Error in inbound delivery replication ERP - EWM

Hi,
We have recently installed SAP ERP 6 EhP 6 and EWM 7.0 Ehp2 Add-On
Now, we are not being able to replicate Inbound Delivery from ERP to EWM.
As we save the ID in ERP we are getting a message that the ID has been distributed.
But the document is getting stuck in the RFC queue.
In SMQ2 the particular queue gets the status "SYSFAIL" with the error message "Function module does not exist or EXCEPTION raised. Message no. SY359"
The function module field contains "/SCWM/INB_DLV_SAVEREPLICA"
The status message says: "CREATE DATA: The document /1DF/_PDI000 is no... "
I've properly defined the standard BAPI destination and I've checked note 1398474.
Please help me get out of this mess.
Regards,
Oritra

Hi Oritra
As per my knowledge I haven't see this issue and table you are asking are not found as requirement in system without which delivery is able to replicate in EWM.
Also try to create new delivery in ECC and send... As you was checking in SMQ2 it means
"The status message says: "CREATE DATA: The document /1DF/_PDI000 is no..." it means after sending your delivery from ECC it is coming to back to the system where you are checking inbound queue and trying to create delivery.
That time it find NO range for delivery , so see number range assignment or number range maintenance and refusing to create delivery.
so update Number range and assignment properly for ID in EWM system and check new flow.
if resolved dont see below points.
please provide more infrmation of below error from SLG1. keep some extra selection time zone.
1. Do you have same or different client. As per above your description my understanding was same client (ECC and EWM).
If you have different client then your ECC WM parameter under EWM interface makes ur delivery move to EWM system with distribution model created with BAPI replica.
As I do not have ur system my second option will be try to check above setting and if not try to push in debug mode to see proper code.
As per my knowledge I haven't see this issue and table you are asking are not found as requirement in system without which delivery is able to replicate in EWM.
Regards
Suraj

Similar Messages

Inbound delivery replication ECC - EWM

Hello,
I am currently trying to link a SAP ECC 6.00 system to a SAP SCM5.00 in order to use eWM.
The RFC destinations are correctly customized and the master data is correctly replicated between the central and decentral system (via the CIF) => <i>I'm sure that the connection works between both systems</i>.
I have a problem with the replication of the inbound deliveries. When I check in SMQ2 the queue has been correctly created but the status of all queues is at 'SYSFAIL' with the following error message :
Function module does not exist or EXCEPTION raised
Message no. SY359
By double clicking on the Queue name I can clearly see that no function module has been determined for the LUW.
My questions are :
=> What function Module should have been determined ?
=> Where and how do I specify // customize this function module ?
Thanks for your help
BR
Hans

Dear Hans,
I am facing exactly the same problem, did you find a solution?
Kind regards,
Rainer
Message was edited by:
Rainer Kühnel

PPF: automatically Putaway WT creation after distribution of the inbound delivery from ERP

Dear Experts,
I'm trying to test the PPF in order to create a putaway WT for an inbound delivery in EWM-System directly after its distribution from the ERP-System.
1. I’ve chosen the action profile (PDI_01) and did an assignment to the doc type PDI
2. I’ve created the determination procedure to the action profile:
3. I’ve created a condition records:
After this I try to disribute an inbound delivery from ERP to EWM, but as after distribution as after saving of the inboun delivery nothing happens.
Could you, guys, give some hits, what I missed and where I should define the whrehouse process type for the putaway WT?
Thank you in advance
BR
Denis

Hi Petr,
thnaks for the help once again,
I did some settings you and Alex proposed and now I can see than my action will be found when creating Outbound Delivery Order:
But even I have only one condition record to my action "PDO_01_WT_CREATE" it will not be fulfilled...log says
I also changed the GM status to NSNS...can I somehow find out which conditiontion the programm is claiming about?
BR
Denis

