workset: Employee Review/ Employee Document). The iView does not display correctly and I am showed the following error inside the iView:
<i><b>Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.singaporeair.test/com.singaporeair.MSS/com.singaporeair.MSS_Roles/com.singaporeair.MSS_CRP/com.sap.pct.hcm.mystaff/nf_2/com.sap.pct.hcm.eereview/com.singaporeair.MSS_Employee_Document/com.sap.pct.hcm.employeedocuments
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file</b></i>
Any help on the above would be greatly appreciated!
Thanks,
Aniruddh

1st question would be.. does that iview in that path actually exist. If it does it may be worth delting it from the page and then adding it again. if it doesn't, well that's your problem.
If it does exit then try previewing it. Looking at the error (Component Name : null) it could be that the par file has not deployed properly, in which case it is basically pointing at java code that doesn't exist. If that is the case look for any .err files at OS level, rename then to .par and restart j2ee.
Paul

Error in implementing Usage Tracking in OBIEE

Hi All,
I wants to implement Usage Tracking in my project. I have done all the steps as per link http://obiee101.blogspot.com/2008/08/obiee-setting-up-usage-tracking.html
But i am getting following error in NQServer.log file----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[59048] Usage Tracking encountered an insert statement execution error. This error has occurred 1 times and resulted in the loss of 1 insert statements since this message was last logged.
[nQSError: 16001] ODBC error state: S1000 code: 1456 message: [Oracle][ODBC][Ora]ORA-01456: may not perform insert/delete/update operation inside a READ ONLY transaction.
[nQSError: 16015] SQL statement execution failed.
I have also check by changing the Call_Interface in Connection Pool of Admin Tool from ODBC 3.5 to OCI 10g. By this chage i get ollowing error:
[59048] Usage Tracking encountered an insert statement execution error. This error has occurred 1 times and resulted in the loss of 1 insert statements since this message was last logged.
[nQSError: 17001] Oracle Error code: 3114, message: ORA-03114: not connected to ORACLE
at OCI call OCIStmtExecute.
[nQSError: 17011] SQL statement execution failed.
Please help....
Thanks in Advance...
Regards,
Avi

problem is solved....
Actually in NQServer.ini file i was using actual Database name instead of Admin Tool Physical Layer name at PHSICAL TABLE NAME: <database>.<schema>.<tablename>
and at CONNECTION POOL: <database name>.<connection pool>
thanks...

Error in implementing Slowly Chnaging Dimention 2

Similar Messages

Maybe you are looking for