Error in installing CE 7.1 SP3 on Windows Server / XP

I am trying to install CE 7.1 on Windows Server 2003 (version 5.2), SP1 but it fails the pre-requisite analysis giving the message:
Windows XP SP2 or higher and Windows Vista are the supported operating systems. The current version is: Version 5.2,
Service pack 1, Product type -Server.
Now if I try to install CE 7.1 in Windows XP SP2, I am not able to install the Enterprise Edition of SQL 2005 software because the Windows XP does not allow that. Only Professional edition of SQL 2005 is allowed in Windows XP SP2.
But the CE 7.1 package downloaded from SAP Marketplace contains the Enterprise edition of SQL only.
So I am not clear on which operating system should CE 7.1 be installed. If Windows XP is the answer, then wiil the Professional edition of SQL 2005 work fine for the CE 7.1 software?
Please give your inputs.
Edited by: Roshan03 on Dec 9, 2009 11:52 AM

Hi,
There is two flavors of CE, server and developer workplace.
You can easily install a developer workplace on XP with maxDB.
You can also install the developer workplace on WS 2003 with SqlServer, the pre-requisite analysis message is not blocking and you can continue your installation. Your CE will work perfectly well.
The last possibility is to install the Server version of CE on WS 2003. You will not have the pre-requisite analysis message.
Regards, Gilles.
Edited by: Gilles Godart on Dec 9, 2009 11:59 AM

Similar Messages

Error while installing SAP IDES ECC6.0 on windows server 2003.

Hi gurus,
I am getting error in installing SAP IDES ECC 6.0. In import ABAP step i am not able to execute all 19 services only 1 services is getting fail that is related to sapview.So,can anyone suggest me that how to solve this error and complete installation.
Thanks in Advace,
nainesh patadia.

C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100726222931
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100726223305
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
(DB) ERROR: db_connect rc = 256
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100726223306
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100726223709
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
(DB) ERROR: db_connect rc = 256
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100726223710
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100811085903
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
(DB) ERROR: db_connect rc = 256
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100811085911

Unable to Install JRUN 4 Updater 7 on windows server 2008 64 bit machine

Please help us on the error while installing jrun4, updater 7 on Microsoft Windows Server 2008 R2 Enterprise 64 bit operating system
The JVM installed on the machine is 32 bit.
I installed jrun on the machine successfully. When I try to add a web server using the web server configuration tool.
I get the below fatal windows error.
Windows package manager
Operation failed with 0x8007000B
An attempt was made to load a program with an incorrect format.
Please help....

Hi Charlie,
64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
I hope this was helpful.

Error while installing the BAM Updater Service in Windows

Hi all,
I am getting an error while installing the BAM updater service in Windows. When i type the "oraclebpmdatawarehouse install " command in the command prompt it gives error as follows:
d:\OraBPMEnterpriseHome\bin>oraclebpmwarehouse install
Installing...
wrapper | OpenSCManager failed - Access is denied. (0x5)
Please can anyone tell me how to get rid of this error.
I have already done everything else like setting the database and other things.
Thanks.

From the error message you specified, I guess you are trying to install MS Office SP2 package. If you are then its not MS Office package its just a Service Pack; something like a patch. You need to install a Full Base package first. Again, as mentioned by Rajiv - refer to MS Support

Error coming while installing Cisco Prime 4.2 on Windows Server 2008 R2

Hi,
I'm trying to install Cisco Prime 4.2 on Windows Server 2008 R2. While initiating the installation, message box "Error: csv not found" appears, and the installation terminates.
Is there any csv template need to be copied at any location before hand?

Are you installaing LMS 4.2.4 directly ?
Looking at the error ,it looks like ...
If yes then you need to follow the below path:
The installation path of LMS 4.2.4 : LMS 4.2 > LMS 4.2.2 > LMS 4.2.4
Thanks-
Afroz
[Do rate the useful post]

Error while Installing R/3 4.7 on windows with Oracle

Hello All,
I am getting this error while installing R/3 4.7 on windows
FSL-02097 The file system mounted on: C:\ does not support ACLs.
ERROR 2009-06-02 17:30:06
FSL-03006 Unknown exception caught when trying to add an entry to the service file.
ERROR 2009-06-02 17:30:06
MUT-02011 Internal error: A call to syslib failed. System error message: No error.
ERROR 2009-06-02 17:30:06
MUT-02011 Internal error: A call to syslib failed. System error message: No error
Please help me out
Rohit

