Error in Installation of Aqualogic User Interaction 6.5

Hi,
I have installed Aqualogic User Interaction 6.5, with Weblogic 9.2, Apache 2.0.63, Oracle 10g.
Portal Diagnostic is running successfully.
But while i am trying to start the weblogic server it is throwing me the following error-
Task 'InitPortalObjects' failed on startup
Task #1 <InitPortalObjects) Step#3
OpenKernal Initialization Failure(Java)
Recommendation:Review the detailed exception listed below for specific analysis. Check that pthome.xml is in the correct place,check that the PT_HOME environment variables points to it, and check that your database settings by runing ptconfig. Check that your database settings by running ptconfig. check that the portalconfig.xml file is accessible by the web application server.
My pthome is in the correct place, also the PT_HOME is pointing at the correct place.
Also the weblogic is pointing to the other machine. Is this the reason for the above error?
Thanks in Advance!

Hi Patel,
Thanks for your update.
Regards,
Hari.

Similar Messages

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

Error when installation of Hyperion 11 interactive reporting web client

I can't install the web client through Hyperion workspace v11.
My steps are:
h3. Workspace --> Tool --> Install --> Interactive Reporting Web Client
Then error message is shown:
unexpected status 400 (no host matches server name XXXXXX.com) returned on XXXXXX:45000/workspace*/dataaccess/../../InsightInstaller/setup.ini access check
Please check if the server is properly configured.
After I pressed OK, another error message is shown:
unable to launch the installer. Please use the information bar (if available) to install activeX control or check if you have Admin right on this computer.
I am using IIS v5.1.
Can any friends help on this issue?
Is there anything to configure in my IIS? or the version is too old ?
Thank you ~!
Jeff T
Edited by: user8102244 on Mar 18, 2009 12:00 AM

Hi,
First try to go the below path and execute setup file
C:\Hyperion\products\Foundation\workspace\AppServer\InstalledApps\workspace_static\zeroadmin\component\Insight
After executing setup file try to install web clientthrough workspace.

BEA AquaLogic User Interaction product does not support LINUX

Hi all,
I realised that ALUI does not support installation for LINUX.(pls see download link at http://commerce.bea.com/showproduct.jsp?family=ALI&major=6.1&minor=0).Does anyone know the plans about this topic?What is BEA's roadmap?

ALUI does currently support Linux (both Red Hat & SuSE) with the the 6.0 SP1 version. The latest version (i.e. 6.1) will support Linux when the first Service Pack for 6.1 is released - tentatively scheduled for the first half of next year. ALUI 6.1 currently supports Windows, Solaris & AIX.
ALUI 6.1 is aligned with how BEA licenses other products where the product is essentially available to download and install for an evaluation period for free. Previous versions of ALUI (including 6.0 SP1) are only available for download for paying customers or partners. Correspondingly, only paying customers or partners can log into the ALUI support site.
The UI Customization Installer for 6.1 (for Windows) is currently available for download and eval from http://commerce.bea.com/showproduct.jsp?family=ALI&major=6.1&minor=0
john

Error in phase creating java users during installation!!

Hi,
We are getting error at step "Creating java Users" while installing NW 2004s SR1 non unicode dual stack on HP Ux Pa Risc 64 bit with database Oracle 10g.
Erro logs of file /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/sapinst_dev.log are as:
==================================================================================================
ERROR      2011-07-21 13:20:37
           CJSlibModule::writeError_impl()
CJS-30197 . For more details see output of logfile:
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2011-07-21 13:20:37 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
=================================================================================================
Also please note that we have already 1 instance (dual stack) on same host and that is running fine.
Could someone please assist us in proceeding further.
Regards
Joy Garg

Hi,
Issue gets resolved by extracting manualy from JAVA_DVD_DIR/J2EE_OSINDEP/J2EEINSTALL.SAR to SAPINST install directory using SAPCAR. The path of this install directory is:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install as:
> pwd
/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install
> SAPCAR -xvf /SW/NW_2004s_SR1Java_based_SW_Comp/J2EE_OSINDEP/J2EE-INST/J2EEINSTALL.SAR
Once we have extracted the J2EEINSTALL.SAR relaunch SAPINST again and the installation continue.
Regards
Joy garg
Once you will have extracted the J2EEINSTALL.SAR please launch SAPINST again and the installation will continue.

