Error in IMPORT_PROPER while applying SAP_APPL 12 SP in ECC 6
Hi All,
I am applying Support pack12 of SAP_APPL (SAPKH60012) in my ECC 6.0. The system is on linux with oracle 10.2 G.
the patch implementation is stopping at IMPORT_PROPER (Error_Stop). I have checked TP and everything is running fine. I am pasting below the action log of the same. Please let me know what could be the problem. Also let me know if required anything else.
Import phase 'IMPORT_PROPER' (15.01.2009, 08:29:49)
Error during executing the tp command 'tp IMPORT all ECD ...'
tp return code: '0012' , tp message: 'A tool used by tp aborted' , tp output:
This is tp version 372.04.08 (release 700, unicode enabled)
Warning: Parameter DICTIMP_PROC is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DICTIMP_PROC is no longer used.
ERROR: stopping on error 12 during MOVE NAMETABS
stopping on error 12 during MOVE NAMETABS
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
Details of the error situation can also be found in the import logs
Interrupt the import due to an error situation (15.01.2009, 08:31:35)
Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (15.01.2009, 08:31:40)
Thanks,
Bhanu Pratap Singh
Hi,
I went through SLOG and ALOG but it was too long and nothing appropriate is there. Find below the P090115.SID Log. It is saying to activate two shadow name tabs. but i didn't know how.
1 ETP172 MOVE OF NAMETABS
1 ETP101 transport order : "ALL"
1 ETP102 system : "ECD"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.08" "700"
1 ETP198
3 ETP399XMove Nametabs started in batch mode.
2 ETP399 processing modeflag 'A'
2 ETP301 -
2 ETP364 Begin: Act. of Shadow-Nametabs ("2009/01/15 22:46:56")
2 ETP301 -
2 ETP301 -
2 ETP338XActivation of Shadownametabs
2 ETP301 -
3 ETP379Xactivating Nametab "WVERW_045D":
2 ETP399 -
DB-ROLLBACK() -
2AETP399XWrite table "WVERW_045D ": pgntab call: SQL error.
3 ETP379Xactivating Nametab "WVERW_045G":
2 ETP399 -
DB-ROLLBACK() -
2AETP399XWrite table "WVERW_045G ": pgntab call: SQL error.
2 ETP301 -
3 ETP365 "0" Shadow-Nametabs activated
2 ETP362 "2" Shadow-Nametab activations failed
2 ETP364 Begin: Act. of Shadow-Nametabs ("2009/01/15 22:46:56")
2 ETP366 End: Act. of Shadow-Nametabs ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'W'
2 ETP301 -
2 ETP347XActivation of Shadownametabs (delete) with DDL
2 ETP301 -
2 ETP301 -
2 ETP301 -
3 ETP368 "0" Shadow-Nametabs deleted, DDL executed
3 ETP369 "0" Shadow-Nametab deletions failed
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP370 End: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'X'
2 ETP301 -
2 ETP347XActivation of Shadownametabs (delete) with DDL
2 ETP301 -
2 ETP301 -
2 ETP301 -
3 ETP368 "0" Shadow-Nametabs deleted, DDL executed
3 ETP369 "0" Shadow-Nametab deletions failed
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
P090115 Log
2 ETP370 End: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'Y'
2 ETP301 -
2 ETP347XActivation of Shadownametabs (delete) with DDL
2 ETP301 -
2 ETP301 -
2 ETP301 -
3 ETP368 "0" Shadow-Nametabs deleted, DDL executed
3 ETP369 "0" Shadow-Nametab deletions failed
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP370 End: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'F'
2 ETP301 -
2 ETP330XActivation of Shadownametabs with DDL
2 ETP301 -
2 ETP301 -
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
3 ETP362 "0" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'V'
2 ETP301 -
2 ETP330XActivation of Shadownametabs with DDL
2 ETP301 -
2 ETP301 -
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
3 ETP362 "0" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
1 ETP172 MOVE OF NAMETABS
1 ETP110 end date and time : "20090115224759"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Thanks,
Bhanu
Similar Messages
-
Error in import_phase while applying addon ST-PI 2008_710
when i am applying addon for ST-PI 2008_710 db2 databse , its strucking in import_proper phase and giving below error in sm21
Grp N Text
BY 2 Database error -104 at EXE
BY 0 > SQL0104N An unexpected token "LENGTH 4096" was found
BY 0 > following "_L" CLOB(99K) INLINE". Expected tokens may
BY 0 > include: "<references_spec>". SQLSTATE=42601
the below are the logs on OS level,
