Error in Info Package
Hi Experts,
Yes, i have one column 'unit' is blank. meaning no value in that column. how can i flag this error off? where shall i set?
"Error in conversion exit
CONVERSION_EXIT_CUNIT_INPUT"
It seems i only have this error when i upload my file to the app. server and load thru the process chain.
i dont encounter this error if i load my file from my local C drive, and without using the process chain.
Why is it happen like this and why is it work differently whereas my file values remain the same?
Hi,
this error will occur when the file format is not matching to data source structure. check do you have all file permissions in your app.server(like read, write and delete). are you doing any changes to your flat file before loading data to BIW. if yes after changes dont open the file in excel and do not do any other changes if you do other changes the previous changes will not work. so make sure about the changes and check the file format with data source.
Regards
Sankar
Similar Messages
-
hi friends,
please some one can explain me the errors occurs in info package like referential integrity failures, due to locks, etc.
please some one explain about this points.
thanks in advance.Hi sreekanth,
Referential Integrity: Its a DataBase concept which combines(logically) the data of multiple table with the master table. Here master table has the primary key and rest of the tables have the same key as forienkey.
Here we use the characteristic (or combinations of Chars) call as referential char.
check this.
you might be knowing that generally refrential integrity is concerned with nothing but primary key and foriegn key relationship. Generally we use to check uniqueness of records.
In sap we use it during flexible updation...to check the data records of transaction data and master data.
In other words, to check before loading of data, that whether loading will be properly or not.
we will check(tick) the option in the maintainance of the
infosource--> communication structure
it will be better if you clearly mention your problem, if further help is needed.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/14c43bb7137503e10000000a11402f/content.htm
Referential integrity is the property that guarantees that values from one column depend on values from another column.This property is enforced through integrity costraints....
see this link...
http://help.sap.com/saphelp_nw2004s/helpdata/en/6d/117c5fd14811d2a97400a0c9449261/content.htm
Please find the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=referential%20integrity&cat=sdn_all.
Enble the referential integrity at Communication structure***
Locking Errors:
1.These Locking error are due to If Some body using same Infopak when ur using that same Infopak.This is Not a major problem.
2. If any Request has lock u can Unlock that by using se03.
***Assign Points If Helpful****
Thanks,
kiran. -
Error in Info Package running.
Hello Experts,
When I am running a info package of data source 0Employee_Attr , request becomes red after some time and it gives a message at monitor screen on detail tab that:
"Error occurred in the data selection" .
How could I resolve it.
with regards,Avenai - wrong forum for this. This would be better placed in the Extractors forum.
-
Process Chain error during info package execution
I'm trying to load master data into 0CURTYPE using process chain.
I have created a start process and included the info package and corresponding DTP in the chain to load master data into the info object.
On scheduling the process chain I get an error during the execution of the info package
"Could not find code page for receiving system
For the logical destination Q4900CL010, you want to determine the code page in which the data is sent with RFC. However, this is not currently possibe, and the IDoc cannot yet be dispatched."
Is it relatred to some setting whihc I have missed out?
Any help on this please?
Thanks,Hi, this is a issue related to idocs in the source....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
this issue belongs to source...
They have to run a report:RBDAGAIN to process the errore idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
if this occurs regularly they have to change the settings in SM59..
refer exact note for this: 784381
rgds, -
Error in Info Package - NOT able to be used as loading variant
Hii All
I develop a process chain where I extract data from ODS to Cube. Now I am getting an error. A info pkg for extracting data from ODS to Cube giving error message of InfoPackage ZPAK_XXX is generated; NOT able to be used as loading variant.
I am not able to understand why this error is coming ??
Plz tell me how to resolve it ??
I searched some documents but not cleared.
Thanks in advance
NehaHi
Create a new infopackage and try loading.
You can also refer to
[Full load ODS to ODS in a Process chain;
[Process chain; -
Error in Info package using BI 7, nw2004s
Hi BW Gurus,
I had problem in creating Infopackage. Error messages are:
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted
please help is solving this.