Interactive report gives an error only for a specific user

An interactive report based on a very complicated select gives an error only when a specific user is logged on.
The error is:
ORA-00932: inconsistent datatypes: expected - got CLOB.
For other users logging using this page it works fine.
Authentication for this application is done using a stored function.
The query does not use the current userid in it.
Why does it fail for a specific user? if there is a problem, it should fail all the time.

Hi ankur,
By what you said the report dont have any date parameters or no date columns.
"Query execution was not successful ORA-01843 not a valid month." This means it is related with date mask passing a invalid month into date column or argument to to_date function.Check once the session date that is 'dd-mm-yy' or anything else
select * from nls_session_parameters where parameter = 'NLS_DATE_FORMAT'
select to_date('01-DEC-06'),to_date('01-12-06') from dual;
Also a general question whenever I am trying to mark any question as 'Helpful', the status is not changing. Is there anything I am missing.While you flag it 'helpful' or 'correct',it takes you to other screen where you see "Yes, the question is now answered" click the radio button and then click ok button.
Hope its helpful.
Best Wishes,
Kranthi.
Edited by: Kranthi.K on Jun 8, 2009 9:00 AM

Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

I get this error when installing VS 2015 Community RC. I'm installing on Windows 10 build 10074. I tried uninstalling VS and tried performing the steps from other known issues... Change > Custom > Select feature > Update.
I also get the other errors as well...
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

Same issue here, on a Surface Pro 3.
I've tried all I can think of, including a full reinstall of the OS (10074). Basically it always fails with the errors below.
Launching VS I do have the UAP templates installed, but not the emulators. I can create a new Windows Universal app no problem, however it shows up as a Windows 8.1 type in the properties pane. Missing lots of references so obviously nothing builds.
Tried installing the tools separately (the ones linked by Paul Chapman in a separate thread). These installed fine, and gave me the emulators (at least in the drop down, haven't been able to verify they work as nothing else works). Proceeded to "repair"
the VS install after this and at that point the install completed without errors, however nothing still works inside VS. Then proceeded to "modify" and remove any Universal app stuff, rebooted and reinstalled, only to get the same error again and
back at square one.
Tried, as far as I can remember, fresh installs from both the ISO and webinstaller (as there was some talk about the ISO containing older code and missing some tools).
Spent a week trying to get a Win10 rig up now, to no avail. Previous builds (with CTP6) would give me a UAP mobile install error, which seemed linked to Hyper-V not working, however Hyper-V was working just fine...
Oh, and obviously - No, I did not cancel the install myself.
Here are some relevant lines from the install log,
[060C:0CF0][2015-04-30T14:20:08]i000: MUX: Source confirmed
[060C:1994][2015-04-30T14:20:14]i000: MUX: Finished connecting secondary installer pipe
[060C:14D4][2015-04-30T14:20:19]i000: MUX: Updating secondary installer progress display name: Windows 10 SDK 10.0.10069
[060C:14D4][2015-04-30T14:20:25]i000: MUX: Updating secondary installer progress display name: Tools for Windows 10 Universal Apps (Windows SDK 10.0.10069)
[060C:044C][2015-04-30T14:28:13]i000: MUX: ExecuteError: Package (VSSecondaryInstaller_box) failed: Error Message Id: 1603 ErrorMessage: Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Process returned error: 0x80048646
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to execute EXE package.
[060C:044C][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to configure per-machine EXE package.
[060C:044C][2015-04-30T14:28:48]i000: MUX: Installation size in bytes for package: VSSecondaryInstaller_box MaxAppDrive: 0 MaxSysDrive: 2063301632 AppDrive: 0 SysDrive: 2060471296
[060C:044C][2015-04-30T14:28:48]i000: MUX: ExecutePackageComplete for secondary installer
[060C:044C][2015-04-30T14:28:48]i000: MUX: Disconnecting secondary installer pipe
[060C:044C][2015-04-30T14:28:48]i000: MUX: Return Code:0x80048646 Msi Messages:Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294 Result Detail:0 Restart:None
[060C:044C][2015-04-30T14:28:48]i000: MUX: Set Result: Return Code=-2147187130 (0x80048646), Error Message=Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294, Result Detail=, Vital=False, Package
Action=Install, Package Id=VSSecondaryInstaller_box
[060C:044C][2015-04-30T14:28:48]i000: Setting string variable 'BundleResult' to value '0'
[060C:044C][2015-04-30T14:28:48]w350: Applied non-vital package: VSSecondaryInstaller_box, encountered error: 0x80048646. Continuing...
Think I'll go buy a Mac...

