Error in InfoPackage, however monitor is ok

Hello,
When you run a process chain in synchronous mode, an error occurs in the Info Package (already occurred with several random objects), but the monitor to check the infopackage that is beginning with an error, I notice that the performance is ok.
Someone has seen something ?

Hi Bruno,
Go through the link below and I hope this may helps u
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Regards
Sudheer

Similar Messages

  • Error in Seeburger Message Monitoring

    Hi ,
    I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
    I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.

    Really didn't understand your scenario. That sentence makes no sense:
    "I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
    But what I understand from the error message you have provided...................
    if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
    Under Parameters Tab:
    You must have set the following parameter
    MDN Mode = "ASYNC"
    And has not provided the following parameter just below it :
    Receipt Delivery Address
    This parameter should have value: the URL of your own AS2
    server where the asynchronous MDNs are
    to be delivered.
    Hope this solves your problem.
    Regards,
    Suddha

  • Advance selection for source file-Error in communication channel monitoring

    Hi all,
    Referring to the link below:
    <b>/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
    I have developed my scenario in the same way.But due to the values <b><NOTHING></b>
    in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
    Plase note that  our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
    Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
    Thanks & Regards,
    Sudhir Tiwari

    Sudhir,
    In the sender file adapter, you have an option called <b>"Processing Sequence"</b>.
    By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
    In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
    Regards
    Bhavesh

  • File to Proxy Scenario : Error in communication channel monitoring

    Hi,
    I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
    u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
    File will be picked from the FTP server.
    I have created File system in SLD of type "Third Party", Can this be the issue?
    Please guide me on this.
    Thanks,
    Chandravadan

    Hi!
    Check if the tcode SLDCHECK is ok!
    Check note #764176.
    Also, refer to link below and execute each steps from the links there MANUALLY.
    Wizard-Based Configuration:
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
    Regards,
    Caio Cagnani

  • Error in ftp receiver monitor

    Kind people, I'm getting this error with an InterConnect FTP adapter (the adapter is on one box, the directory it reads from on another box):
    Transport logs:
    [IPT_FileRecMonitorError] Error in ftp receiver monitor.
    oracle.oai.agent.adapter.transport.TransportException: Unable to enter passive mode. rc = 425 425 Can't open passive connection: Too many open files.
    at oracle.oai.agent.adapter.transport.basic.ftp.FTPAgent.getFileList(FTPAgent.java:259)
    at oracle.oai.agent.adapter.transport.basic.FileSource.getFileList(FileSource.java:210)
    at oracle.oai.agent.adapter.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:399)
    at oracle.oai.agent.adapter.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:185)
    Caused by: java.io.IOException: Unable to enter passive mode. rc = 425 425 Can't open passive connection: Too many open files.
    at oracle.oai.agent.adapter.transport.basic.ftp.FTPClient.establishDataConnection(FTPClient.java:206)
    at oracle.oai.agent.adapter.transport.basic.ftp.FTPClient.listFiles(FTPClient.java:431)
    at oracle.oai.agent.adapter.transport.basic.ftp.FTPAgent.getFileList(FTPAgent.java:253)
    It seems to me (maybe) that what is happening is that InterConnect is not closing the FTP connections after it FTPs a file, and after a while there are too many connections open. If I bounce the adapter, it works fine again for a period of time. I also delete the log files, but don't know if that has any relationship to this. Is there some parameter in the adapter.ini file I can set, or do I need to see a Unix sys admin about this???
    Thanks in advance for any insight you might be able to provide!

