Error in installation of Central Instance in Windows Cluster with Oracle
Hi!
If I try to continue with the installation of Central Instance of Cluster I get the following error:
The java load in database <sid>/<server> has already been configured.
Solution: remove the schema and load it with a new load before you run this installation
Can some one tell me how to proceed?
Thank you very much!
Regards
Thom
Thom,
Did you figure this one out?
Thanks
S.
Similar Messages
-
Error Intall RWD Uperform 4.3 on Windows 2008 with Oracle 11G
Hi,
I need install RWD Uperform 4.3 on Windows 2008 with Oracle 11G.
When tried install Uperform 4.3 occurs the next error:
Product: RWD uPerform Server -- This Release requires Oracle 11.2 R2 ODP Client to be Installed.
If you are not using Oracle, please use the regular 4.30.0 release.
If you are using Oracle, please install ODP.NET and then re-run the Setup. Setup will be aborted now.
I installed the ODP.NET whit the version 11.2.0.2.
But the errors still occur.
Thanks.
Marco KolombeskyIn the end I solved my problem.
But I installed RWD uperform 4.4 (not 4.3).
But I think that the problem was that when I installed uperform 4.3 I didn't run this command at DB level on my SQL Server datadabe:
ALTER DATABASE AdventureWorks2008R2
SET READ_COMMITTED_SNAPSHOT ON;
GO
Regards
Matteo Stocco -
Unicode WAS Central Instance on Windows Server 2003.
Hi
I'm trying to install the WAS (Component of Netweaver) Central Instance (MS SQL 2000 DB) on Windows Server 2003. Less than a minute into the installation, I get the following error.
Transaction begin ********************************************************
ERROR 2016-11-25 01:07:10
MDB-05036 Error when creating sqldmo SqlServer object
ERROR 2016-11-25 01:07:10
MDB-05034 Call to a threaded function returned "1".
Transaction end **********************************************************
Can someone please help resolve it?
Appreciate all help. Thank U.
Rajendra.Hi Mahendra,
I guess it depends wether you want to have ABAP only, or j2ee stack as well.
The J2ee stack over multiple OS (read J2EE SDK's) for CI and Dialog instances is not supported.
There is a note about it, but i do not have the number right now.
Björn -
Central instance on Windows , DB instance on UNIX
Hi,
Client wanted to install ECC6 implementation on hetrogeneous environment. Database instalnce on HP-UX , Central instance on Windows2003. I know that technically it is possible but it is very complex . My questions is do we face any problems during installation / after that installation. What about future upgradation ? how simple ? what are the disadvantages if we select this senario.Also license ,software download on windows/unix We need to put all this to client .
Please suggest.
Thanks in advance
KristeneHi Kristene,
from my point of view it is not more complex as any other heterogeneous three tier installation. I think the most important question for you should be "What is the motivation of your client to choose this combination?".
The advantages are probably good performance for a low price. The Windows application servers leverage a very good performance but they does not scale as good as some Unix flavors. My recommendation would be to use 4 CPUs with or without dual Core technology and 16-32GB of Memory. On the other hand you have a scalable database server with HP-UX (at least you can get one from HP - probably not as cheap as the Windows servers).
The disadvantages are that you have a inhomogeneous environment and you need knowledge for two platforms. You may be run into problems because the combination is not as well tested as others. But this is only a small risk, because you and I don't know how well which combinations gets tested. May be your target combination is not as extra ordinary as you expect.
From a license perspective or upgrade path you'll have no problem. But, you may be should ask HP which of the available CPUs you should choose. I would assume that Itanium is preferred by HP, but I can be wrong. Also on Windows you may be should ask which CPU you should use (Core 2, AMD or Itanium). I personally wouldn't choose Itanium for Windows (price / performance and unknown availability of Windows for Itanium in the future).
Best regards
Ralph Ganszky -
Installation of central instance - memory settings
Hi All,
I have a question about the memory settings reg. the ABAP / Java Add-In installation (Central system).
Installation of CI:
When I install the central instance, I provide a value for the Instance Memory Management.
Installation of DI:
In the step where I install the database instance, I provide again a value for Instance Memory.
Q1: The memory value for the Central instance later is visible in the profile for the CI. But where does the DI value go? How could I change it?
Q2: The value for the Java JVM (heap size) - is this value additional to the value of the CI, or part of the CI's memory. So could I set heap size to 2M while the CI's memory is set to 1M?
Any hints are appreciated.
Thx.
KB
System
- Win2K (Win32)
- OracleQ1: The memory value for the Central instance later is visible in the profile for the CI. But where does the DI value go? How could I change it?
--> You can ignore this, there is no INSTANCE memory for your database. If you want to configure the memory settings for your RDBMS software it'll depend on what software it is... For Sql Server it's in the Enterprise Manager in Oracle you can edit the init<SID>.ora file...
Q2: The value for the Java JVM (heap size) - is this value additional to the value of the CI, or part of the CI's memory. So could I set heap size to 2M while the CI's memory is set to 1M?
--> This value is specific to your JVM heap, so it's not additive or related to your CI. -
Installation of central instance - are these warnings critical?
NW04 ABAP stack:
Installing the central instance I get some warnings, mostly that some files are not found. When I check theses files all are in the mentioned place.
Any ideas why I get these message?
Also some warning with the IGS which does not mean anything to me.
Any hints will be appreciated.
Thx
The log messages
Error converting from service name=sapmsN02/protocol=tcp to port number. SAPRETURN=12
WARNING[E] 2005-03-09 15:46:48
Error converting from service name=sapmsN02/protocol=tcp to port number. SAPRETURN=12
WARNING[E] 2005-03-09 15:47:35
Error converting from service name=sapmsN02/protocol=tcp to port number. SAPRETURN=12
WARNING 2005-03-09 17:29:48
Error 2 (The system cannot find the file specified.
) in execution of a 'GetFileVersionInfoSize' function, line (71), with parameter (C:\WINNT\system32/sapmmc.dll).
WARNING 2005-03-09 17:29:49
Error 2 (The system cannot find the file specified.
) in execution of a 'GetFileVersionInfoSize' function, line (71), with parameter (C:\WINNT\system32/sapmmcada.dll).
WARNING 2005-03-09 17:29:49
Error 2 (The system cannot find the file specified.
) in execution of a 'GetFileVersionInfoSize' function, line (71), with parameter (C:\WINNT\system32/sapmmcdb6.dll).
WARNING 2005-03-09 17:29:49
Error 2 (The system cannot find the file specified.
