Error in InfoView "The Parameter Value is not Valid"

Hello,
I have developed a Crystal Report in CR2008 and uploaded in the InfoView. Now when i run the report via scheduling or load the report with the data and try to change the parameter (editable set in CR) from the drop down list and hit apply i get an error dialogue box "The parameter value is not valid" and message says "null".
Also another issue is that i cannot execute the report directly in InfoVIew, i have to schedule it to run the report. Report is connected to the SAP InfoSet.
Any input would be much appreciated.
Thanks.

We have rebuild new servers for InfoVIew and it just works fine. Both the problem solved.

Similar Messages

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

MDSModelDeploy Operation Failed, clone cannot be deployed, The Attribute Value is not valid

I've created a model containing a customer entity with various domain based attributes. I've populated the entities via a combination of manual entry and the staging tables. In the source system I have approx 950 customer records, all of which
fail validation on the source system as some of the attributes will be maintained only in MDS and are not in the source systems I'm pulling the initial data from.
I ran the MDSModelDeploy.exe to create a package containing data on the source system. I then ran the package to apply the package using the -deployclone option on my target system. I piped the output into a flat file for review.
Here is the error I'm receiving.
MDSModelDeploy operation failed. Elapsed time: 00:01:00.2314612
Error:
A clone of the "Subzero_1" model cannot be deployed.
An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
Package deployment failed with 344 errors
The attribute value is not valid.
The attribute value is not valid.   (repeated 344 times)
Any ideas what the issue might be? I have tried verbose logging as well and did not find anything that would point me in the direction of the problem. The end result was that the model was not deployed to the target.
I have also created a package without data, deployed that, then applied the data. This gets the model to the target and the data also appears to be there but I did receive this error on the deployupdate.
This is on SQL Server 2012.

I am seeing the same error. Created a model, Cloned the model. Made changes to the clone (Schema and Data), and used MDSModelDeploy UpdateModel to update the primary (not cloned) model. In looking at the log, I see the error shown below, but I do not
see anything that points to what was happening at the time.
I tried running a SQL trace to see if one of the SQL commands received an error, but none of the commands did.
In looking at the model that was updated, I can see all of the schema changes were made, and most of the data was updated. There is one table that did not update completely. The attributes in the table consist of Domain Specific and text attributes only.
I also verified that everything on both models was validated before starting.
In the weblog I see the error listed below, but there is nothing in the data that would match that value
Not sure were to go from here....
Chad
--- MDSMODELDEPLOY ERROR RECEIVED ---
MDS Error: 0 : Microsoft.MasterDataServices.WebUI.ServiceAdapterObjectInvalidException: An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.InspectResponseForErrors(MessageRequest request, MessageResponse response)
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.ExecuteRequest[TRequestType,TResponseType](MdmServiceOperation`2 operation, TRequestType request)
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.DoEntityMembersMerge(EntityMembers entityMembers)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.BatchEntityMembersMerge(Collection`1 masterData, Boolean membersOnly, Int32 batchSize, Int32 totalBatches, Collection`1 errors)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.UpdateData(Collection`1 masterData, Warnings errorsAsWarnings)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.DeployUpdate(Package package, Boolean includeData, Identifier targetVersionId)
   at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.DeployUpdate(String serviceName, String packageFile, String versionName)
   at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.Main(String[] args)
    DateTime=2014-02-06T16:03:17.8405277Z
-- WEB ERROR RECEIVED --
MDS Verbose: 0 : Unable to convert value of query string parameter Id = VID to an integer
    DateTime=2014-02-06T17:18:00.7367274Z

Urgent - parameter values are not getting posted

Hi
I have a url in the wf notification that directs the user to the oaf page, the parameters are being sent as url parameters. I have no problem in accessing in the processRequest method of first page. But When I try to read the same in processFormRequest method of trainCO, I am not getting values. Any idea why?
I tried with pageContext.putParameter() method in processRequest even the parameter value is not avaialable in processFormRequest. How to pass the parameter value from processRequest to processFormRequest?

If the parameters are url parameters then they will be available in the processFormRequest also. If they were added using pageContext.putParameter then it will not be available in the processFormRequest

SAP BW query to BOBJ Universe: The supplied XML is not valid.

