Error in Info Package running.

Hello Experts,
When I am running a info package of data source 0Employee_Attr , request becomes red after some time and it gives a message at monitor screen on detail tab that:
"Error occurred in the data selection" .
How could I resolve it.
with regards,

Avenai - wrong forum for this. This would be better placed in the Extractors forum.

Similar Messages

Process Chain error during info package execution

I'm trying to load master data into 0CURTYPE using process chain.
I have created a start process and included the info package and corresponding DTP in the chain to load master data into the info object.
On scheduling the process chain I get an error during the execution of the info package
"Could not find code page for receiving system
For the logical destination Q4900CL010, you want to determine the code page in which the data is sent with RFC. However, this is not currently possibe, and the IDoc cannot yet be dispatched."
Is it relatred to some setting whihc I have missed out?
Any help on this please?
Thanks,

Hi, this is a issue related to idocs in the source....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
this issue belongs to source...
They have to run a report:RBDAGAIN to process the errore idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
if this occurs regularly they have to change the settings in SM59..
refer exact note for this: 784381
rgds,

Errors in info package

hi friends,
please some one can explain me the errors occurs in info package like referential integrity failures, due to locks, etc.
please some one explain about this points.
thanks in advance.

Hi sreekanth,
Referential Integrity: Its a DataBase concept which combines(logically) the data of multiple table with the master table. Here master table has the primary key and rest of the tables have the same key as forienkey.
Here we use the characteristic (or combinations of Chars) call as referential char.
check this.
you might be knowing that generally refrential integrity is concerned with nothing but primary key and foriegn key relationship. Generally we use to check uniqueness of records.
In sap we use it during flexible updation...to check the data records of transaction data and master data.
In other words, to check before loading of data, that whether loading will be properly or not.
we will check(tick) the option in the maintainance of the
infosource--> communication structure
it will be better if you clearly mention your problem, if further help is needed.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/14c43bb7137503e10000000a11402f/content.htm
Referential integrity is the property that guarantees that values from one column depend on values from another column.This property is enforced through integrity costraints....
see this link...
http://help.sap.com/saphelp_nw2004s/helpdata/en/6d/117c5fd14811d2a97400a0c9449261/content.htm
Please find the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=referential%20integrity&cat=sdn_all.
Enble the referential integrity at Communication structure***
Locking Errors:
1.These Locking error are due to If Some body using same Infopak when ur using that same Infopak.This is Not a major problem.
2. If any Request has lock u can Unlock that by using se03.
***Assign Points If Helpful****
Thanks,
kiran.

Error with SSIS package running as SQL Agent job

I have a strange issue.
I have a SQL Agent job that execute 5 steps, each step is an SSIS package that imports a CSV file to a temp table, then executes a SQL script to update a production table.
This job runs every 3 mins, every day, and has been for over a year.
Every once in a while it will start failing on step 2. Sometime it only happens for a couple of runs, other times I have to restart the SQL server. Once it corrects itself, it could be months before it happens again, but usually happens every
few weeks.
The error in the job history is: "Unable to bulk copy data. You may need to run this package as an administrator"
Obviously I have all the permissions correct, as it was running successfully every 3 mins before this error suddenly starts. I'm at a loss as to what the problem is. It is always on step 2, which is identical to step 1 except its a different CSV file
going to a different table. As I typed this, it failed twice, then was successful afterwards.
Any ideas where to look for further information? I've checked the event viewer and looked in the SQL logs, nothing stands out at this time.

Hi Kerberos35,
It seems to be caused by the UAC feature which makes SSIS use the low-permissions token of the administrator Windows account under which the job runs. This issue is described in the following KB article:
http://support.microsoft.com/kb/2216489/en-us
To resolve the issue, you can install the latest service pack for your SQL Server. To work around this issue, you can also use one of the following two methods:
Method 1: Replace the SQL Server Destination components in the Data Flow Tasks that are failing with OLE DB Destination components that point to the same SQL Server connection manager.
Method 2: Create a SQL Server Agent proxy by using a Windows account that is not a member of the local Administrators group after you assign Create Global Objects permissions to that account.
To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Local Security Policy.
Expand Local Policies, and then click User Rights Assignment.
In the details pane, double-click Create global objects.
In the Local Security Policy Setting dialog box, click Add.
In the Select Users or Group dialog box, click the user accounts that you want to add, click Add, and then click OK two times.
Regards,
Mike Yin
TechNet Community Support