) in execution of a 'GetFileVersionInfoSize' function, line (71), with parameter (C:\WINNT\system32/sapmmcinf.dll).
WARNING 2005-03-09 17:29:49
Error 2 (The system cannot find the file specified.
) in execution of a 'GetFileVersionInfoSize' function, line (71), with parameter (C:\WINNT\system32/sapmmcms.dll).
WARNING 2005-03-09 17:29:59
Error 2 (The system cannot find the file specified.
) in execution of a 'RegQueryValueEx' function, line (114), with parameter (DisplayName).
WARNING 2005-03-09 17:29:59
Error 2 (The system cannot find the file specified.
) in execution of a 'RegQueryValueEx' function, line (114), with parameter (UninstallString).
WARNING 2005-03-09 17:29:59
Error 2 (The system cannot find the file specified.
) in execution of a 'RegQueryValueEx' function, line (114), with parameter (InstallLocation).
WARNING 2005-03-09 17:29:59
Error 2 (The system cannot find the file specified.
) in execution of a 'RegQueryValueEx' function, line (114), with parameter (Publisher).
WARNING 2005-03-09 17:31:08
Execution of the command "E:\usr\sap/N02/DVEBMGS00/igs/bin/igswd.exe 'E:\usr\sap\N02\DVEBMGS00\igs' '-c' '-tracelevel=0' '-recontime=60' '-mux=GPDGD1J,40000' '-listenerhttp=40080' '-portwatcher=40001' '-portwatcher=40002' '-listenerrfc=IGS.N02,GPDGD1J,sapgw00'" finished with return code 1. Output:Hi, Klaus Basan.
I have same install error ploblem at Sap WebAS 6.20
with SQL Server/WinNT5.0.
Have you already solved this problem ?
if so, Please tell me that answer.
please answer directly to my e-mail address.
[email protected]
best regards,
Ryohei Tambo, IBCS, Japan. -
Central Instance on Windows, Dialog Instance on HP-UX
Hi,
Is it possible to have Central Instance installed on Windows 2003 and Dialog Instance on HP-UX 11.23?
Thanks
MahendraHi Mahendra,
I guess it depends wether you want to have ABAP only, or j2ee stack as well.
The J2ee stack over multiple OS (read J2EE SDK's) for CI and Dialog instances is not supported.
There is a note about it, but i do not have the number right now.
Björn -
The program will not start because MSVCR80.dll is missing. I am trying to unistall I tunes and then reinstall it because the latest upgrade did not work. I was able to remove "Itunes" and "apple Software update' but when I tried to remove "Apple mobile device support" I get a "fatal error during installation" message.
First try a repair install of Apple Mobile Device Support. If that goes through successfully, restart the PC and see if you can now uninstall Apple Mobile Device Support.
If the Repair install doesn't help, try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
Fix problems with programs that can't be installed or uninstalled -
Error during installation of JDeveloper 11g (which is bundled with WebLogic
Hi,
I just downloaded Oracle JDeveloper 11g (Build 5188). During installation I'm beeing asked what to install and then I choose a complete installation which includes:
-JDeveloper and ADF
-WebLogic Server
When the installation reaches 42% I get a popup window with the following error message:
Fatal error encountered during file installation. The installer will now cleanup and exit!
C:\Oracle\Middleware\wlserver_10.3\server\bin\beaexec.exe
(Access denied)
I am beeing loged on as the Administrator.
OS beeing used is Windows XP
Any idea?hi,
Did you find a sollution to your problem??
I just got same error message and have no clue what to do....
shh. -
Java gets error pki-02002 accessing wallet on windows 2008 with Oracle 12 only
I have a windows 2008 server with Oracle 12 client installed and I can't figure out what is preventing me from running java commands that use the wallet. The wallet itself seems to be fine as I can log in with SQLPLUS using the wallet, it is only when I try to run a java command that it fails with a PKI-02002 error.
Also - I can run the same command line without error with oracle 11 installed, so it seems to be something that differs between oracle 11 and 12. Any ideas of what I should look for? I've checked permissions on
Here is the error:
java.sql.SQLException: encountered a problem with the Secret Store. Check the wallet location for the presence of an open wallet (cwallet.sso) and ensure that this wallet contains the correct credentials using the mkstore utility: java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
at oracle.jdbc.driver.PhysicalConnection.getSecretStoreCredentials(PhysicalConnection.java:3048)
Exiting program...Hi,
I am having exactly the same problem. Did you ever come to a resolution on this problem???
Thanks,
Darren -
Should user sessions be routed to Central Instance JVM in cluster?
Our production portal is clustered and we have eight JVMs. Is it a problem if we route user requests to the central instance JVM in the portal or should this instance be left to provide services to the other JVMs in the cluster?
Hi Timothy,
It is Ok to route traffic to the JVM on the central instance. Probably the main reason not to route traffic there is the possibility of a request taking down the central instance requiring (hopefully) a failover. (worst case portal down) My personal preference is if you have enough capacity on the other servers, don't route request to the central instance especially if you don't have a failover scenario for the central instance.
What you may want to consider is not routing to the central instance but if you loose one of the other server nodes, have the load balance use the central instance for the failover till the node is restarted.
Hope this helps,
John -
Installation of SAPCCM4X-Agent on Windows Cluster
Hi!
I woulld like to install SAPCCM4X-Agent on Windows Cluster.
Does anyone know the procedure here (e.g. install the agent twice on both nodes, etc.)...
Thank you very much!
regards
ThomHello Thom,
Here is a note that will help you out.
SAP Note 536954 - OS data in a cluster environment for OS07
As per the note
The CCMS agent must be located on a shared disk, so that the cluster administrator software can start the service later.
Regards,
Siddhesh
Edited by: Siddhesh Ghag on May 27, 2008 11:02 AM -
Problems dual booting Windows Vista with Oracle Enterprise Linux 4
I tried dual booting my sony laptop which came pre installed with windows Vista,After a successful installation,windows Vista boots fine,but Oracle enterprise linux just stops booting at this point " Starting Udev...................................................(OK)
Initializing hardware....Storage network"
It's posibly a hardware compatibility problem but I dont know why I get stuck at this point.Can anyone help please?hi,
r u getting this error while installing oel or after installation?
which version of oel u r installing?
u may get this error probably due to hard disk (usually sata) compatility with linux.
--Regards
Xaheer -
Oracle on windows cluster, with failsafe installed. Can it be switched live
Hi all
We have a oracle database, 10.2.0.4, installed on a 2 node Windows cluster (2003 R2 64 bit). Only one node is the active node. On top of this Failsafe is installed.
