Error in installing BPC 5.1

Hi experts,
When we are trying to install BPC 5.1 then we are geting error saying that "System Exception:Can not create ActiveX component".
Can anyone plz suggest the solution.
Thanks in advance.
Regards,
Prakash

I think your problem is related to rights of installation user.
It should be administartot into that computer.
Or it is related to the fact that installation of SQL, OLAP was not done with default instances and in that case you have to specified the right instances during the installation of SAP BPC.
Also can you please provide the information what version of SAP BPC 5.1 are you trying to install?
When you launch the installation of SAP BPC are you using startup.exe or setup.exe.
You have to use startup.exe
Let me know if any of suggestion help if not I will try to provide others.
Regards
Sorin Radulescu

Similar Messages

  • Self Registration error while installing BPC on windows 7

    Hi all,
    While I am installing BPC NW 7.0 client on my Windows 7(64 bit), I am getting following popup
    Self Registration Error
    1. C:\WINDOWS\SYSWOW64\asycfilt.dll
                                            The Specified procedure could not be found
    The same above is listed for following dll's.
    2, msvcirt.dll
    3. msvcp60.dll
    4. msvcrt.dll
    Along with above, it give me following error
    5. C:\WINDOWS\SYSWOW64\oleuaut32.dll
                                             Accessed Denied
    6. C:\WINDOWS\SYSWOW64\stdole2.dll
                                            Error accessing the OLE registry.
    It installed successfully after pressing ok.
    Have anyone faced/resolved this issue  and what are the effect of above error with respect to functionality of the s/w?
    Please help,
    Diksha Chopra.

    Hi Scott,
    Thanks for your answer. It was really helpful.
    Can you do me a favor and look at my other post if possible.
    Error Loading Rate data through Data Manger Pakage
    Your help is appreciated.
    Regards,
    Diksha Chopra.

  • Proactive caching Error while installing BPC 7.0 SP6

    All,
    We are installing BPC 7.0 sp 6 on Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (Intel X86)   Jul  9 2008 14:43:34   Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2)
    In short SQL 2008 Standard Edition. Will BPC 7.0 work with it?
    We tried to install the BPC and recived the "Proactive caching" errors. I know we will need this feature for ROLAP.
    Can we keep Standard Edition and make it work? Or we will need EE of SQL for BPC to work?
    Thanks for your help.
    Sam
    Edited by: Sam Patel on Mar 24, 2010 10:05 AM

    SQL Server EE is required for all SAP BPC Microsoft versions.
    BPC is using functionalities from SSAS delivery just with EE.
    Proactive caching is one the features available just into EE not into SE. But are also other features used by BPC from SSAS which can be found just into EE.
    It is true that actually just for SSAS we require EE, for all other componetnts we don't really need EE.
    So the installation will work, but of course you will have some limitations coming from Microsoft.
    For example SQL Server SE is able to handle maximum 4 processors.
    RS can not be installed into Web farm if you are using SE
    And many others.
    I hope this will help you to have a bteer view about what is reguired and why.
    Regards
    Sorin Radulescu
    Edited by: Sorin Radulescu on Mar 25, 2010 2:39 PM

  • Errors in Installing BPC 7.0 MS Version

    HI Friends
    Wish you all an advance happy new year.
    We are getting som errors while accessing the BPC Excel.
    When we are tryin to login to BPC Excel for planing application it is saying that "CANNOT DOWNLOAD ACCOUNT MEMBER INFORMATION" , even though the Account Dimension has members.
    After clicking OK i am not able to view the "CURRENT VIEW" in the BPC Excel Action Pane other than the ACCOUNT DIMENION ONLY but without any members.
    When i click the Account Dimension , i am not able to view any members of the Account Dimension and it is showing an error that "RUN TIME ERROR 91, OBJECT VARIABLE OR WITH BLOCK VARIABLE NOT SET"
    After clicking ok i am another error "AUTOMATION ERROR"
    looking forward to your help on this issues.
    Regards

    A couple of ideas.  What service pack are you on?  When you log into ApShell, do you get the same issue?  If so, make sure you have enable the add-ins by navigating to Tools->Macros->Security.  Make sure OutlookSoft is listed in the Trusted Publishers and that Trust all installed add-ins and templates is checked.
    If you don't have the issue in Apshell, then there could be something wrong with your dimension.  Before you check that, login to your AppSet and go to ETools->Client Options and choose Clear local application information.  This will log you out and cause you to go through the connection wizard again.
    If you are still having the same issue after logging back in, make sure the dimension is setup correctly (ID's can have a max of 20 chars without any special characters, other than "_" and ".").  If you don't have any data in the database/cube, try deleting all members within Account dimension, expept for one member and reprocess the dimension with a Full Process.  Log back into BPC for Excel to see if you are still having the same problem.  If so, follow the same process with the rest of the dimensions.
    Hope this helps.