Known Issue: Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

Some users are receiving the following errors after Visual Studio setup completes
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Windows 10 SDK 10.0.10069 : The installer failed. User cancelled
installation. Error code: -2147023294

We've fixed this issue, and have released an update as of 7PM PDT 30 April 2015.
New installs of Visual Studio 2015 RC should expect to no longer encounter this problem, unless
you lose your internet connection during installation. (That is, this error now indicates that the Windows SDK or Windows Emulator setup invoked by Visual Studio setup has lost internet connectivity and cannot download necessary files.)
To fix the issue, re-run setup and select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile" again.
If you have already installed Visual Studio and encountered this problem, you can now modify your Visual Studio installation to successfully install.
Go to Program & Features, select Visual Studio 2015 RC, and select Change. Click
Modify, then select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile", and click
Update.
Note that "Universal Windows App Development Tools" will be already selected. This is expected. Keep it selected, and click
Update.
An alternate solution is to install the Windows 10 SDK and Windows Emulators separately. Go to
https://dev.windows.com/downloads/windows-10-developer-tools. Scroll to the bottom of the page and install
the Windows 10 SDK and Windows 10 emulators outside of Visual Studio setup.
Thanks!
-Paul

Error during installation of ECC6- system call failed

Dear all,
i encounter the error as below during sap installation. its looks like the ID issue, but this id (fbqadm) is using by me to log into the windows. please help me.
thank
ERROR      2009-03-17 10:07:25.583 [syxxsyshlp.cpp:78]
           syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (fbqadm, SAPFBWDEV01, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1014) in file (synxccuren.cpp).
TRACE      2009-03-17 10:07:25.813 [iaxxejsbas.hpp:408]
           handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE      2009-03-17 10:07:25.813
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException

problem fix after reboot the server

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error in installation with NW04S

Hi,
error : CJS-30196. SAPBC JSF Communication role is not assigned to the user SAPJSF.
i am getting the fallowing error in installation with NW04S. while trying to assign the above role to the user.any body help me with the solution.
Thanks & Regards
kiran.B

Hi,
Assign the Role <b>SAP_BC_JSF_COMMUNICATION_RO</b> to the profile of SAPJSF user in production client and restart the installation.
Regards,
Siddhesh

Error during installation of SAPNW ABAP 701SR1 SP3 trial version in phase 2

Hi,
I am trying to install SAPNW ABAP 701 SP3 trial version.I am getting error in phase 2
Running msiexec failed with return code 1603: Fatal error during installation.
I am installing on window vista.I have also checked the security setting for the user I am trying to install.It is adminstrator and have access for full control.
When I started the installation of sap it asked me for master password and that password is different from what I use to log on to windows.Could this be the reason for this problem or something else ?
Any help appreciated.
Thanks,
Rekha.