Oracle is used for SAP.
Normally when I need to switch the Oracle database from node1 to node2 I follow this procedure:
1 bring down SAP
2 set the database offline
3 switch the Oracle database using failsafe
4 set the database online
5 start sap
Being a hospital we just want to have SAP up all the time, this procedure only takes 20 min but I wondered if the switch could be done live
So just go into the failsafe manager and switch, (won't do it in prime time of course)
Can this live switch result in a corrupt database?
Thanks for replyingHi,
to do it really life you need another technology than a "failover cluster". You can use RAC for this.
A failover cluster itself needs to be sure that the stack is down, before bringing it up on the other side. If not this can leed to corruptions... (though Oracle will try to prevent them in most cases)...
Regards
Sebastian -
Installation problem: Central Instance 6.40 Oracle on Linux 32
Hi everybody, I ran into some basic problems with an installation on Redhat EL4 with SUN SDK 1.4.2_12
here is where sapinst stops after selecting the java dvd:
somehow the getting the right Java home seems to be the problem, although environment variables are set...
SAPinst component stack:
========================
Preinstall|ind|ind|ind|ind|ind|0
Current script:
===============
if (!context.getBool("ci") && !context.getBool("di") && !installer.onWindows()) {
// we are running on Unix. We need JAVA_HOME for the user creation only.
WebAS.restore(context.get("WebASDump"));
var webas = new WebAS({sid:context.get("SID"), j2eeStandalone:context.getBool("standalone")});
if (webas.getAccountData(WebAS.SIDAdm).exists) {
return;
if (context.get("JAVA_HOME") == "") {
if (installer.onOS400()) {
installer.getCD("J2EE");
context.set( "JAVA_HOME", os400_getJavaHome() );
} else {
var versions = Java.readVersionFile(installer.getCD("J2EE"));
context.set("JAVA_HOME", Java.getBestHome(versions.minVersion, versions.maxVersion));
here the sapinst_dev.log:
TRACE [sapinst.cpp:285]
CSapInst::initMessaging()
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE[E] [syxxcfsmgt.cpp:269]
CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE [iaxxccontrolfile.cpp:344]
CControlFile::getMessageFilePath()
Running with messages from /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
TRACE [sapinst.cpp:306]
CSapInst::initMessaging()
This is SAPinst, version 642, build 703609
compiled on Nov 21 2004, 20:12:45
TRACE [sapinst.cpp:311]
CSapInst::initMessaging()
Gui connected by user root from host localhost
TRACE [syuxcgroup.cpp:528]
bool CSyUserImpl::isExistingOnOS()
checking existence of account group="root" gid="0" succeeded with true.
TRACE [syxxccache.cpp:208]
CSyAccountCache::getGroupImpl(name="", sid="0", create=false, ISyProgressObserver* )
inserted account (root, 0, GROUP) into the accountcache.
TRACE [syxxsyshlp.cpp:133]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
SSH_AGENT_PID = 3137
HOSTNAME = localhost
TERM = xterm
SHELL = /bin/bash
DESKTOP_STARTUP_ID =
HISTSIZE = 1000
GTK_RC_FILES = /etc/gtk/gtkrc:/root/.gtkrc-1.2-gnome2
WINDOWID = 35655351
SAPINST_EXEDIR_CD = .
QTDIR = /usr/lib/qt-3.3
USER = root
JRE_HOME = /usr/java/j2sdk1.4.2_12/jre
LD_LIBRARY_PATH = /tmp/sapinst_exe.3669.1153729381
LS_COLORS = no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
SSH_AUTH_SOCK = /tmp/ssh-WtPWyH3136/agent.3136
GNOME_KEYRING_SOCKET = /tmp/keyring-MMmk9C/socket
KDEDIR = /usr
SESSION_MANAGER = local/localhost:/tmp/.ICE-unix/3109
PATH = /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/java/j2sdk1.4.2_12/bin:/root/bin
DESKTOP_SESSION = default
MAIL = /var/spool/mail/root
JAVA_BINDIR = /usr/java/j2sdk1.4.2_12/bin
PWD = /root/backupmnt/temp/SAPWAS640LinuxOracle/32bitInstall/DVD_NW_04_SR1_Installation_Master/IM09_LINUX_32/SAPINST/UNIX/LINUX_32
INPUTRC = /etc/inputrc
JAVA_HOME = /usr/java/j2sdk1.4.2_12
LANG = en_US.UTF-8
SAPINST_EXE_DIR = /tmp/sapinst_exe.3669.1153729381
JAVA_VERSION = 1.4.2_12
GDMSESSION = default
SSH_ASKPASS = /usr/libexec/openssh/gnome-ssh-askpass
SHLVL = 2
HOME = /root
JDK_HOME = /usr/java/j2sdk1.4.2_12
GNOME_DESKTOP_SESSION_ID = Default
LOGNAME = root
DBUS_SESSION_BUS_ADDRESS = unix:abstract=/tmp/dbus-KeIbVNuZM7
LESSOPEN = |/usr/bin/lesspipe.sh %s
DISPLAY = :0.0
G_BROKEN_FILENAMES = 1
XAUTHORITY = /root/.Xauthority
COLORTERM = gnome-terminal
User: root, Id: 0
Effective user: root, Id: 0
Group: root, Id: 0
Effective group: root, Id: 0
Umask: 022
Resource Limits
===============
RLIMIT_CPU: maximum amount of CPU time in seconds current: unlimited maximum: unlimited
RLIMIT_FSIZE: maximum size of a file in bytes that may be created by a process current: unlimited maximum: unlimited
RLIMIT_DATA: maximum size of a process's heap in bytes current: unlimited maximum: unlimited
RLIMIT_STACK: maximum size of a process's stack in bytes current: 10485760 maximum: unlimited
RLIMIT_CORE: maximum size of a core file in bytes current: unlimited maximum: unlimited
RLIMIT_MEMLOCK: Locked-in-memory addess space. current: 32768 maximum: 32768
RLIMIT_NOFILE: one more than the maximum value that the system may assign to a newly created descriptor current: 1024 maximum: 1024