Error in Info Package - NOT able to be used as loading variant

Hii All
I develop a process chain where I extract data from ODS to Cube. Now I am getting an error. A info pkg for extracting data from ODS to Cube giving error message of InfoPackage ZPAK_XXX is generated; NOT able to be used as loading variant.
I am not able to understand why this error is coming ??
Plz tell me how to resolve it ??
I searched some documents but not cleared.
Thanks in advance
Neha

Hi
Create a new infopackage and try loading.
You can also refer to
[Full load ODS to ODS in a Process chain;
[Process chain;

Error in Info Package

Hi Experts,
Yes, i have one column 'unit' is blank. meaning no value in that column. how can i flag this error off? where shall i set?
"Error in conversion exit
CONVERSION_EXIT_CUNIT_INPUT"
It seems i only have this error when i upload my file to the app. server and load thru the process chain.
i dont encounter this error if i load my file from my local C drive, and without using the process chain.
Why is it happen like this and why is it work differently whereas my file values remain the same?

Hi,
this error will occur when the file format is not matching to data source structure. check do you have all file permissions in your app.server(like read, write and delete). are you doing any changes to your flat file before loading data to BIW. if yes after changes dont open the file in excel and do not do any other changes if you do other changes the previous changes will not work. so make sure about the changes and check the file format with data source.
Regards
Sankar

Error in Info package using BI 7, nw2004s

Hi BW Gurus,
I had problem in creating Infopackage. Error messages are:
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted
please help is solving this.
Ravi

have you checked we02 or bd87 for IDOC Types in error status? (like Basic Type RSREQUST)
please also checkout SM58 for tRFC errors
Edited by: Nesimi Buelbuel on Nov 4, 2008 6:00 PM

Error while creating Info Package

Hi,
I am new to SAP-BW .Could anyone help me in fixing the following error .
I have created an Info source for characteristic data and then trying to create a Infopackage to load master data , I have used the characteristic Material Number(IO-MAT) in this case .
When creating the Info Package I got two data sources in the pop up , Material number (Master data)IO_MAT_ATTR and Material number (Texts) IO_MAT_TEXT .
I was able to load data from a flat file into Data Source Material Number (Master data) But when I was trying to follow the same procedure and load the data for 'Material number(Texts) IO_MAT_TEXT' it gives me the following error .
Select the Language field in the source system -> Long Text
I am not able to figure out and proceed further. Pls help me out.
Regards
Sudha

I have another question..I was able to fix the error regarding info package but unable to load the data..(data load is being failed)
In the DataSource/Transfer Structure I have LANGU , /BIC/ZB4_MAT (Material Number infoobject which i created) and TXTSH Fields ..
the flat file which i used has Language, MaterialNumber,description pattern alone..
(eg . E , M001,cookie ) and when i try to load this data..and check in the Monitor - Administration Workbench..it shows as unsuccessful..
The following error msg :
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
I could'nt see the long text of Help information...
could you help me out in figuring out this..
Points assigned for previous answer..
Regards
Sudha

Info Package load 'Time Lag'

Hi Experts,
Is there a table which holds information about time lag of a info package run.
If yes which field of dat table gives this information ?
If there is no direct method, is there a indirect method to derive it from any table.
I badly need to get it from a table, coz I need to document this for lot of info packages, and if I do it manually it takes lot of efforts (going to "details" tab of every info package run and all dat stuff..)
Points would be awarded for sure.
Thanks,
Mihir

Hi Mihir,
Check table: RSMONICTAB -- Monitor, Data Targets(Infocube/ODS) Table, request related info and
RSMONIPTAB -- InfoPackage for the monitor
and also you will get load details from statistics.
More info at: [BW Useful Tables|http://sapbwneelam.blogspot.com/2007/08/bw-useful-tables.html]
Hope it Helps
Srini

SSIS 2012 package runs under SSDT but fails with permission error from SSMS

I have a simple package that pulls data from a text file located on a Windows file server that runs successfully from SSDT on my client.
However, when deployed and running the package via SSMS from the client, the package fails with a permission error, with the error stating that the data file could not be opened.
I have done some investigation and have seen some info that states that a package run from SSMS runs under the account on which you are logged on to the machine, which I would have thought is correct. This is therefore the same account when running from
SSDT (which works) and I can see from the SSIS Report that the 'Caller' is stated as my account, so if this is the case why isin't the package working.
I've also seen an MSDN forum answer which stated the opposite that the package when run from the IS Catalog in SSMS doesn't run under the account on which the client is logged on with, which is the opposite of the above, but doesn't indicate which account
it is using.
So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?
If it is the account on which you are logged onto the client running SSMS, why is it not working when the account has the necessary permissions (as provent when running from SSDT) ?