  • Install BPC for Office memory error

    Hi, I have a Windows 7 workstation with 8Gb of RAM.  When I try to install BPC for Office, I get the following error:  'Not enough memory.  A minimum of 64 MB of memory is require."  How do I get around it?

    Hi
    As per Sorinu2019s response, until 7.5 there is no official support for Windows 7 or 64-bit operating system.
    However, with that said, if you still wish to progress at your own risk, then you can do so.
    You will first need to get Microsoft .Net 1.1 (32-Bit) installed and configured.
    Then you can install BPC client. However, you cannot install the client from the OSOFT WebPage, else you will receive 'Not enough memoryu2019 error.
    You will need to copy the two executables for the client installation (EverestAdmin and EverestClient) to the client PC and install by running these executables. You must be logged onto the client PC as an account with full local Administrator privileges, and you must also be logged in as an account with full local Administrator privileges for first logon to BPC Admin and BPC Office client.
    Be aware that certain functionality may not work as expected, for example PDF Publishing.
    Regards
    Shaam

  • Error logging in BPC 7.0 NW Excel

    Hi,
    I am using BPC 7.0 NW version.
    I get an error message while logging in to the Excel.
    Whenever I open BPC excel, a message pops up telling
    macros have been disabled.
    file path: C:/program files/bpc/Ev4Excel.xla
    This message has two options: Enable or Disable macros.
    If I choose Enable, it display one more message
    object library invalid or contains references to object definitions that could not be found
    If I choose Disable also, the same message.
    I have tried re-installing BPC Excel and Office 2007, but didnt help in any way.
    Kindly help.

    Hello Nilanjan
    I am facing the same prob....how did you solve your problem so that I can also solve the problem.
    Thanks
    ark

  • Host process rundll32 has stopped working while Installing BPC 7.5

    Hi guys,
    while installing BPC on Windows 2008 R2, the installation programs shows the message
    Host process rundll32 has stopped working.
    According to SAP Note 1498480 - Windows host process (Rundll32) has stopped working, i have followed the recommendations:
    32bit Compatibility Mode ON
    C:\inetpub\AdminScripts>cscript.exe adsutil.vbs set W3SVC/AppPools/Enable32BitAp
    pOnWin64 "true"
    Microsoft (R) Windows Script Host Version 5.8
    Copyright (C) Microsoft Corporation. All rights reserved.
    Enable32BitAppOnWin64           : (BOOLEAN) True
    Also disabled the Data Execution Prevention (DEP) and rebooted server.
    Then tried reinstalling IIS 7.0, rebooting the server, instaling it again but still showing the same error message.
    Any futher help on this would be highly appreciated.
    Regards!

    After a few restarts it worked

  • Installed BPC 7.0 for MS, but cannot connect to server in admin console

    I have installed BPC 7.0, and in the server manager, everything is ok, and seems to be running and there are no errors.  When I attempt to connect to the server with the Admin Console, I am getting the following error:
    "The sstem cannot connect to the XXXXX Application server.  Verify that you have Specified a valid Application server name, or see if the Application server is unavailable at this time"
    any help would be appreciated.

    Hi,
    I would request you to try few things.
    1. This is might be because there are other processes using port 1080.
       Log on to the application server via Remote Desktop.
       Open Task Manager and select the Processes tab.
       Select ManagementAgentNT.exe and choose End Process.
       Select RouterNT.exe and choose End Process.
       Log into IIS and START the Default Website.
    2. Another possible cause can be if the Server and Client are running different versions of BPC. If the version of BPC is different on the server and the client then an uninstall will need to be done on the client
    3. The APPINFO.XML file is corrupt. Delete the APPINFO.XML file located on the client machine in folder "My Documents\OutlookSoft" and login again using the connection wizard.
    Hope one of the above resolves your issue.

