Error in Infocube Data

Hi Gurus,
I am trying to see data in a cube in one field. It should show date but it is showing some figure.
Any idea why its happening and how can I fix that?
Regards

Work backward from the InfoCube to the PSA and find out if the data is coming with that value into the PSA via the extractor. Once you find the source, you can have the business correct the data at the source or create a routine to cleanse the data. It would behoove you to have the data corrected at the source, because not only will it resolve your issue, your end customers will not be able to transact on that record if the data isn't in the prescribed format.

Similar Messages

Error While Transferring Data rom PSA to Infocube

Hi Experts,
                 We are Loading Data from (2LIS_11_VAHDR ) From source system .
1. Data Transferred to PSA .
2. Transformation is activated.(mapping based on RSOSFIELDMAP table for transfomation)
3. While Executing DTP we are following Error Messages ,
* R7105 - The Object Name is not allowed to be Empty.
                   * RSBK241 - Error while updating to target OSD_CO3.
                   * RSBK229 - Data Package processing terminated.
Note: Even though we are getting error messages the data is transferred to infocube
We Need a Solution for Error ?
Thanks,
All.

Hi,
I am also got the same problem long back but i can not remeber exactly but that is problem with transformations in the form of may be for some key figures taht currency units not updating
or some of the fileds to info object transformations , check once again that data element and length of fields and info objects and activate once again, or just delete existed DTP , create new DTP between DS and Info cube and try to load.
Thanks & Regards,
Sathish

Error while loading data from DSO to Infocube for 0Fiscvarnt

Hi All,
Could you please help me any one to resolve the below error.
*"Fixed value discrepancy with InfoObject 0FISCVARNT value 'K4 ', expected 'K2 " (MessageClass RSAU).
We have two Staging DSO's upto Second level DSO FiscalyearVariant both K2 and K4 updating, but second level DSO to infocube data loading we had a above problem. all are direct mapping, no routiunes or constants at all transformation level.
But we checked R/3 side both K2 and K4 variants are available.
Thanks,
Ramesh

Hi,
It's a constant issue I met before. I guess you have assigned a constant value K2 in your target ODS.
Please change the constant back. Go to RSA1, change target ODS, find 0FISCVARNT, right click it and choose 'Provider-specific Properties', remove K2 from 'Constant'.
Now try the reload and I'm sure no more issues. If you really want the constant then you have to change data or transformation.
p.s. Don't forget re-activating transformations and DTP
Regards,
Frank
Edited by: Frank Lee on Jul 14, 2009 3:13 PM

Error when pulling data to an infocube

Hello gurus,
Today i got this error in a daily task of pulling daily data to an infocube:
"Data records were selected in the PSA
Diagnosis
Data records were marked as incorrect in the PSA.
System Response
If error messages exist for the data records, the corresponding data packets were not updated using the PSA.
Procedure
Go into the PSA maintenance for the request and read the logged messages.
You find the relevant messages for each record in the PSA table by double-clicking on the status of the record.
Where necessary, edit the incorrect records or remove the error in another way.
Post the incorrect data packets manually.
Note that you are only permitted to edit and manually update the request if it is not contained in the request list in the InfoCube (see InfoCube administration). Where necessary, first delete it from the InfoCube."
I've looked in the PSA the records that went wrong, but there were a lot. So manually it would take ages to fix all of them.
The error i received in these records was
"Record 117 :Contents 0,00 from field ZZFACTURACAO cannot be converted in type CURR ->l"
"Record 117 :Contents 0,00 from field ZZFACTANOCON cannot be converted in type CURR ->l"
"Error in an arithmetic operation in record 117"
for each one of the records with errors.
First i've just updated the delta, with no succes. And the two requests stayed ein the PSA and Infocube. It didn't work.
I've deleted the requests from the infocube, then deleted the requests from the PSA. I've retriggered the infopackage.
Now, the daily job is still running, but the request pending in the PSA is the one i've done before. Should i wait, or i have done something wrong?
Please help
Thanks in Advance
Vitor Hugo Ferreira

Yes, it is "Char" type.
I checked the error registries, and these two fields are filled with decimal numbers.
But, the job runs for about 4 months, and sometimes i had to do a "Delta update" when some problem occured, this time that didn't work and i got this error.