Error during inbound delivery creation for some times not always

Hi,
I'm getting the following error when i'm trying to create an inbound delivery for PO.
                                                                                Diagnosis
The system attempted to find the reference movement type for
     the Warehouse Management system. A corresponding entry is
     missing in table 156S with the argument 101/X/X/ / /X/.
     The argument consists of:
     o   IM movement type
     o   Indicator: Value update
     o   Indicator: Quantity update
     o   Special stock
     o   Movement indicator
     o   Access indicator
     o   Indicator: Consumption
Can someone help me to resolve it? as it is not happening always
Appreciates everyone time and help.
Thanks and regards,
Siva

Hi,
Thanks for the response and yes i did maintained IM/WM mvt types for 101 in both places.
If the movement type is maintained well why SAP says it is not?
SPRO > LE > WM > Interfaces > IM > Define Movement Types - "Assign WM Movement Type References to IM Movement Types'
Related tabel is V_156S_WM
If you check your configuration you will see that there are many entries with 101, and there are several other parameters...
First you should check what you are doing in IM, what parameters that mvt has (qty, value update, special stock, etc) > after that you should check whether it is maintained well in WM customizing - see steps in my previous email.
Regards,
Csaba

Error during Inbound Delivery creation by Idoc DELVRY05

Hi,
We are trying to consolidate ASNs and creating an inbound delivery for the same. Thus we have more than one PO information in the idoc.
It processes fine and creates an inbound delivery if all the line item nos are different.
But the issue is, when there are articles which have the same line item no. even if the articles are different and they are on different POs. It gives the following errors.
1) "Delivery item cannot be exactly determined
Message no. HUFUNCTIONS313"
I tried to debug the above error and found that while packing it looks to the lips-vbeln/posnr & not the PO nr./PO item.
I am not sure if this could be handled by some config. Please advice.
2) "V51VP - item was not found - process cancelled
Message no. HUGENERAL056"
Any hints or comments on the above would be appreciated.
Thanks & Regards,
Akshay

Hi Raghavendra,
It has been a long time. But, as far as I can remember we had made coding adjustments in the customer-exit EXIT_SAPLV55K_004, include ZXTRKU12 to fetch the correct item and fill the idoc segment fields.
This resolved the issue.
Best Regards,
Akshay

Error during Inbound Delivery

Dear Expert,
I have problem when we want to create Inbound Delivery/VL31N. Error message is "No deliveries created (check log)". The long text of log is :
Diagnosis
                                                                                There is no item category available in item category
    determination in the delivery (table T184L) for the following
    entries: EL LEIS V
                                                                                System Response
                                                                                The system does not allow further processing of this item.
                                                                                Procedure
                                                                                Specify the appropriate item category for the above mentioned
    entries or inform your system administrator.
I confuse with this message, because i don't know the relation of table T184L with my case. the another Inbound delivery is working fine, only 1 inbound delivery that getting this error. Any solution and advice. Thx a lot
BR,
Affan

hi
go to t code 0184 and here against the entry EL LEIS V maintain item cat as norm and same manintain in ur material master
regards
kunal
award if helpful

Enter a Material or item catg error in Inbound delivery through idoc

Hi,
When Iam processing inbound delivery through Idocs, iam getting 2 kind of errors
1. Enter a material or item category
2. No item category exists (Table T184L EL 0002 V )
Iam thinking may be this is about not having an entry in T184L table. we have an item as ZTAS. can somebody let me know how to solve these errors.
Thanks,
Kashif

Hi Kashif,
You have to enter Material number in the sub-segment of E1EDP01 segment in WE19 transaction.
Rgds,
Kumar

Error in Inbound delivery using 'BAPI_INB_DELIVERY_CHANGE'