2WETP000 12:43:02: Retcode 1: error in DDL statement for "/ASU/STEPST " - repeat
2EETP345 12:43:14: Retcode 1: SQL-error "-104-SQL0104N An unexpected token "LENGTH 4096" was found
2EETP345 following "_L" CLOB(99K) INLINE". Expected tokens may include: "<references_spec>". SQ
2EETP345 LSTATE=42601" in DDL statement for "/ASU/STEPST "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 12:43:14: error in DDL, nametab for "/ASU/STEPST" not activated
3 ETP379X12:43:14: activating Nametab "/ASU/STEPST_V":
3 ETP355Xstatements:
3 ETP399 CREATE TABLE "/ASU/STEPST_V"
3 ETP399 ("SCENARIO" SAPDB6CHAR(000020)
3 ETP399 DEFAULT ' ' NOT NULL,
3 ETP399 "VERSION" SAPDB6CHAR(000014)
3 ETP399 DEFAULT ' ' NOT NULL,
3 ETP399 "INDX" SAPDB6CHAR(000006)
3 ETP399 DEFAULT '000000' NOT NULL,
3 ETP399 "LANGU" SAPDB6CHAR(000001)
3 ETP399 DEFAULT ' ' NOT NULL,
3 ETP399 "DESCRIPTION" SAPDB6CHAR(000060)
3 ETP399 DEFAULT ' ' NOT NULL,
3 ETP399 "DESCR_FILENAME" SAPDB6CHAR(000255)
3 ETP399 DEFAULT ' ' NOT NULL,
3 ETP399 "DESCR_MIMETYPE" SAPDB6CHAR(000128)
3 ETP399 DEFAULT ' ' NOT NULL,
3 ETP399 "BDS_DOC_ID" SAPDB6CHAR(000042)
3 ETP399 DEFAULT ' ' NOT NULL,
3 ETP399 "LEN_DESCR_L" SMALLINT
3 ETP399 DEFAULT 0 NOT NULL,
3 ETP399 "DESCRIPTION_L" SAPDB6VARCHAR(008000))
3 ETP399 IN "PID#POOLD"
3 ETP399 INDEX IN "PID#POOLI"
3 ETP399 LONG IN "PID#POOLD"
3 ETP399
2WETP000 12:43:14: Retcode 1: error in DDL statement for "/ASU/STEPST_V " - repeat
2EETP345 12:43:26: Retcode 1: SQL-error "-104-SQL0104N An unexpected token "LENGTH 4096" was found
2EETP345 following "_L" CLOB(99K) INLINE". Expected tokens may include: "<references_spec>". SQ
2EETP345 LSTATE=42601" in DDL statement for "/ASU/STEPST_V "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 12:43:26: error in DDL, nametab for "/ASU/STEPST_V" not activated
This table doesn't exist in database db2, but its showing active in sap.
Thanks - MJHi,
The system is struck in import_proper phase while applying addon and its patch in STPI, I am getting the below eror :-
Kindly hlep urgently. Getting the same error event i added the requests to buffer again.
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
SAPKITLREB)
Notes on phase IMPORT_PROPER
In this phase the system imports the Repository objects and the table
entries. The following are reasons why this phase may fail:
o TP_INTERFACE_FAILURE: The tp interface could not be called.
o TP_FAILURE: The tp program could not be executed. For more
information on this, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: A tp step could not be executed. To find the cause
of the error, see the appropriate log, such as the import log.
If a tp step 6, N, or S is specified in the termination message, it
is a step that is independent of the transport request. You can view
these logs in the log overview by choosing Import Steps Not Specific
to Transport Request.
Alternatively, see the logs in the following files in the log
subdirectory of your transport directory (usually /usr/sap/trans/log):
- tp step 6: P<YY><MM><DD>.<SID>
- tp step N: N<YY><MM><DD>.<SID>
- tp step S: DS<YY><MM><DD>.<SID>
To display these files, use the report RSPUTPRT or transaction AL11.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly. -
Error in DDIC_Activation while updating SAP_APPL
Hello All,
I'm getting following error while executing SAP_APPL component. Please guide me on this.
The import was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPK-60016INFICA, tp step "A", return
code 0008
In this phase the imported Dictionary objects are activated. This phase
can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The tp interface could not be called.
o TP_FAILURE: The program tp could not be executed. For more
information, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: The tp step DDIC activation could not be performed
successfully. To see the cause of the error in the activation log,
choose Goto -> Log -> Queue.
If you import two or more Support Packages in one queue, and you do
not activate them in the correct sequence, activation errors may
occur. In this case, the activation errors disappear when you repeat
the activation run. To do this, choose Support Package -> Import
Support Package Queue.
Thanks in advance,
UdayHi Rupali,
Please see below logs...