  • Problem with web BPC after installing BPC 7.0

    Hi all!
    We have installed BPC 7.0 for Microsoft. Diagnostics in Server Manager showed that everything is OK. But when we open BPC for Web an such error occurs:
    Server Error in '/OSoft' Application.
    Compilation Error
    Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
    Compiler Error Message: BC30456: 'Security' is not a member of 'Microsoft'.
    Thanks for help.

    Hi Denis,
    To fix this issue, you will need to install the Microsoft Anti-Cross Site Scripting Library, which provides protection to Web-based applications against Cross-Site Scripting (XSS) attacks.
    You can download it at the following URL:
    http://www.microsoft.com/downloads/details.aspx?familyid=efb9c819-53ff-4f82-bfafe11625130c25&
    displaylang=en
    After having installed it, you will need to copy AntiXssLibrary.dll to <BPC_folder>\Websvr\Web\bin on both the BPC Application server and the BPC Web server.
    You can find more information about this process in the Installation Guide for SAP Business Planning and Consolidation 7.0, version for the Microsoft platform (p.24-25).
    Best regards,
    Julien

  • Question on installing BPC MS on 2008 server.

    I am installing BPC 7.0(MS) on 2008 server..
    when I hit startup.exe and fill the credentials..its starting the processes and stops at "CHECK SERVER ENVIRONMENTS" STEP.
    do you any one idea where and what to check..?
    Thanks,

    Hi,
    Its a single server installation and its on SAP BPC 7.0 on MS ,server : 2003 and sql : 2008
    sorry for my typo.
    I fixed it ..I did the server diagnostic and it gives me the error the sql backward copatabilit y is not installed.
    I installed and I intalled the sap bpc 7.0 successfully.
    Thanks,

  • Error while installing OWB

    Error while installing OWB
    after 50% install.. it says
    "Error in writing to file c:\oracle\ora9201\bin\oci.dll
    The process cannot access the file because it is being used by another process"
    Apparently I have restarted the workstation and closed all oracle related services in services and no other program is running expect the installer.
    Can any one help in resolving the issue. Or can I hit the ignore button and continue installing?

    Always install OWB into a new ORACLE_HOME unless the Installation and Configuration Guide states otherwise. This has only happened twice. OWB 9.0.2.62.3 was the last version to allow installation into an existing ORACLE_HOME. Another thing you can do is go to www.sysinternals.com and download the utility LISTDLLs. It is great. From a command prompt, start it with the syntax: listdlls >log.txt
    This will output the DLLs in use and which executable is using it. Search for the DLL in the log.txt and scroll up until the double line. The executable name locking the DLL will be above the double line. If you have the Microsoft Distributed Transaction Coordinator Service running on the client, it will lock Oracle DLLs. This has been a common issue in the past, going back to the days of Data Mart Suite. This was documented in the Release Notes for it and may still be in the system in a note somewhere. It is in: DMS: Unable To Install; Filesopen/Service Running On Compaq Server Doc ID: Note:1080977.6 and Certain Files which need to be Reinstalled are Being Used Doc ID: Note:117672.1
    The first note I wrote back before 2000.
    Barry

  • Error while installing Oracle 10g on Fedora Core 1

    Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
    We have tried by using the on-line procedure and changing the required script to make believe it as said.

    Are you createing DB also???

  • Error while installing SQL Server 2012 X64 SP2,

    Error while installing SQL Server 2012 X64 SP2,
     When I installed the SQL Server 2012 X64 SP1, I got the attached error.
     What might be the issue here?
     Thank you
     Best
    Jamal

    Hello,
    Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
    Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
    Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Error while installing the NerWeaver Platform

    Error While installing the NetWeaver Instance
    Posted: Nov 22, 2004 2:37 PM        Reply      E-mail this post 
    When I am installing 'SAP NetWeaver Suite'the below error came, can someone help me out on this below error?
    MOS-01011 'C:\usr\sap\BWI\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
    The J2EE server is up unrunning @ the installing the Netweaver ABAP Instance I got this error.
    For the user BWI it has the Administrator previlages i checked so many time but I am unable to get it.
    Please help me out the error.

    Hi George,
    Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
    Regards
    Vivek

  • Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

    Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
    bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
    bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
    bash-3.00$ ./irca.sh
    Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
    (c) Copyright 2006 Oracle Corporation. All rights reserved.
    ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
    Please verify that the ORACLE_HOME is set correctly.
    bash-3.00$

    Hi Craig,
    Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
    So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
    Section :- Oracle Application Server 10g Release 3 (10.1.3)
    Regards,
    Praaksh.

Maybe you are looking for