Error while loading data after level 17 patch

Hi all,
A week ago we had patch level 17 implemented on our SAP NetWeaver BI 7.0 system. Since then, we cannot load any data to some cubes using update rules. We get "Error when generating the update program" (Message no. RSAU484), status red while loading data.
I tried activating the update rules
We get te same error when loading data from a DSO into a cube.
The strange thing is that it doesn't happen for all the objects in the system. We have troubles loading deltas from 2LIS_12_VCITM (delivery items), 2LIS_13VAITM (sales order items) and from a BI content DSO in assets accountng.
Please if you have any idea or if this happend to you, i appreciate any suggestion.
This is not an implementation, these processes are already live for months, and we didtn't have any problems before the patch..
thanks,
Andreea

We ran into same issue & another one during our BI 7.0 SPS15/SP17 upgrade.
The solution:
1. Apply 2 notes:
[Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update|http://service.sap.com/sap/support/notes/1146851]
[Note 1152453 - Termination generating InfoCube write program|http://service.sap.com/sap/support/notes/1152453]
2. Then run program RSDD_RSTMPLWIDTP_GEN_ALL
to generate the new programs for InfoCubes from the template RSTMPLWIDTP and cleans up the staging table RSUPDINFO per note 1152453.

BEx Analyzer Error "NO APPLICATION DATA FOUND".

Hello Experts,
I have a problem, when i am going to create a query in BEx analyzer.
I got this Error "NO APPLICATION DATA FOUND".
I already check that Particular InfoCube, The Cube is fine and also it contains Data.
But the Problem begins Same.
Thankyou,
Kshitij Deshmukh

Hello,
I have solved this problem on my own.
Solution: 1st check your target over query is excuting...there is data or no... in Tcode "LISTCUBE".
Then data is available... or not.
If every thing is ok...then dorp the query....create anothor and checked by only 2 fields....if is working then ....comptele it.....if data is there then no problem....report should run...
check ur data is ready for reproting.... i means reporting icon is available or not.????
If the Problem begin Same "NO APPLICABLE DATA FOUND".
Then the Problem in Loading.
2. Click on cube choose manage tab...there will be reproting symbol....
Need to check each steps if data is there or Report not running....
Finally delete the request then again load the data..and icon should come automatically...
3. There is R and below one excel sheet fighre...icon
4. Go and make a Report in BEx Analayzer..
Data will fetching Automatically....
Thank you
Regards
Kshitij Deshmukh

Simple question: validate infocube data by comparing it with PSA data

Hi all,
I want to validate infocube data by comparing it with PSA data, for that i went through PSA via context menu. After that i generated export datasource. Then i am not able to find PSA Export datasource? where can i find that..
Thanks
raju

Hi all,
I´ve tryied to VALIDATE INFOCUBE DATA BY COMPARING IT WITH PSA DATA making the step by step contained in the HOW TO ...
The problem is that I have the following error when i activate the transfer rules after aggregating the infoobjet 0TCTREQUID and don´t know how to resolve it:
" IDoc segment /BIC/CICA7ZBW_RECEP_DI could not be assigned to IDoc ZSCA002
Message no. RSAR240
Diagnosis
The transfer structure is assigned to IDoc ZSCA002 as an IDoc segment for the data transfer between source system and Business Information Warehouse.
This assignment failed.
System response
IDoc segment /BIC/CICA7ZBW_RECEP_DI not known to IDoc V2&. Therefore, no data import can take place from the source system for this InfoSource."
Any idea of what could have happend?
Thanks in advance,
Diego

Error while displaying data of a Infoset with Cubes

Hi,
The following error displays when I try to read Infoset, which have 2 infocubes joined with inner join.
"IBM][CLI Driver][DB2] DSNT408I SQLCODE = -204, ER ROR: SAPR3.T00001 IS AN UNDEFINED NAME DSNT41 8I SQLSTATE = 42704 SQLSTATE RETURN CODE"
"Error when generating the SQL statement"
"Error reading the data of InfoProvider <Infoset Name>"
Any one familier with this problem?
Experts..any know causes or solutions for this?
Thanks.
Chenna.
Edited by: CHENNA S on Jan 6, 2009 2:28 PM

All objects are active and checked.
In my testing I have noticed it is not accepting InfoCube . Any one know why its happening? What's wrong with the cubes in this InfoSoft?
Thanks.
Chenna
Edited by: CHENNA S on Jan 6, 2009 3:17 PM

Attribute Change Run aborted with an error :Not all data indexed for index

Hi,
I have an issue where the master data Attribute Change Run aborted with an error pointing to the BWA:
Attribute Change Run aborted with an error :Not all data indexed for index
we tried to load only 0 data into it,the error still occured.