    This was addressed in a similar TAR: 4380173.994. Here is the solution I remember:
    ### Detailed Problem Statement: ###
    When FTP adapter has run for some time (1 or 2 days) it keeps on failing with
    error message:
    Caused by: oracle.oai.agent.adapter.transport.TransportException: Unable to
    enter passive mode. rc = 425 425 Can't open passive connection: Too many open files
    at oracle.oai.agent.adapter.transport.basic.ftp.FTPAgent.getFileNames(FTPAgent.java:
    253)
    at oracle.oai.agent.adapter.transport.basic.FileSource.getFileNames(FileSource.java:190)
    at oracle.oai.agent.adapter.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:323)
    at oracle.oai.agent.adapter.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:123)
    Caused by: java.io.IOException: Unable to enter passive mode. rc = 425 425
    Can't open passive connection: Too many open files
    at oracle.oai.agent.adapter.transport.basic.ftp.FTPClient.establishDataConnection(FTPClient.java:205)
    at oracle.oai.agent.adapter.transport.basic.ftp.FTPClient.listNames(FTPClient.java:455)
    at oracle.oai.agent.adapter.transport.basic.ftp.FTPAgent.getFileNames(FTPAgent.java:246)
    ... 3 more
    This error was already reported in tar 14948114.6. The solution back then was
    to increase no of open files in server running the adapter. We have done that
    but it does not seem to help (it might take some more time to run to this error
    though).
    POTENTIAL SOLUTION(S)
    ======================
    Set the following adapter.ini parameters:
    sender.keep_connections=false
    receiver.keep_connections=false

  • Process  Error in the Application Monitor

    Dear All
    we currently have the below shown Process  Error in the Application Monitor. it is absolutely impossible to delete them.
    What can cause this problem, please I need a solution on how to remove them for ever.
    Application Monitors
    Shopping Cart 
    Shopping Cart :  Not transferred to backend 
    Date  Time  Error Message 
    26.03.2011  00:29:36    
    26.03.2011  01:29:36    
    Shopping Cart :  Backend application errors 
    Date  Time  Error Message 
    25.03.2011  12:22:06
    Kind Regards
    Marco

    Hi,
    Try to locate the error in RZ20 transaction and delete it from there, then refresh your application monitor.
    regards,
    MRao

  • TS3694 my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.

    my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
    I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please help

    This is what it says about error 2006
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • Have a hp photosmart getting scan error , i am however able to copy and print to same printer?

    have a hp photosmart getting scan error , i am however able to copy and print to same printer?

    Hello Maria444
    The community needs some more information so that they can help you. If you could, please share the model of your printer as well as any other prevalent information such as Operating System. Also have you ever been able to scan and if so has anything changed recently with your devices.
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Error Code (16) Transport Monitor.

    I am having an error code (16) Transport monitor error come up when I turn on my MacBook and again when I try to download Hot Sync to communicate with my Palm. Can someone help me fix this problem. It has only recently started.

    Hello Amy - if you have a MacBook you need to post in that forum [here|http://discussions.apple.com/forum.jspa?forumID=1167]. You shoud also take a look a the Palm Syncing support web pages [here|http://www.palm.com/us/support/macintosh>.
    Hope this helps,

  • Error handling, logging and monitoring business process

    I would like to know more about error handling, logging and monitoring in business process? Can someone give more information on this one?

    Chandran
    Please refer to following tutorials to understand each of these topics in detail:
    Validations:
    http://www.orafmwschool.com/validations/
    Exception Handling:
    http://www.orafmwschool.com/exception-handling/
    Fault Management Tutorial:
    http://www.orafmwschool.com/fault-management-tutorial/
    Business Activity Monitoring Tutorial:
    http://www.orafmwschool.com/bam-tutorial/
    You'll have to refer to Oracle documentation to understand more finer details.
    -Amjad.

  • How do we find the previous error details in the monitor (details tab).

    Hi Experts,
    While loading data to a target via PSA we got an error (ex. data error), we edited in PSA and reloaded to target from PSA successfully.
    Here my problem is how do we find the previous error details in the monitor (details tab).
    Kindly post your comments on this......
    Thanks in advance.......
    Regards,
    Sankar Reddy

    Hi,
    While updating any request from PSA, you have to delete the first erroneous request from data target and then update the PSA request. If you do not delete the erroneous request, it will not allow you to update the PSA request.
    Regards,
    Yogesh

  • WHEN I SEND VIDEO TO COMPRESSOR 4 I GET A ERROR 0 IN SHARE MONITOR DOES ANYONE KNOW WHATS GOING ON

    HELLO  I AM A FCPX USER SENT JOB TO COMPRESSOR ,42 MINUTES INTO CODING I GET A ERROR (0) FROM SHARE MONITOR.I AM USING 2006 MAC PRO ,SNOW LEOPARD, 12 GIGS OF RAM...

    pull the logs form the console.app.. have a look for COMPRESSOR.app or QMASTER if you have it started. Maybe a general error.. see what you can find and as BEnB asks post your results.