Thanks for your inputs
I was able to continue the installation after that.During database Instance installation I get the following error:
CJS-00095 Error return code. DIAGNOSIS: Return code 35 of executable D:\oracle\ora92\bin\oradim indicates an error
The log files oradim.log says
"DIM-00035: You have entered and invalid option for the -EDIT command"
and sapinst_dev says:
" NFO 2009-06-04 14:42:50
 CJSlibModule::writeInfo_impl()
Output of D:\oracle\ora92/bin/oradim -NEW -SID IDS -STARTMODE manual -SRVCSTART system is written to the logfile oradim.log.
WARNING 2009-06-04 14:42:50
 CJSlibModule::writeWarning_impl()
Execution of the command "D:\oracle\ora92/bin/oradim -NEW -SID IDS -STARTMODE manual -SRVCSTART system" finished with return code 35. Output:
DIM-00035: You have entered and invalid option for the -EDIT command
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
oradim -NEW -SID IDS -STARTMODE manual -SRVCSTART system returns 35
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
oradim: Return codes indicating success are: [0]
ERROR 2009-06-04 14:42:50
 CJSlibModule::writeError_impl()
CJS-00095 Error return code. DIAGNOSIS: Return code 35 of executable D:\oracle\ora92/bin/oradim indicates an error. SOLUTION: See log file oradim.log for details.
TRACE [iaxxejsbas.hpp:270]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown std::ESAPinstJSError: ind-rel.ind-os.ora.badReturnCode
TRACE [iaxxcwalker.cpp:301]
 CDomWalker::processStep()
<html><head></head><body>An error occurred while processing service SAP R3E 4.7 Extension Set 2 SR1> ABAP System> Oracle> Non-Unicode> Database Instance Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li> <li>reset your input for the current task. In this case, SAPinst will permanently remove all installation files from the installation directory. This gives you the opportunity to restart from scratch.</li></ul>Log files are written to C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB.</body></html>
Please help
Rohit

Installation error while installing KB2956166 march cumulative updates for sharpeoint server 2013

I am getting error while installing KB2956166 march cumulative updates for sharpeoint server 2013 on windows server 2012 R2.
i have already installed KB2956159 CU.
can you guide me what is best way to install it?
Thanks,
Deepak

Hi,
KB 2956159 - SharePoint Foundation 2013 March 2015 CU
KB 2956166 - SharePoint Server 2013 March 2015 CU
http://blogs.technet.com/b/stefan_gossner/archive/2015/03/10/march-2015-cu-for-sharepoint-2013-has-been-released.aspx
If you are using SharePoint server 2013, you need to install updates package for Server, i.e. KB 2956166.
Here is a similar issue:
http://sharepoint.stackexchange.com/questions/104495/undo-wrong-installation-of-sharepoint-2013-service-pack
If it doesn't help, you might refer to this article:
http://blogs.msdn.com/b/george_bethanis/archive/2014/08/28/sharepoint-server-2013-can-you-uninstall-patches.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KC

Hi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC

Install Active Directory Domain Controller on Windows server 2008 enterprise, dont login on Sql Server 2008 R2

I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!

Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support

Number of unusual challenges observed while installing BO 4.1 SP5 on windows server

Hello All ,
We are facing a handful of unusual challenges while installing BO 4.1 SP5 on Windows Server .
While installing the license key provided during installation is not showing up in CMC . Under CMC the license key section is showing BLANK when we are opening it for the first time . So we have to add the license key again via CMC .
Even after adding the license key following issue continue to persist -
CCM tool is not opening with an error which usually appears to be a Visual C++ library error but appears to be not the case -
WebIntelligenceProcessingServer unable to start as it failed to start 5 times in 60 seconds
CMS is unable to contact ConnectionServer32 .
We performed E2E tracing and the GLF log files had lines like these - (1)assert failure: (.\oscafactory2.cpp:3220). (false : OSCASimpleFactory2::triggerStateChangeNotifications - Unexpected exception).(2)assert failure: (.\isgenadm.cpp:315). (false : CISGeneralAdmin_impl::setParamEx - caught unexpected model state exception).
the GLF file errors indicated that this could be an issue similar to SAP Note- 1961070 where it indicates that this could be a license key issue . However we performed a license key check using BI platform support tool which indicated there is nothing wrong in the license key .
We are now at a complete dead-end and unable to understand what could be the issue here we have uninstalled and reinstalled thrice but no luck. Experienced practitioners kindly help me out on this.