RLIMIT_OFILE: one more than the maximum value that the system may assign to a newly created descriptor current: 1024 maximum: 1024
RLIMIT_NPROC: maximum number of child processes per real user ID current: 13184 maximum: 13184
RLIMIT_RSS: maximum resident set size in bytes current: unlimited maximum: unlimited
RLIMIT_AS: maximum size of a process's total available memory, in bytes current: unlimited maximum: unlimited
Working directory: /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
TRACE [syuxctask.cpp:1242]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 3705
TRACE [syxxsyshlp.cpp:143]
syslib::logSystemState()
System information
==================
uname: Linux localhost 2.6.9-11.EL #1 Fri May 20 18:17:57 EDT 2005 i686 i686 i386 GNU/Linux
RAM size (MB): 813.152
Swap size (MB): 258.852
Kernel Parameters:
==================
dev.cdrom.autoclose = 1
dev.cdrom.autoeject = 0
dev.cdrom.check_media = 0
dev.cdrom.debug = 0
dev.cdrom.info = CD-ROM information, Id: cdrom.c 3.20 2003/12/17
dev.cdrom.lock = 1
dev.parport.default.spintime = 500
dev.parport.default.timeslice = 200
dev.parport.parport0.autoprobe =
dev.parport.parport0.autoprobe0 =
dev.parport.parport0.autoprobe1 =
dev.parport.parport0.autoprobe2 =
dev.parport.parport0.autoprobe3 =
dev.parport.parport0.base-addr = 888 1912
dev.parport.parport0.devices.active = none
dev.parport.parport0.devices.lp.timeslice = 200
dev.parport.parport0.dma = -1
dev.parport.parport0.irq = -1
dev.parport.parport0.modes = PCSPP,TRISTATE
dev.parport.parport0.spintime = 500
dev.raid.speed_limit_max = 200000
dev.raid.speed_limit_min = 1000
dev.rtc.max-user-freq = 64
dev.scsi.logging_level = 0
fs.aio-max-nr = 65536
fs.aio-nr = 0
fs.binfmt_misc.register =
fs.binfmt_misc.status = enabled
fs.dentry-state = 22755 20214 45 0 0 0
fs.dir-notify-enable = 1
fs.file-max = 82562
fs.file-nr = 2480 0 82562
fs.inode-nr = 17270 1015
fs.inode-state = 17270 1015 0 0 0 0 0
fs.lease-break-time = 45
fs.leases-enable = 1
fs.mqueue.msg_max = 10
fs.mqueue.msgsize_max = 8192
fs.mqueue.queues_max = 256
fs.overflowgid = 65534
fs.overflowuid = 65534
fs.quota.allocated_dquots = 0
fs.quota.cache_hits = 0
fs.quota.drops = 0
fs.quota.free_dquots = 0
fs.quota.lookups = 0
fs.quota.reads = 0
fs.quota.syncs = 20
fs.quota.writes = 0
kernel.acct = 4 2 30
kernel.cad_pid = 1
kernel.cap-bound = -257
kernel.core_pattern = core
kernel.core_uses_pid = 1
kernel.ctrl-alt-del = 0
kernel.domainname = (none)
kernel.exec-shield = 1
kernel.exec-shield-randomize = 1
kernel.hostname = localhost
kernel.hotplug = /sbin/hotplug
kernel.modprobe = /sbin/modprobe
kernel.msgmax = 8192
kernel.msgmnb = 16384
kernel.msgmni = 16
kernel.ngroups_max = 65536
kernel.osrelease = 2.6.9-11.EL
kernel.ostype = Linux
kernel.overflowgid = 65534
kernel.overflowuid = 65534
kernel.panic = 0
kernel.panic_on_oops = 1
kernel.pid_max = 32768
kernel.print-fatal-signals = 0
kernel.printk = 6 4 1 7
kernel.printk_ratelimit = 5
kernel.printk_ratelimit_burst = 10
kernel.pty.max = 4096
kernel.pty.nr = 3
kernel.random.boot_id = 906671fa-2e46-4253-b860-368e36266a3a
kernel.random.entropy_avail = 3968
kernel.random.poolsize = 512
kernel.random.read_wakeup_threshold = 64
kernel.random.uuid = 32d988a2-1496-4f14-93ac-ff43f88ff37d
kernel.random.write_wakeup_threshold = 128
kernel.real-root-dev = 0
kernel.sem = 250 32000 32 128
kernel.shmall = 2097152
kernel.shmmax = 33554432
kernel.shmmni = 4096
kernel.suid_dumpable = 0
kernel.sysrq = 0
kernel.tainted = 1
kernel.threads-max = 26368
kernel.vdso = 0
kernel.version = #1 Fri May 20 18:17:57 EDT 2005
net.core.dev_weight = 64
net.core.divert_version = 0.46
net.core.lo_cong = 100
net.core.message_burst = 10
net.core.message_cost = 5
net.core.mod_cong = 290
net.core.netdev_max_backlog = 300
net.core.no_cong = 20
net.core.no_cong_thresh = 10
net.core.optmem_max = 10240
net.core.rmem_default = 110592
net.core.rmem_max = 131071
net.core.somaxconn = 128
net.core.wmem_default = 110592
net.core.wmem_max = 131071
net.ipv4.conf.all.accept_redirects = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.arp_announce = 0
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.all.arp_ignore = 0
net.ipv4.conf.all.bootp_relay = 0
net.ipv4.conf.all.disable_policy = 0
net.ipv4.conf.all.disable_xfrm = 0
net.ipv4.conf.all.force_igmp_version = 0
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.all.mc_forwarding = 0
net.ipv4.conf.all.medium_id = 0
net.ipv4.conf.all.proxy_arp = 0
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.all.secure_redirects = 1
net.ipv4.conf.all.send_redirects = 1
net.ipv4.conf.all.shared_media = 1
net.ipv4.conf.all.tag = 0
net.ipv4.conf.default.accept_redirects = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.default.arp_announce = 0
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.default.arp_ignore = 0
net.ipv4.conf.default.bootp_relay = 0
net.ipv4.conf.default.disable_policy = 0
net.ipv4.conf.default.disable_xfrm = 0
net.ipv4.conf.default.force_igmp_version = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.default.log_martians = 0
net.ipv4.conf.default.mc_forwarding = 0
net.ipv4.conf.default.medium_id = 0