  • Re: trasport error datamart infopackages

    Dear all expert,
    While I transport infopackages under datamart i getting this error
    Object 'DM' (APCO) of type 'Application' is not available in version 'A'
    Message no. RSO252
    Diagnosis
    You wanted to generate an object with the name 'DM' (in transport request APCO) of type 'Application' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    System Response
    The object was not taken into account in the next stage of processing.
    please guide me
    Regards,
    Jagadish

    Hi,
    Just check if the data mart object is present in the target system or not.
    Or if the object itself is active or present in the target system or not??
    go to infosurces option and search for it begining with 8* followed by the object name.
    If not then generate the object again.
    but you can create the infopackage in the target system directly.
    Thanks
    Ajeet

  • How do I avoid errors on a Multi - monitor setup?

    Hi.
    I want to use Photoshop CS6 on a Multi - monitor setup, using iGPU multi-monitor + GPU system for 4 monitors.
    Preiously, I used Photoshop on a Multi - monitor setup without useing iGPU multi-monitor.
    And, Photoshop worked well.
    However, when I wanted to use 1 more monitor, my GPU supports only 3 monitors.
    Then, I enabled iGPU multi-monitor function. It supports 2 more monitors.
    At first, It worked. But, after I use "Free transform", "Transform"  or something like these tools, Photoshop hang up!
    I couldn't figure out the reason why these errors happened.
    I need ways to avoid these errors.
    Thanks.

    Thanks for viewing this discussion.
    Finally, I brok through this problem.
    I show you how to do, in case of when you face to this problem.
    The way to solve this problem is, simple, "buy a new GPU."
    But, there is 1 important point, you should buy a same bland's GPU.
    In my case, I have SAPPHIRE'S RADEON HD5670, and I bought SAPPHIRE'S RADEON HD 6450.
    I think that Photoshop GPUsniffer was confused about GPU driver.
    Because there were 2 drivers -- Radeon and Intel Graphics -- exist.
    That's why Photoshop hang up.
    For your reference,
    Best regards.

  • U2413, X-rite, error communicating with the monitor

    I went to calibrate my U2413 monitor for the first time. Took me a little while to buy a i1Display Pro since that did not come with the monitor. I plugged in the i1Display Pro and ran the  Dell UltraSharp Color Calibration Software. Like many other people in the forum before me. I received the error about 5 seconds into the setup for the software "Could not prepare the display for calibration. Error communicating with the display." At first I thought it might be an issue with the USB cable. 
    However, after reviewing the forum, there is clearly a software glitch that has been going on for some time, appears over a year. It is surprising that they have not done a fix. Additionally, when you go to the check for updates feature on the software to look for updated drivers/software, all you get is a blank screen at Xrite.com. Does that mean there are no newer drivers or just that the software and the Xrite.com site are not integrated. Have found a large number of dead links on the Dell site in general.
    I am not sure here to go for an updated driver of other solution. Has anyone tried moving to the Spyder calibration software to see if it has better results?
    The computer to which the monitor is connected is running Windows 8.1 so it is not a Mac issue.

    Let us review the basics =
    * The monitor USB upstream cable must be connected to the computer USB port
    * In a two or more monitor setup, only ONE monitor should be connected to the computer at a time when calibrating
    * DP 1.2 must be disabled in the monitor OSD (On Screen Display) before calibration
    * The i1Display Pro device should be tested in TWO ways =
    Test it on all of the monitor bottom USB downstream ports
    Test it connected directly to the computer USB port
    The U2413 driver page does not list 8.1, so I chose 8. It list two older versions of the Xrite software 1.0.0.0 and 1.0.1.0. You need to unistall the version installed. Then install the latest version (1.5.7.141118) and re-test. I realize under "Compatible Systems" it does not list your monitor model. But try it anyway. If it does not work, uninstall it and test Version 1.5.3.

Maybe you are looking for