Following are the logs that I'm getting, please have a look and let kindly know the solution. SLOG: ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE ERROR SAPK-60016INFICA P01 A 0008 20120208012229 SAPUSER BASISADMIN paritas ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18 ERROR SAPK-60016INISPSCA P01 A 0008 20120208012229 SAPUSER BASISADMIN paritas ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18 ERROR SAPKH60016 P01 A 0008 20120208012229 SAPUSER BASISADMIN paritas STOP tp_getprots P01 J 20120208012235 BASISADMIN paritas START DD ACTIVATION P01 A 20120208012235 BASISADMIN paritas START tp_getprots P01 J 20120208012236 BASISADMIN paritas STOP tp_getprots P01 J 20120208012235 BASISADMIN paritas STOP DD ACTIVATION P01 A 20120208012236 BASISADMIN paritas ERROR SAPK-60016INFICA P01 A 0008 20120208012404 SAPUSER BASISADMIN paritas ERROR SAPK-60016INISPSCA P01 A 0008 20120208012404 SAPUSER BASISADMIN paritas ERROR SAPKH60016 P01 A 0008 20120208012404 SAPUSER BASISADMIN paritas STOP tp_getprots P01 J 20120208012412 BASISADMIN paritas STOP DD ACTIVATION P01 A 20120208012412 BASISADMIN paritas START DD ACTIVATION P01 A 20120208094139 BASISADMIN paritas START tp_getprots P01 J 20120208094139 BASISADMIN paritas ERROR SAPK-60016INFICA P01 A 0008 20120208094143 SAPUSER BASISADMIN paritas ERROR SAPK-60016INISPSCA P01 A 0008 20120208094143 SAPUSER BASISADMIN paritas ERROR SAPKH60016 P01 A 0008 20120208094143 SAPUSER BASISADMIN paritas STOP tp_getprots P01 J 20120208094146 BASISADMIN paritas STOP DD ACTIVATION P01 A 20120208094146 BASISADMIN paritas START DD ACTIVATION P01 A 20120208094300 BASISADMIN paritas START tp_getprots P01 J 20120208094300 BASISADMIN paritas ERROR SAPK-60016INFICA P01 A 0008 20120208094301 SAPUSER BASISADMIN paritas ERROR SAPK-60016INISPSCA P01 A 0008 20120208094301 SAPUSER BASISADMIN paritas ERROR SAPKH60016 P01 A 0008 20120208094301 SAPUSER BASISADMIN paritas STOP tp_getprots P01 J 20120208094304 BASISADMIN paritas STOP DD ACTIVATION P01 A 20120208094304 BASISADMIN paritas START DD ACTIVATION P01 A 20120208095211 BASISADMIN paritas START tp_getprots P01 J 20120208095211 BASISADMIN paritas ERROR SAPK-60016INFICA P01 A 0008 20120208095212 SAPUSER BASISADMIN paritas ERROR SAPK-60016INISPSCA P01 A 0008 20120208095212 SAPUSER BASISADMIN paritas ERROR SAPKH60016 P01 A 0008 20120208095212 SAPUSER BASISADMIN paritas STOP tp_getprots P01 J 20120208095215 BASISADMIN paritas STOP DD ACTIVATION P01 A 20120208095215 BASISADMIN paritas START DD ACTIVATION P01 A 20120208100218 BASISADMIN paritas START tp_getprots P01 J 20120208100218 BASISADMIN paritas ERROR SAPK-60016INFICA P01 A 0008 20120208100219 SAPUSER BASISADMIN paritas ERROR SAPK-60016INISPSCA P01 A 0008 20120208100219 SAPUSER BASISADMIN paritas ERROR SAPKH60016 P01 A 0008 20120208100219 SAPUSER BASISADMIN paritas STOP tp_getprots P01 J 20120208100222 BASISADMIN paritas STOP DD ACTIVATION P01 A 20120208100222 BASISADMIN paritas START DD ACTIVATION P01 A 20120208102626 BASISADMIN paritas START tp_getprots P01 J 20120208102626 BASISADMIN paritas ERROR SAPK-60016INFICA P01 A 0008 20120208102632 SAPUSER BASISADMIN paritas ERROR SAPK-60016INISPSCA P01 A 0008 20120208102632 SAPUSER BASISADMIN paritas ERROR SAPKH60016 P01 A 0008 20120208102632 SAPUSER BASISADMIN paritas STOP tp_getprots P01 J 20120208102636 BASISADMIN paritas STOP DD ACTIVATION P01 A 20120208102636 BASISADMIN paritas START DD ACTIVATION P01 A 20120208111556 BASISADMIN paritas START tp_getprots P01 J 20120208111556 BASISADMIN paritas ERROR SAPK-60016INFICA P01 A 0008 20120208111857 SAPUSER BASISADMIN paritas ERROR SAPK-60016INISPSCA P01 A 0008 20120208111857 SAPUSER BASISADMIN paritas ERROR SAPKH60016 P01 A 0008 20120208111857 SAPUSER BASISADMIN paritas STOP tp_getprots P01 J 20120208111902 BASISADMIN paritas STOP DD ACTIVATION P01 A 20120208111903 BASISADMIN paritas ALOG: SAPK-60016INFICA P01.ALL A 0008 20120208012229 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208012229 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208012229 SAPUSER BASISADMIN paritas SAPK-60016INFICA P01.ALL A 0008 20120208012404 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208012404 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208012404 SAPUSER BASISADMIN paritas SAPK-60016INFICA P01.ALL A 0008 20120208094143 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208094143 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208094143 SAPUSER BASISADMIN paritas SAPK-60016INFICA P01.ALL A 0008 20120208094301 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208094301 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208094301 SAPUSER BASISADMIN paritas SAPK-60016INFICA P01.ALL A 0008 20120208095212 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208095212 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208095212 SAPUSER BASISADMIN paritas SAPK-60016INFICA P01.ALL A 0008 20120208100219 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208100219 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208100219 SAPUSER BASISADMIN paritas SAPK-60016INFICA P01.ALL A 0008 20120208102632 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208102632 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208102632 SAPUSER BASISADMIN paritas SAPK-60016INFICA P01.ALL A 0008 20120208111857 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208111857 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208111857 SAPUSER BASISADMIN paritas SAPK-60016INFICA P01.ALL A 0008 20120208113704 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208113704 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208113704 SAPUSER BASISADMIN paritas SAPK-60016INFICA P01.ALL A 0008 20120208123518 SAPUSER BASISADMIN paritas SAPK-60016INISPSCA P01.ALL A 0008 20120208123518 SAPUSER BASISADMIN paritas SAPKH60016 P01.ALL A 0008 20120208123518 SAPUSER BASISADMIN paritas
Thanks in advance
Uday -
Error in SystemLog while applying
Hi all
I am frequently getting the following problem in System Log and perticulary while applying Support Packs , the log is as follows ..