Help!
The Business Objects Sever XI is giving us messages like the below, on some but not all BOBJ Universes based on SAP BW queries.
A database error occurred. The database error text is: The supplied XML is not valid. [various InfoObjects] [LEVEL01] (WIS 10901)
These queries were executing 1 working day, 3 calendar days ago. No transports to SAP BW or promotions to BOBJ were made.
Any ideas?
Thanks,
John Hawk
When we refresh the Universe, we get this mesdage
Error getting hierarchies for dimension 0INFOPROV (Cube FIGL_M10/FIGL_M10_Q001): Exception condition "HIERARCHY_NOT_FOUND" raised
Edited by: John Hawk on Jun 1, 2010 9:15 PM

Hi John,
I'm also getting same error 'Error getting hierarchies for dimension 0INFOPROV (Cube ZLE_M10/YBO_FREIGHT_ZLE_M10_UNIV_MPT1): Unknown error' when tried to create universe on top of query which is based on multi provider. Could you please send me copy of program ZZ_REPAIR_HIEDIR?
Thanks,
Milind

SSO App Config : 0xC0002A1C, The account name is not valid or does not exist.

Hi there,
We are using BizTalk Server 2010, I want to use the SSO to store and modify sensitive data. I am trying to automate through scripts the creation and updates of the SSO.
So I used the sso manage to create the sso application where I want to store my data. Everything works fine. Then when I try to access the data
I got the error :
SSO AUDIT
Function: GetConfigInfo (ConfigProperties)
Tracking ID: 701b9529-a356-4bdd-ac63-d8152a838370
Client Computer: <MyComputer> (SSOApp.exe:4508)
Client User: <Domain>\<BizTalkUser>
Application Name: <SsoApplication I just created with ssomanage>
Error Code: 0xC0002A1C, The account name is not valid or does not exist.
Check group membership failed.
Group Name: <Domain>\<BizTalkUserGroup>
Account Name: $ConfigStore$\ConfigProperties
Additional Data: 533
Error Code: 0xC0002A1C, The account name is not valid or does not exist.
By googling I seem to be missing one step related to
BTSScnSSOApplicationConfig.exe But I looked everywhere, I didn't know where to find this exe file. Do I have to download something? Where can I find it? was it renamed to something else?
Thx for any help,
Stefan

Hello,
I found finally the solution to my problem.
You'll need to use the ssomanage and use the to
BTSScnSSOApplicationConfig.exe found in the link mentionned previously.
In order for it to work, a special attention needs to be paid to the AffiliateApplication.xml
The contact XmlElement is important (it's not an email address as I used to think (smile))
Regards,
Reporting Solution for BizTalk |
follow-us on twitter

Reporting Server Web Service- (FileShare) CreateSubscription: The value of parameter 'ExtensionSettings' is not valid

I've tried to create a subscription by Web Service api calling the method CreateSubscription and I've an error:
> The value of parameter 'ExtensionSettings' is not valid. --->
> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidParameterException:
> The value of parameter 'ExtensionSettings' is not valid.
Below is my code:
ReportingService2010 m_RptManager = new ReportingService2010(); m_RptManager.Url = "<path>/ReportService2010.asmx"; m_RptManager.Credentials = GetCredential(); string filename = Path.GetFileName(m_FileName); string path = Path.GetDirectoryName(m_FileName); ParameterValue[] extensionParams = new ParameterValue[7]; for (int i = 0; i < extensionParams.Length; i++) extensionParams[i] = new ParameterValue(); extensionParams[0].Name = "FILENAME"; extensionParams[0].Value = filename; extensionParams[1].Name = "FILEEXTN"; extensionParams[1].Value = "False"; extensionParams[2].Name = "PATH"; extensionParams[2].Value = path; extensionParams[3].Name = "RENDER_FORMAT"; extensionParams[3].Value = m_Format; extensionParams[4].Name = "WRITEMODE"; extensionParams[4].Value = "Overwrite"; extensionParams[5].Name = "USERNAME"; extensionParams[5].Value = m_UserName; extensionParams[6].Name = "PASSWORD"; extensionParams[6].Value = m_Password; ExtensionSettings extensionSettings = new ExtensionSettings(); extensionSettings.Extension = "Report Server FileShare"; extensionSettings.ParameterValues = extensionParams; MinuteRecurrence pattern = new MinuteRecurrence(); pattern.MinutesInterval = 1; ScheduleDefinition schedule = new ScheduleDefinition(); schedule.StartDateTime = DateTime.Now; schedule.EndDateSpecified = false; schedule.Item = pattern; XmlSerializer serializer = new XmlSerializer(typeof(ScheduleDefinition)); string dateMatch; using (StringWriter sw = new StringWriter()) { serializer.Serialize(sw, schedule); dateMatch = sw.ToString(); } string reportPath = "MyReport"; string eventType = "TimedSubscription"; string description = "description"; m_RptManager.CreateSubscription(reportPath, extensionSettings, description, eventType, matchData, GetReportParameters(reportPath));
Where have I wrong?