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.secure_redirects = 1
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.default.shared_media = 1
net.ipv4.conf.default.tag = 0
net.ipv4.conf.eth0.accept_redirects = 1
net.ipv4.conf.eth0.accept_source_route = 0
net.ipv4.conf.eth0.arp_announce = 0
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth0.arp_ignore = 0
net.ipv4.conf.eth0.bootp_relay = 0
net.ipv4.conf.eth0.disable_policy = 0
net.ipv4.conf.eth0.disable_xfrm = 0
net.ipv4.conf.eth0.force_igmp_version = 0
net.ipv4.conf.eth0.forwarding = 0
net.ipv4.conf.eth0.log_martians = 0
net.ipv4.conf.eth0.mc_forwarding = 0
net.ipv4.conf.eth0.medium_id = 0
net.ipv4.conf.eth0.proxy_arp = 0
net.ipv4.conf.eth0.rp_filter = 1
net.ipv4.conf.eth0.secure_redirects = 1
net.ipv4.conf.eth0.send_redirects = 1
net.ipv4.conf.eth0.shared_media = 1
net.ipv4.conf.eth0.tag = 0
net.ipv4.conf.lo.accept_redirects = 1
net.ipv4.conf.lo.accept_source_route = 1
net.ipv4.conf.lo.arp_announce = 0
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.lo.arp_ignore = 0
net.ipv4.conf.lo.bootp_relay = 0
net.ipv4.conf.lo.disable_policy = 1
net.ipv4.conf.lo.disable_xfrm = 1
net.ipv4.conf.lo.force_igmp_version = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.lo.log_martians = 0
net.ipv4.conf.lo.mc_forwarding = 0
net.ipv4.conf.lo.medium_id = 0
net.ipv4.conf.lo.proxy_arp = 0
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.lo.secure_redirects = 1
net.ipv4.conf.lo.send_redirects = 1
net.ipv4.conf.lo.shared_media = 1
net.ipv4.conf.lo.tag = 0
net.ipv4.icmp_echo_ignore_all = 0
net.ipv4.icmp_echo_ignore_broadcasts = 0
net.ipv4.icmp_ignore_bogus_error_responses = 0
net.ipv4.icmp_ratelimit = 1000
net.ipv4.icmp_ratemask = 6168
net.ipv4.igmp_max_memberships = 20
net.ipv4.igmp_max_msf = 10
net.ipv4.inet_peer_gc_maxtime = 120
net.ipv4.inet_peer_gc_mintime = 10
net.ipv4.inet_peer_maxttl = 600
net.ipv4.inet_peer_minttl = 120
net.ipv4.inet_peer_threshold = 65664
net.ipv4.ip_autoconfig = 0
net.ipv4.ip_default_ttl = 64
net.ipv4.ip_dynaddr = 0
net.ipv4.ip_forward = 0
net.ipv4.ip_local_port_range = 32768 61000
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.ip_nonlocal_bind = 0
net.ipv4.ipfrag_high_thresh = 262144
net.ipv4.ipfrag_low_thresh = 196608
net.ipv4.ipfrag_secret_interval = 600
net.ipv4.ipfrag_time = 30
net.ipv4.neigh.default.anycast_delay = 99
net.ipv4.neigh.default.app_solicit = 0
net.ipv4.neigh.default.base_reachable_time = 30
net.ipv4.neigh.default.delay_first_probe_time = 5
net.ipv4.neigh.default.gc_interval = 30
net.ipv4.neigh.default.gc_stale_time = 60
net.ipv4.neigh.default.gc_thresh1 = 128
net.ipv4.neigh.default.gc_thresh2 = 512
net.ipv4.neigh.default.gc_thresh3 = 1024
net.ipv4.neigh.default.locktime = 99
net.ipv4.neigh.default.mcast_solicit = 3
net.ipv4.neigh.default.proxy_delay = 79
net.ipv4.neigh.default.proxy_qlen = 64
net.ipv4.neigh.default.retrans_time = 99
net.ipv4.neigh.default.ucast_solicit = 3
net.ipv4.neigh.default.unres_qlen = 3
net.ipv4.neigh.eth0.anycast_delay = 99
net.ipv4.neigh.eth0.app_solicit = 0
net.ipv4.neigh.eth0.base_reachable_time = 30
net.ipv4.neigh.eth0.delay_first_probe_time = 5
net.ipv4.neigh.eth0.gc_stale_time = 60
net.ipv4.neigh.eth0.locktime = 99
net.ipv4.neigh.eth0.mcast_solicit = 3
net.ipv4.neigh.eth0.proxy_delay = 79
net.ipv4.neigh.eth0.proxy_qlen = 64
net.ipv4.neigh.eth0.retrans_time = 99
net.ipv4.neigh.eth0.ucast_solicit = 3
net.ipv4.neigh.eth0.unres_qlen = 3
net.ipv4.neigh.lo.anycast_delay = 99
net.ipv4.neigh.lo.app_solicit = 0
net.ipv4.neigh.lo.base_reachable_time = 30
net.ipv4.neigh.lo.delay_first_probe_time = 5
net.ipv4.neigh.lo.gc_stale_time = 60
net.ipv4.neigh.lo.locktime = 99
net.ipv4.neigh.lo.mcast_solicit = 3
net.ipv4.neigh.lo.proxy_delay = 79
net.ipv4.neigh.lo.proxy_qlen = 64
net.ipv4.neigh.lo.retrans_time = 99
net.ipv4.neigh.lo.ucast_solicit = 3
net.ipv4.neigh.lo.unres_qlen = 3
net.ipv4.route.error_burst = 5000
net.ipv4.route.error_cost = 1000
net.ipv4.route.flush =
net.ipv4.route.gc_elasticity = 8
net.ipv4.route.gc_interval = 60
net.ipv4.route.gc_min_interval = 0
net.ipv4.route.gc_thresh = 2048
net.ipv4.route.gc_timeout = 300
net.ipv4.route.max_delay = 10
net.ipv4.route.max_size = 32768
net.ipv4.route.min_adv_mss = 256
net.ipv4.route.min_delay = 2
net.ipv4.route.min_pmtu = 552
net.ipv4.route.mtu_expires = 600
net.ipv4.route.redirect_load = 20
net.ipv4.route.redirect_number = 9
net.ipv4.route.redirect_silence = 20480
net.ipv4.route.secret_interval = 600
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_adv_win_scale = 2
net.ipv4.tcp_app_win = 31
net.ipv4.tcp_bic = 1
net.ipv4.tcp_bic_beta = 819
net.ipv4.tcp_bic_fast_convergence = 1
net.ipv4.tcp_bic_low_window = 14
net.ipv4.tcp_dsack = 1
net.ipv4.tcp_ecn = 0
net.ipv4.tcp_fack = 1
net.ipv4.tcp_fin_timeout = 60
net.ipv4.tcp_frto = 0
net.ipv4.tcp_keepalive_intvl = 75
net.ipv4.tcp_keepalive_probes = 9
net.ipv4.tcp_keepalive_time = 7200
net.ipv4.tcp_low_latency = 0
net.ipv4.tcp_max_orphans = 65536
net.ipv4.tcp_max_syn_backlog = 1024
net.ipv4.tcp_max_tw_buckets = 180000
net.ipv4.tcp_mem = 196608 262144 393216
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_no_metrics_save = 0