I am aware it's using my account and not one of the service. There's nothing in the posts above which suggests I'm using the service account. I don't know why people keep assuming that I'm running the package from a job. I've never stated that in any of
the posts I'm running the package from a job. It's been made quite clear I'm running the package from the IS Catalog on SSMS:
"This is simply selecting a package from the IS Catalog, right-clicking and selecting Execute package.", as per the Nov 18 post, and in the original post "....So what account is being used to run SSIS 2012 packages from the IS catalog from
within SSMS".
Just to be clear, the package is NOT being run from a job. It's using the Execute package option when selecting the package within SSMS from the IS Catalog and it's running under the account on which I am logged on to my client.
Please read carefully. I was just answering your question "So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?" and stating that you where right and that it uses your account to run the package
when you execute a package manually from the Catalog and that you can prove that by logging the system variable.
A good suggestion about using a share in the task to map the drive and I will try this. I would find it strange that SSMS requires this mapping whereas SSDT does not though.
Ok let us know your findings. If it doesn't work you can also test it with a password and username:
net use f: \\financial\public yourpassword /user:username
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Error while transporting PCs and Info packages frm dev to qa

Hello Guyz
First of all, I am new to this forum. Heard a lot about it, and I hope I can learn a lot by the exchange of information in this forum. I ve already gone through so many threads, and have gained a lot of insight in BW.
I have an issue, where I am transporting process chains and info packages from dev to qa. But the transports have thrown errors, saying that the 'Source System XXXCLNTXXX does not exist and info package has been deleted'.
My question: How can I transport these objects in such a way that the loads which were going from ECCDEV to BWDEV, now go from ECCQA to BWQA? Are there any settings in SE09 or SE10 or somewhere in BW where I can do this?
Thanks in advance.
Atul.

Hi Atul........
There is no such settings........check this.......
How to transport BW object
Anyways.....I think there is some problem in the Client name.......Just check the Source system name in RSA1...........if it has been changed somehow........then run transaction BDLS and change the source system assignment........
Regards,
Debjani......

Dump Error while Creating the Info Package

Hi,
I have created Customized ODS and used Generic data sources.I have loaded full Upload to ODS. Created Info Packages for Init delta and Delta for delta loading. I have ran Full Upload and while I am trying to run Init, I am getting the error.
While I am trying to open the Info Package, I am getting Dump error message.
Dump error Message :
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
While i am trying to Create New Info Package, the systems gives the Dump on the System
Please help on this issue.
Thanks,
Siva.

Hi,
Actually, when we want to have delta loads in future, then we can just have one infopackage with init delta infopackage, so that when it runs for the first time, it pulls all the records and from next time onwards it will pull the delta records only.
But as you have done the full load with infopackage, now just create a delta infopackage, no need of init delta infopackage, this is the reason, its giving dump.
Hope it has given some insight.

Error in Scheduling INIT Info package

Hi All,
We have a standard extractor in CRM which we have replicated to our BW system. We also had transfer rules ready as a part of the BI content, but were present as 3.x data flows. So, we migrated the 3.x data flow to 7 successfully and finally created an INIT info package since the data source was meant for delta extraction. Now, when i schedule my INIT info package, i get an error saying that "Job was terminated in the source system". I also traced this issue in the source system and i found that there was a run time error which says
Runtime error - OBJECTS_OBJREF_NOT_ASSIGNED_NO
"An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "CRM_BW_CMG_LINKS_INIT" "(FUNCTION)", nor was it propagated by a RAISING clause.
Either the reference was never set or it was set to 'NULL' using the CLEAR statement."
Can anybody help me out with this? What shud i do now?

Hi Sandeep,
Thanks for the useful pointer. Can u throw some more light on this? What exactly does it mean when you say, "Replication of the connection object"? Does it refer to the replication of the Data source or is it something else?

Error while monitoring the Info Package

Hi,
While monitoring the info package, I'm having the following errors:(The data source is of type standard R3 Datasource).
" Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. "
pls help me in this...
With regards,
Yokesh.

Hi Yokesh,
Try these to solve your issue,
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
OR
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Hope it helps
Regards,
Arun.M.D

Version error while creating info package of data source 0fi_gl_10

Dear Friends,
I have replicated the data source 0fi_gl_10 into sap bw but while creating info package i am getting error " The DataSource 0FI_GL_10(E01CLNT200) does not exist in object version A". IS the manual activation always should be done for that ?
Regards
Nilesh

Hi,
Please check if the veriosn of DataSource is A or not. Sometimes it shows as active but if you open the datasource then it might be in modified version only. Do activate it manually, it will serve your purpose to create a infopackge.
Regards,
Anjum.

Error in Info Package running.

Similar Messages

Maybe you are looking for