Time Ty. Nr Cl. User Tcod MNo Text Date : 12.09.07
15:57:01 DIA 000 000 SAPSYS EH1 Event handler: Event ################################ is not defined
Details
Recording at local and central time........................ 12.09.2007 15:57:01
Task................ 01432 / Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........ SAPMSSY2
Problem class....... S Operation Trace
Development class... SBTC
Documentation for system log message EH 1 :
This message is output by the event handler. When an event occurs, the
event handler tries to start the jobs that are waiting for it.
This message indicates that when the event was validated, the system
determined that the event has not yet been defined in the SAP system.
The event handler will not continue to process the non-existent event.
No background jobs are started.
If the ID of this event is correct, you can avoid this situation in the
future by defining the event in the respective SAP system.
Please help me
rkHi Ravi Kumar,
This error is not related to support patches but it's related to some background job. Did any of your patch got struck?, check with all the background jobs as well.
Regards,
Hari.
PS: Awarding point's will get you some points. -
Opatch failed with error code 74 while applying 4329444
Hi all,
Im on the way to Updrade 10.2.0.1 to 10.2.03 for installaing aplication management Pack
while applied patch 432944 using opatch
Opatch errored out with code 74
here are the logs
Invoking OPatch 10.2.0.1.6
Oracle Interim Patch Installer version 10.2.0.1.6
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home : /U00010.00/Grid/oms10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/oms10g/oui
Log file location : /U00010.00/Grid/oms10g/cfgtoollogs/opatch/opatch2008-05-30_11-54-49AM.log
ApplySession applying interim patch '4329444' to OH '/U00010.00/Grid/oms10g'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 4329444: Required component(s) missing : [ oracle.rdbms, 10.1.0.4.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74
SEVERE:OPatch invoked as follows: 'apply '
INFO:
Oracle Home : /U00010.00/Grid/oms10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/oms10g/oui
Log file location : /U00010.00/Grid/oms10g/cfgtoollogs/opatch/opatch2008-05-30_11-54-49AM.log
INFO:Starting ApplySession at Fri May 30 11:54:50 IST 2008
INFO:Starting Apply Session at Fri May 30 11:54:50 IST 2008
INFO:ApplySession applying interim patch '4329444' to OH '/U00010.00/Grid/oms10g'
INFO:Starting to apply patch to local system at Fri May 30 11:54:50 IST 2008
INFO:Start the Apply initScript at Fri May 30 11:54:50 IST 2008
INFO:Finish the Apply initScript at Fri May 30 11:54:50 IST 2008
INFO:Patch 4329444 has no conflicts/superset wiht any other patch processed till now
INFO:Checking conflicts for patch: 4329444
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4329444
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4620348
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4547445
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4488715
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4141076
INFO:Checking conflicts/supersets for patch: 4329444 with patch:4067264
INFO:
Running prerequisite checks...
INFO:Space Needed : 616096
INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 4329444
INFO:Prereq checkComponents failed. So, checkApplicable returning without execution.
INFO:Prerequisite check "CheckApplicable" failed.
The details are:
Patch 4329444: Required component(s) missing : [ oracle.rdbms, 10.1.0.4.0 ]
SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Fri May 30 11:54:53 IST 2008
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Fri May 30 11:54:53 IST 2008
INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3435)
INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
INFO:File "/U00010.00/Grid/oms10g/.patch_storage/patch_unzip" cannot be deleted as it does not exist
Please help me in solving this issueee
Regards,
PradeepCheck the steps to follow if you have already upgraded your repository database. I would suggets you read the upgrade guide thoroughly.
You already have another related thread here:
upgrading grid control from 10.2.0.1 to 10.2.03 -
OPatch failed with error code 73 while applying patch 5191377
hi,
while applying patch 5191377
i got the following error
Oracle interim Patch Installer version 10.2.0.1.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /U00010.00/Grid/db10g
Central Inventory : /etc/oraInventory
from : /U00010.00/Grid/db10g/oraInst.loc
OPatch version : 10.2.0.1.0
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/db10g/oui
Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch-2008_May_29_15-36-47-IST_Thu.log
ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
Apply Session failed: ApplySession failed to prepare the system. ApplySession: Required component(s) [ oracle.sysman.repository.core, 10.2.0.1.0 ] not present in the Oracle Home or a higher version found.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
can anyone please help to solve this issue....
Regards
Pradeephi,
Please find the log
SEVERE:OPatch invoked as follows: 'apply '
INFO:
Oracle Home : /U00010.00/Grid/db10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/db10g/oui
Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log
INFO:Starting ApplySession at Thu May 29 17:34:01 IST 2008
INFO:Starting Apply Session at Thu May 29 17:34:01 IST 2008
INFO:ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
INFO:Starting to apply patch to local system at Thu May 29 17:34:01 IST 2008
INFO:Start the Apply initScript at Thu May 29 17:34:01 IST 2008
INFO:Finish the Apply initScript at Thu May 29 17:34:01 IST 2008
INFO:Patch 5191377 has no conflicts/superset wiht any other patch processed till now
INFO:Checking conflicts for patch: 5191377
INFO:Checking conflicts/supersets for patch: 5191377 with patch:5191377
INFO:
Running prerequisite checks...