Hi,
I want to delete Inbound delivery.i got the erro that document cant be deleted(VL-66), how to correct this
I passed the belwo entry. let me know if i m missing anything.
I tried with and withou item_data and item_control(as i have commented) but no use.
i just want to delete the inbound delivery say evry thing be 0 so i was passing 0 as quantity
wa_inb_head-deliv_numb = '0180036237'.
    wa_inb_ctrl-deliv_numb = '0180036237'.
     wa_inb_ctrl-dlv_del    = 'X'.
      wa_inb_delivery             = '0180036237'.
wa_item_ctrl-DELIV_NUMB = '0180036237'.
wa_item_ctrl-CHG_DELQTY = 'X'.
append wa_item_ctrl to it_ctrl.
*wa_data-DELIV_NUMB = '0180036237'.
       wa_data-DLV_QTY = '0'.
*wa_data-DLV_QTY_IMUNIT = '0'.
*append wa_data to it_data.
     CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
          EXPORTING
            HEADER_DATA                = wa_inb_head
            HEADER_CONTROL             = wa_inb_ctrl
            DELIVERY                   = wa_inb_delivery
          TABLES
           item_data          = it_data
           item_control             = it_ctrl
           RETURN                     = it_bapiret2.

Please check the inbound delivery you are trying to delete is not having goods receipt status as 'completed' OR not having HANDLING UNITS assigned to it.
In any of the above case, please reverse the goods receipt first, then unassign the handling units and then try to delete the inbound delivery. In my opinion, there should be no need to change the qty to 0 and just delete the inbound delivery should work.
In case you still encounter an error, try deleting the delivery using VL32n and you should get a clear error/problem for your case.

Material and item category error in inbound delivery through IDOC

Hi,
When processing inbound delivery through idoc from we19, iam getting 2 errors:
1. Enter a material or an item category,
2. No item category exists (Table T184L EL ZCBN V )
can some please let me know how to solve this error.
Thanks,
Kashif

Hi Kashif,
You have to enter Material number in the sub-segment of E1EDP01 segment in WE19 transaction.
Rgds,
Kumar

PGR error at Inbound delivery

Hi Guys
I have one inbound delivery and When I do PGR
It is giving Error :PL Stock in transit exceeded by (10 quantity)
In good movemnet tab Movement type is 901
Please provide your suggestion
Thanks in advance
SAP MM

Hi,
Please check the stock for the material and batch if you use batch.
It seems the available stock is less.
Thanks,
Venkat

'Customer Not found' error during inbound delivery

Hi Experts,
During creation of inbound delivery(IBD) with transaction VL31N (against normal PO with doc. type NB), we are getting following error.
Customer not found
Message no. 8B519
Diagnosis
No entry found in KNA1.
Procedure
Please contact your system adiministrator
As per our understanding there should not be any connection for IBD & Customer master. Moreever we are getting this error for Only Brazil Plant. IBD works fine for India & Argentina plants.
Requested to provide any possible clues.
Regards
Manoj

Hi Manoj
This error messag should be realted to the Brazilian localization...
and th e problem reported should be in the table J_1BTVAKV, If you don't need a Nota Fiscal in the step of process, you should not assign the Nota Fiscal type to sales doc type .
Please correct your configuration and perform a new test.
Regards,
Mauro

Error in Inbound delivery monitor (VL06i)

Dear Friends,
I am getting error in vl06i, when i do partial GR for inbound deliveries.
The error is
Item 000110 does not exist
*Material is not the same confirmation and delivery.
Is the first error is because the particular item is not confirmed for GR, but exists in delivery.
Is the second error because the confirmation quantity is less than the GR quantity.
Kindly Help.
Thank you
Prabhu

When you do Partial GR, System will compare the IBD Qty first & the difference thrown as Shipping notification.
SN qty will hang in the middle as unknown qty.
To clear this error, first clear SN qty by matching GR & IBD qty. then proceed doing GR.