Thank for reply, I checked my parameter and I seem that (maybe) is ok below is my parameters, do you see anything of wrong?
<?xml version="1.0" encoding="utf-16"?>
<ExtensionSettings xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Extension xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/03/01/ReportServer">Report Server FileShare</Extension>
<ParameterValues xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/03/01/ReportServer">
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">FILENAME</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">pippo.xls</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">FILEEXTN</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">False</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">PATH</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">\\10.4.44.253\D$\Data Applications\DBP\Output\DOMAIN\User\14</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">RENDER_FORMAT</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">EXCEL</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">WRITEMODE</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">Overwrite</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">USERNAME</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">domain\user</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">PASSWORD</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">xxxxxx</Value>
</ParameterValue>
</ParameterValues>
</ExtensionSettings>

Error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap

Hello Experts
The error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap occurs after manager’s following actions:
selected detailed Team View ;
selected hierarchy;
changed style of the hierarchy to any other (for example, the vertical);
the error occurs after attempting to do any action.
Our system is EHP7.
If someone faced with this error, please give me advice how can i resolve this problem.

Hi John,
Sorry for the delay in replying. No, we do not have the same problem if we understand you correctly.
"We have bypassed the MSS Home Page and just embedded the Detailed Team View as a standalone application in our MSS portal role" - we also made for the our customer. BUT we have error «The entered value is not on the list of valid values» in our standard system.
Regards,
Andrey

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

Error : This balancing segment value is not valid for the current ledger

Dear friend,
Error : This balancing segment value is not valid for the current ledger.
when I click Account Assignment in Budget Organization.
I used R12
Thank you
Best regards,
Hareyuya, Junior.

Hi,
Please see these documents.
Note: 756765.1 - Cannot Use Parent Balancing Segment Values In Massbudget or MassAllocation Formula
Note: 790339.1 - Cannot Select Parent Values In Mass Budgets
Note: 437588.1 - Rel 12: Balancing Segment Value Is Not Valid For Current Ledger
Regards,
Hussein

Checkbox error "The Entered Value is Not on the List of Valid Values".

Hi All,
I have a check box attribute inside a node which is bounded to a field of type CHAR 1. I have given the property and value for the attribute as follows:
Attribute Name     ZCHECK
Type assignment     Type
Type                          ZTABLE-ZCHECK
Read-only                         0
Default Value
Null Value                           0
Input Help Mode     Automatic
Determined Input Help     ZCHECK
Type of Input Help     Fixed values for domains
Formatting
Compression     Default Value
I have created an onToggle Event for it.
Now when i execute my component i do the following.
First i click on a button called 'EDIT'. Now the check box comes to edit mode. Now when i click on the checkbox i get the following error. "The Entered Value is Not on the List of Valid Values".
When i try to debug, there is no problem in the 'INIT' method. The error is throw even before going inside the onToggle Event for check box.
Please explain how to over come this.

Hi,
Check your field ZTABLE-ZCHECK, if it is of type CHAR1 then only possible values for checkbox should be 'X' and ' '.
May be your domain has some other values in Fixed Value List.
its better to bind checkbox with attribute of type boolean
Also, the input help for attribute bound to checkbox doesn't makes any logic.
Regards
Manas Dua
Edited by: Manas Dua on Feb 26, 2010 3:11 PM

An error has occurred: The plugin -65221 does not exist in the CMS

Hi,
I already raised this issue before and I thought this is already fixed. Everytime I upload this Crystal Report and try to schedule it using the RESCHEDULE window, I can't change the parameters. Everytime I click on the value of each parameter, the following error displays:
"An error has occurred: The plugin -65221 does not exist in the CMS"
What can be the cause of this and how can I resolve this? We are using Business Objects XI R2 with SP2 and Crystal Reports XI.
Thanks.