INFO:Space Needed : 629324
INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 5191377
INFO:Prereq checkComponents failed. So, checkApplicable returning without execution.
INFO:Prerequisite check "CheckApplicable" failed.
The details are:
Patch 5191377: Required component(s) missing : [ oracle.sysman.repository.core, 10.2.0.1.0 ]
SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Thu May 29 17:34:04 IST 2008
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Thu May 29 17:34:04 IST 2008
INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3435)
INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
INFO:File "/U00010.00/Grid/db10g/.patch_storage/patch_unzip" cannot be deleted as it does not exist
~
~
~
~
~
"/U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log" [readonly] 38L, 2292C -
Error in the phase IMPORT_PROPER while applying support packages
Dear All,
I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
I have successfully applied the kernel patch and started applying the support packages, i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
========================================================================================================
START imp all SCD 20081229080538 DDIC sealcpro 20081229080537
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF SCD N not needed DDIC sealcpro 20081229080537
START tp_getprots SCD P 20081229080539 DDIC sealcpro 20081229080537
2EETP000 sap_dext called with msgnr "1":
2EETP000 db call info
2EETP000 function: db_setget
2EETP000 fcode: RT_SETB (65535)
2EETP000 tabname: TRBAT
2EETP000 len (char): 0
2EETP000 key:
2EETP000 retcode: 1
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 5319
STOP imp all SCD 0016 20081229080602 DDIC sealcpro 20081229080537
=========================================================================================================
And also when i look at the Support package import logs they show that
TEST IMPORT
Import ABAP Dictionary Objects and
ABAP Dictionary Activation phases ended with return code 4
But i dont think this can give any problem.
I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
I had to start SAP and only then i was able to connect to the SERVER again.
Can you please help me on this..
For any more information plz let me know
Thanks and regards
HunkyDear Balaji,
Thank you very much for the reply...
I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
===================================================================
DBIF_REPO_INTERNAL_ERROR
Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
An unspecified internal error occurred in the SAP-internal
database interface.
For further analysis the SAP system log should be examined
(transaction SM21).
Check the entries in the developer trace of the relevant work process
(transaction ST11).
Attempted to access component "LOAD" of program
"CX_SY_OPEN_SQL_DB=============CP ".
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_INTERNAL_ERROR" " "
"SAPLSTPA" or " "
==========================================================================
Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
So i request you to kindly help me on this as i am running out of time in delivering my server.
Waiting for all the valuble replies
Thank you in advance
Regards
Hunky -
Error while applying temporary license on ECC system ?
Hi all,
I tried to apply temporary license in my ECC 6.0 system as license was expired and i was not able to login in client 000 with sap* user so i tried for temp license at OS level but it throwed an error, when i used saplicense temp at command prompt at OS level an error occured. Please see the error text below.
Connect to database failed
DbSlConnect failed with return code 29
When i checked with R3trans it gave an error RC = 0012.
I checked the log file trans.log , given below is the log file details.
4 ETW000 R3trans version 6.14 (release 700 - 28.07.08 - 15:52:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 25.03.2009 - 17:01:00
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Mar 25 17:01:02 2009 3924 0.003924
4 ETW000 [dev trc ,00000] db_con_init called 43 0.003967
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 58 0.004025
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 45 0.004070
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 7925 0.011995
4 ETW000 [dev trc ,00000] using "S:\usr\sap\PE6\SYS\exe\uc\NTAMD64\dboraslib.dll"
4 ETW000 41 0.012036
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 15 0.012051
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 29 0.012080
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000 242 0.012322
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 26 0.012348
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 45 0.012393
4 ETW000 [dev trc ,00000] New connection 0 created 31 0.012424
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 48 0.012472
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 26 0.012498
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 25 0.012523
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 31 0.012554
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: dbs/ora/tnsname in profile missing
4 ETW000 178 0.012732
2EETW169 no connect possible: "DBMS = ORACLE --- ORACLE_SID = 'PE6'"
Please help me out, i need it urgently so please help me out.Hello Rahul,
1. which license expired:permanent license or temporary license?
2. can you post sqlnet.ora and tnsnames.ora files here
Rohit -
OPatch failed with error code 74 while apply patch 10093985 - 10352313
Hello,
In OBIEE 11g, we had a problem that the map only appear if the language selected is English. To fix this error we need to install de pach "10352313" who fix the bug "10093985". I make all the steps that are in the manual. Download the last OPatch, install and configured. All the prerequisites are ok. When I went to the folder of the patch to run the comand "opatch apply -jre $ORACLE_HOME/jdk/jre" I had this error:
$ opatch apply -jre $ORACLE_HOME/jdk/jre
Invoking OPatch 11.2.0.1.4
versão do Installer Temporário Oracle 11.2.0.1.4
Copyright (c) 2010, Oracle Corporation. Todos os direitos reservados.