net.ipv4.tcp_orphan_retries = 0
net.ipv4.tcp_reordering = 3
net.ipv4.tcp_retrans_collapse = 1
net.ipv4.tcp_retries1 = 3
net.ipv4.tcp_retries2 = 15
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_rmem = 4096 87380 174760
net.ipv4.tcp_sack = 1
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_syn_retries = 5
net.ipv4.tcp_synack_retries = 5
net.ipv4.tcp_syncookies = 0
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_tso_win_divisor = 8
net.ipv4.tcp_tw_recycle = 0
net.ipv4.tcp_tw_reuse = 0
net.ipv4.tcp_vegas_alpha = 2
net.ipv4.tcp_vegas_beta = 6
net.ipv4.tcp_vegas_cong_avoid = 0
net.ipv4.tcp_vegas_gamma = 2
net.ipv4.tcp_westwood = 0
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_wmem = 4096 16384 131072
net.ipv6.bindv6only = 0
net.ipv6.conf.all.accept_ra = 1
net.ipv6.conf.all.accept_redirects = 1
net.ipv6.conf.all.autoconf = 1
net.ipv6.conf.all.dad_transmits = 1
net.ipv6.conf.all.force_mld_version = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.all.hop_limit = 64
net.ipv6.conf.all.max_addresses = 16
net.ipv6.conf.all.max_desync_factor = 600
net.ipv6.conf.all.mtu = 1280
net.ipv6.conf.all.regen_max_retry = 5
net.ipv6.conf.all.router_solicitation_delay = 1
net.ipv6.conf.all.router_solicitation_interval = 4
net.ipv6.conf.all.router_solicitations = 3
net.ipv6.conf.all.temp_prefered_lft = 86400
net.ipv6.conf.all.temp_valid_lft = 604800
net.ipv6.conf.all.use_tempaddr = 0
net.ipv6.conf.default.accept_ra = 1
net.ipv6.conf.default.accept_redirects = 1
net.ipv6.conf.default.autoconf = 1
net.ipv6.conf.default.dad_transmits = 1
net.ipv6.conf.default.force_mld_version = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.default.hop_limit = 64
net.ipv6.conf.default.max_addresses = 16
net.ipv6.conf.default.max_desync_factor = 600
net.ipv6.conf.default.mtu = 1280
net.ipv6.conf.default.regen_max_retry = 5
net.ipv6.conf.default.router_solicitation_delay = 1
net.ipv6.conf.default.router_solicitation_interval = 4
net.ipv6.conf.default.router_solicitations = 3
net.ipv6.conf.default.temp_prefered_lft = 86400
net.ipv6.conf.default.temp_valid_lft = 604800
net.ipv6.conf.default.use_tempaddr = 0
net.ipv6.conf.eth0.accept_ra = 1
net.ipv6.conf.eth0.accept_redirects = 1
net.ipv6.conf.eth0.autoconf = 1
net.ipv6.conf.eth0.dad_transmits = 1
net.ipv6.conf.eth0.force_mld_version = 0
net.ipv6.conf.eth0.forwarding = 0
net.ipv6.conf.eth0.hop_limit = 64
net.ipv6.conf.eth0.max_addresses = 16
net.ipv6.conf.eth0.max_desync_factor = 600
net.ipv6.conf.eth0.mtu = 1500
net.ipv6.conf.eth0.regen_max_retry = 5
net.ipv6.conf.eth0.router_solicitation_delay = 1
net.ipv6.conf.eth0.router_solicitation_interval = 4
net.ipv6.conf.eth0.router_solicitations = 3
net.ipv6.conf.eth0.temp_prefered_lft = 86400
net.ipv6.conf.eth0.temp_valid_lft = 604800
net.ipv6.conf.eth0.use_tempaddr = 0
net.ipv6.conf.lo.accept_ra = 1
net.ipv6.conf.lo.accept_redirects = 1
net.ipv6.conf.lo.autoconf = 1
net.ipv6.conf.lo.dad_transmits = 1
net.ipv6.conf.lo.force_mld_version = 0
net.ipv6.conf.lo.forwarding = 0
net.ipv6.conf.lo.hop_limit = 64
net.ipv6.conf.lo.max_addresses = 16
net.ipv6.conf.lo.max_desync_factor = 600
net.ipv6.conf.lo.mtu = 16436
net.ipv6.conf.lo.regen_max_retry = 5
net.ipv6.conf.lo.router_solicitation_delay = 1
net.ipv6.conf.lo.router_solicitation_interval = 4
net.ipv6.conf.lo.router_solicitations = 3
net.ipv6.conf.lo.temp_prefered_lft = 86400
net.ipv6.conf.lo.temp_valid_lft = 604800
net.ipv6.conf.lo.use_tempaddr = -1
net.ipv6.icmp.ratelimit = 1000
net.ipv6.ip6frag_high_thresh = 262144
net.ipv6.ip6frag_low_thresh = 196608
net.ipv6.ip6frag_secret_interval = 600
net.ipv6.ip6frag_time = 60
net.ipv6.mld_max_msf = 10
net.ipv6.neigh.default.anycast_delay = 99
net.ipv6.neigh.default.app_solicit = 0
net.ipv6.neigh.default.base_reachable_time = 30
net.ipv6.neigh.default.delay_first_probe_time = 5
net.ipv6.neigh.default.gc_interval = 30
net.ipv6.neigh.default.gc_stale_time = 60
net.ipv6.neigh.default.gc_thresh1 = 128
net.ipv6.neigh.default.gc_thresh2 = 512
net.ipv6.neigh.default.gc_thresh3 = 1024
net.ipv6.neigh.default.locktime = 0
net.ipv6.neigh.default.mcast_solicit = 3
net.ipv6.neigh.default.proxy_delay = 79
net.ipv6.neigh.default.proxy_qlen = 64
net.ipv6.neigh.default.retrans_time = 1000
net.ipv6.neigh.default.ucast_solicit = 3
net.ipv6.neigh.default.unres_qlen = 3
net.ipv6.neigh.eth0.anycast_delay = 99
net.ipv6.neigh.eth0.app_solicit = 0
net.ipv6.neigh.eth0.base_reachable_time = 30
net.ipv6.neigh.eth0.delay_first_probe_time = 5
net.ipv6.neigh.eth0.gc_stale_time = 60
net.ipv6.neigh.eth0.locktime = 0
net.ipv6.neigh.eth0.mcast_solicit = 3
net.ipv6.neigh.eth0.proxy_delay = 79
net.ipv6.neigh.eth0.proxy_qlen = 64
net.ipv6.neigh.eth0.retrans_time = 1000
net.ipv6.neigh.eth0.ucast_solicit = 3
net.ipv6.neigh.eth0.unres_qlen = 3
net.ipv6.neigh.lo.anycast_delay = 99
net.ipv6.neigh.lo.app_solicit = 0
net.ipv6.neigh.lo.base_reachable_time = 30
net.ipv6.neigh.lo.delay_first_probe_time = 5
net.ipv6.neigh.lo.gc_stale_time = 60
net.ipv6.neigh.lo.locktime = 0
net.ipv6.neigh.lo.mcast_solicit = 3
net.ipv6.neigh.lo.proxy_delay = 79
net.ipv6.neigh.lo.proxy_qlen = 64
net.ipv6.neigh.lo.retrans_time = 1000