Hello Neozeke,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

An Error has occured:The plugin 65534 does not exist in the CMS (FWM 02017)

Hi,
I get the error when I click on Parameter option while rescheduling Crystal Reports from Infoview. I can schedule the reports successfully, the error is only while rescheduling.
The error is as follows:
An error has occurred: The plugin -65534 does not exist in the CMS (FWM02017)
Environment - BOXI 3.1 with Windows AD
Application server - Tomcat
Would appreciate any help.
Regards,
Anisa

Hello Anisa,
Are you able to solve the issue...
We are also getting same issue. if you are able to resolve the issue. please let us know the setps you followed it will be of great help.
Thank You,
Regards,
Satheesh Reddy. R.

Enque/table_size - Changing the parameter value

Hi folks,
I'm fairly new to SAP so was hoping for a bit of guidance with this matter.
I need to increase the parameter value for "enque/table_size". It's currently set to the default 4096kb and we're seeing a lot of lock table overflow errors.
As the default value with Kernel 7.01 is 32MB, this seems like a good place to kick off.
I've gone into RZ11 and entered the parameter name.
Presumably, I select "CurrentValue" and Edit > Change Value?
Because Change Value is greyed out.
I have SAP_All in terms of authority.
So I'm a bit puzzlied!
Any help would be appreciated.
Thanks

It seems your profile is not activated properly .
First search for the value of the parameter in RZ11 or TU02 , If the value of the parameter is old proceed as either of the follows
1 ) Go to /sapmnt/<SID>/profile , open the DEFAULT.PFL in an editor and add the entries . Bounce the system and check whetehr the entry appears in theRZ10 ( DEFAULT.PFL ) , since enqueue might be configured only in CI you can also do it in the instance profile
2 ) Second option is to go to RZ10 , Open Default or instance profile ( Extended Maintainance ) , create the parametes ,Copy . Save . Activate the profile . Check version of the profile . Bounce the system and check again . This step is recommended
Thanks ,
Manu
SAP Basis

Unable to capture the parameter values from a PL/SQL procedure

hi.
i'm trying to capture the parameter values of a PL/SQL procedure by calling inside a anonymous block but i'm getting a "reference to uninitialized collection error" ORA-06531.
Please help me regarding.
i'm using following block for calling the procedure.
declare
err_cd varchar2(1000);
err_txt VARCHAR2(5000);
no_of_recs number;
out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
cntr_var number:=0;
begin
     rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
     dbms_output.put_line('The error is ' ||err_cd);
     dbms_output.put_line('The error is ' ||err_txt);
     dbms_output.put_line('The cntr is ' ||cntr_var);
     for incr in 1 .. OUT_SIGN_TAB.count
     loop
     cntr_var := cntr_var + 1 ;
Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN_TAB(incr).txn_type||','||OUT_SIGN_TAB(incr).objid);
end loop;
end;
Error is thrown on "for incr in 1 .. OUT_SIGN_TAB.count" this line
Following is some related information.
the 3rd parameter of the procedure is a out parameter. it is a type of a PL/SQL table (SEARCH_SIGN_TAB_TYPE) which is available in database as follows.
TYPE "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
TYPE "SEARCH_SIGN_TYPE" AS OBJECT
(ref_no VARCHAR2(22),
ciref_no VARCHAR2(352),
ac_no VARCHAR2(22),
txn_type VARCHAR2(301),
objid VARCHAR2(1024))............

We don't have your rt843pq procedure, but when commenting that line out, everything works:
SQL> create TYPE "SEARCH_SIGN_TYPE" AS OBJECT
2 (ref_no VARCHAR2(22),
3 ciref_no VARCHAR2(352),
4 ac_no VARCHAR2(22),
5 txn_type VARCHAR2(301),
6 objid VARCHAR2(1024))
7 /
Type is aangemaakt.
SQL> create type "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
2 /
Type is aangemaakt.
SQL> declare
2    err_cd varchar2(1000);
3    err_txt VARCHAR2(5000);
4    no_of_recs number;
5    out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
6    cntr_var number:=0;
7 begin
8    -- rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
9    dbms_output.put_line('The error is ' ||err_cd);
10    dbms_output.put_line('The error is ' ||err_txt);
11    dbms_output.put_line('The cntr is ' ||cntr_var);
12    for incr in 1 .. OUT_SIGN_TAB.count
13    loop
14      cntr_var := cntr_var + 1 ;
15      Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN
TAB(incr).txntype||','||OUT_SIGN_TAB(incr).objid);
16    end loop;
17 end;
18 /
The error is
The error is
The cntr is 0
PL/SQL-procedure is geslaagd.Regards,
Rob.

Error in InfoView "The Parameter Value is not Valid"

Similar Messages

Maybe you are looking for