Hello Henry ,
Thanks for your prompt response . Initially the server indeed had critical Visual C++ patches missing ;which we have rectified to some extent and also installed Visual C++ 2008 MFC security patch .
Initial Patch level
Current Patch level
I am going ahead with the suggestion provided in SAP Note 1902990 and will keep everyone posted on this. I had an impression that perhaps the 2008 MFC security patch will do the trick for me .
Thanks !

Installing PeopleSoft HRMS 9.0 on Windows Server 2008 with SQL Server 2008

Hi there,
Recently I was involved to develop a POC with PeopleSoft and as I was very new to PeopleSoft, I had bunch of issues while installing PeopleSoft. It took me almost more than couple of weeks to finally get the PeopleSoft Application up and running.
I had bunch of questions also asked in this Oracle forum like :
Step by Step PeopleSoft HRMS Installation from scratch.
Tuxedo10gR3VS2008 patches absolutely needed for Peopetools Installation
Thanks to the replies from all you folks. That helped a lot. Anyways, so I thought of just writing a blog about the things I did while installing PeopleSoft on Windows with SQL as backend DB. There are many posts already on the web describing the steps but mostly with Oracle DB and Linux. Hence, here are the posts for PeopleSoft on Windows:
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx
Hope it helps to newbie's in PeopleSoft Apps like me.
Regards,
Vishal Mody
Edited by: 897150 on Jan 25, 2012 10:11 AM
Edited by: 897150 on Jan 25, 2012 10:13 AM

Vijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

Error -36 alert displays when connecting to a Windows server

Hi All
I am getting error -36 when I tried to copy any file or folder from windows server
"Error -36 alert displays when connecting to a Windows server"
Even the file info is zero KB, while from other MAC machine it is right size.

You shouldn't get the same error when you are doing it from Terminal. The error should be a little different. I just did a test. Is this a Microsoft 2003 server, 2000 or NT4 you are connecting to? Your post isn't specific. Make sure the System Preferences:Network:Advanced:WINS tab is filled in with the domain you are connecting to next to the "Workgroup" name. The WINS server should already be filled in. Open the connect window with command K. Type domainname\username for the login and then the password. If you don't want to enter the domain each time you will need to add the domain in the Applications:Utilities:Directory Uitility application.
If you are trying to connect to a Windows XP client box, the machine will automatically try to authenticate with the guest account not the username and password you are using even when "registered user" is ticked. You have to edit the registry to change this default. If the username from the Windows PC is the same as the user logon then this is why the PC is able to connect and the mac is not.

Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server

Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server
http://docs.info.apple.com/article.html?artnum=301580
A user meet the above problem connecting to Windows 2003 server but have no this error if connected to Windows 2000 Server.
According to the above solution, will you configure Windows 2003 server or just configure user's Macintosh platform?

EL2006 wrote:
Actually, win2003 server's default security options are shown as follows.
1. MS network client: Digitally sign communications (always) - Disabled
2. MS network client: Digitally sign communications (if server agrees) - Enabled
3. MS network server: Digitally sign communications (always) - Disabled
4. MS network server: Digitally sign communications (if client agrees) - Disabled
We could both be right on this one; it depends on your setup. By default, if you're running a domain then the Domain Controller is:
*Microsoft network client: Digitally sign communications (always) Policy Setting: not defined*
That defaults to the Group Policy setting, which is enabled.
The local computer group policy for Windows Server 2003 is:
*Microsoft network client: Digitally sign communications (always) Security Setting: disabled*
I'm referencing this KB article on Microsoft's website: <http://support.microsoft.com/kb/887429>.
This does not take into consideration that you may have upgraded from Windows 2000 Server to Windows Server 2003.
Regardless, you seem to have already eliminated this as a possibility as you mention below.
In my case, user can connect to win2003 server without problem in the same LAN 192.168.8.x. If connect it from remote lan 192.168.10.x (e.g. smb://192.168.8.250/artwork) error -36 will appear. Since remote lan is connected to local lan by secured VPN, all traffic or any ports are allowed to passe through VPN.
Rather than a server or client problem I would speculate your VPN connection is the problem. Do you have port TCP 445 open or blocked at your VPN concentrator? I believe this needs to be open.
Hope this helps!
bill

Install ID CS4 Desktop version in Windows Server 2003

Is it possible to install Indesign CS4 Desktop Version on Windows Server 2003.
When i tried to install it was showing Warning with the message
System requirements not met.
Regards,
Suresh

It can be installed.

Error in installing CE 7.1 SP3 on Windows Server / XP

Similar Messages

Maybe you are looking for