Ravihave you checked we02 or bd87 for IDOC Types in error status? (like Basic Type RSREQUST)
please also checkout SM58 for tRFC errors
Edited by: Nesimi Buelbuel on Nov 4, 2008 6:00 PM -
Error while creating Info Package
Hi,
I am new to SAP-BW .Could anyone help me in fixing the following error .
I have created an Info source for characteristic data and then trying to create a Infopackage to load master data , I have used the characteristic Material Number(IO-MAT) in this case .
When creating the Info Package I got two data sources in the pop up , Material number (Master data)IO_MAT_ATTR and Material number (Texts) IO_MAT_TEXT .
I was able to load data from a flat file into Data Source Material Number (Master data) But when I was trying to follow the same procedure and load the data for 'Material number(Texts) IO_MAT_TEXT' it gives me the following error .
Select the Language field in the source system -> Long Text
I am not able to figure out and proceed further. Pls help me out.
Regards
SudhaI have another question..I was able to fix the error regarding info package but unable to load the data..(data load is being failed)
In the DataSource/Transfer Structure I have LANGU , /BIC/ZB4_MAT (Material Number infoobject which i created) and TXTSH Fields ..
the flat file which i used has Language, MaterialNumber,description pattern alone..
(eg . E , M001,cookie ) and when i try to load this data..and check in the Monitor - Administration Workbench..it shows as unsuccessful..
The following error msg :
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
I could'nt see the long text of Help information...
could you help me out in figuring out this..
Points assigned for previous answer..
Regards
Sudha -
Version error while creating info package of data source 0fi_gl_10
Dear Friends,
I have replicated the data source 0fi_gl_10 into sap bw but while creating info package i am getting error " The DataSource 0FI_GL_10(E01CLNT200) does not exist in object version A". IS the manual activation always should be done for that ?
Regards
NileshHi,
Please check if the veriosn of DataSource is A or not. Sometimes it shows as active but if you open the datasource then it might be in modified version only. Do activate it manually, it will serve your purpose to create a infopackge.
Regards,
Anjum. -
Dump error while creating or double click the info package
Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
SteveHere are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks. -
Error while transporting PCs and Info packages frm dev to qa
Hello Guyz
First of all, I am new to this forum. Heard a lot about it, and I hope I can learn a lot by the exchange of information in this forum. I ve already gone through so many threads, and have gained a lot of insight in BW.
I have an issue, where I am transporting process chains and info packages from dev to qa. But the transports have thrown errors, saying that the 'Source System XXXCLNTXXX does not exist and info package has been deleted'.
My question: How can I transport these objects in such a way that the loads which were going from ECCDEV to BWDEV, now go from ECCQA to BWQA? Are there any settings in SE09 or SE10 or somewhere in BW where I can do this?
Thanks in advance.
Atul.Hi Atul........
There is no such settings........check this.......
How to transport BW object
Anyways.....I think there is some problem in the Client name.......Just check the Source system name in RSA1...........if it has been changed somehow........then run transaction BDLS and change the source system assignment........
Regards,
Debjani...... -
Dump Error while Creating the Info Package
Hi,
I have created Customized ODS and used Generic data sources.I have loaded full Upload to ODS. Created Info Packages for Init delta and Delta for delta loading. I have ran Full Upload and while I am trying to run Init, I am getting the error.
While I am trying to open the Info Package, I am getting Dump error message.
Dump error Message :
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
While i am trying to Create New Info Package, the systems gives the Dump on the System
Please help on this issue.
Thanks,
Siva.Hi,
Actually, when we want to have delta loads in future, then we can just have one infopackage with init delta infopackage, so that when it runs for the first time, it pulls all the records and from next time onwards it will pull the delta records only.
But as you have done the full load with infopackage, now just create a delta infopackage, no need of init delta infopackage, this is the reason, its giving dump.
Hope it has given some insight. -
Error in Scheduling INIT Info package
Hi All,
We have a standard extractor in CRM which we have replicated to our BW system. We also had transfer rules ready as a part of the BI content, but were present as 3.x data flows. So, we migrated the 3.x data flow to 7 successfully and finally created an INIT info package since the data source was meant for delta extraction. Now, when i schedule my INIT info package, i get an error saying that "Job was terminated in the source system". I also traced this issue in the source system and i found that there was a run time error which says
Runtime error - OBJECTS_OBJREF_NOT_ASSIGNED_NO
"An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "CRM_BW_CMG_LINKS_INIT" "(FUNCTION)", nor was it propagated by a RAISING clause.