net.ipv6.neigh.lo.ucast_solicit = 3
net.ipv6.neigh.lo.unres_qlen = 3
net.ipv6.route.flush =
net.ipv6.route.gc_elasticity = 0
net.ipv6.route.gc_interval = 30
net.ipv6.route.gc_min_interval = 0
net.ipv6.route.gc_thresh = 1024
net.ipv6.route.gc_timeout = 60
net.ipv6.route.max_size = 4096
net.ipv6.route.min_adv_mss = 1
net.ipv6.route.mtu_expires = 600
net.token-ring.rif_timeout = 600000
net.unix.max_dgram_qlen = 10
sunrpc.nfs_debug = 0
sunrpc.nfsd_debug = 0
sunrpc.nlm_debug = 0
sunrpc.rpc_debug = 0
sunrpc.tcp_slot_table_entries = 16
sunrpc.udp_slot_table_entries = 16
vm.block_dump = 0
vm.dirty_background_ratio = 10
vm.dirty_expire_centisecs = 3000
vm.dirty_ratio = 40
vm.dirty_writeback_centisecs = 500
vm.hugetlb_shm_group = 0
vm.laptop_mode = 0
vm.legacy_va_layout = 0
vm.lower_zone_protection = 0
vm.max_map_count = 65536
vm.min_free_kbytes = 918
vm.nr_hugepages = 0
vm.nr_pdflush_threads = 2
vm.overcommit_memory = 0
vm.overcommit_ratio = 50
vm.page-cluster = 3
vm.swappiness = 60
vm.vfs_cache_pressure = 100
TRACE
Running with control file control.xml version 642 and changelist 703273
TRACE[E] [syxxcfsmgt.cpp:269]
CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE [iaxxccontrolfile.cpp:142]
CControlFile::getKeydbControlFileName()
Running with keydb file keydb.xml
TRACE[E] [syxxcfsmgt.cpp:269]
CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE [iaxxccontrolfile.cpp:235]
CControlFile::getDialogControlFileName()
Running with dialog control file dialog.xml
TRACE [iaxxccontrolfile.cpp:184]
CControlFile::getResourecFileName()
Running with resource file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/helppool.xml
INFO 2006-07-24 10:23:29 [syxxcfile.cpp:446]
CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-07-24 10:23:29 [syuxcpath.cpp:369]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/q0w9e9r8t7.1.xml.
INFO 2006-07-24 10:23:30 [iaxxclib.cpp:83]
load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
load()
Opened iaccdlib.so
INFO 2006-07-24 10:23:30 [iaxxclib.cpp:108]
load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|checkRuntimeSystem
INFO 2006-07-24 10:23:30 [iaxxclib.cpp:83]
load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
load()
Opened iamodos.so
INFO 2006-07-24 10:23:30 [iaxxclib.cpp:108]
load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step checkRuntimeSystem with key Preinstall|ind|ind|ind|ind|ind|0|checkRuntimeSystem has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|SetDefaults
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step SetDefaults with key Preinstall|ind|ind|ind|ind|ind|0|SetDefaults has been executed successfully.
INFO 2006-07-24 10:23:31 [syxxcfile.cpp:446]
CSyFileImpl::copy(const CSyPath & /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml.
INFO 2006-07-24 10:23:31 [syuxcpath.cpp:369]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diSummarize
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step diSummarize with key Preinstall|ind|ind|ind|ind|ind|0|diSummarize has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diProgress
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step diProgress with key Preinstall|ind|ind|ind|ind|ind|0|diProgress has been executed successfully.
INFO 2006-07-24 10:23:32 [syuxcpath.cpp:369]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/summary.html.
PHASE 2006-07-24 10:23:32 [iaxxcwalker.cpp:416]
CDomWalker::printPhaseInfo()
Prepare the installation program.
INFO 2006-07-24 10:23:48 [iaxxcwalker.cpp:59]
CDomWalker::walk()
Installation start: Monday, 24 July 2006, 10:23:26; installation directory: /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST; product to be installed: SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Custom Installation - Java System
TRACE<i> [iaxxclib.cpp:83]
load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
load()
Opened iamodora.so
TRACE<i> [iaxxclib.cpp:108]
load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxccntrl.cpp:398]
CController::activateEvaluator()
The controller registered the module COraInputChecker
TRACE<i> [iaxxclib.cpp:83]
load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
load()
Opened iamodada.so
TRACE<i> [iaxxclib.cpp:108]
load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxccntrl.cpp:398]
CController::activateEvaluator()
The controller registered the module CIaSdbActor
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|fillContext
INFO 2006-07-24 10:23:48 [iaxxclib.cpp:83]
load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
load()
Opened iajsmod.so
INFO 2006-07-24 10:23:48 [iaxxclib.cpp:108]
load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
t_J2EE_Dialogs.remove(WHERE 1=1)
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
t_J2EE_Dialogs.insertRow({
di:false
oneHost:true
}), inserting
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step fillContext with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|fillContext has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|readProductXml
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
Reading additional shipment information from product.xml...