ME006 error during Inbound Delivery Confirmation VL06I

Hi, to all..
We are trying of post multiple goods reciepts (same PO) for Inbound Deliveries with trx VL06I
When we push the botton, we get next error:
ME006 User && is already using PO &&
In some cases just the first InbDel is confirmated, other times, 2 or 3 ID are confirmated buy they are NO consecutives .
We think software in Support Package 17 has some bug, but we had not been able of find any SAP Note to correct this problem (think about ENQUEUE_EMEKKOE/DEQUEUE_EMEKKOE functions)
We have checked also trx SM12 and NO blocking appears ther...
I'll appreciate any help in this issue.
Best Regards..
TMoreno

Hello,
I manage to check the message ME006 in IDES and it is standard SAP message.
I have one question, why is user who is doing the goods reciept for the inbound deliveries associated with single purchase order opening the same purchase order in change mode at the time of goods reciept
This message ME006 only appears if your user has opened the purcahse order in chnage mode, during the goods reciept process with VL06I.
This is also true when user XYZ has opened the purchase order in chnage mode (ME22N) and user ABC is doing the goods reciept for the same purchase order.
I suggest that you do not open the purchase order in change during goods reciept.
I hope this helps
Br,
Tushar
Edited by: Tushar Patankar on Jan 11, 2011 3:33 PM
Edited by: Tushar Patankar on Jan 11, 2011 3:38 PM

Error in Inbound Delivery

Dear All,
Please find the error below when i maintain output type in VL32N
Maintain outgoing EDI-connection data for partner 2000069677
    Message no. VN032
Diagnosis
    The system could not locate the EDI partner agreements (outbound) for
    partner 2000069677.
System Response
    You cannot use transmission medium 'EDI' with this partner.
Procedure
    Maintain the EDI partner agreements for partner 2000069677. Make sure
    create entries for output control as well as for outbound parameters.
Please advice how to proceed further.
Regards

Hi,
Please check the below links
Purchase order distrubution using EDI
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=221612083
Regards,
Divya

Error while activating Inbound Delivery Notification

Hi,
I have created and Inbound delivery in ERP, the material is batch managed and packed with HU. Once saved on ERP system, I find the Inbound Delivery Notification in SCM EWM system with HU, material and batch number appearing. Up to this point all good.
However, when I am trying to hit the button 'Activate' so that I can create Inbound delivery, system comes up with error message - 'Please specify an external number range' (message NR753) I have no idea where it's coming from.
For further information - I am using standard Doc Type INB with Doc Cat. PDI and it's assigned with an Internal Number Range.
What's missing?
I help will be rewarded.
Thanks,
Amit

Thanks Virendra,
You have pointed to the right direction. Basically, without checking for the posts here, which are really helpful, I went to system one more time only to find that I have made a configuration error. I am just sharing if anyone else in future faces same situation, he/she can be benefited out of it.
In EWM system - I had created number range with transaction SNRO for object /SCWM/SSCC putting 01 (from 1 - 1999999) as internal and 02 (from 2000000 - 2999999) as external number range.
In EWM system - I had assigned the number range in following place:
Extended Warehouse Management > Cross Process Settings > Handling Units > External Identification > SSCC Generation Acc. to EAN128 > Maintain SSCC Generation for Each Warehouse Number
In ERP system - I had created number range with SNRO for object LE_SSCC with same attributes as above. i.e. 01 as internal and 02 as external.
Now when I packed the inbound delivery in ERP system, I used packaging material for which the number range is internal (i.e. 01) and it created HU with SSCC number. Up to this all were good. But when the same HU transferred from ERP to EWM system, SAP treated the HU number coming from ERP system as external HU number (which is logical) but it was looking at number range 02 (since it was marked as external) but was failing to match as the allowed numbers doesn't fit along with the number transferred from ERP system. Hence it was giving error.
As a solution I declared 01 as external and 02 as internal and also inverted the number range assignment for SSCC generation in EWM system.
It created Inbound Delivery successfully.
Thanks all of you for helping on it.
Cheers,
Amit

Error in inbound delivery replication ERP - EWM

Similar Messages

Maybe you are looking for