Oracle Home : /oracle/Middleware/Oracle_BI1
Inventário Central: /home/oracle/oraInventory
de : /etc/oraInst.loc
Versão de OPatch : 11.2.0.1.4
Versão de OUI : 11.1.0.8.0
Localização de OUI : /oracle/Middleware/Oracle_BI1//oui
Localização do arquivo de log: /oracle/Middleware/Oracle_BI1/cfgtoollogs/opatch/opatch2011-02-15_07-08-59AM.log
Patch history file: /oracle/Middleware/Oracle_BI1/cfgtoollogs/opatch/opatch_history.txt
OPatch detects the Middleware Home as "/oracle/Middleware"
ApplySession aplicando o patch temporário '10093985' para OH '/oracle/Middleware/Oracle_BI1'
Running prerequisite checks...
Prerequisite check "CheckPatchApplicableOnCurrentPlatform" failed.
The details are:
Patch ( 10093985 ) is not applicable on current platform.
Platform ID needed is : 46
Platform IDs supported by patch are: 226
ApplySession falha durante as verificações de pré-requisitos: Prerequisite check "CheckPatchApplicableOnCurrentPlatform" failed.
Sistema intacto; o OPatch não tentará restaurar o sistema
OPatch failed with error code 74
I saw that the Platform ID needed is : 46 but the Platform IDs supported by patch are: 226. But this patch is for linux x86-64, and I didn't understand why it doesn't work. The machine is a Intel(R) Xeon(R) CPU 3050 @ 2.13GHz. Can anyone give a hand? Thanks for the help.Hello again,
To resolve this problem I did this steps:
1)./opatch lsinventory -invPtrLoc /oracle/Middleware/Oracle_BI1/OPatch/oraInst.loc
2)export PATH=$PATH:/oracle/Middleware/Oracle_BI1/OPatch/
3)export ORACLE_HOME=/oracle/Middleware/Oracle_BI1
4)export OPATCH_PLATFORM_ID=226
5)opatch apply -jre $ORACLE_HOME/jdk/jre
If anyone have any questions is just say!
Ty -
Opatch failed with error code 74 while applying patch 5191377
hi,
grid10g@appsnet6 5191377]$ opatch apply
Invoking OPatch 10.2.0.1.6
Oracle Interim Patch Installer version 10.2.0.1.6
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home : /U00010.00/Grid/db10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/db10g/oui
Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log
ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 5191377: Required component(s) missing : [ oracle.sysman.repository.core, 10.2.0.1.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74
Please help meehi,
Thanks for the replyy
here is the log
SEVERE:OPatch invoked as follows: 'apply '
INFO:
Oracle Home : /U00010.00/Grid/db10g
Central Inventory : /etc/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.1.6
OUI version : 10.2.0.1.0
OUI location : /U00010.00/Grid/db10g/oui
Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log
INFO:Starting ApplySession at Thu May 29 17:34:01 IST 2008
INFO:Starting Apply Session at Thu May 29 17:34:01 IST 2008
INFO:ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
INFO:Starting to apply patch to local system at Thu May 29 17:34:01 IST 2008
INFO:Start the Apply initScript at Thu May 29 17:34:01 IST 2008
INFO:Finish the Apply initScript at Thu May 29 17:34:01 IST 2008
INFO:Patch 5191377 has no conflicts/superset wiht any other patch processed till now
INFO:Checking conflicts for patch: 5191377
INFO:Checking conflicts/supersets for patch: 5191377 with patch:5191377
INFO:
Running prerequisite checks...
INFO:Space Needed : 629324
INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 5191377
INFO:Prereq checkComponents failed. So, checkApplicable returning without execution.
INFO:Prerequisite check "CheckApplicable" failed.
The details are:
Patch 5191377: Required component(s) missing : [ oracle.sysman.repository.core, 10.2.0.1.0 ]
SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Thu May 29 17:34:04 IST 2008
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Thu May 29 17:34:04 IST 2008
INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3435)
INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
INFO:File "/U00010.00/Grid/db10g/.patch_storage/patch_unzip" cannot be deleted as it does not exist
~
~
~
~
~
"/U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log" [readonly] 38L, 2292C
Regards,
Pradeep -
Error in Zreport while upgrading from 46C to ECC 6
Hello Experts,
I am facing problems in 1 Zreport while i have upgraded that report from 4.6C to ECC 6. Dump is reported while running the program.
Error is : "Access non-existent storage area."
error is coming @ line : ADD <f1> THEN <f2> UNTIL <f3> GIVING v_totval.
FIELD-SYMBOLS: <f1> TYPE ANY,
<f2> TYPE ANY,
<f3> TYPE ANY.
DATA: v_totval LIKE lfc1-um01h.
IF <f1> IS ASSIGNED AND
<f2> IS ASSIGNED AND
<f3> IS ASSIGNED.
ADD <f1> THEN <f2> UNTIL <f3> GIVING v_totval.
ENDIF.
can you ppl please tell me any solution as its urgent !
thanks in advance.this is fine for me.
DATA: BEGIN OF numbers,
one TYPE p VALUE 10,
two TYPE p VALUE 20,
three TYPE p VALUE 30,
four TYPE p VALUE 40,
five TYPE p VALUE 50,
END OF numbers,
sum TYPE i.
SELECT-OPTIONS position FOR sum.