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
tProductInfo.updateRow({
Name:WebAs
Version:640
}, WHERE ROWNUM=0), updating
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
IA_CONTR_DBPLATFORM.updateRow({
DBPLATFORM:ORA
}, WHERE ROWNUM=0), updating
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
Table: tWhat
Name:What
Value:INST
Name:InstanceType
Value:DI
Name:DbType
Value:NEWDB
Name:DataType
Value:SAP
Name:MigType
Value:STD
Name:INQMY
Value:NO
Name:IsCluster
Value:NO
Name:IsClusterA
Value:NO
Name:IsClusterB
Value:NO
Name:UNICODE
Value:YES
Name:Db6Engine
Value:EE
Name:IGS
Value:YES
Name:CCM4X
Value:NO
Name:HETFS
Value:false
Name:LCCLIENT
Value:false
Name:J2EE630
Value:false
Name:DB2Connectivity
Value:DRDA
Name:SDM_JDBCDRIVER_DB4
Value:engine
Name:LCUSERDATAADMIN
Value:false
Name:SeparateSCS
Value:false
Name:EEENodeNumber
Value:EEENode0
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step readProductXml with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|readProductXml has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
t_systems.remove(WHERE 1=1)
INFO 2006-07-24 10:23:49
CJSlibModule::writeInfo_impl()
Looking for SAP system instances installed on this host...
INFO 2006-07-24 10:23:49
CJSlibModule::writeInfo_impl()
No installed instances found!
TRACE [syxxcnamrs.cpp:278]
PSyHostsEntry CSyIPNameResolverImpl::getHostByName(const iastring& hostName) const
IP name localhost resolves to IP address(es): 127.0.0.1
TRACE [syxxcnamrs.cpp:208]
PSyHostsEntry CSyIPNameResolverImpl::getHostByAddress(const iastring& ipAddress) const
IP address 127.0.0.1 resolves to IP name(s): localhost
TRACE [iaxxbhosts.cpp:674]
CIaOsHosts::resolveHostName()
hostname after reverse lookup is: localhost
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
shells.updateRow({
shell:/bin/bash
}, WHERE shell='/bin/bash'), inserting
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step setDefaults with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|DNSCheck
INFO 2006-07-24 10:23:50
CJSlibModule::writeInfo_impl()
DNS is configured correctly.
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step DNSCheck with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|DNSCheck has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|MemoryCheck
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step MemoryCheck with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|MemoryCheck has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|virtualHostCheck
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step virtualHostCheck with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|virtualHostCheck has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askWhat
INFO 2006-07-24 10:23:51 [iaxxclib.cpp:83]
load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
load()
Opened iamodutl.so
INFO 2006-07-24 10:23:51 [iaxxclib.cpp:108]
load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step askWhat with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askWhat has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askPrep
TRACE [iaxxgenimp.cpp:189]
showDialog()
showing dlg d_webas630_prepare_ci_unix
TRACE [iaxxgenimp.cpp:205]
showDialog()
<dialog sid="d_webas630_prepare_ci_unix">
<dialog/>
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
profile directory '/sapmnt/J2E/profile' does not exist. Returning undefined.
TRACE [iaxxgenimp.cpp:212]
showDialog()
<dialog sid="d_webas630_prepare_ci_unix">
<dialog/>
TRACE [iaxxccntrl.cpp:493]
CController::stepExecuted()
The step askPrep with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askPrep has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|getJavaHome
TRACE [iaxxgenimp.cpp:189]
showDialog()
showing dlg diCdServerMissingPackageWithCdName
TRACE [iaxxgenimp.cpp:205]
showDialog()
<dialog sid="diCdServerMissingPackageWithCdName">
<dialog/>
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:98]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE [iaxxgenimp.cpp:212]
showDialog()
<dialog sid="diCdServerMissingPackageWithCdName">
<dialog/>
INFO 2006-07-24 10:24:17 [syxxcfile.cpp:446]
CSyFileImpl::copy(const CSyPath & ., ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file /root/backupmnt/temp/51030724_2/DVD_NW_04_SR1_SAP_Web_AS_JAVA/J2EE_OSINDEP/JDKVersion.xml to: ..
INFO 2006-07-24 10:24:17 [syuxcpath.cpp:369]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/JDKVersion.xml.
TRACE [syuxctask.cpp:1242]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 3706
ERROR 2006-07-24 10:24:17 [iaxxbprocess.cpp:927]
CIaOsProcess::getReturnCode_impl()
FSL-04005 Unable to wait for process with ID 3706. No child processes
ERROR 2006-07-24 10:24:17 [iaxxbprocess.cpp:948]
CIaOsProcess::getReturnCode_impl()
FSL-04006 A system call failed due to unknown reasons: A process could not be waited for. No child processes.
TRACE [iaxxejsbas.hpp:270]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown std::ESyException: A process could not be waited for. No child processes
WARNING 2006-07-24 10:24:17 [iaxxccntrl.cpp:477]
CController::stepExecuted()
The step getJavaHome with step key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|getJavaHome was executed with status ERROR.
TRACE [iaxxcsihlp.hpp:301]
main()
An error occurred during the installation of component SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Custom Installation - Java System. Press the log view button to get extended error information or press OK to terminate the installation. Log files are written to SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Custom Installation - Java System.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:180]
CDialogHandler::doHandleDoc()
ACTION_OK received
WARNING 2006-07-24 10:24:41 [iaxxcsihlp.hpp:250]
main()
An error occurred during the installation.
Has anybody an idea whats wrong here?
thanxThanx Jeff!
and sorry for replying so late
like with many other things, reading notes carefully can help a lot
problem was solved by setting
LD_ASSUME_KERNEL=2.4.1
for sapinst as described in sap note 722273
Maybe you are looking for
-
Xorg 1.9 fails to initialize on a usb-installation of Arch [SOLVED]
As a side project, I decided to install Arch on a usb drive. I just installed Xorg (using the group). Thus far, I've run xorg -configure, then moved the xorg.conf.new to /etc/X11/xorg.conf I added in a "Synaptics" section, since this is on a laptop r
-
How do you subscribe to photo feeds?
Hi! Could someone please tell me how to subscribe to photo feeds? I know where the option is in iPhoto but when I tried typing in the URL for a deviantArt picture group that I was interested in receiving it did not allow me to do it. Which websites d
-
Error: EPM Architect on Shared Services Console
Hi, While accessing the EPM Architect on Shared Services Console, I found the below error message: "Error: Unable to connect to "EPM Architect", ensure that the application is up and running and the user has the appropriate rights to access this feat
-
Greetings, My beloved iMac 24", early 2009, is running very slow. So, so slow. It seems to take ages to open sites and also opening items from the Dock is almost impossible. I've read and researched and tried things as far as my limited computer skil
-
Hi everyone, I am doing some practices and create all the practices program in local Package $TMP. now it seems a bit disarray, so I want to create some package in $TMP in order to sort out the programs. I create a Package $TMP_XML, the software comp