Either the reference was never set or it was set to 'NULL' using the CLEAR statement."
Can anybody help me out with this? What shud i do now?Hi Sandeep,
Thanks for the useful pointer. Can u throw some more light on this? What exactly does it mean when you say, "Replication of the connection object"? Does it refer to the replication of the Data source or is it something else? -
Error Handling in info-package strangely doesn't work
Dear All,
I'm trying to load master-data from R3 containing time-dependent attributes which, I know, are sometimes overlapping. As I still want to load the correct part of data, i've set Processing - via PSA and Error Handling - "Updating valid records, reporting possible" with number of errors more than the dataset itself. However, the load still fails and what is more interesting, all records in PSA are marked as "green" whereas the errors are reported in a log.
And what makes me wonder even more is that the same info-package from the same DS is loaded in a test system OK - with errors handled and "trashed" in PSA and remaining updated in Info-Object MD.
Does anybody can help to resolve this strange problem as i can't honestly see the difference in global settings of test and productive systems that could allow this...
Thank you in advanceHi,
Here you are extracting data for master data with one of the attribute as time dependent . So there are two more fileds are neccessary in extraction ,i.e, 'from date' and 'to date'.
And it seems there is overlapping of this range for two records. Make sure it in PSA with record numbers. And make sure there will be no overlapping.
With rgds,
Anil Kumar Sharma .P -
Error handling in Info Package
Hi,
I am flexibly loading master data into an Info Object (0DPM_DCAS) Info Provider.The delta loads occur on a daily basis.It is fed from two data sources serially in a process chain.
My concerns are regarding load failures.
What ideally should be the "Error handling" setting in the info package? "No update,no report / Valid update,request red / Valid update,request green"? What might be the implications of each on a long term basis?
Also, if a delta load fails from one of the data sources do I need to set the QM status manually to green to make the subsequent loads go through? If so how do I obtain the data for the failed request?
How safe is it to manually change the QM status?Hi Avishek,
The Error handling mechanism works whenyou load to PSA and subsequently update the data target (InfoObject in your case). This is provided for in cases where you know that there is some junk data that will be extracted, and this can cause a load to fail in BW. Eg. you are loading around 90,000 material values and even if one has an extra char, the whole load will fail. To prevent this, you can use error handling. In Valid update,request red the correct records are updated and incorrect are left behind, but the data is not released for reporting. Using the Valid update,request green option, the correct records are updated and are also available for reporting. You can later edit the incorrect records (stored in PSA as a separate request) and update them to the data target.
If a load fails, never set it to green else you will miss out on the next delta. Always make sure that it is red and then delete it or request the next delta. Changing the QM status is quite commonly done, but it is important to be very careful.
Hope this helps... -
Error while monitoring the Info Package
Hi,
While monitoring the info package, I'm having the following errors:(The data source is of type standard R3 Datasource).
" Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. "
pls help me in this...
With regards,
Yokesh.Hi Yokesh,
Try these to solve your issue,
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
OR
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Hope it helps
Regards,
Arun.M.D
Maybe you are looking for
-
How do I create an internal link in a pages document?
I can do external link ok (Hyerlink + enter web address) - but cant find way to link to a page within the document - an internal link. Thanks for your genius. Nick
-
Group by colum wise data in adobe form
Hi, I have a requirement to print data in adobe form thru webdynpro for abap. example; i have a table data getting from webdynpro like below. date empno activity. 11-11-2008 p101 x1. 11-11-2008 p101 x2. 11-11-200
-
Airport Express multiple base detection
I have updated the firmware and Itunes now gives me the option of checking the speaker boxes. Every time I check the additional AP Express base it cuts the other one off. What am I doing wrong? Also I have to choose to either use an AP express base o
-
How to use spring context in sca
hi can anyone tell me how to use the spring context in bpel and how the functionality of spring context in service composite architecture(sca)
-
I want to transfer music from laptop to iphone. Not able to see any summary tab in itunes