Detail message is following:
not all data was indexed for index 'GBP_BIC:XYCH_098('0' for '114')
creation of The BIA INDEX for infocube 'YBC_SD015' terminated while filling

Short dump while displaying infocube data

Hi Folks,
I have created one infocube in BW 7.3 with 2 characteristics and one keyfigure for uploading flat file data.
I have successfully uploaded the data into infocube.When i go for displaying data by right click on the infocube it is throwing some short dump.
Pls find the short dump below.
Category                         ABAP Programming Error
Runtime Errors               RAISE_EXCEPTION
ABAP Program               SAPLRRSI
Application Component BW-BEX-OT
Error analysis                                                                                |
A RAISE statement in the program "SAPLRRSI" raised the exception
condition "X_MESSAGE".
Since the exception was not intercepted by a superior
program, processing was terminated.
|
We are using BW 7.3. Pls help me ..Thanks in advance.
Regards
sri

Hi,
check following threads as well
1. ST03N Raise Exception Shortdump when Access BI Workload
2 See if you can activate the Infocube RSDG_CUBE_ACTIVATE
3. CHECK if you have sufficient memory to work in case this is dev or test system
4. check in RSRV in case there is any issue with design
5. InfoCube Data not Visible in BI
Go to Manage>Infocube content>Execute(you may not be able to see anything here)>in the menu (where DETAILS, SORTING)etc are available click on the 10th option> CHANGE LAYOUT--> You may not have anything selected at the left pane in this pop up window.
Select all or your desired objects from COLUMN SET to DISPLAYED COLUMNS. Click on the tick mark & ow see.I think it'll help u...
As suggested you may have some authorization issue.
Thanks and regards
Kiran

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

'Error while signing data-Private key or certificate of signer not availabl

Hello All,
In my message mapping I need to call a web service to which I need to send a field value consist of SIGNED DATA.
I am using SAP SSF API to read the certificate stored in NWA and Signing the Data as explained in
http://help.sap.com/saphelp_nw04/helpdata/en/a4/d0201854fb6a4cb9545892b49d4851/frameset.htm,
when I have tested using Test tab of message mapping it is working fine and I am able to access the certificate Keystore of NWA(we have created a keystore view and keystore entry to store the certificate) and generate the signed data ,but when I test end to end scenario from ECC system,it is getting failed in mapping with the error
' Error while signing data - Private key or certificate of signer not availableu2019.
Appreciate your expert help to resolve this issue urgently please.
Regards,
Shivkumar

Hi Shivkuar,
Could you please let me know how you were trying to achieve the XML signature.
We have a requirement where we have to sign the XML document and need to generate the target document as following structure.
<Signature>
     <SignedInfo>
         <CanonicalizationMethod />
         <SignatureMethod />
         <Reference>
                 <Transforms>
                 <DigestMethod>
                 <DigestValue>
         </Reference>
    <Reference /> etc.
</SignedInfo>
<SignatureValue />
<KeyInfo />
<Object>ACTUAL PAYLOAD</Object>
</Signature>
I am analyzing the possibility of using the approach that is given in the help sap link that you have posted above. Any inputs will be apprecited.
Thanks and Regards,
Sami.

Error while saving date value in Java dictionary

Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
Bhavik

Hi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: <b>target_date</b>
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
          int l_year;
          int l_month;
          int l_days;
          l_year = target_Date.getYear();
          l_month = target_Date.getMonth();
          l_days = target_Date.getDate();
     Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik

Error while generating Data provider

We are facing a weird issue while using Design Studio 1.2. Locally the tool works fine but when we use it from BI-Launchpad or through BI Enterprise it gives intermittent error "Error while generating Data Provider"
Same setup works fine in our Validation Environment.
We have tried running repair for Design Studio, redeploy the war files, creating new view but issue still exist.
We have BI 4.0 SP7 installed on Windows 2008 R2 system.
4 CMS running in cluster, Design Studio 1.2 is installed on 3 Nodes out of 4.
For now we are using 1 tomcat to access the system to narrow down the issue.
Experts please help us to resolve this issue.
Attach is the error message we are receiving

I am not clear what your data source is, but I recommend checking the PAM https://websmp102.sap-ag.de/~sapidb/011000358700001013822013E because there are some limitations with Design Studio and BI4.0

Error in Infocube Data

Similar Messages

Maybe you are looking for