ADD numbers-one THEN numbers-two
UNTIL numbers-five
ACCORDING TO position
GIVING sum.
A -
DDIC ACTIVATION very slow while applying SPS 7 to ECC 6.0
Hello SDN
I've been running this phase for at least 12 hours, is this normal ?
How can I make it go faster?
I have more patches to apply and I can't wait that long.
Any help is appreciated.
In my sm50 screen I see 2 background processes running :
SAPLSTPA with status On Hold and
RADMASDSC with status running and action sequential read of table DD03L
When I see the detail of RADMASDSC I see that it is running.
ThanksHi,
Since it is DDIC activation its not possible also to revert. I sincerely suggest you to overcome the problem without deleting the entry in the table. I haved faced the similar kind of issue in my experience and i resolved with the help of abaper. I suggest you to just get a help from abaper and creating the table field and flag the foreign key in the particular table. It will surely resolve your problem.
Incase if you want to dlete the entry in database table level emans. Use this functional module
Spam_reset _status in se37 and by forcefully you can delete the entry of the component. adn also please chck in table also pat01 pat02 and pat03..delete manually.
Hope it will resolve ur problem
Regadrs
Vijay kumar G -
Error in writing to file encountered while applying patch 9.2.0.8
Hi,
I encountered the error message below while applying Oracle 9.2.0.8 patch set using OUI on server running Oracle 9.2.0.7 and Windows 2003 Enterprise Edition SP2:
Error in writing to file 'C:\oracle\ora92\BIN\orapls9.dll'
[C:\oracle\ora92\BIN\orapls9.dll (he process cannot access
the file because it is being used by another process)]
I've already stopped the Oracle instance and services before invoking the setup.exe.
My question is: Why this is happening and what is the resolution to prevent this error from happening?I used the script in the Metalink note 454040.1 and chose 5. I typed in the orapls9.dll to see which module is locking this dll and I found out it is avrrepsvc.exe which is one of the services our application is running. I just stopped it in Services Console and run the setup.exe of the patch. The installaton of patch run successfully. I checked the version using 'select banner from v$version' and I now got this results:
SQL> select banner from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
PL/SQL Release 9.2.0.8.0 - Production
CORE 9.2.0.8.0 Production
TNS for 32-bit Windows: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
I have a related question. When checking from dba_registry, isn't it that versions of components should have been upgraded too? Please see below I what got:
SQL>SELECT SUBSTR(comp_id,1,15) comp_id, status, SUBSTR(version,1,10)
version, SUBSTR(comp_name,1,30) comp_name
FROM dba_registry ORDER BY 1;
COMP_ID STATUS VERSION COMP_NAME
CATALOG VALID 9.2.0.7.0 Oracle9i Catalog Views
CATJAVA VALID 9.2.0.7.0 Oracle9i Java Packages
CATPROC VALID 9.2.0.7.0 Oracle9i Packages and Types
CONTEXT VALID 9.2.0.7.0 Oracle Text
JAVAVM VALID 9.2.0.7.0 JServer JAVA Virtual Machine
ORDIM VALID 9.2.0.7.0 Oracle interMedia
OWM VALID 9.2.0.1.0 Oracle Workspace Manager
SDO VALID 9.2.0.7.0 Spatial
XDB VALID 9.2.0.7.0 Oracle XML Database
XML VALID 9.2.0.9.0 Oracle XDK for Java
10 rows selected.
What tasks did I missed int the steps?
ADDITION:
It looks like I forgot to run the catpatch.sql and utlrp.sql.
Edited by: user5470917 on Jun 19, 2009 2:52 PM -
TP_STEP_FAILURE " ERROR WHILE APPLYING SAP NW 04 SR1 ABA AND BASIS PATCHES
Hi Freinds!!
..I have completed cinst, dbinst, client copy, jinst, xinst installation for XI 3.0 INSTALLAION ON ABAP + JAVA.
I have first applied PI_BASIS patches and middle of it, it displayed the message that pre-requisite are not met i.e. First SAP_BW , SAP_BASIS, SAP_ABAP pathces needs to apply.
While applying SAP_BASIS and SAP_ABA patches... I'm getting the following error message ...
" The import was stopped, since an error occurred during the phase IMPORT_PROPER, which the Support Package Manger is unable to resolve without your input..
After you have corrected the cause of the erro, continue with the import by choosing Support
Package > Improt Queue from the initial screen of the Support Package Manager.
The following details help you to analyze the problem :
-Error in phase : IMPORT_PROPER
-Reason for Error : TP_STEP_FAILURE
-Return Code : 0012 "
....So, what could be the cause of the problem ? Do I need to increase table space through brtools command at ora<sid> ?!!
Pl. help....
Many thanks in advance...
-Rupen PatelThanks a lot everybody.
Although I had upgraded Kernel Patch Level from 43 to 155, the real cause was, it seems that was maxed out Oracle Table, ..as I found it through ST22 tr code which inturn displayed a logfile which displayed the details of error. I used brtools to extend the tablespace of a table, reapplied the patches thorugh SPAM and it worked out quite smoothly.
Thanks again and Regards,
-Rupen Patel -
Error while applying support packages
Hi,
I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW, the support package level was 02, I have downloaded 03,04,05,06 for all the above four components. While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
1.