Install SAP MMC snap first and continue with old installation.... it will pass 2nd phase
thank you
Mohan

Fatal error during installation - Error 1603 ONLY on XP

My Dears,
while installing any CS3 or CS4 Adobe product for my friend, at ~90% of installation error comes up:
"Adobe Photoshop CS4
Error:
Error 1603. Fatal error during installation."
I am struggling to solve it for 3 days now, and of corse I have seen and tryied all things proposed in posts like this: http://forums.adobe.com/thread/373577 , but still nothing helps me.
Thats list of all things that I have tryied to do:
- CleanUp fix
- Uninstalling all Adobe before fix
- Turning Internet off fix
- Turning anti-vir things off fix
- Registery fix
- Starting from CLEAN new system fix
- Changing language from US to International fix
Still nothing. Probably thats the point of problem:
Current Situation:
Got ACER ASPIRE x3200 desktop width Windows Vista (preinstalled), did clean installation of Windows XP and dumped Vista
There is no official drivers for XP, but got cracked chipset driver and official nVidia 8200 driver for XP from Internet
Got all Service Packs
100% legal
If nothing is working, maybe thats becaouse of my PC?! Installed it on my laptop with Vista 32b - WORKS (it means that installation CD is not corruptet or something). But then I have tryied to install it on another laptop with XP PRO - fail as with my PC. It seems that Windows XP Pro is not good for CS3 or CS4, BUT it did months before in my old unbranded PC.
Help! I really want to install that stuff.
Best Regards,
Westmidlander

I was only speaking very generally... This is all common sense...
Adobe and other software makers are moving on from XP in their development. Thus XP becomes more and more troublesome to use as the likelihood of problems increases.
In the case of installation, a lot of very specific things are required of an installer so that it can work on Windows 7. The User Account Control (UAC) system and other security measures such as file permissions have to be completely and properly satisfied to install software on the newer systems. Indeed, the application itself even has to work differently to be compliant - reference the recent 12.0.2 issues with loading scanner drivers for example, or the fact that Photoshop needs to put some things under C:\Users\... now that always used to be put under C:\Program Files\Adobe\...
It's not hard to imagine that Adobe isn't testing software as thoroughly on XP as they once did either. Perhaps they missed one of the quirks of XP in pursuit of getting it to install properly on Windows 7.
You're putting a new cutting edge software application on an operating system designed nearly 10 years ago (an epoch in high tech). That you don't see even more problems is a testament to Adobe's committment to support XP.
-Noel

Visual C++ Fatal error during installation

When I was installing Titanfall on Origin I got a 1603 error. I looked at some forum posts on fixes.
I have uninstalled all of my VC++ from my computer and when i tried to download and install fresh copies every single one results in a fatal error durring installation.
OS Version = 5.1.2600, Platform 2, Service Pack 2
OS Description = WinXP - x64 Professional Service Pack 2
CommandLine = c:\9606a8ce2f11654507209809fa5c4d\Setup.exe
TimeZone = Mountain Standard Time
Initial LCID = 1033
Using Simultaneous Download and Install mechanism
Operation: Installing
Package Name = Microsoft Visual C++ 2010 x64 Redistributable Setup
Package Version = 10.0.30319
User Experience Data Collection Policy: UserControlled
Number of applicable items: 3
Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:00:13).

The error log is incorrect. I am using Windows 7 Pro.
I was able to install MS VC++ 2013 redist.(x64) and VC++ 2005 (x64) just fine but I cannot install 2010.
Eh? Never saw an install log where Win 7 was identified as Win XP x64.
What, exactly, are you trying to install? Are you installing Visual Studio, or C++ redistributables?
Please show the link to what you are trying to install, and provide your install logs as follows:
Please collect your install logs with this:
http://aka.ms/vscollect
After you run Collect.exe, you'll find vslogs.cab in your %temp% directory. Please upload vslogs.cab to a public site, like OneDrive, and post the link here.

Itunes 7.6 installation Fatal Error during installation

I successfully installed Itunes into my account - as the administrator. However, my other computer users users can't install the new version. The get a window that pops up: Problem with shortcut, fatal error during installation. I have tried removing and re-installing, I even followed all the steps in the trouble article #93976. I also deleted the user, created a new on, made that user an adminstrator and still can't install. HELP!

I found on another post that concerns this same topic that someone has responded with the following solution:
I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.
I have not tried it yet, but when I have the time to sit and actually do it, and if it works, I will definitely let you guys know!

Error in Installation of Aqualogic User Interaction 6.5

Similar Messages

Maybe you are looking for