Category: Abap programming error
Runtime error: call_function_parm_unknown
CX_SY_DYN_CALL_PARAM_NOT_FOUND
abap program: RSSPAM07
Function parameter "IV_IMP_SCENARIO" in unknown
this first error displayed after applying SPAM/SAINT update.
2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
The following details help you to analyse the problem:
Error in phase : IMPROT_PROPER
Reason for error:
Return code:
Error Message:
Please provide any solution as soon as possible....The details of SLOG
START CMDIMPORT NG1 L 20120227162812 SHABZ BasisTrn3 20120227162811973
STOP CMDIMPORT NG1 L 20120227162813 SHABZ BasisTrn3 20120227162811973
START imp all NG1 20120227162821 SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT NG1 H 20120227162822 SHABZ BasisTrn3 20120227162821661
STOP DD IMPORT NG1 H 20120227162839 SHABZ BasisTrn3 20120227162821661
START DD ACTIVATION NG1 A 20120227162839 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 J 20120227162839 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 J 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP DD ACTIVATION NG1 A 20120227162925 SHABZ BasisTrn3 20120227162821661
START DISTRIBUTION OF DD-O NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP DISTRIBUTION OF DD-O NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
INFO TBATG CONVERSION OF NG1 N not needed SHABZ BasisTrn3 20120227162821661
START MOVE NAMETABS NG1 6 20120227162929 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 P 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 P 20120227162935 SHABZ BasisTrn3 20120227162821661
STOP MOVE NAMETABS NG1 6 20120227162936 SHABZ BasisTrn3 20120227162821661
START MAIN IMPORT NG1 I 20120227162936 SHABZ BasisTrn3 20120227162821661
STOP MAIN IMPORT NG1 I 20120227163023 SHABZ BasisTrn3 20120227162821661
START TBATG CREATION OF EN NG1 n 20120227163024 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 Y 20120227163024 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 Y 20120227163034 SHABZ BasisTrn3 20120227162821661
STOP TBATG CREATION OF EN NG1 n 20120227163034 SHABZ BasisTrn3 20120227162821661
START EXECUTION OF REPORTS NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
STOP EXECUTION OF REPORTS NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0004 20120227163203 SHABZ BasisTrn3 20120227162821661
START CMDIMPORT NG1 L 20120227164418 SHABZ BasisTrn3 20120227164416991
STOP CMDIMPORT NG1 L 20120227164454 SHABZ BasisTrn3 20120227164416991
START DD IMPORT NG1 H 20120227165608 SHABZ BasisTrn3 20120227165607479
STOP DD IMPORT NG1 H 20120227170309 SHABZ BasisTrn3 20120227165607479
START DD ACTIVATION NG1 A 20120227170313 SHABZ BasisTrn3
START tp_getprots NG1 J 20120227170313 SHABZ BasisTrn3
STOP tp_getprots NG1 J 20120227171206 SHABZ BasisTrn3
STOP DD ACTIVATION NG1 A 20120227171206 SHABZ BasisTrn3
START imp all NG1 20120227171208 SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 S 20120227171303 SHABZ BasisTrn3 20120227171207614
STOP DISTRIBUTION OF DD-O NG1 S 20120227171304 SHABZ BasisTrn3 20120227171207614
START TBATG CONVERSION OF NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
STOP TBATG CONVERSION OF NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
START MOVE NAMETABS NG1 6 20120227171307 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 P 20120227171308 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 P 20120227171755 SHABZ BasisTrn3 20120227171207614
STOP MOVE NAMETABS NG1 6 20120227171755 SHABZ BasisTrn3 20120227171207614
START MAIN IMPORT NG1 I 20120227171756 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP MAIN IMPORT NG1 I 20120227195335 SHABZ BasisTrn3 20120227171207614
START TBATG CREATION OF EN NG1 n 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
START tp_getprots NG1 Y 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP tp_getprots NG1 Y 20120227195521 SHABZ BasisTrn3 20120227171207614
STOP TBATG CREATION OF EN NG1 n 20120227195521 SHABZ BasisTrn3 20120227171207614
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0903 20120227195522 SHABZ BasisTrn3 20120227171207614
Maybe you are looking for
-
How do I transfer purchases from older Apple ID to new Apple ID?
When I changed my email address, I created a new Apple ID with my new email address. Now, whenever I want to update any of the apps in my iPhone via iTunes it asks for my old Apple ID (which was the same as my old email address). I've since forgott
-
Hi Experts, Am pretty new to EDIFACT messages.Below are my issues. 1.When i drop the below file with segment ending 'CR, message is working fine. for this am using this EDFACT delimeter in pipeline 0x3A, 0x2B, 0x2C, 0x3F, 0x2A, 0x27, 0x0D, 0x0A Now
-
Work schema in another database?
I am creating data server and physical schema, one question is: Is it possible to set up work schema in another db instead of source/target dbs? from the set up drop down, I only can see the schema from current db, even I have db link. Since it is di
-
Upgraded to Lion without Knowing I would no longer be able to open my old Apple Works files. Is there a way to solve this problem.
-
After my iPot Touch 2 get a water damage i put it into rice. Now i can start my Ipod but then there comes a picture which says i should connect it to iTunes... I try this but my Itunes cant connect to my Ipod :S Itunes says : he cant conneect because